Change "Services and applications" names in failover cluster manager

Hi. Id like to change "Services and applications" names in failover cluster manager for Windows Server 2008 R2.
I right click on one and press rename, but when i change the name and press enter i get the message "To rename this service or application please rename the Client Access Point via its property page"
It's important that we don't change the network name for the service

Hi,
Checkout this blog post
PowerShell for Failover Clustering: Let’s Rename a Few Things
But keep in mind if you rename the resources and you are using them in a script or backup you need to check this also with the new name.
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

Similar Messages

"Services and Applications" is missing from the Failover cluster manager menu

Hi,
I am not sure this is the right group for my question, but I couldn't find anything else more suitable.
In my Hyper-V installation (Windows 2012 Data Center), I am missing "Services and Applications". I am using Windows 8 to manage the cluster and I need this menu to import an existing VM into the cluster. How can I get this option or is there a
software that I need to install?
Thanks

Repost here: http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/threads
in the Hyper-V forum. You'll get a lot more help there.
This forum is for Virtual Server 2005.

One of cloud doesn't work in failover with Event ID 1205 and 1069 and unable to move services and application another node

Any one please respond.
I've been working on creating a windows server 2008 R2 cluster for about a month now and I keep getting an error whenever I try to add a 2nd node. I keep
getting The cluster node is not reachable. However, when I validate the configuration, everything goes through success. I created and destroyed the cluster a couple of times, but no luck. I even re-installed Windows Server 2008 R2 on both servers, re-configured
the iSCSI, and the same warning keeps coming up.
I installed a new a new SQL Server 2008R2 Named Instance on an exisiting SQL Server cluster node (Node 1 &Node2). When I try to manually fail
over
the Services and applications to another node (Node1 to node2) using Failover Cluster Manager, I get the errors
The cluster has these Events:
Event ID
1069: Cluster resource 'IP Address xx.xx.xx.xx' in clustered service or application 'ClusterDtc' failed.
Event ID 1205:The Cluster service failed to bring clustered service or application 'ClusterDtc' completely online
or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application..
Why the cloud server doesn’t move to node2? you can see screen shorts below.
1.
in system configuration-
3. in
system configuration---->warning--->Validate All Drivers Signed
after creating cluster I got below errors.
Any info you might know would be really helpful.

Dear Ravikumar
From clone support they given reply mail...
mail from Ramu...
That would be a typical work around in this situation. But what we intend to do cannot be accomplished through this work around as we need the validations to complete successfully.
We are looking for an option either to get the driver signed or use a different signed adapter for the same. Could you please suggest us something on that line.
Mail from Support....
Hello,
Unfortunately this is not something that we would be able to do in a virtual environment; You are welcome to try different drivers however we would not be able to provide any support
for untrusted drivers. The only true solution would be to upgrade from a VM to a dedicated server where you would have control of all the drivers as there is no virtualization layer to
contend with. Stepping into the territory of untested drivers for a custom configuration in a virtual environment will certainly prove to be an uphill battle.
I would advise contacting Microsoft's support for additional assistance as they will be able to provide the most accurate information regarding this concern.
Regards
Systems Administrator

In cluster Manager there are no services and application listed on a node.. what does this mean?

In Cluster Manager I can see two nodes listed.
When I click on the first it lists the two SQL Server instances.
On the other node there are no services and application listed....what does this mean?
Mr Shaw

Yes Instance A and Instance B will also be installed in the second node.
Just go to configuration manager in the other node, you will see those instances in stopped state.
Assume I install Instance A in a 2 node cluster with node A and Node B, it installs instanceA binaries in both nodes, What it does when failover is shutdown Instance A in Node A, move the disks to node B and start the instance A in the node B. Its basically
the same instance.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
Oh I get you..
The missing bit on the puzzle is that the binaries are installed on both nodes at the same time.
Thanks,
Ben
Mr Shaw

I want to change IP and Host Name of application serve

our application server is on IBM AIX platform and now i want to change IP and Host Name of application server?

Hi Again;
For Ip please see:
How to change the IP Address for a Release 11i Instance ? [ID 364099.1]
How to Change IP Address in an Oracle Applications Environment [ID 553318.1]
PS:Please mention your EBS version
Regard
Helios

The lease timeout between avaiability group and the Windows Server Failover Cluster has expired

Hi,
I am having some issues where I get a lease timeout from time to time. I have a Windows 2012 Failover Cluster with 2 nodes and 2 SQL 2012 Always-on Availability Groups. Both nodes
are a physical machines and each node is the primary for an AG.
From what I understand if
the HealhCheckTimeout
is exceeded without the signal exchange the lease is declared 'expired' and the SQL Server resource dll reports that the SQL Server availability group no longer 'looks alive' to the Windows cluster manager. Here are the properties I have setup
which are the default settings:
LeaseTimeout - 20000
HealthCheckTimeout - 30000
VerboseLoging - 0>
FailureConditionLevel – 3
Here are the events that occur in the Application Event Viewer:
Event ID 19407:
The lease between availability group 'AG_NAME' and the Windows Server Failover Cluster has expired. A connectivity issue occurred between the instance of SQL Server and the Windows Server Failover
Cluster. To determine whether the availability group is failing over correctly, check the corresponding availability group resource in the Windows Server Failover Cluster.
Event ID 35285:
The recovery LSN (120881:37533:1) was identified for the database with ID 32. This is an informational message only. No user action is required.
SQl server logs are too long to post in this box but I can send them if you request.
The AG is setup to failover automatically but it did not failover. I am trying to figure out why the lease timed out. Thanks.

