Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

Similar Messages

Some difficulties using the domain XBLNR_ALT or data element XBLNR_ALT....

Hi all,
We try to understand what is wrong with ODN in our FI domain.
When we want to consult the table BKPF using filter on field XBLNR_ALT it doesn't seem to work with single value but using range we found the corresponding data if we change the ODN 5700000099 to 5700000099000000.
Using transaction FB03 we have the correct value (5700000099).
I saw an OSS Note 746162 but this not for our SAP version (we have SAP_APPL 600). The index on table BKPF is not present in our system. Do you think that this could create our problem?
Quite strange....
Thanks!
David

Hugo Hinojos
can you let me know how did you resolved this issue. we are also facing the same issue now.
thanks,
suneel

Changing field lable of KVGR1 data element.

Hi Guys,
I am changing field lable of KVGR1 data element. No. of depedent objects are also changed but some of the objects were end up with warning "Enahancement category for table missing". Since all this objects SAP Standard do I have to genarate key for every single one with warning to adjust the enhancement type.
Cheers
S Kumar

Hi Amit,
I have already changed the Field labels and Description of KVGR1 data element using SSCR key.
Is it a good idea to revert it back. The dependent tables and structures are activated with warnings. Which is Enhancement category.
Cheers
S Kumar

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

How to get the name of a Data Element of a generic Table!

Hi guys!
In my function i have the following import paramenter
i_outtab type standard table
now i import a table and i want to get the dataelement of the fields.
is there a way to do this??

Hello Thomas
Perhaps the following sample report may be useful for you.
*& Report ZUS_SDN_RTTI_STRUCT_COMPONENTS
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145711"></a>
*& Thread: How to get the name of a Data Element of a generic Table!
REPORT zus_sdn_rtti_struct_components.
TYPE-POOLS: abap.
TYPES: BEGIN OF ty_s_outtab.
TYPES: bukrs    TYPE bukrs.
TYPES: kunnr    TYPE kunnr.
TYPES: END OF ty_s_outtab.
DATA: gdo_data    TYPE REF TO data.
DATA: gs_outtab   TYPE ty_s_outtab.
DATA: go_typedescr TYPE REF TO cl_abap_typedescr,
      go_structdescr TYPE REF TO cl_abap_structdescr,
      go_datadescr    type ref to cl_abap_datadescr.
DATA: gs_comp        TYPE abap_compdescr,
      gd_dtel        type string,
      gt_dfies        type ddfields.
FIELD-SYMBOLS:
<gs_struct> TYPE ANY.
START-OF-SELECTION.
BREAK-POINT.
GET REFERENCE OF gs_outtab INTO gdo_data.
ASSIGN gdo_data->* TO <gs_struct>.
go_typedescr = cl_abap_typedescr=>describe_by_data( <gs_struct> ).
go_structdescr ?= go_typedescr.
BREAK-POINT.
LOOP AT go_structdescr->components INTO gs_comp.
    go_datadescr = GO_STRUCTDESCR->GET_COMPONENT_TYPE( gs_comp-name ).
    gd_dtel = go_datadescr->get_relative_name( ).
    write: / syst-tabix, 'Data element =', gd_dtel.
ENDLOOP.
END-OF-SELECTION.
Regards
Uwe

How to display data elements in the tempalte header

Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AM

Hi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply

Get the month from a date column with the calculated column

I am trying to get the month from a date field with the help of calculated column. However I get this syntax error whenever I want to submit the formula:
Error
The formula contains a syntax error or is not supported.
the default language of our site is German and [datum, von] is a date field.

Hi,
I have created two columns
Current MM-YY
Calculated (calculation based on other columns)
Today
Date and Time
Current MM-YY is calculated value with formula as
=TEXT(Today,"mmmm")
But the output shows as December instead of May.
I have tried =TEXT([Datum, von];"mmmm") but no help.
I am trying to populated the column automatically with current month..ex: if its May the field should show May, next month it should show June an so on.
Any kind help is grateful.
Regards,
Pradeep

Following the recent upgrade to Photoshop Elements 13 the shadows/highlights sliders no longer operate. How do I resolve this issue?

Having installed the recent upgrade to Photoshop Elements 13 the shadows/highlights sliders no longer work. How do I resolve this problem?

