Change the status of the request from Released to un released.

Dear all
Some requests were created with no target system and were released.
these requests are to be transported to our Production System.
Is there any other way to transport these requests?
things I tried.
1. I tried to find the files in Cofile and datafile but could not find in trans folder.
2. tried to add the objects to new requests but facing problem while adding the key to the request.
Regards
Mahesh

Hi,
you have created the requests as local requests, it means you haven't mentioned Target system it will be treated as local requests so it wont create Cofiles and Datafiles.
and you can use the option Transport of copies and check. actually u can't change the request from the Rleased to Unreleased.
you have to create new request that's the only way if your not able to copy the objects to the new request or if the transport of copies wont work.
-Srinivas.korva

Similar Messages

  • Change the status of inspection Lot from 'Created' to 'Released'.

    Hi,
    I am having the below scenario.
    We have QM active in our plant. In the material master records we assign two inspection types '01' - Goods receipt insp. for purchase order &  '08'- Stock transfer inspection. I didn't make any inspection plan (QP01).
    We make a Purchase order ( say Qty=10)with excisable tax code. While doing GR (MIGO) for the purchase order, we capture and post Excise Invoice. Later, Usage Decision is done using QA11(7 qty to unrestricted stock type & 3 Qty to Blocked Stock). Later, i want to send the blocked stock to the vendor, I am transferrring the material from Blocked stock to QI stock type using MT349. But, system is showing the below warning message : 'Preparation for the quality inspection could not be comleted. -Message no. QA187'.
    Please let me know how we can change the status of the inspection lot from 'Created' to 'Released' so that I can proceed further making the Return delivery to vendor using T.Code: MIGO.
    Thanx in advance.
    Regards,
    Phani

    Hi
    Check the Usage of the Task list.
    Check the date of creation of task list must be prior to creation of lot.
      Go to QA02
    Inspection specification > Assign task list by click on Task/ specification
    Go to Sample, do the SAmple calculation
    Save
    Check whether lot status is Rel
    Regards
    Sujit

  • Siebel Hangs up when changing the status of service request

    Hi,
    We are facing this typical problem since last 2 weeks. When closing the SR, CRM hangs for random(unable to detect a pattern till now) SRs.
    The steps we follow to an SR is:
    1. Enter the SR #
    2. Change the status to "resolved"
    3. Type the resolution in "resolution" text field and click on white space.
    4. A new row gets generated with status "unscheduled"
    5. Place a check mark near the newly generated row.
    6. Change the status of the SR to "closed"
    Now, some SRs get stuck at step 3. When clicking on white-space, CRM hangs.
    We've tried everything from clearing IE cache / temp / cookies / increasing temp file size (to 5000 in IE6 and 1024 MB in IE7)
    Even set-up a fresh system but no avail.
    Even changed the primary internet link to secondary one but no help.
    On top of that the SRs which make IE hang seem to be appearing randomly. Sometimes I can close 20 SRs at a stretch and sometimes 1-2 SRs get hanged every 4-5 SRs.
    Once in a while an error pops up: "The selected record has been modified by another user since it was retrieved. Please continue (SBL-DAT-00523)"
    No one else was working on the SR when such errors came.

    You can ave a runitme event or workflow triggered that can generate such behavior.
    First increase logging on your object manager (evtloglvl :) ) and look at any error message.
    Second assess with your development team what automation has been setup ranging from script, Business Services, workflow to assist you in troubleshooting.
    Best Regards
    Evtloglvl

  • Service Requests in E-Service - Change the status of a request

    Hi All,
    We had setup a ICSS B2B web for return order management.
    We have a requirement that once the service request is created by the User "Customer service representative" he should be able to manually change the status of the request in the web such as " In process" ->"Rejected" or "Approved" ->"Completed.
    Please advise on how to proceed with the above requirement.

