Change the 'No data found.' message in a report region

I've got a report region (PL/SQL source) which sometimes returns no data, giving a 'No Data Found.' message.
I couild have sworn there was an option to choose a custom message in the region definition when no data is returned - but I can't see that option. I guess it must have been in another region type.
Is there some other way of setting the No Data Returned message?

Hi,
Check out this post:
Hide the 'no data found' message
I hope that helps.
-Marc

Similar Messages

In how to customize std no data found message in Bex Report...

Hi
I am running my WAD report in Portal and report had no data so giving std message "Could not find any data to display. This might be due to the current selection of variable or filter values"
I wanted to change this std message to "No Data Found".
Could u pls. let me know where & how can i do that?
Thanks...

Hello,
Well, you can create a javascript... When the string appears, delete and insert another one.
Maybe there are other ways, like this one:
> http://help.sap.com/saphelp_nw70/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
Thanks
Edward John

"no data found" message wrapping in interactive report

I've looked around and can't figure out what's going on. Any help would be greatly appreciated.
I have an interactive report which, when no data is found, displays the "no data found" message wrapping very tight. I have uploaded a screenshot of it to TinyPic for you to see what I see.
The HTML generated around the "no data found" text is the following.
>
<DIV id="apexir_DATA_PANEL">
<TABLE summary="">
<TBODY>
<TR>
<TD>
<TABLE id="12352007490697832" class="apexir_WORKSHEET_DATA" border="0" cellSpacing="0" summary="" cellPadding="0">
<SPAN class="fielddata">
No submissions were found in the system.
</SPAN>
</TABLE>
</TD>
</TR>
</TD>
</TR>
</TBODY>
</TABLE>
</DIV>
>
I've looked through the HTML code that is generated for that page, but can't figure out why the words are wrapping. Any thoughts?
Shane.

Well, my problem is back again. It is only doing this in IE 8, not FF. When I run IE 8 in "IE 7" mode, the error message shows up fine, all on one line. I actually have two span tags now so I can have some spacing around the "no data found" message. I cannot get the "span" tags to show up in the HTML code. The software for this discussion forum seems to be filtering it out or the web browser is interpreting it when it should not. I will replace the SPAN tags with square brackets so you can see them. I also had to change "style" to "st_yle" so the software did not filter it out. It sure looks like a jumbled mess now.
>
<DIV id="apexir_DATA_PANEL">
<TABLE summary="">
<TBODY>
<TR>
<TD>
<TABLE id="12352007490697832" class="apexir_WORKSHEET_DATA" border="0" cellSpacing="0" summary="" cellPadding="0">
[SPAN class="fielddata"][span st_yle="padding: 15px;"]No submissions were found in the system.[span][SPAN]
</TABLE>
</TD>
</TR>
</TD>
</TR>
</TBODY>
</TABLE>
</DIV>
>
Since I am using an interactive report, I do not believe I have any report template I can alter to adjust how the report and/or "no data found" message are being drawn up. I do have the region of the interactive report set to "Reports Region 100% Width", but the HTML in question is not being generated by that template.
I wonder if the problem is specific to how IE 8 might be interpreting the inside TABLE tags when it does not have any TR or TD tags within it. Any further thoughts on the matter?
Shane.

Help need in Stacked bar vertical - No data found message

I am using Stacked bar vertical with the 3 series. The problem is if any one of the series returns zero rows for the query it displays the No data found message for all the series and blank graph is there on screen with just x and y axi with the name.
The result i want is if any series in the graph returns zero row for the query it should executed the other series and show the graph accordingly for the series fetch the data.
all these queries are returning the data when run on database instead of one.
Can anyone help me for this?

Hello Sunil,
you may find some info here:
Document on Multiple Series SVG Line Chart
Generally speaking, if you want your queries to return "dense" data, you must ensure that a zero (Y value) is returned against each X value. If your queries return no rows, it means you must "artificially" create values, probably rewriting the queries with an outer join to a table returning the desired X values and using NVL function to replace null (Y) values with zeros.
Also, be careful with the order of X values, it really matters, otherwise you'll get skewed charts!
Bye,
Flavio

Change the initial focus to "message" in JOptionPane.showOptionDialog?