Sometimes when problems pop up for no apparent reason it could be that the preferences files had become corrupted. Here are two ways to reset the preferences.
1. The reset process might be built into your PSE version, as shown in this video:
How to Reset Photoshop Elements Preferences - YouTube
2. If your version does not have the reset option, press and hold Alt-Ctrl-Shift (Option-Command-Shift on Mac) immediately while starting PSE. The timing is critical; you may have to try this several times. A dialog box will pop asking if you want to delete the settings file? Click YES.
Let us know if either of these works for you.

Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.

consider this situation,
Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.
my tables are from northwind:
[orders] = OrderID, CustomerID, EmployeeID, OrderDate, RequiredDate, ShippedDate, ShipVia, Freight, ShipName, ShipAddress, ShipCity, ShipRegion, ShipPostalCode, ShipCountry.
[orders details] = OrderID, ProductID, UnitPrice, Quantity, Discount.
i tried some but it is not exact, it gives wrong result.
select pd.CustomerID,pd.ProductID, pd.no_of_time_purchased, sd.ShipVia, sd.same_ship_count, shipped_day from
select ProductID,o.CustomerID,COUNT(productid) as no_of_time_purchased
from orders o join [Order Details] od on o.OrderID=od.OrderID group by ProductID,o.CustomerID
having count(od.ProductID) >1) pd
join
(select OrderID,customerid, shipvia, count(shipvia)as same_ship_count, DATENAME(DW,ShippedDate)as shipped_day from orders
group by customerid, ShipVia, ShippedDate having COUNT(ShipVia) > 1 ) sd
on sd.CustomerID=pd.CustomerID

Hi,
I think I have a solution that will at least give you a clue how to go about it. I have simplified the tables you mentioned and created them as temporary tables on my side, with some fake data to test with. I have incldued the generation of these temporary
tables for your review.
In my example I have included:
1. A customer which has purchased the same product on the same day, using the same ship 3 times,
2. Another example the same as the first but the third purchase was on a different day
3. Another example the same as the first but the third purchase was a different product
4. Another example the same as the first but the third purchase was using a different "ShipVia".
You should be able to see that by grouping on all of the columns that you wich to return, you should not need to perform any subselects.
Please let me know if I have missed any requirements.
Hope this helps:
CREATE TABLE #ORDERS
OrderID INT,
CustomerID INT,
OrderDate DATETIME,
ShipVia VARCHAR(5)
CREATE TABLE #ORDERS_DETAILS
OrderID INT,
ProductID INT,
INSERT INTO #ORDERS
VALUES
(1, 1, GETDATE(), 'ABC'),
(2, 1, GETDATE(), 'ABC'),
(3, 1, GETDATE(), 'ABC'),
(4, 2, GETDATE() - 4, 'DEF'),
(5, 2, GETDATE() - 4, 'DEF'),
(6, 2, GETDATE() - 5, 'DEF'),
(7, 3, GETDATE() - 10, 'GHI'),
(8, 3, GETDATE() - 10, 'GHI'),
(9, 3, GETDATE() - 10, 'GHI'),
(10, 4, GETDATE() - 10, 'JKL'),
(11, 4, GETDATE() - 10, 'JKL'),
(12, 4, GETDATE() - 10, 'MNO')
INSERT INTO #ORDERS_DETAILS
VALUES
(1, 1),
(2, 1),
(3, 1),
(4, 2),
(5, 2),
(6, 2),
(7, 3),
(8, 3),
(9, 4),
(10, 5),
(11, 5),
(12, 5)
SELECT * FROM #ORDERS
SELECT * FROM #ORDERS_DETAILS
SELECT
O.CustomerID,
OD.ProductID,
O.ShipVia,
COUNT(O.ShipVia),
DATENAME(DW, O.OrderDate) AS [Shipped Day]
FROM #ORDERS O
JOIN #ORDERS_DETAILS OD ON O.orderID = OD.OrderID
GROUP BY OD.ProductID, O.CustomerID, O.ShipVia, DATENAME(DW, O.OrderDate) HAVING COUNT(OD.ProductID) > 1
DROP TABLE #ORDERS
DROP TABLE #ORDERS_DETAILS

I downloaded the new upgrade for Premier Elements 13 the other day, and now my program will hardly operate and will not do basic functions. What can I do?

