Change width of the addremovelist

hi,
how could i change the width of the addremovelist (not the row option). currently the list i have is too long and i would like to make it shorter with a scroll bar. is it possible with the addremovelist?
thanks,
lee

Hello,
I have a similarly problem. I use an addRemoveList in my page and I want to set the width of the two lists to static value (like width=300px and not width=auto). Can you tell me if this is possible in Java Studio Creator 2?
Thank you!

Similar Messages

Can we change width of the column at runtime

I have a report with columns assigned runtime, can we change width of the colimn runtime?
for example Query: select &lp_1, &lp_2 from emp &LP_Where
if i assign lp_1 empno size 10 and empname size 50. Vertical and horizantal elasticty is not going work for me. Any suggestions please..
Lalitha

Doubt there is the dynamic you are seeking.
But you may put a few overlapped columns (diff. length of course) and display/hide by passing parameters.

Skinning table. Change width of the table.

I want to change width of all table so that sub-control-bar gets affected too. I've learned that there's no way to define it that way:
af|table {
width:60%;
and if I write:
af|table::content {
width:60%;
and then change width of sub-control-bar component to the same amount it doesn't look the same...

Hello,
I have a similarly problem. I use an addRemoveList in my page and I want to set the width of the two lists to static value (like width=300px and not width=auto). Can you tell me if this is possible in Java Studio Creator 2?
Thank you!

Change width search field

How can I change width in the iTunes "SearchField"?

How can I change width in the iTunes "SearchField"?

The html container doesn't change size according to the width of the website, but instead the width of the window.

As stated. The html container doesn't change to match the content on the website (like Internet Explorer does), it changes to match the screen size. That way, when you scroll horizontally, elements disappear because the html container is the size of the screen and in a fixed position.
Example (my problem): http://www.elitepvpers.com/forum/web-development/1847846-question-css-html-width-problem.html
Happens with most websites such as...
http://google.com/
http://co.91.com/index/
http://www.w3schools.com/
http://stackoverflow.com

locked by moderator as dulicate

Change the column width on the fly

Dear all,
I have a problem, i have a matrix report, the row is "the project name" and the column is "the items" using within each project, and the problem is the items are variable from time to time the report run for each project, so its exceeds the paper width.
And the question is, is there any way to change the width of the column on the fly, i mean dynamiclly change the column width each time the report is called to make all items fit the paper width.
Thank u

i don't think that we can change the layout of the column in reports
The simple solution for that problem is that u have to
fix the horizontal and vertical layout of the text item
better is to post this problem at reports forum
Najeeb

How to change the width of the whole portlet layout?

Dear all,
As we know, now the width of portlet layout has set to 100%. But there is a new requirment from my customer that the width of the whole portlet layout view must be set to 750px.
So I tried to edit the css file and I found a block:
#pt-portal-content-view
     margin-top: 0px;
     width: 100%;
I tried to change the width to 750px, but nothing happened.
I want to know the way to change the width, thank you all!
Regards,
finall
OK,I have found the place to do it:
.portalContent          {
     display: block;
     width: 750px;
I set to 750px,then it works.:-)
But another question, how to make the content align to the center? I tried a stupid method, add margin-left:
.portalContent          {
     display: block;
     width: 750px;
     margin-left: 120px;
In 1024 X 768, it's ok, but it don't work well in 800 X 600.
When I set the all content width to 750px, I tried the three columns view, the portlet still run over the border.If there is any way to control this? thank u in advance!
Regards,
finall
Edited by finall1980 at 02/01/2007 10:09 PM

Try this:
.portalContent {
display: block;
width: 750px;
margin: auto; /* for properly-implemented browsers */
text-align: center; /* for IE 6 */
As for running over the 750px, there's nothing you can do about that other than actually narrowing the columns AND making sure that your portlet authors don't produce content that's too wide.
Chris Bucchere | bdg | [email protected] | http://www.thebdgway.com

Problem while changing the width of the Indesign document through inx.

Hi Guys,
I am facing a problem related to the width of InDesign documents. Description of the problem is as follows:-
I have created an InDesign document with height = 700 and width = 500 and export this as an inx file (lets say Doc1.inx).
As "Doc1.inx" is just an xml file I have made certain changes to the height and width fields of the dcoument in it. (Height =900 and Width = 600)
For Height changes are made under following tags :- <docu>
                                                                               <docp>
                                                                                 phgt = "U_900" ;
For Width changes are made under tags :- <docu>
                                                                <docp>
                                                                  pwdt = "U_600";
Now when I opened the modified "Doc1.inx" file with InDesign the modifications for height are correctly reflected, but the width of the column doesn't gets changed. Please open the attachments to see the difference.
Attachment contains the snap shots of documents created at step 1(Initial_Doc1.indd) and step 3(Modified_Doc1.indd).
What should be the modifications we have to do in inx file to reflect the correct modified width of the document. Also is there any document or article which gives the correct understanding of the tags used in inx files.
Any help will be appreciable.

