Change storage type during putaway
Hi,
I know it is possible to change the destination bin during putaway.
I set it in storage type and it works.
Is it possible to change also the storage type during putaway by SU (LM02) ?
Thank you
Best regards
Andrea
Hi, thank you for your reply.
The TO is just created.
I want to change the storage type during the confirmation of TO via RF using transaction LM02.
Is it possible?
Thanks
Similar Messages
-
Change storage type. Please
Hi Guys,
We are using storage type search
3 storage types are defined for the storage type indicator 001.
In WM we have over 20 different storage types.
The sorage type search works fine, it means that one of the 3
defined storage types is beeing found.
I know that the found storage type is meant as a proposal and that the user can change storage type/section/bin during processing of the transfer order (it means to select another of the restly 17 storage types defined in WM).
From business we got the requirement to avoid limit the change of the storage type and section (it means that the user should only be able to select one of the 3 storage types defined in the storage type search) , but still allow the change of the storage bin during manually processing of the TO.
The function "allow destination bin change" allows or avoids the entry of all 3 fields "storage type/storage section/storage bin". As we want onlz the bin to be changed, this functionality doesn't meet our requirement.
Do you know some options to achieve this ?
Thanks
ManuelHi
Go to transaction CMOd and create a project there and activate it
then find the user exits there for transaction CO01.
you will find it there.
Or go to SE84 and look for enhancement there.
thanks
Lalit Gupta -
I thought this would be easily solved with a few searches.. but no...
I'm trying to do some testing in a development box but i needed inventory to consume. So I did a 561 for god-awlful amount of stock so I don't have to do this again.
My problem is that the plant is WM managed. After the posting in IM I checked in LS26 and my stock is showing in storage type 998. I need it to be in storage type 108. I was able to get to a TO number in LS26. It has been confirmed.
What transaction can I use to change the storage type and what transactional data would I need.
I've searched using the following parameters
- SAP WM "How to" change storage type
- SAP WM 561
And several variations of the above.
Thanks!!
CraigOk.. I was in that screen earlier but had trouble with it. Went back to it again and finally got it! The key was to use 999 movement. I wasn't sure what to use there.
Thank!
Craig -
Change variable type during program flow
Hi there. Please tell me is there a possibility in ABAP to change variable type during program flow? I'd be very thanful for suggestions. Greetings.
hi,
Make use of field symbols for that ...
field-symbols : <fs> type any. -
SAP Warehouse Management change Storage Type Bin type while creating TO
My requirement is to find an exits which allow us to change the Destination Storage Bin and storage type when creating Transfer orders through Inbound Deliveries.
I have tried using "MWMTO003", "MWMTO004". But the problem here is that none of the funtion exits have both storage type and bin as exporting parameters.
The exit "EXIT_SAPLL03A_001" has Destination bin (LTAP-NLPLA) as a changing parameter but not Destination storage type.
I have activated the check box to trigger User exits using SPRO->LE->WhM->Master Data->Define Storage Type and Activate.
I got a BADI "LE_WM_STORAGETYPE_HU" with both Storage bin and type as changing parameters but then when I activate it and put a break point. My control never stops there.
Kindly Suggest what is the correct User Exit required for this?
Do i need two User Exits to change Storage Type and Storage Bin?
Kindly provide how to approach.I managed to change the casetype now by
1) Changing the corresponding SCMG_T_CASE_ATTR entry
2) Changing the record model POID in the XML file of the case, by manually parsing and replacing the XML
Still wondering if this is a valid approach, or if I've overlooked something... -
Transfer between storage types and putaway strategies
Dear All,
Here is my scenario and please guide me on as detailes as you gurus can on how to proceed achieve this:
When receiving good from a PO the materials are received in 902: How to move them to my Raw materials storage type?
Note: I have defined 4 storages types, one for raw materials, one for production, one for Finished goods and one for spare parts.
And once I move the materials into the warehouse, what strategies do I have to define in order to place the materials in specific bins? Here's an explanation on how I need the putaway:
I have 5 different racks or stacks but I need all materials to be placed in a specific row of the first level, lets say material A in 01-A-01 the first 2 digits are stack then level then row(SS-L-RR); Material B should be placed 01-A-02 Material C 01-A-03; meaning all the materials should be placed in the level A of stack 1 but if there is another recepit of material A and it is already full then the system should propose another bin doesn't matter which one as long as it is not in the first level (because this positions are reserved for other materials).