From what I've been able to find out, this is due to an issue with the procedure sp_server_diagnostics. It sounds like the cluster is expecting this procedure to regularly log good status "Clean" in the log files, but the procedure is designed not
to flood the logs with "Clean" messages, so only reports changes, and does not make an entry when the last status was "Clean" and the current status is "Clean". The result is that the cluster looks to be unresponsive. However, once it initiates
the failover, the primary machine responds, since it was never really down, and the failover operation stops.
The end result is that there really never is a failover, but the database becomes unavailable for a few minutes while this is resolved.
I'm going to try setting the cluster's failure condition level to 2 (instead of 3) and see if that prevents the down time.
blogs.msdn.com/b/sql_pfe_blog/archive/2013/04/08/sql-2012-alwayson-availability-groups-automatic-failover-doesn-t-occur-or-does-it-a-look-at-the-logs.aspx

Change seller and developer name at AppStore

Hi,
I am new member,
I like to know how to change seller and developer name in AppStore?
I wish change to my wife name as special give to her on our special day
Most the suggestion from the making of this app are from her ideas.
I hope this will make my wife very proud and happy
Thank you for your help

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

BADI for changing Appraisal document application name for Web dynpro ABAP

Hi,
For Appraisal document customizing through PHAP_CATALOG_PA, We have BADI HRHAP00_BSP_TMPL to change the BSP application name which can be used in Web layout for output display. Using this we can change application name from HAP_DOCUMENT to custom BSP application name
Similarly, what is the BADI for changing Web dynpro ABAP applictaion name? Currently its triggering HAP_MAIN_DOCUMENT.
how do we change application name to some custom web dynpro application name
Regards,
Kothand

Hi Karim,
I don't know, if there is any chance to get the Webdynpro application name. At least in the ABAP System fields is no information about the webdynpro application name.
One remark: I have allways problems with BAPIS / BADIS that behave different depending on the caller. Could it be a good idea to pass some information through the interface / parameters?
Best regards
Renald

How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)

I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

please post you question on failover clusters in the cluster forum. THey will explain how this works and point you at scipts.
You should also look in the Gallery for cluster management scripts.
¯\_(ツ)_/¯

How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster) with scrpiting

I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

You are trying to implement manually what should be happening automatically in the cluster. If the primary SQL Server becomes unavailable in the data center, it should fail over to the secondary SQL Server automatically. Is that not working?
You also might want to run this configuration by some SQL experts. I am not a SQL expert, but if you have both hosts in the data center in a cluster, there is no need for replication between those two nodes as they would be accessing
the database from some form of shared storage. Then it looks like you are trying to implement Always On to the DR site. I'm not sure you can mix both types of failover in a single configuration.
FYI, it would make more sense to establish a file share witness in your DR site instead of placing a third node in the data center for Node Majority quorum.
. : | : . : | : . tim

SSIS - pass variables to Data Manager for Appset and Application name

Hi folks,
I'm building an SSIS package, and I can't work out how to set the Appset and Application names in the Convert Task item - I have created the item, and the variables, but I can't work out how to reference the two.
Any tips or help greatly appreciated - this is one of the worst-documented pieces of software I've ever seen!
Thanks,
Jason

Hi,
Please refer to the other SSIS packages already created. We need not set these parameters while creating the SSIS package. When we link the SSIS to DM package, we can dynamically send the appset name and the application names.
Hope this helps.

Change seller and developer name?

Hi,
I am new member, not sure if this the right section to asking question,
I like to know how to change seller and developer name in AppStore?
I wish change to my wife name as special give to her on our special day
Most the suggestion from the making of this app are from her ideas.
I hope this will make my wife very proud and happy
Thank you for your help

For Development based questions please use the Development Forum here:
https://discussions.apple.com/community/developer_forums

This.name and application.name different?

