Change the printer name

How can I change the network printer names?

What model printer is it?
Generally speaking, Bonjour can't help you with renaming. It is a "service discovery" protocol.
But if you tell us the model, someone may be able to help with renaming.

Similar Messages

How to change the printer name in the User profile in the run time.

Hi
I am in need to change the printer name in the run time.
Do any one hav idea about this?
Thanks
Karthik

The user default settings can be changed using funtion module SUSR_USER_DEFAULTS_PUT.
Import parameter USER_DEFAULTS-SPLD will hold the default printer name.

To change the printer name while printing the invoice

Hi,
I have a requirement like if there is already an entry in NAST table with o/p type ZURD and printer name USJC-PM03,then an error message has to be displayed like 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' on the vf03 screen.
But even if I change the printer name from 'USJC-PM03' to 'LOCL',it is showing the same error message.This message should not be shown.
I have used the following code in the program.
lf_formname = tnapr-sform.
determine print data
PERFORM set_print_data_to_read USING    lf_formname
                                 CHANGING ls_print_data_to_read
                                 cf_retcode.
IF cf_retcode = 0.
select print data
    PERFORM get_data USING    ls_print_data_to_read
                     CHANGING ls_addr_key
                              ls_dlv-land
                              ls_bil_invoice
                              cf_retcode.
ENDIF.
IF sy-tcode = C_VF03.
    SELECT SINGLE * FROM tnapr WHERE kschl = 'ZURD'
                                   AND nacha = 1
                                   AND kappl = 'V3'.
    SELECT count(*)
    FROM NAST
    INTO lv_count
    WHERE objky = ls_bil_invoice-hd_gen-bil_number
    AND    kappl = c_v3
    AND    kschl = c_ZURD
    AND   ldest = c_PM03.
    IF LV_COUNT GE 1.
      Message e000(zup) with text-001 text-002 text-003.
    ELSE.
determine smartform function module for invoice
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
             EXPORTING formname           = lf_formname
                variant            = ' '
                direct_call        = ' '
             IMPORTING fm_name            = lf_fm_name
             EXCEPTIONS no_form            = 1
                        no_function_module = 2
                        OTHERS             = 3.
call smartform invoice
          CALL FUNCTION lf_fm_name
               EXPORTING
                          archive_index        = toa_dara
                          archive_parameters   = arc_params
                          control_parameters   = ls_control_param
                mail_appl_obj        =
                          mail_recipient       = ls_recipient
                          mail_sender          = ls_sender
                          output_options       = ls_composer_param
                          user_settings        = space
                          is_bil_invoice       = ls_bil_invoice
                          is_nast              = nast
                          is_repeat            = repeat
     importing document_output_info =
*Uncomented the line to get the spool id or OTF formatted data -
*NY047532
               IMPORTING
                      job_output_info      = w_job
NY047532
                job_output_options   =
               EXCEPTIONS formatting_error     = 1
                          internal_error       = 2
                          send_error           = 3
                          user_canceled        = 4
                          OTHERS               = 5.
      ENDIF.
    ENDIF.
When should be done for the error message not to be shown when the printer name is 'LOCL'.

Hi,
Here my requirement is first the user has to check the nast table if there is any entry with o/p type ZURD and printer 'USJC-PM03' .If there is an entry then an error message 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' has to be displayed.
Then if i close this popup window which is showing error message and change the printer name from 'USJC-PM03' to 'LOCL', and click on execute button,the printer name is not getting changed and still the error message is getting displayed.How to remove this error message?

To change the printer name

Hi,
I have a requirement to change the printer name when the user tries to send the invoice with the same o/p type second time also.How to change the printer name?

We have a field in NAST table which tells us whether the copy is printed for the first time or more then once. Read the value basing on the output type (i.e., Message type in nast table)
Now in your driver program & modify the parameter OPTIONS that are passed to function module OPEN_FORM, goto Option and pass your printer name according to your requirement.
Ex: if <print> = 1.
<printer name> = 'XXX'.
if <print> GT 1.
<printer name> = 'YYY'
Close the thread once your question is answered.
Rgds,
SaiRam

Can't see printer name in the print dialog box as the printer name is too long

This is actually causing siginificant pain as I am using a tablet and moving around a number of floors/buildings needing to be able to print from where I am.
When printing from Acrobat reader, the print dialog box that comes up does not have a horizontal scroll bar and does not fit in the names of the printers in my organisation. We are unable to change the printer name, so it basically means that when using Acrobat, we can't select a printer.
All other windows applications show more characters and also have a horizontal scroll bar in the print dialog box so you can scroll across to see the rest of a long printer name. Why is acrobat not using the standard windows print dialog?
Has anyone come across this? Help!