I downloaded the new upgrade for Premier Elements 13 the other day, and every since then my program will hardly operate and cannot do most functions. What can I do?

Bill
I went to the Premiere Elements 13 tryout page at the Adobe web site and downloaded the tryout. I used the Firefox browser (latest version).
These are the details according to what was presented to me today
1. In choice of download, I selected Multiple LanguagesIWindows 64 bitI 1.67 GB. I do not have a Windows 7 or 8 32 bit computer.
In your case, you would expect that you used used Multiple LanguagesIWindows 1.50 GB (which would have been the 32 bit version
in agreement with your Windows 7 or 8 32 bit computer.
2. When I pressed the Download button, there appeared
Akamai Download Manager
Browse For Folder dialog - (where I designated Desktop as my save location for the saved file/folders from the download)
3. The first file to download was the .7z which is named Premiereelements 13_LS26_win64.7z (in my case, in yours it should be ...._win32.7x)
File 1 of 2.
The second file to download was the .exe which is named PremiereElements 13_LS26_win64.exe (in my case, in yours it should be..._win32.exe)
4. When "3" is finished, automatically the Install Now comes up with a dialog regarding the .exe with an Open button. Click on the Open button.
5. Next there is a Folder Location dialog which I had set
C:\Uses\Owner\Desktop\Adobe Premiere Elements 13
I clicked next in this Folder Location dialog.
6. Next there was an Adobe Premiee Elements 13 dialog "Preparing Files" with mention of "Extracting Files".
When the extraction process was complete, there was the automatic appearance of the Files Are Ready with a check mark next to
"Launch Adobe Premiere Elements 13. There I clicked the Finished button.
7. Next up was the Adobe Installer dialog and the "Initializing Installer" message.
8. Next came the Welcome dialog with choices of Install or Try. I selected Try.
If you have a purchased serial number already, I assume that you can click install and use your purchased serial number.
9. Next came the sign In Required dialog where I click the Sign In button.
10. Next the Adobe Software License Agreement to which I clicked Accept.
11. Next the Options dialog -
Adobe Premiere Elements 13 4.1 GB
Language English (North America)
Location C:\Program Files\Adobe
to all of 11 I clicked Install.
and said Yes to User Account Control pop up.
12. Automatic Install from there on.
When I looked at my desktop I found saved there
a. the .exe file
b. the .7x file
c. an Adobe Premiere Elements 13 Folder
any of which I believe I could have installed from as I have described to you previously.
If you cannot get the above to work, then you can try going through the process of getting the Adobe Premiere Elements 13 tryout
from
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
There you will end up with the .exe and .7z downloads. After you download and save these two to your desktop, then you begin the
process by double clicking the exe and following the on screen instructions.
Please review the above and determine how much of it you have been through before and the choices that you have made along the way.
ATR

Approach when the used Live cache data area crosses the threshold

Hi,
Could any of you please let me know the detailed approach when the used Live cache data area crosses the threshold in APO system?
The approach I have as of now is :
1) When it is identified that data cache usage is nearly 100%, check for hit rate for OMS data in data cache in LC10 .Because generally hit rate for OMS data in data cache should be atleaset 99.8% and Data Cache usage should be well below 100%.
2) To monitor unsuccessful accesses to data cache choose refresh and compare value now and before unsuccessful accesses result in physical disk I/O and should generally be avoided.
3) The number of OMS data pages (OMS Data) should be much higher than the number of OMS history pages (History/Undo).A ratio of 4:1 is desirable. If OMS history has nearly the same size as OMS data, use Problem AnalysisPerformanceOMS versions to find out if named consistent views (Versions) are open for a long time. Maximum age should be 8hrs.
4)If consumption of OMS heap and data cache is large, one reason may be a long running transaction simulation that accumulates heap memory and prevents the garbage collector from releasing old object images.
5) To display existing transactional simulations in LC10,use Problem AnalysisPerformanceOMS versions and SM04 to find out user of corresponding transaction and may be required to cancel the session after contacting user if the version open for long time..
Please help me by providing additional information on the issue.
Thanks,
Varada Reddy.