Hello,
how come that, within the application.cfc file, this.name and application.name are different?
Shouldn't this.name be inherited by the application? Isn't that confusing?
Thanks for clarification

If I recall correctly, you use this.name to set your application name in Application.cfc, and Application.applicationName to read it in other files. Application.name is just a variable you've created in the Application scope.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Network DR test causes Exchange DAG network to fail (Failover Cluster Manager reports comms errors)

We have a DAG configured between 2 mailbox servers, one in each of our main data centres. Our comms team recently performed a DR test between our 2 data centres, switiching from the main production link to the backup link. During this outage the Failover
Cluster Manager reported errors, with each mailbox server reporting the other as uncontactable. The Events that were logged include the following:
Isatap interface isatap.{02ADE20A-D5D4-437F-AD00-E6601F7E7A9D} is no longer active. (EventID 4201)
Cluster node 'MAILBOX_SERVER' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the
Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is
connected such as hubs, switches, or bridges. (EventID 1135)
File share witness resource 'File Share Witness (\\WITNESS_SERVER\SHARE_NAME)' failed to arbitrate for the file share '\\WITNESS_SERVER\SHARE_NAME'. Please ensure that file share '\\WITNESS_SERVER\SHARE_NAME' exists and is accessible by the cluster. (EventID
1564)
Cluster resource 'File Share Witness (\\\WITNESS_SERVER\SHARE_NAME)' in clustered service or application 'Cluster Group' failed. (EventID 1069)
The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. Run the Validate a Configuration wizard to check your network
configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges. (EventID 1177)
The Cluster Service service terminated with service-specific error A quorum of cluster nodes was not present to form a cluster. (EventID 7024)
The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service. (EventID 7031)
Looking at the Cluster Events in the Failover Cluster Manager Snap-In i see a heap of Event ID 47 (cannot activate the DAG databases as the server is not up according to Windows Failover Cluster Service) and:
Node status could not be recorded. This could prevent some network failure logic from functioning correctly. NodeStatus:IsHealthy=True,HasADAccess=True,ClusterErrorOverrideFalse,LastUpdate=5/2/2011 8:25:42 AMUTC Failure:An Active Manager operation failed.
Error: An error occurred while attempting a cluster operation. Error: Cluster API '"ClusterRegSetValue() failed with 0x6be. Error: The remote procedure call failed"' failed.. (EventID 184)
Forcefully dismounting all the locally mounted databases on server 'BACKUP_MAILBOX_SERVER. (EventID 307).
Our Comms team doesn't believe it is a comms issue as they did not log any network communication errors between the servers in the two sites (using icmp). So if it is not a comms issue, how can I configure the Failover Cluster Manager to be resilient to
this type of network failover event.
Thanks
Dan

Isn't it also true that in a stretched DAG with even numbered nodes, the PAM needs to be in the same site as the active DAG node? If the connection between both nodes goes down, and the PAM is in the "passive" site, the primary node will
dismount the databases since it can't check with the PAM to make sure its safe for it to be up.
In a even-numbered node stretched DAG, the PAM changes to the DR/passive site everytime a failover occurs, but doesn't automatically switch back when you reactivate the primary node.

2008 R2 SP1 failover cluster, after connect to VM from failover cluster manager console I've get only upper quourter of screen console

Hello :)
I have to ask because this issue is boring me a long time ago :(
From time to time when I connect to virtual machine from failover cluster manager console I've get virtual machine connection screen (console) which is reduced only to upper left quorter of full screen. There is no scroll bar ... If I live migrate
VM to another node (or restart VM on same node) and reconnect, console screen is displayed ok (ie all console screen is visible).
It is happening regardless of OS version installed into guest VM: 2003 R2, 2008 R2, 2012, 2012 R2).
I've check inside VM ( I can see that integration services are installed and running but when I click onto console window with mouse I've get message:
"Virtual Machine Connection
Mouse not captured in Remote Desktop session
The mouse is available in a Remote Desktop session when
integration services are installed in the guest operating
system...."
From SCVMM console I can see that IC version on guest VM is: 6.1.7601.17514
I would like to know what is going on and is there any way how can I detect those situation or even better how to prevent it ?
Thank you for any idea.
Best regards
Nenad

Hi Nenad,
As you mentioned you have tried 2003 R2, 2008 R2, 2012, 2012 R2 guest vm, but all this do not work properly, With Server 2003 platform the 2008r2 Hyper-V the 2003R2 are not
supported, in your case you must update to Windows Server 2003 R2 with Service Pack 2.
Server 2012 as guest vm on 2008r2 you must install the following hot fix:
You cannot run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
https://support2.microsoft.com/kb/2744129?wa=wsignin1.0
Server 2012 is the last version of Windows that will be supported as a guest operating system on 2008r2 Hyper-V therefore the 2012r2 guest vm is not supported.
Please use the following command can query all guest vm’s IC version, please compare this problematic vms IC version with functioning vms.
The following powershell command can be used to display the version of integration services installed on all VMs on the Hyper-V host:
PS C:\Users\administrator> get-vm | ft name, IntegrationServicesVersion
Name
IntegrationServicesVersion
TestVM2012
6.2.9200.16433
SQL01
6.2.9200.16433
SQL02
                                  6.2.9200.16433
SCVMM01
6.2.9200.16384
SCVMM02
6.2.9200.16384
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Change "Services and applications" names in failover cluster manager

Similar Messages

Maybe you are looking for