Change Windows Password at VPN Login

Our users connect to our PIX 515e using the Cisco VPN client. I recently enabled RADIUS on a Windows domain controller to provide user authentication. However users now have a problem if their Windows password expires.
When logging into a Windows machine you will be presented with a warning to change your password when it has expired. But through the VPN this is treated simply as an expired password, and you can't login.
I know there is a way to do this. I saw it at a friend's company.

I do not think this feature is available in 6.3, you might want to check the release notes for 7.2 to see if it is available there.

Similar Messages

I recently changed my password and cant login

I just recently changed my password and cant login I'm getting an error do I need to change it again?

You can't login where?

Changing user password on first login

Hi all,
I'm using a customised login panel on my external facing portal homepage. I have changed the look and feel of default sap login screen by modifying the logon.par file.
Now, I want to replicate the standard portal scenario. When an user logs in for the first time then a change password screen should be displayed (same as when we create a new user and log-in to the portal).
The problem as of now is that when i create a new user through user management and try to login to my external facing portal using this user id then it doesn't login nor it shows any error messages nor any password change prompts.
Please help me in this regard.
Thanks,
Prasanna

Hi Prasann,
It great that you have modified the Login par but have to done the necessary changes , refer to this weblog
Modifying The Logon Par(or customising the Logon Screen)
for changing Password at first login
Start the Config Tool C:usrsap<SID><instance>j2eeconfigtoolconfigtool.bat
Ex: D:usrsapF02JC00j2eeconfigtool --> configtool.bat
Navigate to cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
Look for the property "ume.logon.security_policy.password_change_allowed = TRUE"
Save & Restart the J2EE engine.
Thanx
Pankaj

My 5-minute-old AppleId account was disabled immediately for security reasons. I have followed instructions carefully and although I seem to be able to change my password, I cannot login using the new password bcs account disabled for security reasons!

It is probably something to do with the fact that I am in the Philippines, but what am I supposed to do? According to the support options I have to pay to open a support ticket. My account was not verified when it was disabled and I think I might be in some sort of deadlock in which the password reset won't work because I'm not verified, and the verification won't work because I can't log in.
I've never bought a single Apple product before and this has got to be the worst intro I could have imagined!

Solved.
After about an hour on the phone with US support (who were very helpful I must say) it turns out that if you do not have an iTunes account with credit card information and a billing address, you are very much more likely to get your AppleId account disabled "for security reasons". This begs the question of course as to whose security we are talking about here! But there you go. If you are an Apple first-timer, get an iTunes account, fill in all your details, and you should be alright.
Thanks for everyone's suggestions.

Fingerprint Reader not working after windows password reset

Hi There
I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
Why finger print is not working after windows password reset? What should I do to login?
Help would be appreciated!!

I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
1. You should change fingerprint while changing windows password. I don't understand the reason behind it, btw is this true?
2. We can't do anything for this issue.

How to generate a notification when a user changes his password?

Hi all,
I have OIM 11.1.1.5.0 BP02 installed. When an administrator resets a user's password, the following email is sent to the user:
Password has been reset for user <Firstname> <Lastname> . You will be required to change your password on next login.
First Name: <Firstname>
Last Name: <Lastname>
Password: passW0rd
+For any issues, please contact [admin email or phone]+
My requirement is to generate a similar email when a user changes his/her own password. How would I go about doing this?
Thanks in advance.

You can use an event handler for this.
Write your own code as a plugin for the event handler (refer to the developers guide for details on event handlers) then you can reference this from your custom event handler XML configuration with operation "CHANGE_PASSWORD"
e.g.
<action-handler class="<CLASS NAME>" entity-type="User" operation="CHANGE_PASSWORD" name="<EVENT HANDLER NAME>" stage="postprocess" sync="TRUE" order="2000" />
The action "RESET_PASSWORD" is also available for administrator change.

Trying to Change AD Password from GW2014 failing

Hello,
I've got the Caledonia books by Danita and I am preparing to upgrade / move our GW2012 edirectory system to 2014, then migrating that to AD. In preparation, I have set up a test GW2014 server and set it to authenticate LDAP against AD. I was easily able to get a user to sync and login to both the 2014 client and webaccess. However, when I try to change the password for this user through either client, the attempt fails with the following error in the POA:
17:10:43 4233 Error: LDAP failure detected [D06B] User:gw2014test (gw2014test)
The closest TID I have seen on this is for GW 2012 where it says that LDAP passwords in GroupWise were designed to work with eDirectory so the function does not work in other LDAP servers?!
Any help would be much appreciated!
Thanks