JPanel panel = new JPanel (false);
JTextArea txtArea = new JTextArea (msg, 2, 60);
JScrollPane sPane = new JScrollPane (txtArea);
panel.add (sPane);
int button = JOptionPane.showOptionDialog (frame, panel, titleStr, optionType, JOptionPane.PLAIN_MESSAGE, null, null, null);
Is there a way to make txtArea to have the initial focus?
Thanks,
Ben

Hi,
Check out this post:
Hide the 'no data found' message
I hope that helps.
-Marc

Chart - Reposition No Data Found Message

Hi All
I would like to know how to reposition the No Data Found message displayed in SVG Charts. It currently clashes with the Title / Legend.
I have tried adding <br> which just makes it the message dissappear completely. &nbsp doesnt work either.
All help appreciated.
thanx
Asif

The above post includes a br tag which has been interepreted as a newline Doh!!
It should read
Hi All
I would like to know how to reposition the No Data Found message displayed in SVG Charts. It currently clashes with the Title / Legend. I have tried adding a br tag which just makes it the message dissappear completely. &nbsp doesnt work either. All help appreciated. thanx Asif

Error message while changing the delimit date of a job in ppome

Hi experts,
I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2008 and 11.05.2011'. Can anyone say why it is showing this message. how can i delimit that job again to 31.12.2999.? Same problem with the position also.
Pls help...

Dear Priaynka,
Thanx for ur reply, I am again furnishing below the details:-
I have to change the Valuation Class of the material :-
7 POS for which Goods Receipt & Invoice Receipt have been done from period 1 to 7.
1 PO for which Goods Receipt & Invoice Receipt have not been made.
All the material reced in period 1-7 have been consumed by MFBF. Now no material is available in the material in that plant.
Should I change the valuation class by deleting the line item of all the PO's 7 POs + 1 PO.
Please advise, as the fresh PO will be made with new val class and GR/IR and Consyumption will happen after the change is made.
Please advise if I am wrong in the procedure.
Regards,
Alok

Which is the message name of "No Data found" message in Pagination IR ?

Hello,
in IR, in Pagination there exist 2 messages:
1. When more than maximum row data found message : APEXIR_MAX_ROW_COUNT and
2. When No Data Found Message: ???
Which is the name of the 2nd Symbolic Message ? I need it to set its translation globally. I checked User's guide but it was not included there.
After replacing APEXIR_MAX_ROW_COUNT with custom text i see that even this is not working also! Are there Text Messages defined for these two messages in Pagination in IR or not ?
TIA
Edited by: Dionyssis on 23 Οκτ 2009 2:41 πμ

Yes, i just tried it also. It does not work. The only action that works is by entering text in IR's Pagination text areas. This works, but i would like it to set global message for whole application, not to do it in every IR page of application.

Report template enhancement? no data found message

I have a layout in which I want to show the excel export link in the same html table as a logo, so that code needs to be placed in the report template, but when no data is found I still want to show the logo and so all my reports have the same html code in the "no data found" field. Whenever I want to change this I have to change my template as well as all of my reports.
Wouldn't it be a nice idea to provide for a "no data found" message in the report template instead of the report itself? I can imagine you would want to show the same "no data found" message anyway for all reports so the template would be a logical place to put this.

There are known issues with Interactive Reports referencing :REQUEST value, probably due to some inner logic that also handles it simultaneously - potentially causing malfunction or deadlocks.
One workaround I've learned is to create a computation to assign :REQUEST to a temporary item (a PXX_REQUEST, for instance) and reference it in the query, instead of :REQUEST. This has worked fine for me in my experience.
Let me know if that helps - pls sign the thread as 'Useful' or 'Correct' if so, hence more people can benefit.
tks,
Kleber

