Changes not displaying properly in the Develop Module

When I make a change in the Develop Module, the changes are not displayed correctly in the main window, and the navigator window turns grey. When I return to the Library Module, the changed image is correctly displayed. Then when I return to the Develop Module, the changes are correctly displayed. I followed the troubleshooting steps and at one point Adobe says the user permissions might not be right. I created a new user, and in the new user profile, LR works as it should. I am using Windows 7. What do I need to change in the old user's 'permissions' to match the new user's 'permissions'? I would prefer to delete the new user, rather than re-create my computing environment all over again.

If you see grey windows in Develop it is almost typically a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you don't own a calibrator, try going into your monitor's properties pane. Go to the Color management tab and delete any profile associated with the monitor.

Similar Messages

  • Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

    Hello:
    Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

    Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
    Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
    Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
    There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
    The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
    Good luck,
    Hunt

  • Arabic characters not displayed properly in the preview mode

    Hi,
    I am preparing a tool in arabic and all arabic characters seem to be displayed correctly in the design mode, but become illegible in the preview mode or when exported in flash (swf). Help much appreciated.
    Gregor

    Hi Gregor
    I think you're out of luck. There is no Arabic language pack for Xcelsius.
    When you're in design mode, you're using the Windows OS features, but when you try to preview or export then Xcelsius begins the process of converting the xlf to a swf. And since there is no lang pack it doesn't know what to do with the Arabic characters.

  • Opening PDF files using preview on some PDF file result in the content not displaying properly. The file I tried to look at has pictures and text. The pictures are displayed ok but the text is shown as pixalated boxes. The same file opens ok via a PC.

    Solutions please. Accessing PDF files online using preview normally works ok. However there are a clutch of files on the mothers union web site that although can be opened, present text as pixalated boxes. The pictures contained in the documents are however displayed OK. I experience the same problem on my Imac and my wifes laptop that runs Lion. The same site has other PDF files that can be opend OK. If I access the same problem files using a PC laptop running microsoft windows, they are opened OK with the text displayed as it should be. This is driving me mad....

    Raymondo1 wrote:
    The offending PDF files were created using word
    Yes. Word 2007. (You can see it in Preview if you do ⌘I or choose Tools > Show Inspector.) And it's the transparency issue. The three pics attached show the Jan 2012 newsletter (a) in Preview, (b) in Acrobat Pro, (c) again in Preview, after I saved it in Acrobat, flattening the transparency.
    For you, the solution is to use Adobe Reader -- with due note taken of
    <http://www.adobe.com/support/security/bulletins/apsb12-01.html>
    For them, I don't know. Presumably, they wish max compatibility for their newsletter, but I really don't know how Office 2007 generates PDF. Maybe they should check transparency settings and flatten before generating PDF? Or perhaps save as PDF v1.4 instead of PDF v1.5? I would use Distiller, but perhaps they can't afford it.

  • Quarters are not displayed properly in the reports

    Hi all,
    I'm experiencing some troubles while loading data from PeopleSoft Financials v9 (with demo data) into Oracle Business Intelligence Applications 7.9.6.1 : W_MCAL_DAY_D seems not to be properly filled, as I have some lines where the quarter is empty.
    As a matter of fact, I have GL reports where a fiscal year is split into 5 quarters : for instance 2000 Q1, 2000 Q2, 2000 Q3, 2000 Q4 and 2000 Q.
    !i50.tinypic.com/33e1w8n.jpg!
    Fiscal periods & calendar configuration are loaded from PeopleSoft. Have some of you already experienced this kind of problem ?
    Thank you for your support !

    Solved !
    The problem was due to a table that wasn't loaded in PeopleSoft : PS_CAL_SUMP_TBL.
    By setting up a summary calendar in PS (with quarters), it enabled me to properly load W_MCAL_DAY_D with MCAL_QTR and MCAL_PER_NAME_QTR.