I don't believe there is a way to check for expired pwd. I'll check with developers though.
--Morris
>>> davearre<[email protected]> 8/1/2014 4:36 AM >>>
Hi, Morris,
Awesome, thank you that worked!! After I posted my question I tried to
do the SSL but got LDAP error 81 on the POA because I exported the DC's
certificate and not the CA's. Once I followed your steps and exported
the CA certificate I was able to login and change the password without
error in both the client and webaccess.
One more question, I tried to do a "user must change their password on
next login", which is what we do now with eDirectory with new teachers
especially in the summertime, they can change passwords from home before
they arrive. With edir and an expired password, Webaccess puts up a page
for them to change their password. It also does this at password
expiration time. When I set the user must change password in AD, I could
no longer log into webaccess at all, it acted like the password was
incorrect. Is there a trick to get the change password page prompt in
Webaccess or is this something not available with AD as the
authentication source?
Thanks for your quick help!
mblackham;2327566 Wrote:
> You can change your AD password via the GW 2014 client, however, due to
> requirements of AD, the LDAP session must be SSL'ized to do so. So
> you'll have to export the CA cert that your AD LDAP process is using and
> import it in to the AD directory configuration in GW Admin Console.
> Here are the high level steps to getting the AD cert:
>
>
>
>
> •Run MMC on the Domain Controller
>
> •Add the “Certificates” Snap-In for the Computer account. (File |
> Add/Remove Snap-Ins)
>
> •Find the certificate issued to the domain controller in the
> “Personal/Certificates” folder.
>
> •View the certification path for the certificate, locate the CA and
> view it’s properties.
> Export the CA certificate as a DER or PEM file
>
>
> --Morris
>
>
>
> >>> davearre<[email protected]> 7/31/2014 3:36 PM >>>
>
>
>
>
> Hello,
>
> I've got the Caledonia books by Danita and I am preparing to upgrade /
> move our GW2012 edirectory system to 2014, then migrating that to AD.
> In
> preparation, I have set up a test GW2014 server and set it to
> authenticate LDAP against AD. I was easily able to get a user to sync
> and login to both the 2014 client and webaccess. However, when I try to
> change the password for this user through either client, the attempt
> fails with the following error in the POA:
>
> 17:10:43 4233 Error: LDAP failure detected [D06B] User:gw2014test
> (gw2014test)
>
> The closest TID I have seen on this is for GW 2012 where it says that
> LDAP passwords in GroupWise were designed to work with eDirectory so
> the
> function does not work in other LDAP servers?!
>
> Any help would be much appreciated!
>
> Thanks
>
>
> --
> davearre
> ------------------------------------------------------------------------
> davearre's Profile: https://forums.novell.com/member.php?userid=14696
> View this thread: https://forums.novell.com/showthread.php?t=478544
davearre
davearre's Profile: https://forums.novell.com/member.php?userid=14696
View this thread: https://forums.novell.com/showthread.php?t=478544

How can i change my password when i open my mac?

where do I go to change my password when i login?

Change password?
http://support.apple.com/kb/PH10746
Reset Password?
OS X 10.7 Lion /10.8 MountainLion
Follow the instructions in the first and the third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
http://support.apple.com/kb/TS1544
Best.

Prompt to change initial password

Do you know if it is possible to have a prompt to change initial password on GDS console login?
How can it be implemented?
Thank you

Hi,
I think, it is possible to prompt User to change initial password on login.
Please go through [this link|http://help.sap.com/saphelp_gds20/helpdata/EN/45/1104685aa66cbfe10000000a114a6b/frameset.htm] for more details about User Management in GDS (in the "adding a new User" Section it is clearly mentioned that new user is required to change the password at first login. )
Hope this helps.
Regards,
Shiv

How to change user passwords

On my Lion server, I want to create several user accounts, mainly for use with the wiki server. I want to force them all to change their passwords at next login. I see the checkbox in Workgroup Manager for this preference, but how do I use it? It doesn't seem to work with the wiki login, because if I enable that checkbox, the user cannot login; they get an error "incorrect user name or password". These users don't have access to login to the system GUI.

Thanks. Can you give me an example of "logging into their network accounts"? What are all the ways they could do this? I know SSH and AFP would work, but these users don't have access to either of those. I'm creating all these user accounts solely for wiki use.

Open Dir, SMB, AFP, Changing Password on first login (Windows)

Hey all...
I've read up on some documentation but have run into a roadblock trying to set up file sharing for Open Directory user accounts with OS X Server 10.5.6.
I have AFP and SMB (and Open dir) services enabled.
Using all default settings I am able to share files using other Windows and OS X machines.
Under the Open directory service settings in Server Admin, I tried to enforce that user passwords be reset on first log in.
When I log in using OS X, I get prompted to change my password and it works fine. When I'm using Windows (XP in this case), the username/password prompt that windows presents outright rejects the initial password. So when forcing users to change passwords, Windows users can no longer log in to share files.
I've attached the SMB log that correspond to the attempted log in from the Windows machine.
[2009/01/28 18:12:49, 0, pid=1913] /SourceCache/samba/samba-187.7/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(383)
opendirectoryuser_auth_and_sessionkey gave -14161 [eDSAuthNewPasswordRequired]
[2009/01/28 18:12:49, 0, pid=1913] /SourceCache/samba/samba-187.7/samba/source/auth/authodsam.c:opendirectory_opendirectory_ntlm_passwordcheck(598)
I'd appreciate any advice =)

