Change Tax Type and Tax Code withheld amount

Hello,
I need to change a certain Withholding Tax Type and Tax Code amount to be withheld starting Feb 2007. What is the path in order to change the amount please?
Thank you,
Roger

Hi Roger
Please see below if you are looking for path to change the min amount
Financial accounting
Financial accounting global settings
Withholding tax
Extended withholding tax
Calculation
Minimum and maximum amounts
Define min/max amount for withholidng tax types
thanks - Ashok - Assign points for useful answers

Similar Messages

RFWT0010 withholding tax type and tax code change in vendor master problem

Hi
Due to some reasons I need to change the withholding tax type and tax code in vendor master.
When i am running the report RFWT010,After changing the tax type and tax code in vendor master...the list contains no items. eventhough there are 14 line items for the vendor that are required to be adjusted with new tax type.
Please suggest how to solve this query.
regards
yesap.fico

Any inputs?

How many new tax type and tax code are created for change in TDS

Hello Gurus.
we are using SAP since more than one year.
now tDS rate is change , so i would like to know How many new tax type and Tax Code is created in our system
and also like to know At what percentage i will crete that new tax code.
we have pair of tax type and tax code as shown in Example( for Interest) below
Tax type        Tax code           Name
I1      IC      Sec 194A - Interest on deposits
I1      IO      Sec 194A - Interest on deposits OT
I2      IC      Sec 194A - Interest on deposits Surcharg
I3      IC      Sec 194A - Interest on deposits EC& SHEe
I3      IO      Sec 194A - Interest on deps EC& SHEe OT
I4      IC      Sec 194A - Interest on deposits Pymt
I4      IO      Sec 194A - Interest on deposits Pymt OT
I5      IC      Sec 194A - Interest on dep Pymt Surcharg
I6      IC      Sec 194A - Interest on dep Pymt EC& SHEe
so how namy additional reuire to create new tax type and code more.
i am waiting your reply.
Regard,
Riten patel
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:33 AM

Hello Hansachechani
we have followinng   tax key
115O     Dividend 115O(1)
192B     Salary
194A     Interest income other than securities
194C     Payment to contractors
194H     Commission
194I     Rent
194J     Prof/Technical services
195     Payment to foreign nationals
206C     Tax Collected at Sources (Scrap)
ST     Service Tax
and we have followig tax type
C4     Sec 194H Commission Payment
C5     Sec 194H Commission Pymt Surcharge
C6     Sec 194H Commission Pymt EC & SHE Cess
D4     Sec 115O(1) Dividend Payment
D5     Sec 115O(1) Dividend Pymt Surcharge
D6     Sec 115O(1) Dividend Pymt EC & SHE Cess
F4     Sec 195 Foreign Prof fees Payment
F5     Sec 195 Foreign Prof fees Pymt Surcharge
F6     Sec 195 Foreign Prof Fees Pymt E&HS Cess
G1     Service Tax on GTA
G2     Service Tax on GTA E Cess
G3     Service Tax on GTA S&HE Cess
I4     Sec 194A Int on Deposit Payment
I5     Sec 194A Int on Deposit Pymt Surcharge
I6     Sec 194A Int on Deposit Pymt EC & SHE Ce
L4     Sec 194C Contractors Payment
L5     Sec 194C Contractors Payment Surcharge
L6     Sec 194C Contractors Payment EC&S HE Ces
P4     Sec 194J Professional Payment
P5     Sec 194J Professional Pymt Surcharge
P6     Sec 194J Professional Pymt EC & SH E Ces
R4     Sec 194I Rent Payment
R5     Sec 194I Rent Payment Surcharge
R6     Sec 194I Rent Payment E Cess & SH E Cess
So Is it necessary to create new tax key and tax type?
wheather i create new tax code only?
I ma waiting your reply.
Regard,
Riten patel

Extended WHT tax type and tax code

Hi,
In extended WHT, why can have the same tax type with several tax code? I know that they are having different tax deducted percentage but I still do not sure why need to have tax code assigned to tax type.
Can anyone give advice?
thanks alot

hi,
i know that tax type are for either at the time of invoice or payment but you still not gave advice of why need to have tax code.
i know tax code is to use to determine percentage but what is the relationship between them.
thanks

Employee tax types and tax rates

Hi gurus,
I have a requirement in that i need to get the employee tax rates. Is tax rates are maintained in SAP or BSI. If tax rates are maintained in sap what are the tax rate tables. If they are maintained in BSI, is their any FM'S to get the those tax rates.
thanks
venkata

