Change to dependent hierarchy

Hi Gurus,
I would like to know what is the impact of change the hierarchy properties from no time dependent to time dependent hierarchy, at present we are uploading any change from flat files but now we want to change to time dependent hierarchy, the problem...i don't know the impact of this as we have a lot of infocubes that contain this characteristic and queries as well.
Could anyone please advice
thanks a lot,
Victor

Hi Victor:
   Take a look at the examples on this URL.
http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a6702e07211d2acb80000e829fbfe/content.htm
Regards,
Francisco Milán.

Similar Messages

  • 0CS_Item with time-dependent hierarchy

    Dear Experts,
    we are discussing pros and cons for a time-dependent item catalog (characteristic 0CS_item with time dependent hierarchy in BW) within consolidation SEM BCS 4.0. Does anybody has experiences on this topic?
    I am quite sure it will be a performance issue and it means additional reporting effort (e.g. using reference period/year in the report comparing different hierarchies).
    I am not sure if there are any other risks so I it would be great if anybody has some hints.
    Thanks in advance,
    Birgit Laux
    Message was edited by: Birgit Laux

    Birgit,
    Some other things to consider:
    - frequency of changes to item hierarchy. Could lead to a lot of item hierarchies in BW over time.
    - hierarchy validity date does not seem to be displayed when running web queries and thus makes it difficult for the user to select the correct hierarchy when executing the query. Still looking for a fix for this.
    - greater complexity in overall design. Is it really necessary to achieve correct financial statement presentation?
    Virtual cube performance is not great but you could implement the data mart which provides typical BW query performance.
    I stayed away from setting the item as time dependent for these reasons.
    Brian

  • CO-PA Realignment: Changes in Product Hierarchy

    Hello all,
    We have changed the product hierarchy on some of our materials and we want to realign the PA data to reflect the same.
    Our product hierarchy which we have three levels is maintained in KES1. There are no derivation rules. KES1 is updated manually everytime any changes occur.
    For example:
    OLD
    Product: 1-189-01
    Hierarchy 1: 100
    Hierarchy 2:A7300
    Hierarchy3: B56220
    So on the material master the prod hierarchy is 100A7300B56220
    NEW
    Product: 1-189-01
    Hierarchy 1: 125
    Hierarchy 2:A7500
    Hierarchy3: B56120
    I tried using KEND for realignment and this does not change anything. Any help, how to proceed with the realignment is appreciated.

    Hi Anusha,
    Did u also update PH level in KES3 - in specific hierarchy variant ? Also would like to know how did u reset the operating concern
    Thanks,
    Samik (SAP MM)

  • Creation of Time Dependent Hierarchy in R/3

    Any ideas on how to create a time dependent Hierarchy in R/3?
    Do we have any existing functionality we can leverage in R/3 for creating and maintaing time dependent hierarchy or through ABAP coding in R/3?
    Any ideas or documentation will be helpful.

    Hi Jasmine,
    check this documents/links to get an idea how to set up hierarchy extractor in R/3
    [How to Create a Hierarchy Extractor for Employees and their Department Managers|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20a709c1-0a8e-2a10-21b4-f779728c63bf]
    Re: Build Hierarchy with ABAP
    How to create datasource for hierarchy
    Double post: Creation of Time Dependent Hierarchy in R/3
    Regards
    Andreas

  • 0ORGUNIt time dependent hierarchy not showing all valid nodes in BO , but in BW its correctly shown

    Hi All,
    We have 0ORGUNIT hierarchy shown in one of the Webi reports. 0ORGUNIT is time dependent hierarchy.
    In BW report we can see below nodes for hierarchy
    Hierarchy                     Valid From         Valid To
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
        Z05 Branch 2                 01.10.2013        31.12.9999 - Child Node
        Z05 Division                   09.12.2013        31.12.9999 - Child Node
    In BO webi we can see only two nodes
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
           Z05 Division                   09.12.2013        31.12.9999 - Child Node
    Any idea why in BO webi the other node is not shown ? This is happening only for time dependent hierarchy and only in BO not in BW.
    Thanks,
    Shraddha

    Hi Shraddha ,
    Check at webi query panel level any restrictions applied to hierarchy levels.
    Check at BEx query level,select 0ORGUNIT ,hierarchy -Expand to level .
    Here specify Max level.
    lastly, check any filters/restrictions applied on data.If yes,remove restrictions.