I'm having troubles getting any sensible values at all using CS -- on the other hand, you forgot to mention your version, so I figgered I could try.
(Just as an example, setting width & height to 600 pt and 900 pt -- you don't mention your units of measure either, is it meters? inches? -- I get "phgt="u_408c2000~0" pwdt="u_4082c000~0"", which doesn't make sense. Cicero's!? [*])
But further below, I can see some definitions for columns: count (colc="l_1") and some measurements in that same system, which I suspect to be the width and height you are looking for. You switch between describing you succesfully changed the width and height of the document, and complaining the column does not change. Apparently, the column width is defined in itself, rather than using the "document marges" you are used to in the interface itself.
[*] On second look, I can see more hexadecimal digits in other 'numbers'. It must be hexadecimally encoded IEEE floating point numbers -- "408c2000" decodes to 4.378906, and 4082c000 to 4.085938 -- both valid floating point numbers, but still I wouldn't know in what system.
I hope your version uses regular decimal notation!

How do I change the width of the "polygon splitter" line?

I have Ultiboard v10 with all the updates. I have been unable to find a way to shrink the size of the line that the polygon splitter function uses. The split seems to be stuck at 0.1 inches. Anyone know how to change this setting? Thanks for any help.

When you start drawing the line that will act as the polygon splitter, make the first click where you want to start... then --before you do the second click-- go to the toolbar and look for the numeric field where you can change the mils width of the trace you are drawing... change the number there and see how the splitter line changes its width... no go back to the workspace, you still have the line drawing utility on, make the second click where you want to drop it and you should see a different width split line.
The other method is, after you make the first click to mark the beginning of the line, continue towards the place where you would like to finish that line, however, before you do a left-click to finish the line, first do a right-click and you will have an option to widen and an option to narrow.
I prefer the first method is more precise...
Nestor
National Instruments

How do I change the width of the x-scrollbar for a waveform graph?

I have a LV7.1 application that contains a waveform graph and must be usable on several PC with widely varying screen resolutions. I have decided to position and scale the front panel objects programatically, including the graph itself. The appearance of the graph is satisfactory on all screens, except for the x-scrollbar. The width of the x-scrollbar does not change when I change the size of the graph. I cannot figure out how to change the width of the scrollbar programatically to match the adjusted size of the graph. Any suggestions?
Regards,
Chris

Chris,
I don't think that you can change the width of the x axis scroll bar programatically. One thing you could do though is create your own scrollbar and change it's properties as your program runs. I wrote a quick example of how you could do this and I've attached it to this thread.
I hope this helps,
Justin D.
Applications Engineer
National Instruments
Attachments:
ChangeXScrollbar.vi ‏116 KB

How to change the width of the auto complete drop down list?

Hi,
I implemented an autocomplete mechanism, using ICompletionSession and ICompletionSourceProvider. I have an issue with the size of the drop-down list opened when I use this autocomplete mechanism. The width of the autocomplete list remains the same, even
if the strings displayed change. This is apparent especially when I hit "backspace" on the already typed string, while the drop down list is opened: the deletion of the last character allows for more completion strings to be used, but since the drop
down width does not change, the longer strings appear cut.
Is there a way to force the drop down list to recalculate its width?
Yoel

I don't think there's any way, even VS itself can't do that you know, and the interfaces don't have such kind of events or properties.

How to change the width of the field?

Hi all,
I would like to decrease the width of a field on my report.
But I can't do it in the Property palette. I am not able to change the width property. The width of the database column is varchar2(255). I do not want to decrease the length of the database column, but only the width property of the field.
Any ideas?
Regards
Leonid Pavlov

You can't change that from where you are trying because that info is coming from the database. To resize the field just open the layout editor and size the field to the size you want.
Thanks,
Tom

How to change the width of the variable screen?

Hi
like in the subject mentioned i need to know how i can change the width of the variable screen....
right now i have to scroll if i want to see the right part auf the variable screen...
maybe i can change the width with css?

Hi,
Using CSS specify the table width for the variable screen and include the Css in the header section of the table.

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to change the width of the bar of bar charts?

Hi,
I am using Crystal Reports 11.
I created some stacked bar charts. Now, I want to change the width of the bar. Some one told me that I can't do that because it's totally controlled internally by Crystal Reports.
Really?
If could, how could I do?
Thank you in advance.

Hi,
The only way you can set the width of the bar is by going to Chart Options (Right-click Chart in Preview Mode > Chart Options > Appearance tab > Decrease the Gap Width).
Hope this helps!
-Abhilash

Change width of the addremovelist

Similar Messages

Maybe you are looking for