Changes made on my iPad do not appear when plugged into iTunes; missing album art on iPad.

If I make changes to the music on my iPad--i.e. delete songs/albums, add ratings, add a song to a playlist--when I plug my iPad in to view the contents in iTunes, none of these changes have been saved. The deleted music reappears, the ratings do not show up, and the new songs are not in the playlist.
Additionally, when I have my iPad plugged in to my Mac, all of my album art shows in iTunes. However, if I look at the music on my iPad by albums, much of my album art is missing.
Any suggestions?

Visionplace, i have the issue where my ipad2 changes/edits to my current playlists are NOT synced up with my itunes 11 on my computer (Windows 7).  I have icloud and Itunes Match is turned on.  My settings are to auto-sync and i have ALL my music set to be synced, not just select playlists. (Note I have not tested whether new playlists will appear because i usually just edit my existing ones).
So whenever i make playlist changes on my ipad2 (e.g., add or delete songs), i see the changes correctly on my iphone 4, and my Apple TV within 15 minutes without taking any steps, but they do NOT appear on my itunes 11 on my computer (Windows 7).  The only way i have found to get the ipad2 playlist edits onto my itunes on my computer is to sync my iphone4 up with the computer. (My ipad changes are already on the iphone 4 automatically). My computer's itunes 11 CAN see the playlist edits i have made on the iphone4 (immediately), but not the ipad.  It *****, but it works for me.
For new music purchases (from itunes store) on my ipad2, the only way i can see them on my itunes 11 on the computer is to go to the store, and download them again. Otherwise, they will not appear.
Note - in another forum when i was researching this ipad sync issue, someone had stated that the ipad/computer sync is one way. (I.e., from computer-to-ipad only). If true, that would explain why the ipad edits and new music purchases dont show up in my computer itunes. However, the iphone sync must be two ways.

Similar Messages

  • Album art is not appearing on my iPad but appears when plugged into iTunes.

    Hi everyone -
    Having a major issue: I have about 8000 songs accumulated on my iPad Mini 3 with Retina display [running iOS 8.2] from my main computer in a different country. All my album art used to appear and everything was all well and good until I plugged my iPad into my MacBook Pro this morning to charge. While charging, I made one small spelling correction to an album error, at which point my iPad started to sync and then all the album art disappeared from my iPad. When I play the music in iTunes with my iPad connected, the album art appears in the small square at the top but whenever I play it on my iPad, there is no album art.
    Is there a fix to this inconvenient issue? I'd appreciate your help!

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Restart your mobile device.

  • My iPad will not let me log into iTunes because it says that there is an un excepted server, and I have no idea what to do

    My iPad will not let me log into iTunes because it says that there is an un excepted server, and I don't know what to do

    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

  • Why does my ipad say "not charging" when plugged in?

    Why does my ipad say "not charging," when plugged in?

    http://support.apple.com/kb/HT4060
    Read the KB article.  Make sure you are using the 10W adapter that came with the iPad or a High-Power USB 2.0 port.

  • My new iPad mini will not charge when plugged into adapter. Any suggestions?

    my new ipad mini will not charge when plugged into adapter. What should I try?

    Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My ipad air cellular says it is not charging when plugged into wall socket but after a few hours it has charged but still says not charging

    my ipad air cellular says it is not charging when plugged into wall socket but after a few hours it has charged but still says not charging
    please help with this little annoying problem

    for five weeks since i got it still doing it but it is charging so it is weird

  • IPhone will not charge when plugged into computer

    My phone was not working, and so I took it to the apple store nearby. Here were the problems:
    -error message saying "this device not made to work with iPhone"
    -would not charge when plugged into computer OR wall charger
    -person on other end of phone calls said i sounded really far away and had trouble hearing me
    -when i shut it off, it restarts itself immediately
    -cant do a manual reset holding the power and center buttons at same time
    -when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
    At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
    Is there any way they will replace my iphone at no charge?

    Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
    And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
    I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
    But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

  • HT1347 I have movies on my Hard drive that I would like to add to my iPad how do I get them into iTunes to download to my iPad question mark

    I have movies on my Hard drive that I would like to add to my iPad how do I get them into iTunes to download to my iPad?

    READ the article from which the question was posted.  Then follow the instructions for importing content to iTunes on the computer.
    Once the content is in iTunes, connect the device, select the content desired to sync, and sync.

  • IPod will not update when plugged in iTunes.

    My iPod when plugged into iTunes, it says updating but after about 3 seconds it says that it couldn't update because the Compaq_Owner's Playlist had been deleted or no longer exist. I am not really sure what to do. My iPod is completely empty. If anyone could help me out i'd be greatly appreciative. I really need it before Wednesday of next week because I have a ten hours drive and we all know how radid stations can be.

    http://discussions.apple.com/thread.jspa?messageID=607312&#607312

  • TS1503 My iPhone 4 says that there is not enough memory to download apps like Facebook and Instagram. When plugged into iTunes it says that 4GB is filled with "other". How do I clear the "other"?  What is this?