Replacing the "No Items Found" message with Javascript

On this page http://www.sedonamagoretreat.org/test in the second "Program Dates" box in the righthand sidebar, I'm attempting to implement a script I found to replace the "No items found" message with a custom html file.
The javascript is here: http://www.sedonamagoretreat.org/js/no-items-found.js and the html file used to replace the message is here: http://www.sedonamagoretreat.org/prog-dates-alternate-content.
I'm sure it's an easy fix and I'm just overlooking something...any suggestions to get this script working are welcome - thanks!
Linda

If it still doesn't work after you move the script then you might need to update your script to the following:
$(document).ready(function() {
     $.each($("."+webapp_wrapper_div), function() {
               if($("." + webapp_wrapper_div).html().indexOf("No items found.") != -1) {
                         $.get(alternate_page_html, function(data) {
                                   $("." + webapp_wrapper_div).append('<div id="ajax-temp" style="display: none;"></div>');
                                   $("#ajax-temp").html(data);
                                   $("." + webapp_wrapper_div).html($("#ajax-temp #" + alternate_page_div).html());
All I did was wrap the if statement in an $.each() function so that it does this to each instance of your web app item list.
Also, you should probably change your variable for "alternate_page_html" to "/prog-dates-alternate-content" so that this would work on pages that are in a folder in your site. Without the "/" this might only work on pages that are on the first-level of your site. If you tried this on a page at "/about/contact" then your get request without the "/" would be trying to get "/about/prog-dates-alternate-content" which doesn't exist.

Changing the APEX framework Error Message

I was wondering if anyone could help me out here. I am faced with a security issue where I need to hide any and all APEX framework error messages. Specifically, I need to hide the error messages on the screen you get when trying to access an application that doesnt exists (the whitescreen with the red "x"). This had been implemented already in the past, however, the 4.2 upgrade knocked it out. To change this in 4.1.1 is just a matter modifying the APEX_040100.WWV_FLOW_ERROR package.
Does anyone have any suggestions here? Any and all would be appreciated!
Thanks in advance,
Shawn

What is the specific security issue you are facing?
This sounds like a generic penetration test, perhaps something along the lines of "Error messages reveal the underlying technology" or "Error messages can contain information helpful to an attacker". This is because of the ORA- messages. I would push back on this and see if you can argue the point that;
a) The technology can not be hidden, we (for example) have written detection routines for nessus to detect APEX without relying on any error output.
b) Ask for a *specific* example where the framework error message has lessened the security posture of the application/framework.
c) If you cannot then you really do need help to ensure that any changes/patches to the framework do not decrease application stability. What is the risk to the business? Can the business accept this low risk?
d) Just because somebody saw an 'ORA-01403: no data found' message once doesn't instantly mean you are insecure.
Though saying that, it would be a good feature to suggest, certainly a 'turn all errors off' might easily combat these types of over-zealous security reports: https://apex.oracle.com/pls/apex/f?p=55447
regards,

Is there a way to change the Digitised Date for Mov files in Lightroom?

I am scanning some old photos. Unfortunately Programs such as Dropbox and OneDrive display Mov files by their digitised Date.
Consequently, My scanned photos are shown by the date that I scanned them. I can not seem to find anyway in LightRoom to change the Digitised Date so that they are shown on OneDrive/Dropbox in the correct order on my iPad.
Any help would be appreciated.

Your subject line says "Mov files" (which are video files), but your message talks about scanning old photos. I'll address the old photos issue.
Because there are so many dates/times associated with photos, and because every program feels free to use its own names, it's critical to be pedantically precise about terminology. The date/time a photo was originally taken (when the shutter was pressed) is called Date/Time Original or Capture Date. The date/time a photo was transferred to digital media is called Date/Time Digitized (when the analog file was scanned or when the digital-camera shutter was pressed).
A good rule of hygiene is to ensure every photo has a Date/Time Original (capture date). Typically only digital archivists care about maintaining Date/Time Digitized. If you ensure that every photo has a Date/Time Original, then pretty much any modern app and Web site will order your photos correctly.
In LR, you set Date/Time Original using the Metadata > Edit Capture Time command. By default, LR won't write the capture time back to the file's metadata, so depending on how you are transferring photos to other programs, the capture time won't necessarily get transferred. So you either need to do Metadata > Save Metadata To File, or better, set the option Catalog Settings > Metadata > Automatically Write Changes Into XMP.
Unfortunately, LR's Edit Capture Time isn't very flexible with dealing with scanned photos in which the precise date/time is not known. So some people like to set an entire batch to, say, 1963/10/01 00:00:00, while others like to have each photo set in increasing increments of 1 second, so that programs will at least maintain the known relative ordering (which comes from the film or slide ordering). To do that, you'll need a third-party plugin, e.g. ExifMeta or CaptureTime To EXIF.