Hi Mayank, sorry, one basic question - are you using some selection criteria during extraction? If yes, then try extraction without the selection criteria.
If you maintain selection based on, let's say, material, you need to use the right number of zeros as prefix (based on how you have defined the characteristic for material) otherwise no records would be selected.
Is this relevant in your case?
One more option is to try to repair teh datasource. In the planning area, go to extraction tools, select the datasource, and then choose the option of repair datasource.
If you need more info, pls let me know.
- Pawan

Detailed approach when the used Live cache data area crosses the threshold

Hi,
Could any of you please let me know the detailed approach when the used Live cache data area crosses the threshold in APO system?
The approach I have as of now is :
1) When it is identified that data cache usage is nearly 100%, check for hit rate for OMS data in data cache in LC10 .Because generally hit rate for OMS data in data cache should be atleaset 99.8% and Data Cache usage should be well below 100%.
2) To monitor unsuccessful accesses to data cache choose refresh and compare value now and before unsuccessful accesses result in physical disk I/O and should generally be avoided.
3) The number of OMS data pages (OMS Data) should be much higher than the number of OMS history pages (History/Undo).A ratio of 4:1 is desirable. If OMS history has nearly the same size as OMS data, use Problem AnalysisPerformanceOMS versions to find out if named consistent views (Versions) are open for a long time. Maximum age should be 8hrs.
4)If consumption of OMS heap and data cache is large, one reason may be a long running transaction simulation that accumulates heap memory and prevents the garbage collector from releasing old object images.
5) To display existing transactional simulations in LC10,use Problem AnalysisPerformanceOMS versions and SM04 to find out user of corresponding transaction and may be required to cancel the session after contacting user if the version open for long time..
Please help me by providing additional information on the issue.
Thanks,
Varada Reddy.

Hi Mayank, sorry, one basic question - are you using some selection criteria during extraction? If yes, then try extraction without the selection criteria.
If you maintain selection based on, let's say, material, you need to use the right number of zeros as prefix (based on how you have defined the characteristic for material) otherwise no records would be selected.
Is this relevant in your case?
One more option is to try to repair teh datasource. In the planning area, go to extraction tools, select the datasource, and then choose the option of repair datasource.
If you need more info, pls let me know.
- Pawan

How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc.

How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc. I bought a new iphone 5 on ebay.com - he was used. For a decision on my case ebay asks for this information ...

Apple will never reveal that info to you, since you were not the originally purchaser. However, you can get the date of sale by entering the SN here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Warranty starts on the date of sale, which is most likely the date of activation, but not necessarily so.

How to use '*' as data Element in the NTE(Edi 850) Segment

Hi All,
I am facing a field level error while using '*' in EDI 850 (NTE segment). '*' is also used as Data Element.
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
I have asked this question before
http://social.msdn.microsoft.com/Forums/en-US/1668e8d8-ee99-4d79-961b-8d26f3a496f8/error-while-using-in-the-nte-edi-850-segment-where-is-also-used-as-data-element?forum=biztalkediandas2
The answer in the above forum was to ask client modify the EDI message.
Previously, our client was using a different technology (other than BizTalk) which was working fine with this format. So, they are insisting on this format only.
Thanks,

Sorry, the answer is the same.
It doesn't matter what EDI platform either side is using, the '*' in the field content conflicts with the '*' that is the element delimiter. That is invalid EDI, there is no way around that short of writing a custom EDI parser.
It's not clear if you're sending or receiving this message. But again, it's really doesn't matter.
1. Change the Element Delimiter to something other than '*'. < or > are not uncommon.
2. If you are receiving the EDI, create a custom Pipeline Component that "handles" NTE02 either by replacing the '*' with a substitute char or deleting it.
3. If you are receiving, you could add extra elements to NTE to accommodate extra fields (since that's how the parser will see them). Then you can join them again in a Map.

Activate Change Document Check box in Data Element "J_CHGKZ"

Hi experts,
Our developer want to activate the change document for the data element "J_CHGKZ". The access key has been applied. We have tried to activate the change document check box in SE11, but the change box is disabled even in change mode. Has anyone come across this before and does anyone have a solution to this?
Thanks

Hi,
SAP does not allow to use change management for date, time fields. Thats the reason for not allowing change to BDTER field.
Hope that answers your question.
Thanks
Pavan

Change the Domain of a data elements in the extraction structure

Similar Messages

Maybe you are looking for