Hi,
If I understand your question correctly, you want to find out Employee tax rates. Check the following points.
1. If you see the RT table employee tax related wage types are typically denoted by EE prefix and employer tax related ones are denoted by ER prefix.
2. I believe you were able to run the simulation. Please try and open the schema log. Search for function "USTAX" in calculate taxes section. if further open each node therein you would find BSI taxes section in which you may be able to separate the EE and ER taxes.
3. In tax type description as well, in table T5UTT, you should see the text Employer or Employee to distinguish the taxes.
let me know if this helped. Or you can post to me few more details like may be RT table details so that I can help you with specific example.
Vandana

Withholding Tax Types and Withholding Tax Code

Good Afternoon SAP Guru's
I need some help with a very basic question. I need to configure WHT and EWHT for 1099 and 1042. I am in the US. Here is the configuration I completed so far which I hope is appropriate. Please tell me if it not.
SPRO for EWHT
Maintain Country
Define Reason for Exemption
*is this needed for 1099 not withholding?
Maintain Recipient Type
Define WHT keys
Check Recipient Types
*1042 only?
WHT type for invoice posting
*created I1 for WHT type for Invoice Posting
WHT type for payment posting
*created 42 for 1042
*created ST for 1099 State
*created FE for 1099 Federal
Define Rounding Rule for WHT
*is this necessary
Assign Condition Type to WHT type
*what is this for?
My big issue is that I am confused on Tax Type and Tax Code.
I believe it is required to have 3 tax types for invoice posting and 3 for payment posting? I have 3 scenarios each. They are as mentioned earlier
1099- not withholding
1099- withholding
1042- withholding
I haven't configured 3 tax types for invoice posting, only 1 at this time.
For tax code, I struggle with the tax code field because the field is only 2 positions and therefore, how do I differentiate the different codes listed on the 1099 and 1042 on here? There are 18 codes on a 1099 and 50 on a 1042. Any suggestions?
Do I need to enter 1099 codes twice because one is exempt and the other is withholding? Or is that the reason why I need to create a exemption reason code for WHT type?
Any help would be greatly appreciated.
Thanks!

no response

IN VENDER MASTER WHICH WHT TAX TYPE AND TAXCODE I WLL ASSIGN

Please tell me which tax type and tax code i will assign, ie; invoice or payment wht tax type.
Regards,
Amit

Hi Amit,
Assign the tax type and the tax code to the vendor master for the Invoice category.
For the Payment category, assign only the tax type and not the tax code.
In this case the user have to manually put the tax codes at the time of advance payment.
Regards
SAP CA

Assign Withholding Tax Types to Company Code

In SPRO in the menu item "Assign Withholding Tax Types to Company Code" (program SAPL0F61), I enter to try and setup the Types for my new Company code.
When I go into New Entries, On the top drop-down I enter my new Company Code, then in the
"Wthhld tax type" field, I click on the look-up and don't see the Withholding tax types that I setup for country Italy. The only ones that are showing up are for a previous country setup Mexico.
I setup Italy as a Withholding Tax Country, and I setup the Withholding Tax types already.
Does anybody know how to get the Withholding Tax Types to show up for Italy and not just Mexico?
thanks

This is an ABAP Development forum, you might want to post your question in the SD or FI forum instead.

Tax model, Tax combinations and Tax types for New Jersey

We are having problems in computing taxes correctly for Employees who have their Work tax area and Residence tax area as New Jersey.
Can anyone please help with the best Tax model, tax combination and Tax types for these combination for New Jersey.
It will be better if you have employees in New Jersey, who have their Taxes deducted correctly.
We are in an implementation and unfortunately it has been a while since we have applied any Tax related SAP notes or BSI tubs.
Appreciate all help.

i have been researching and have found that NJ state taxes are like Puerto Rico taxes. The Schema UMOT may have to be used with a different modifier to calculate Withhoding tax for NJ , different from FED.
Has anyone of you used this schema ? I find that UTAXRAUTHY ( tax authority) is an Operation in the deecisison tree .Can anyone confirm if Tax type is also an operation?
I shall appreciate any related feedback.Thanks.

What Message type and Process Code to use for Purchase Order Change in 4.6C

I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
I can not imagine this functionality does not exist in 4.6C.
Any suggestions for my problem are welcome.

Hello,
In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
Function module    BAPI_IDOC_INPUT1
Idoc Type              PORDCH01
Message Type      PORDCH
So check carefully the following OSS notes:
[Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
[ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
Regards,
Andrea
Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

TAXCLASSIFICATIONS - tax type and class

Hi,
I cannot transfer tax data during creating new material. I know that either tax type or tax classification is responsible for error. I know that some dependences exist but cannot find what exactly. What should I pass to TAX_TYPE_1 and TAXCLASS_1?
Any help will be appreciated and properly rewarded.
Br,
Rafal

solved

Tax Report and Tax Reconcilation Report

Can anyone tell me what is the difference between Tax Report and Tax Reconcilation Report?
What is Tax Reconcilation Report supposed to do?