  • Time dependent hierarchy structure in SEM-BPS

    I want to use a time dependent hierarchy structure in sem BPS to make combination chek and proposal in a layout.
    I have manage a relation of type hierarchy (based on this hierarchy) in the characteristic relationship tab page of my planning area.
    I open my layout to make entries in the future (next fiscal year) but the system doesn't propose me the datas valide for the next fiscal year in my hierarchy but the datas validate today.
    There is a key date in the master data tab page of the planning area but it seems to have only effects on attributes with validity dates but not with hierarchy with time dependent hierarchy structure.
    Thanks for your help.

    Hi,
    The key data that you enter in the planning area is only for time dependent characteristics and attributes. For the hierarchies in the characteristic relationships the current data is used.
    If you still want to use a time dependent hierarchy for modeling the characteristic relationships you could use a characteristic relationship type exit. In the exit you can read the hierarchy with the proper date.
    Best regards,
    Gerd Schoeffl
    SAPNetWeaver RIG BI EMEA

  • Time-Depended hierarchy and BEx-Queries

    Hi Gurus, Masters,
    I have ONE time-depended hierarchy for 4 periods (times):
    1, 2, 3, 4
    I have 4 columns in Query with 4 periods:
    1 col for 1 period,
    2 col for 2 period,
    3 col for 3 period,
    4 col for 4 period.
    I have 1 row with this hierarchy.
    How can i share this hierarchy in my columns by validity:
    for 1 col -> this hierarchy for 1 period,
    for 2 col -> this hierarchy for 2 period,
    for 3 col -> this hierarchy for 3 period,
    for 4 col -> this hierarchy for 4 period?
    Any answer will be very appreciated.
    Thank you.
    Is this possible?
    P.S.
    I have 2 solutions found.
    Message was edited by: AndyML

    Hi Shashi,
    One of the ways:
    Create a variable type customer exit - in properties of the IO - in the 'select hierarchy' window there is a 'Variables' checkbox for key date.
    Calculate the last date of the entered period/year in the exit.
    Best regards,
    Eugene

  • Time Dependant Hierarchy in BEx

    Hi All,
    I have created a query on top of 0PS_C04.
    In my master 0Project i have a hierarchy which is being displayed through BEx.
    Now with every new fiscal year, new projects are added to the hierarchy.
    When I run the query then all the projects of the hierarchy are displayed irrespective of the year they belong to.
    My problem is that I want to display only 2009 related projects when i execute the report for 2009 and so on for the years that follow.
    Can somebody please suggest a way out???
    Thanks.
    Regards,
    Rohit

    Hi,
    Are you using option : Time dependent hierarchy or Entire hierarchy is time dependent. If it's the latter, then you can just restrict your query with the hierarchy having end date 31.12.9999. Using key date option is also convenient.
    --Akashdeep

  • Time dependent hierarchy creation in R/3.

    I know  you can do it in BW. Any ideas on how to do it R/3? Do we  have any existing functionality we can leverage in R/3 for creating and maintaing time dependent hierarchy.
    Any ideas or documentation will be helpful?

    Hi,
    check this threads:
    Custom Datasource for custom Hierarchies
    How to create Hierarchy data sources in R/3
    How to create a hierarchy datasource in R/3
    Double post: Creation of Time Dependent Hierarchy in R/3
    Regards
    Andreas

  • BPC 10.0 - Time Dependent Hierarchy?