This is the same for materials D, E, F but those are to be placed in stack 02 in level A
I need this because that's the way my client work right now, it is like Lean manufacturing strategy, so whenever they need to pick materials they always have them available at the lowest level
Is there an automatic bin to bin TO creation for when the picking empty the bin at the lowest level then a TO should be triggered automaticaly saying move from whatever bin the material is available to the "fixed" bin assigned in level A
Stack 1 Stack 2
Level 1 2 3 Level 1 2 3
D free free free D free free free
C free free free C free free free
B free free free B free free free
A A B C A D E F
The variable here is that as I said before I have 5 Racks so in the other 3 stacks doesn't matter the levels, the materials can be placed wherever, and this will happen when receiving material A but all stack 1 is full then system should try to place it in the nearest bin available of stack 2 (only levels B, C, D) or if this is also full, then goes to stack 3 ( all levels available)
Please advise on how to map this, and the transactions and mvt types involved, and also please explain how should I make the picking or removal strategy to propose the picking always from the specific lower level bin, if not enough qty available then go and pick from other bin (and if it is possible at this point to create a TO to refill the fixed lower bin)
Thanks in advande to all.
JulioHi,
Try using movement type 313 and 315
313 -- Transfer posting SL to SL --- Remove from issuing SL
315 -- Transfer posting SL to SL -- Placing in Receiving SL
Regards -
Change storage type in transfer order
For next empty bin strategy, the transfer order proposes next empty bin in a given storage type. Via tx LT1E , it is possible to change a storage bin and quantity in the transfer order and confirm the same.
However, Our requirement is to change the storage type & storage bin in a transfer order already created. Is there any user exit or programme we can modify to do the sameHi,
Pls put in MM forums and get help immediately.
Regards,
Anil -
How to change pricing type during invoicing
Hello,
How can I change the pricing type from 'B' (which is in the copy rule VTFL) to 'D' during the invoicing regarding specific criteria like sales organization ?
Thank you by advance.
FabienIf the unit price in sale order differs from pricing master data (VK11) and in copy control, if "B" is maintained for the field "Pricing Type", system will consider the price from master data in billing. If you dont want this new price for that particular billing document, as suggested already, go to condition tab, click on "Update" button and again double click on "G".
But please note this will work ONLY if accounting document has not been generated. If accounting document has been generated, then this button (Update) in condition tab will become uneditable.
On the other hand, if for any particular billing type itself, if you dont want "B" to consider, then in VTFL itself, change it to "G" or whatever you require.
thanks
G. Lakshmipathi -
How to restrict the material for speific storage type
Dear all,
i am maintained the X - material to 001 warehouse and 001 rack storage type when i try to create TO for putaway process it will allow me some other storage type like open,shelf....as per my client requirement it should not be .....
i am using manual strategy for putaway proces ....kindly guide me....
Thanks
Muthuraman.DHi,
The storage types during Putaway are proposed based on the strategy defined.
Change the stcok placement indicator in WM view 1.
If you have a storage type search strategy defined that matches your requirement, then maintain the same in WM view 1 for the material
Hope this helps
regards -
Change destination storage during putaway
Folks,
I would need to be able to change the destination storage bin during putaway. I;ve set the indicator in the storage type, however, I am not able to change the destination bin. Any suggestions?
Thx,
MdZHi Csaba,
it was exactly what I read when I have this problem:
"No destination bin can be entered during confirmation for
dynamic coordinates
transfer orders with return subitems
Lean WM (if the destination bin is defined in the movement type)
posting change TOs
inventory based on putaway
additions to existing stock in storage units
stock removal from or putaway into bulk storage
two-step confirmation
transaction Confirm single item
the case where you are using a putaway strategy
all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
stock removals from a bulk storage managed with storage units"
As I wrote Continuous inventory upon placement into stock indicator must be unchecked.
Andrzej -
Dest.storag bin change during putaway foreground in LT04
HI
For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes,
Destination storage type, storage section and storage bin.
also purposes quant, storage unit .
Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
Storage type setting:
Putaway strategy is : I > addition to existing stock
Destination bin change during confirmation = 1 allowed ( i understand , it means we can change distination storage bin during TO confirmation )
Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
it purposes remaining elements like Quant, storge unit.
thanks
jamesHi All
question is
CAN we change destination storage section and storage bin on " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
I know we can change it on LT04 , main screen . and its working. my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
thanks
James -
Dest.storag bin change during putaway foreground
HI
For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes,
Destination storage type, storage section and storage bin.
also purposes quant, storage unit .
Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
Storage type setting:
Putaway strategy is : I > addition to existing stock
Destination bin change during confirmation = 1 allowed ( i understand , it means we can change distination storage bin during TO confirmation )
Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
it purposes remaining elements like Quant, storge unit.
thanks
James
Edited by: Csaba Szommer on Jan 6, 2012 8:10 AMHi All
question is
CAN we change destination storage section and storage bin on " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
I know we can change it on LT04 , main screen . and its working. my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
thanks
James -
SU Storage Type with Fixed Bin Putaway
Hi,
When I am activating SU for a new Storage type with Putaway strategy F then system gives the error as
" If you have st.pl.str. "Fixed bin", the area check must not be active" Message no. LT071
Does it mean Putaway strategy F is not to be used for SU managed storage Type?
or is there anyway to solve the above error?
Regards,
VengatI receive the same error (LT071) if I set T331-PRBER (storage section check active) whilst putaway strategy (T331-STEIN) is "F".
include: L0L12F01
form: T331_CHECK
comment for the error message:
..Strategie F mit Bereichsprüfung ist Blödsinn..
("Stratgey F with storage section check is foolishness")
Are you using T331-PRBER and T331-STEIN paralelly? If yes, why?
If I just activate SUM for a storage type with putaway strategy "F", there's no problem -
HU without inventory management and message L3778 in storage type 999
Hi experts,
Need suggestion on the process to add inventory of an HU with status 'HU without inventory Management'. This issue has occurred out of the below scenario:
1. our warehouse is HU & WM managed.
2. We have a transfer order for a delivery document requesting to pick up 100 cases of MAT1 which is assigned to HU1.
3. While confirming the transfer order user has confirmed difference for the full quantity of 100 because the SU/HU was not found in the bin.
4. The system has set the status of HU as 'HU without inventory Management'. The HU is empty.
5. system has moved the stock from the bin to difference storage type 999.
Now user has found the stock for this HU and he wants to post the stock back into the bin. system does not allow to move the stock back to bin using LT01 as we get error message 'L3 778'.
What will be the best practice to get the stock back into the bin and post the stock into the same old HU.
Is there a process wherein we can post this stock to another bin and repack into the old HU?
Thanks,
HarishThanks Manish on the hint. I was able to transfer stock to partner location and then bring back to original Storage type/Bin. Below steps was used to fixed the issue:
1. Initiate a transfer of stock from WM/HU Sloc where the IM stock resides into Sloc 9099. An outbound delivery is created during this process.
2. Create a transfer order with reference to delivery and pick the stock from 999 storage type.
3. Create a Pick HU using LH01 and assign the HU on the pallet to the transfer order.
4. Confirm the transfer order using LT12.
5. Perform PGI for the delivery.
6. Use HUMO to display the HU and then you can transfer the stock back to WM/HU location using the storage location transfer option available on the HUMO screen(EDIT à change HU posting à Storage location)
7. Perform Bin to bin transfer to move the SU from 921 storage type to putaway the HU/SU back to the destined Storage type/Bin.
Best Regards,
Harish -
Error Addition to stock of material A in storage type 002 is not allowed
Dear all,
I am doing GR for PO in WM. During TO creation I am getting this error Addition to stock of material A in storage type 002 is not allowed. Hence no storage bins can be entered. May I know under what scenarios this type error props up?
Thanks in advance,
PrashanthPlease find the explanation in SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
SPRO > LE > WM > Master Data > Define Storage Type
Check
- putaway strategy --> V_T3010-STEIN
- addition to existing stock indicastor ---> V_T3010-ZULAG
As you can read in the help, other factoers such as capacity may influence this.
Regards,
Csaba
Edited by: Csaba Szommer on Feb 19, 2010 7:55 AM
Maybe you are looking for
-
How to read name of the file in bpel
Hi Guys, I want to read the file names in particular folder using bpel process. Please any one can give solution. regards janardhan
-
Where is the formatting information in JTextPane or RTFEditorKit?
I'm trying to figure out how to find the formatting information in either JTextPane or RTFEditorKit. Specifically, I need to get a list of all formatting tags in a document, and where they are mapped into that document. Aaron
-
'Unable to download application' message on iPhone 4
I have an iPhone 4, 16 GB running iOS 5.0.1, so I was trying to update my applications and I keep on getting this message 'Unable to download application', '<application> could not be installed this time. I also tried updating using the computer but
-
This computer's local hostname is already in use on this network
has anyone else experienced this issue? The iMac will display the following error message on the screen every day or so (with the host number incresing by 1 digit each time): This computer's local hostname "MacName.local" is already in use on this ne
-
SG500X 10GE uplink configure switch port access
Hi, Can I configure the 10GE uplink interface of the SG500X as switcport access? Partner is asking if a server with 10GE interface can be connected to the 10GE uplink of the SG500X. Mark J.