From the Help Files this is what I have
Tax Report
In this report, you can display documents and manual journal entries that include tax amounts, sorted by tax code.
The tax report includes the following documents:
A/R and A/P invoices and credit memos
Stock transfer documents The stock transfer transactions are displayed only in order to report the transactions in the report due to the fact that the tax percentage is 0.
Manual journal entries
Incoming payments and payments to vendors that are not based on invoices
Incoming payments and payment to vendors that include cash discounts
Tax Reconciliation Report
This report enables you to track the taxes amounts that were posted in sales and purchasing documents and in manual transactions.
The report displays the G/L accounts involved in these transactions and calculates the tax amounts that should have been paid, based on the tax codes defined for each transaction.
The report covers the following transactions:
A/P and A/R invoices
A/P and A/R credit memos
Manual journal entries
A/P and A/R down payment invoices
Incoming and outgoing payments

How to change material type and industrial sector of the exsisting material

Hi,
There is an issue where user wants to change material type and industrial sector of the exsisting material .Is it posible to do so??
IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector can be created.
Points will be definitely rewarded.
Thanks
Rohit

Hi Rohit,
You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
Remember the new material type should have same attributes same as old material type.
OLD Material New Material
1) Standard Price 1) Standard Price
2) Manufacture part 2) Manufacture part
profile actvated profile actvated
3) Quantity & Value 3) Quantity & Value
Updation in all areas Updation in all areas
4) should have same GL 4) Should have same GL acs
acs
It is not possible to change Industry sector once created.
If you want to delete the Material, you can flag it in MM06 trxn code.
Reg,
Ashok
Dont forget to Assign points if useful.

Change material type and valuation class

hi
my client want to change material type and valuation class in their production system. but the material no. and some transaction had done by this material. anything i need to concern? especially, in FI part. thank

Hey Changing of Material Type is one step
Changing of valuation class is other
and underneth that changing of account is another attached to the valuation class.
The basic requiremnt will be that client want to change the G/L code attached to the valuation class.
If you have already done some transaction it is not fininacialy right to move valuation classes.
Tell in detail what is the requiremnt.

Dreamweaver setting wrong file type and creator codes

First of all, I'm running Mac OS X 10.5.2 on an Intel-based
Mac, with Dreamweaver CS3 9.0 build 3481.
I have a site defined where I connect to my web server via
FTP. On my server, I just upgraded my forum software to PHPBB 3.0,
which created a new /forums/ directory. My plan is to use
Dreamweaver to download that new /forums/ directory to my local
site where I can edit the files. Inside the forums folder are
several types of files, like ".php" files, ".htm" files, ".gif"
files, etc.
So, upon downloading the /forums/ folder to my local machine
by dragging and dropping it (in Dreamweaver) from the remote site
to the local site, I noticed that Dreamweaver insists on setting
HFS file type and creator codes for files it recognizes, based on
the filename extension.
I've connected to the same server using the Finder and
Transmit, and copied the remote /forums/ folder over to my local
machine. Neither of those copies have files with file types and
creator codes set, meaning they aren't actually set on the remote
files and that this is indeed something Dreamweaver is doing on the
fly as it downloads the files.
I'm wondering if there's any way possible to disable this
behavior, and just download the files like they are on the server?
(File extension only). To make matters worse, on my Intel-based
Mac, it's not even setting the proper codes, as you can see in the
following image:
http://homepage.mac.com/mdouma46/images/dreamweaver.png
Notice for the ".php" document, it's attempting to set a file
type of 'TEXT' and a creator code of 'DmWr' (DreamWeaver's creator
code), but because the Dreamweaver developers didn't bother to take
into account the byte-ordering differences between PowerPC Macs and
Intel Macs, the codes are written in reverse: 'TEXT' becomes
'TXET', and 'DmWr' becomes 'rWmD'. (If you're going to use
low-level routines such as FSSetCatalogInfo() to set the file types
and creator codes, you need to call CFSwapInt32HostToBig() on the
OSType values before doing so, to make sure they're in Big-endian
format).
Anyone know where the conversion information is stored?
Thanks in advance.....

Creator codes are totally deprecated in snow leopard. as for a workaround you can use something like this.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on open these_items
repeat with this_item in these_items
tell application "Finder"
set the_file to POSIX path of (this_item as alias)
tell application "System Events"
set default application of file (the_file) to ("Main HD:Applications:Preview.app" as alias)
end tell
end tell
end repeat
end open</pre>
save it as an application and drop files onto it to set them to open with Preview.

Change Tax Type and Tax Code withheld amount

Similar Messages

Maybe you are looking for