    Hello Yves,
    Thank you for this information.
    I'd like to tell you that, we are using a shared transport directory and the transport management system is configured properly.
    But I think that, changing the status of the transport requests (the field IMPFLG) in the table TMSBUFREQ would be a possible solution, although I'm not sure, if this is the right way.
    What I intend to do is the following: change the field IMPFLG ("tp Import Flag") for the transports, which have been already imported, but appear in the import queue with the status "Request waiting to be imported" .
    At the moment the field IMPFLG of these transports is set to "1" ("Request waiting to be imported") and I'd like to change it to "2" ("Request already imported") .
    Would it work like this? Will the correct status of the transport requests be displayed in the TRX STMS?
    Thank you in advance for your help.
    Kind regards,
    Noémi

  • How can I change the status of the fileupload UI from disable to enable?

    Hi, experts,
    The Version of my Netweaver studio is 7.0.11.
    I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
    How can I change the status of the fileupload UI element from disable to enable?
    Best regards,
    tao

    Hi
    look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
    and check if u bind each file upload element to binary property in the context

  • FM to change the status od DSO Request

    Hi All,
    I need a Function Module (FM)  to change the status of the request in the DSO and subsequently able to delete that request.
    As I am unable to delete a request manully form the manage tab.
    Regards,
    Mayank

    Hi Dennis,
    Thanks your your reply.
    I tried giving the IP technical name and the requets ID. Nothing is happening.
    It remains in the same state. Any other pointers.

  • User exit or other enhancements to change the status of the kanban.

    The requested to trigger the movement when the kanban status changed from empty to full.
    if itu2019s possible to use user exit or other enhancements to change the status of the kanban.
    can you please guide me iam new for enhancements.

    I think you're seeing standard SAP behavior.  However, a discussion with your SD/LE functional team member might be beneficial. Personally, I don't think SAP supplies a way to "add back" to that quote.  However, you might develop something that changes the quantity on the quote (essentially adds to the original quantity), based on the fact that a SO line got rejected.

  • RE: Mail notification on changing the status of the spport desk messages

    Hi,
    I am facing problem with the automatic mail notification in service desk configuration.
    When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
    Regards,
    Sowmya

    Hi,
    there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
    It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
    Regards,
    Dirk
    @Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
    It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG].

  • Changing the status of the sales order item based on reason for rejection

    Hi All,
    When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
    I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
    Regards,
    S.Subasree

    Hi subburamaiah
    If you want the report you can create a separate SIS report . In that take the input field  as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
    Regards
    Srinath

  • ALV Report to display the status of the requests raised through ESS

    Hi All,
    We have to develop a ALV report to display the status of the requests raised through ESS
    for Leave, Travel & Event Management, Travel and Appraisal workflows.
    ESS Travel, ESS TEM, ESS Apraisal workflows are associted with SAP Business Objects.
    we are using the function module SWI_WORKITEMS_OF_OBJTYPE_GET to get
    the top level work item id's by passing the object type like PDRELA_025, BUS2089.
    By using SWP_WORKFLOW_LOG_READ function we are getting the workflow log
    by passing top level work item id's as imort parameter. 
    The report output should have the following fields
    Initiator, Initiator Personal No, Request Type( Leave, Travel etc.. )
    Date of application of the request, Status ( Approved by RM, Rejected etc )
    Name of the Approver, Approved / Rejected Date.
    The logic should be work for all the above ESS workflows and should be generalized.
    Can any one please let me know the procedure to get the required information from the workflow log.
    It would be great if any one suggest on the same how to proceed further to get the information as mentioned above.
    Thanks & Regards,
    Jagadeeswara Rao Balla.

    Hello,
    You can get most of that information from fm SAP_WAPI_GET_HEADER, input is workitem_id.
    regards
    Rick Bakker
    Hanabi Technology

  • To change the status of the KANBAN

    Hello Experts,
    Please let me know how to change the status of the KANBAN from empty to full.
    Thanks in advance
    Best Regards,
    zubera

    Hi zubera,
    As quantum has suggested we can change the status of the Kanban in Kanban board...... in additon to that the GR of the replenishment object created through kanban (PO , Production order , STO) etc changes the status of the Kanban.
    Regards
    Kaushik