    My iPhone 4 says that there is not enough memory to download apps like Facebook and Instagram. When plugged into iTunes it says that >4GB is filled with "other". How do I clear the "other"?  What is this?

    Other is usually around 1 GB...
    A  ' Large Other ' usually indicates Corrupt Data...
    First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
    Details Here  >  http://support.apple.com/kb/HT1414
    More Info about ‘Other’ in this Discussion
    https://discussions.apple.com/message/19958116

  • Toshiba backup drive not recognized when plugged into thunderbolt display.

    My Toshiba backup drive does not mount to my MacBookPro when plugged into my Thunderbolt Display. It works beautifully when plugged directly into my MBP, and other USB devices work beautifully when plugged into the same USB ports on the Thunderbolt Display.
    All my equipment is pretty new. The Toshiba is currenlty configured to be my Time Machine back up drive.
    Laptop: 15" Macbook Pro, 2.8 GHz Intel Core i7, 16 GB 100 MHz DDR3, Mac OS 10.8.5
    Backup Drive: Toshiba 500GB Canvio® Basics USB 3.0 Portable Hard Drive
    Apple Thunderbolt Display: 2560 x 1440, NVIDIA GeForce GT 650M 1024 MB graphics
    When I plug the backup drive into the TB Display, usually nothing happens. The blue light on the drive doesn't come on, and it doesn't mount to the desktop. If I wiggle the USB back there, sometimes the blue light will come on, and sometimes it will mount for a minute then go away. This is true for all 3 USB ports. I have not had problems with any other USB devices, but the only other ones I've plugged into the Thunderbolt are my keyboard, bluetooth headset charger, and other items that probably use less power than the backup drive.

    But the cable works when plugged into my laptop. Plus, the cable connection is pretty specific to the device; I'm not sure if you can buy another one seperately.

  • Camera not working when plugged into certain USB ports

    I just purchased a Creative Live! Cam for use on my dual G5 running 10.5. When I plug the camera into the USB port on the front of the Mac, it works fine with iChat.
    However, when I plug it into the back of the monitor (older style Cinema display), it says it is in use by another application.
    Any idea how to resolve this? The cable isn't terribly long and the machine is several feet away from the monitor, so I'd like to use the ones on the monitor. (Obviously it gives a power-error message when plugged into the keyboard, which is normal).
    Thanks

    Seems like it is a USB 2.0 or not problem
    10:38 PM Saturday; August 23, 2008

  • Changes made in Book Module do not "stick" when the book has been duplicated

    Lr 5.2 stand-alone version (not CC) – Win 7 64-bit
    I had made a duplicate of the book (right-click the book Collection and select <Duplicate>). Then I made changes to the original book – changed the font for captions and for body; changed the wording of the body text; changed the padding for images. At some point in the process these changes did not '”stick” anymore. The changes were visible as long as I worked in the Book Module. But the changes were gone and the book reverted to the previous state as soon as I went to the Library and back to the Book Module. Same thing happened when I closed Lr and re-opened it.
    Replacing the Preference File did not change this behavior. But when I deleted the duplicate book the behavior of Lr went back to “normal”, i.e. the changes now “stick”.
    In my opinion there must be a bug that prevents that changes “stick” when after a Duplicate of a book has been created.

    You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
    Do you have the latest patches?
    When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
    If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
    Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
    As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
    Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
    If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
    Good luck!

  • My iPad does not appear under "devices" in iTunes

    When I connect my iPad 2 to my PC (Windows 7), it does not appear under "Devices". I have tried all the steps described in "Trouble-shooting". It does, however, recognize and show my iPod nano, when I connect that through the same USB. I have already deleted and reloaded iTunes 10.4 three times. Incidentally, I had no problem when I was using  previous version of iTunes before I updated it 5 days back.

    Thanks Rudegar.
    Finally what worked? I removed all the Apple software files from my PC. Rebooted my PC. Downloaded iTunes afresh, saved and run it. Ah..ah.. my iPad was under the devices this time and it synchronised well. I am happy. Thanks
    Ved

  • Photos Do Not Appear When Dragged Into Ibooks Author

    I formatted my images to 72 DPI .png files and when i drag and drop them into Ibooks Author I can see them, I can manipulate them, resize,  add captions.  When I do a test the images appear in the text view portriat mode of the Ipad but when in the landscape mode, the images do not appear. There is just a blank space with a caption.   If I create a photo widget and drop the photo inside I am able to see it on the Ipad however that widget does not allow me to resize as I would like.  Does anyone have a fix for this issue or an idea?
    Thanks
    Chris A. 

    Confirm your process here:
    Optimizing performance in your iBooks Author books
    ...and try jpg for photos instead of png.
    And remember - layout in landscape...edit in portrait. Always delete a placeholder image before adding your own.

Maybe you are looking for