This is the Acrobat forum, not the Reader forum. In the future you should check there. I am not sure why you can not change the printer name, unless you do not have administrator rights. The name of the printer has nothing to do with where the print copy is sent. It is just for the purpose you mentioned of identifying the printer to print to. If you are not the administrator, ask your IT folks to change the name for you and explain why.

Need help with changing the product name for a HP LaserJet Pro 401n to use on a ePrint network.

I am in a school environment, naming printers is imortant.
Bonjour Service Name and Device Description name have been changed. IOS7 devices see the Bonjour name but ChromeBooks see the Product name. How can I change the Product name on the printer so that it is then recognized by HP Connected and shown to ChromeBook devices?

You should be able to change the product name in Google Cloud. The ChromeBook uses Google Cloud to print (Google Cloud uses HP ePrint). Log into your google account and change the printer name there.
I am an HP employee.
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

HT4356 I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office?

I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?

You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.

How to change the print queue name with Lexmark printer?

Is it at all possible to change the print queue name from Lexmark_3500_4500_Series, to something shorter? I try to link printouts from an old Sun Unix system, thru my iMac to the Lexmark X4580 multifunction printer. However, the Sun/Unix will not accept this long print queue name...

Apologies, I misread. The only way I know of changing the Print Queue Name is by readding the printer.
 > System Preferences > Print & Scan > Add
Choose your printer, make sure you change the print queue name to something different (equates to the Printer Name).
When you need to print, simply select the printer you just added.
Once your happy it works, delete the old printer from the list in Print & Scan.
Morgan

I can not print a report from my quicken program because the printer name has the word on in it

I recently purchased and installed a HP Officejet Mobile L411 printer. For all apps. on my computer (Window&) the printer name is as follows: HP officiate Noble L411. On my Quicken program the printer name is as follows: HP Officejet Mobile L411 on USB001. In checking Quickens help/troubleshooting guide, Ifound thirst statement, make sure the printers name doesn"t contain the word "on". My question is how do I get my printers name in Quicken changed so it doesn't contain the word "on"

Try opening the PDF in Preview and see if it will print out of it.

Script : how to change the Field name in standard program(ZM_MEDRUCK)

Hi Experts,
I am working with SAP SCRIPT. i need to change the Field Name that is PO NO to Document No & PO DATE to Document Date.
These are assigned in data declaration as gv_name and gv_date.
Can anyone help me to change this Fields.
Regards,
Vijayan.R

Hi,
You can archive this by making change in SAP script only. You don't need to touch the standard prgm.
Debug the script and find it out which fields (In script editor) are printing these text on layout... then just replace them by creating your own text...
You can create a text in TTDTG table,, like ZZPO_NAME = ( Document Name),, and use this filed in the script editor.
&ZZPO_NAME&

How to change the computer name

I need to change the computer name but after this I cannot access to the historical data (printing alarms).
I have already changed the settings in Options->System and restarted the system.
With MAX 3.0 I can see that all the alarm records are stored with the old computer name \\computer name\process\....
How can I do to read the old alarms with the new computer name?
Thank you
Michael

Hi,
When you change the computer name in Options>>System, you are not changing the name of the computer. Rather, you are telling Lookout to log to either a remote or local system. Here are the specifics:
1. Computer Name: Name you want the traces to appear with (\\computer_name\process\...)
2. Default Computer: Computer you want to log to. If the name listed here is different than your computer's name (as seen by Windows), then it will attempt to log directly to that remote machine.
3. Default Path: Directory on either your local or remote machine that you want to log to.
To change the name of your local computer, you will need to do that in Windows. If you have WinXP, you can do this by right-clicking on My Computer and selecting Computer Name.
Go
od Luck
Mike

How to change the file name of pdf file in html page?