  • Change the status of the bank statement posting

    Hi,
    Happy new year.
    A bank statement was posted to the sub ledgers but it was not posted to the General Ledger, even though it has an * as the document number.
    Consequently, the G/L is not reporting the correct balance, and for year end reporting we need the correct figures.
    I have tried to post it via FEBP, (with "suppress subsequent postings" & "Bk posting only" selected), but no data was selected.
    How can I post the statement to the G/L?
    Can I change the status of the bank statemetn from "posted" into "to be posted" and try it again?
    Thank you for your feedback.
    Kind regards,
    Linda

    Hello srikanth.
    Thank you.
    How can I check that?
    Kind regards,
    Linda

  • Change the status of the notification center in iPhone programmatically or atleast read what the status is  for a particular application

    Is it possible to control and change the status of the notification center in iPhone for a particular application.
    1)      In the application push notification is implemented.
    2)      Once this application is installed we can see the app in the notification center.
    3)      There is an option to ON or OFF
    4)      In the application we need an option to check if the above option is ON or OFF.
    5)      If the option is OFF we need to provide the user an alert stating that  in the notification center has it option off and here we have to provide an option to user to switch ON the option at the notification center.

    Well, I could find a fix for that.
    My mistake was that 1: I wasn't getting the correct ntype code for my value list type. And 2: I wasn't giving the Id name.
    The new result came as this:
    statusObjRef = doc.getStatusRef();
    statusHome = IBeanHomeLocator.lookup(session,statusObjRef);
    status = statusHome.findUniqueByNameType("Drafting Agreement", 1);
    doc.setStatusRef(status.getObjectReference());
    In case anyone has this problem, you should check the collection of values internal id, that's the actual ntype code (the number you send on the second parameter).
    But I could still use help having some advice on the Master Agreement elements handling (getting data from the master agreement or the data thas is being edited at the moment before saving).
    If anyone could give some advice, they would be very welcome

  • Is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how?  Will the status of the games be the same?

    is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how?  Will the status of the games be the same?

    As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519
    If you want to copy over your progress then you will need to try backin up the iPod and restoring that backup onto the iPad - you can't just restore individual apps, it's all or nothing.

  • How to know the status of concurrent program from back-end in oracle apps

    Hi,
    Can you please explain me step by step how to know the status of the concurrent program from back end in oracle apps.
    Thanks,
    Raj

    When a record is being updated by a form, if you create a Pre-Update trigger on the block, the trigger will run for each record being updated.
    Same thing happens with a Pre-Insert and Pre-Delete trigger.

  • Change the status of the service ticket in crmd_order

    Hi,
    i want to change the status of the ticket with out changing manually in  the transcation crmd_order.
    I need the program to change the status based on transction number(service ticket number)
    Please guide me is there any FM to get that.
    Thanks in advance,
    Suresh

    Got the solution:-)
    It is defined in customization that when the status is closed, no changes can be done. So by removing that customization my code works both for both closed and open charms.
    Thanks,
    vinod.

Maybe you are looking for

  • How to connect to Pgsql on server through jdbc with java on local machine

    I am developing an application in which I have to connect to my database that is in Pgsql and Pgsql is installed on Linux server. I am going to access that from my java program and the java is here on my local computer(in Linux). All the intranet con

  • Output type issue

    Hello, I have created new Z* output type and done all confirguration related to this. When trying to save this output type for one of the material doc.  in transaction  MB02 - >  Details & Messages, am getting below message "Express Document "  Updat

  • ORACLE server session terminated by fatal error

    Hi, When i try to startup my database(10g), i am getting this error after database monted. ORA-00603: ORACLE server session terminated by fatal error. (Startup nomount is ok) conn /as sysdba Total System Global Area 1048576000 bytes Fixed Size 122339

  • No internet access at home

    I have my music on an external hard drive. I purchase songs at work - w/ internet access. I can't play them at home because I have no license on that computer. Can i get one without having access to the internet?

  • Conversion of Planned order in APO

    Hi there ,               I am SAP PP consultant & learning APO ...... I will ask many question that may sound very simple but please excuse me. As per my undrestanding we can create planend order in APO & then transfer that to R/3 or other way we can