    Dear All,
    In BPC 10, is time-dependent hierarchy allowed/used?
    Any pointers will be appreciated.
    Thank you!
    Regards,
    Peri

    Hi Peri,
    Please, read here: Time dependent hierarchy with BPC10 NW - Planning and Consolidations Use cases
    B.R. Vadim

  • How to achieve time dependent hierarchy in SAP BO Disclosure Management

    Hi all experts,
    We are proposing a SAP EPM solution to a client. The overall solution consist of a planning tool (BPC 10 NW) and a disclosure management tool (SAP Disclosure Management 10).
    The Disclosure management tool will retrieve the planning budget figure from BPC 10 NW, and consolidate into a financial statement.
    Understand that in SAP BPC 10 NW there is a new feature call "Time Dependent Hierarchy" which allows defining the hierarchies based on a time range and the roll up behavior will be different based on the time the data belongs to. However in Disclosure Management it is currently not supported as a standard feature, therefore is there any workaround solution to achieve time dependent hierarchy in disclosure management ?
    Thank you !
    Regards,
    Elvin

    Hi Elvin, did you get a solution to your question.
    Can you share it. Thanks

  • We need to change of dependent demand requirement in IDP

    Hi gurus,
    when i click selection profile, we need to change of dependent demand requirement in Interactive Demand Planning screen, what is the procedure. System showing display model.how to change dependent demand requirement.
    REGARDS,BABU

    share the solution with us. please

  • Change the standard hierarchy

    Hi, I want to know the effects that I could have if I change the standard hierarchy of my Cost Center Group.

    Elsa,
    You could change your standard hierarchy but after you will have problem with your analyses.
    you will not be able to compare yours data. The reports are based one the Standard hierarchy.
    But if your can explain the differences to your company ....
    Regards
    Valérie
    Message was edited by: valerie secondy

  • How to make Attribute Change run alignment & Hierarchy changes in Aggregat

    Hello
    I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
    I posted previously the same question but there were not good answers and i was not able to understand clearly .....
    If there is Process chain XXY which makes Attribute change run for Master Data 0SPELLING ?
    Now there is Aggregate TRT which includes :
    0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
    Now pls answer following question ?
    1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING , Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ? YES or NO
    2) If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY completes and finish job ?
    3) If No, then what steps are suppose to be DONE so as to make sure that Aggregate TRT has new values and perfect values for 0SPELLING ?
    Please answer and coorect if i have any wrong question....

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • How to make Attribute Change run alignment & Hierarchy changes in Aggregate

    Hello
    I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
    I posted previously the same question but there were not good answers and i was not able to understand clearly .....
    If there is Process chain XXY which makes Attribute change run for Master Data   0SPELLING ?
    Now there is Aggregate TRT which includes :
    0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
    Now pls answer following question ?
    1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING ,   Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ?         YES or NO
    2)  If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY  completes and finish job ?
    3) If No, then what steps are suppose to be DONE so as to make sure that  Aggregate TRT has new values and perfect values for  0SPELLING ?
    Please answer and coorect if i have any wrong question....

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

Maybe you are looking for

  • My mail rules and signatures just disappeared.  (OS 10.9.2)

    All of my mail rules and signatures just disappeared. What happened and how can I retrieve them?

  • Call java 1.6 class from oracle 11g

    Hi Friends Can we execute a JAVA 1.6 compatible code under Oracle 11g JVM? 1.5 compatible code is running fine under Oracle 11g. But code compiled using 1.6 throws following exception: ORA-29552: verification warning: java.lang.UnsupportedClassVersio

  • How to patch DemoIdentity.jks with new host name

    Somehow, after WebLogic was installed on a particular box, the DNS name for the local host was changed slightly. I created a domain on that box and I was about to start a managed server from the admin console, and I noticed that the NodeManager was n

  • Status down

    i've just install OEL 5 and EBS 12.0 after completion of post install and apply the patch only HTTP componenet is Alive, how to make other comp alive? am i missing something. log 02/02/12-06:00:38 :: adapcctl.sh version 120.6 02/02/12-06:00:38 :: ada

  • Trouble Installing iTunes 8

    I have a ACER ASPIRE 5315 (OS Vista). I had iTunes 7 but started having problems, so unistalled (COMPLETELY). Trying to install iTunes 8 but keep getting error message *'The folder path "C:" contains an invalid character'* I have downloaded and saved