Hi,
Actually my requirement is to upload 50 PDF files containing javascript in each file into flex page with the help of one html page.
i did the the javascript part by using batch processing.
now i want to call those pdf files one after another without changing the file name in html page
the code written in html page is
<html>
    <body>
        <object id="PDFObj"
                data="http:\\localhost\pdf\20090807 - Batch 630.pdf"
                type="application/pdf"
                width="100%"
                height="100%">
        </object>
        </body>
</html>
So every time i have to change that file name to acess another file.
Is there is any other way to sort this problem????
Plz anyone help me to sort out this problem with some code or some example.

I once had a similar task for creating a webpage that I only use on my computer--a webpage that accesses PDF's and SWF's font previews from a list of fonts as "a href's". What you must do is utilize the power of the command line, whether on a Mac on a PC or on Linux, Linux being the most powerful (although Mac IS Unix). You must utilize variables, variable replacement, and then a command to print out the results of a "for" or "while" loop to a text file which will be your HTML file with each individual link automatically built into the HTML code. You will have a list of 50 links. If you are simply looking for a GOOGLE type functionality where you click on "Next" and "Previous" you will have to dig deeper into variable replacement--this I don't know how to do yet but there are books for command-line shell interpreters. One shell interpreter is called "bash" (born-again shell) and there is a book on the market which gives a detailed example of how to replace variables in a shell script. Again, I don't know how it works. I will try to learn this at a later time when I am more seasoned with the basics of shell scripting.

Change the attachment name while sending PO as mail..

Hi,
I’m able to send PO Form through mail using NACE, configuration for output type.
But my Attachment name is always showing as ‘Print Data‘.
My requirement is to change the attachment name as below.
Program: SAPFM06P
Script: Z_SD_PORDER
Please help on this issue.
Thanks in advance.
Regards,
Kumar

I didn't find any field with PACKING_LIST in program 'SAPFM06P'.
If we create the copy of 'SAPFM06P' kindly let me know where I need to change the same..
in form entry_neu using ent_retco ent_screen.
the below is the code.
*   INCLUDE FM06PE02                                                   *
form entry_neu using ent_retco ent_screen.
   data: l_druvo like t166k-druvo,
         l_nast like nast,
         l_from_memory,
         l_doc   type meein_purchase_doc_print.
   clear ent_retco.
   if nast-aende eq space.
     l_druvo = '1'.
   else.
     l_druvo = '2'.
   endif.
   call function 'ME_READ_PO_FOR_PRINTING'
        exporting
             ix_nast        = nast
             ix_screen      = ent_screen
        importing
             ex_retco       = ent_retco
             ex_nast        = l_nast
             doc            = l_doc
        changing
             cx_druvo       = l_druvo
             cx_from_memory = l_from_memory.
   check ent_retco eq 0.
   call function 'ME_PRINT_PO'
        exporting
             ix_nast        = l_nast
             ix_druvo       = l_druvo
             doc            = l_doc
             ix_screen      = ent_screen
             ix_from_memory = l_from_memory
             ix_toa_dara    = toa_dara
             ix_arc_params = arc_params
             ix_fonam       = tnapr-fonam          "HW 214570
        importing
             ex_retco       = ent_retco.
endform.
Kindly give the clear view.

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

Please keep in mind that Aperture is not an enhanced iPhoto, it is a different application with a different philosophy and a different intended audience. If you approach it with that in mind you will have a lot less frustration as you learn Aperture.
Aperture adds a layer of complexity that is not needed by many. iPhoto is a very powerful application and fits the needs of many amateur photographers.
As for your original issue, as I said I am surprised that iPhoto allows you do switch countries like that and am not surprised that Aperture doesn't. If this is something you really need to do working in Aperture but using iPhoto to order the prints is a good work around and will not be all that difficult to do once you get the hang of it.
As for your new question, the books in iPhoto and Aperture are different enough that the code that created the book in iPhoto wouldn't work in Aperture. What happens when you import an iPhoto library into Aperture is that the images in the book are combined into an album in Aperture with the same name as the iPhoto book. You will need to re-create the book in Aperture uaing the images in this album.
Hope this helps, post back if you have anymore questions.
regards

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

Change the printer name

Similar Messages

Maybe you are looking for