Tax Code removed on changing the posting Date in Purchase Order

Dear All,
This is with reference to the Purchase Order Document tax part, the document has been defined with the approval procedure and document series followed as annual series. The document series is linked to the period indicator as I am using the monthly series for the A/R & A/P Invoice.
Now some Purchase Order was generated in the last month i.e. 30 NOV 07 which has gone for approval. These document are approved in the current month (Dec 07) & user are trying to add the records it displays the message as "Date deviates from permissible range [Purchase Order - Posting Date] [Message 173-11]" as the period indicator is changed to Dec 07 in document numbering.
The problem is when user changes the document date to Dec 07 for posting; system removes the tax codes, which is available in the document. Now as this is approved document user is not able to change or renter the tax codes.
In this situation what can be done as the same case will again happen for the next month.
Pls. provide the solution / work around for this problem.
Regards,
Yogesh Jadav

hi yogesh,
Cancel/Close the created purchase order.
First you should change docduedate in posting period upto december 2007/end of fiscal year,by following the below path.
(Administration->sytem intialization-> general settings--> posting period tab)
Create a new purchase order.
Send it for approval,authorizer can change date as required,
once the posting date changes,tax code get refreshed,authorizer
need to select tax code once again.
<b>Tax code normally get refreshed when you change posting date it's normal
system behaviour.</b>
After authorizer does above changes,he can approve purchase order.
Once purchase order is approved,orginator can add it as purchase order in draft stauts.
<b>After approval we can not do any changes in purchase order.</b>
Hope my solution will solve the problem.
Thanks,
With regards,
A.Jeyakanthan

Listview Report: how to hide "no data found" message

Good evening everybody,
I use the "jquery mobile theme 50" and the "listview report" of it. The report always shows "no data found"-entry if the source query doesn't return any row.
Is there a way to suppress this entry in Apex? I can hide "no data found"-entry in html using CSS, but I don't want to have it in the html at all.
Has someone an idea?
Thanks a lot!
Jewgenij

Thank you very much for the answer!
Unfortunately it works only for desktop themes but doesn't for jquery mobile Theme 50 :-)
The help text for the listview's (jquery mobile Theme 50) property "No Data Found Message" is
Defines the text message that displays when the query does not return any rows. If no value is specified the text of the system message APEX.REGION.NO_DATA_FOUND_MESSAGE is used.
BR
JeMo

SVG Pie chart : how to display no dat found message

Hello,
I have a SVG pie chart and written a message 'no data found' under charts attributes.
If there is no data for the chart,
In IE :the chart region will be blank . chart heading will be displayed and . no 'no data found ' message is displayed.
In mozilla : in the chart region, i can see ,the part of whole page where i display the chart ,is filled . Chart region heading is also displayed.
Could you please reply , how to display 'no data found ' in svg pie chart?
Thanks in advance.
Regards,
Archana

Hello,
I have a SVG pie chart and written a message 'no data found' under charts attributes.
If there is no data for the chart,
In IE :the chart region will be blank . chart heading will be displayed and . no 'no data found ' message is displayed.
In mozilla : in the chart region, i can see ,the part of whole page where i display the chart ,is filled . Chart region heading is also displayed.
Could you please reply , how to display 'no data found ' in svg pie chart?
Thanks in advance.
Regards,
Archana

Change the 'No data found.' message in a report region

Similar Messages

Maybe you are looking for