Hey all...
I've read up on some documentation but have run into a roadblock trying to set up file sharing for Open Directory user accounts with OS X Server 10.5.6.
I have AFP and SMB (and Open dir) services enabled.
Using all default settings I am able to share files using other Windows and OS X machines.
Under the Open directory service settings in Server Admin, I tried to enforce that user passwords be reset on first log in.
When I log in using OS X, I get prompted to change my password and it works fine. When I'm using Windows (XP in this case), the username/password prompt that windows presents outright rejects the initial password. So when forcing users to change passwords, Windows users can no longer log in to share files.
I've attached the SMB log that correspond to the attempted log in from the Windows machine.
[2009/01/28 18:12:49, 0, pid=1913] /SourceCache/samba/samba-187.7/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(383)
opendirectoryuser_auth_and_sessionkey gave -14161 [eDSAuthNewPasswordRequired]
[2009/01/28 18:12:49, 0, pid=1913] /SourceCache/samba/samba-187.7/samba/source/auth/authodsam.c:opendirectory_opendirectory_ntlm_passwordcheck(598)
I'd appreciate any advice =)

I want to change my iCloud account. Buying iPad we gave a virtual (forwarding) email addr. We need to change to a real address. But when we try to change the iCloud account, we can only change the password. Note: we don't have Mac, only iPad and Windows.

I want to change my iCloud account. Buying iPad we gave a virtual (forwarding) email address.
We need to change to a real address.
But when we try to change the iCloud account, we can only change the password.
Note: we don't have a Mac, only an iPad and Windows.

Welcome to the Apple Community.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

802.1X cannot change expired password at login

Hi all,
I'm trying to roll out 802.1X authentication for wifi access at my company, however there's one major problem I can't for the life of me figure out. I'm not able to get the Macs to prompt for a password change when the password has expired at login.
On Windows when you log in it will prompt you to change your password when it's expired. However on OSX when you're on the workstation login screen, you can see the wireless icon briefly connect, then it will think for a bit and the user cannot log in at all.
OSX can definitely can change expired passwords via 802.1X, as if I log into a local account and connect to the wifi with the user whose password has expired, it will prompt to change it, and changes it successfully.
I'm using NPS for RADIUS authentication against AD, and using Profile Manager in OSX Server to create the 802.1X profile.
Does anyone have any experience with OSX and using WPA Enterprise/802.1X Profiles?
Thanks!

Hi,
Can you post a screenshot for this situation?
Sometimes, the third party credential provider would lead to some issue like this, I suggest you check the
current credential provider via the following path:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\SessionData\x\LastLoggedOnProvider
You should compare the result with the values in the following path:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\credential providers
If the current value is third party credential provider, try to disable it:
To disable the provider add a REG_DWORD value "Disabled"=1 to that provider’s CLSID subkey.
The provider will be disabled on the next session creation (sessions are created when you log off, switch users, or reboot.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Windows 2008 R2 Active Directory User can not change their password

Our AD domain already having two domain controllers with windows 2008 (not R2), last week we added one more domain controler with windows 2008 R2 for that we run domain prep and forestprep. After this domain no users can change their password by pressing ALT+CTRL+Del--Change password. Administrators can still reset the password, and if administrator provide the option change password and at next logon, it works, users can reset the password. But after login they can not.
The error telling the new password does not meet length,complexity, history requirements. We are sure their is no Group policy which setting password/account policy. And even we tried to attach a simple password policy domain level with out complexity.
Please provide a feedback..waiting for your response.
Thanks

additional info: up to Server 2008 R2, Windows ONLY supports ONE Password policy PER Domain. (exept: the R2 supports more pw-policies, but not with gpo, it has to be congifured with ADSI-Editor)
So, in case you still use the 2008 / R2 - you Need to know that ;))
regard..
Stephan Ertel - MCITP/MCSA -
From Windows 2008(Non R2) and higher is supported for more than one password policy with fine granted password polcy.DFL should be 2008.
HTH
Biswajit Biswas
My
Blogs|MCC
|
TNWiki
Ninja
Best regards Biswajit Biswas Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin

Password policy "change password at first login" errors!

Complete panic!
I've updated to OS X Server 4.1 and all my users appear to be ok. All green lights within the server app. Computers are NOT giving the red light 'network accounts unavailable'. However, no one can login. Every user, new and old, are being prompted at login to create a new password (say: Password 1). They type in a new password (say: Password2), the box shakes like it didn't accept it. However, if they try to login again, it won't accept Password1. If they type Password2, they again get prompted to change the password.
So it looks like it's accepting the password, but stuck in this reset password loop.
I've checked in the server app and workgroup manager. Neither have 'reset password at first login' selected.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname. If the server and clients are all running OS X 10.10 or later, directories should be shared with SMB rather than AFP.
5. Follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. Reset the password policy database:
sudo pwpolicy -clearaccountpolicies
14. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

Change Windows Password at VPN Login

Similar Messages

Maybe you are looking for