  • Mouse over values not displaying properly for the Combination Chart

    Hi All,
    A Combination Chart has the following details:
    Primary Y Axis has Revenue in mn $.
    Secondary Y Axis has %.
    When the mouse over is being done, 4% is being displayed as .04
    It should be displayed 4% & not as .04
    The Mouse over values has the Number format as u201CNumericu201D.
    Sometimes, it works in u201CGeneralu201D format. (%)
    However, there is no control on the no of decimal places displayed for the value of Revenue (Primary Y Axis value).
    Whereas, in Numeric format, decimal places can be adjusted.
    Secondary vertical(value) Axis Labels has "Percent" as the Number format.
    Please suggest a solution.
    Thanks,
    Raghu Ram

    Hello.
    Look I have an idea, I donu2019t know if you already try it.
    Please give the format that you want percentage, decimals etc...
    In the Excel where the charts are being directed
    Then redirect de chart to the same cells, these with the porpoise of refreshing
    Now each serie have the format.
    Please let me now what happen with these

  • The folder could not be found in the develop module

    I moved the photos from C: to D: as my c drive out of space, now if I open the catalog I cannot edit the file How can I re point the catalog to drive D?

    Adobe Lightroom - Find moved or missing files and folders

  • Lost all changes made in the develop module in lr5

    I have lost all changes that I made in the develop module. Most of these photos where stacked with the raw copy on top of the jpeg.  Then I had picked the ones I liked and make changes to them in the develop module.Then I and changed them to DNG. This was over two weeks ago and I think I was trying to put them in to a collection. Now all I see is the originals as they appeared on the day they where imported.

    Yes, it seems like you have two catalogs and imported into both.
    I suggest strongly you view some video tutorials on AdobeTV before you get into a tangle.
    http://tv.adobe.com/product/lightroom/
    and look here also: http://forums.adobe.com/community/lightroom/lightroom_for_beginners?view=discussions

  • Pages are not displaying properly

    Hi
    I am using EP 7.0 SP 7.0. Some of the pages (like new ivew creartion page, Identity management page under User Administration etc.) are not displaying properly. The background is showing totally white and only the buttons and text are visible.
    Though these pages were working fine before.
    Is there any configuration change which is causing this?
    Any suggestion ??????

    Hi,
    SAP recommends to use fully qualified domain names, when using the portal.
    For example, to enter into the portal use "http://machine_name.company_name.com/irj/portal., instead of "http://machine_name/irj/portal". 
    Failing to do so may lead to inconsistency in communication on client side between the page and iViews.
    Regards,
    Srinivasan T
    <b>helful answer=>points</b>

  • Images not displayed properly.Any advice on that?

    Hi,
    I found the following code inside the forum and i'm trying to understand it.
    It appears to be a problem though. In particular the images(chess-pieces) are not displayed properly. The background of the gif images should be transparent but is not. Any advice?
    Thanks
    Here is the code:
    import java.awt.*;
    import javax.swing.*;
    public class ChessBoard10 {
    static final int PAWN = 0;
    JFrame frame;
    JComponent[][] checker;
    public ChessBoard10() {
    frame = new JFrame("CHESS GAME");
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container con = frame.getContentPane();
    con.setLayout(new GridLayout(8, 8));
    checker = new JComponent[8][8];
    for (int row = 0; row < 8; ++row) {
    for (int col = 0; col < 8; ++col) {
    JComponent p = new JPanel();
    p.setBackground(setColor(row, col));
    checker[row][col] = p;
    con.add(p);
    frame.setSize(500, 550);
    frame.setVisible(true);
    Color setColor(int y, int x) {
    Color c;
    if (y % 2 == 1) {
    if (x % 2 == 1) {
    c = Color.white;
    } else {
    c = Color.black;
    } else {
    if (x % 2 == 1) {
    c = Color.black;
    } else {
    c = Color.white;
    return c;
    public void setPiece(Piece pc, int row, int col) {
    JComponent p = checker[row - 1][col - 1];
    //one base -> zero base conversion
    if (p.getComponentCount() > 0) {
    p.remove(0);
    p.add(pc);
    p.revalidate();
    /*test*/
    public static void main(String[] args) {
    int Bpawn = 0,
    Bbishop = 1,
    Bking = 2,
    Bknight = 3,
    Bqueen = 4,
    Brock = 5,
    Wpawn = 6,
    Wbishop = 7,
    Wking = 8,
    Wknight = 9,
    Wqueen = 10,
    Wrock = 11;
    ChessBoard10 cb = new ChessBoard10();
    for (int i = 1; i < 9; i++) {
    cb.setPiece(new Piece(Bpawn), 2, i);
    cb.setPiece(new Piece(Wpawn), 7, i);
    cb.setPiece(new Piece(Bking), 1, 4);
    cb.setPiece(new Piece(Bqueen), 1, 5);
    cb.setPiece(new Piece(Bbishop), 1, 3);
    cb.setPiece(new Piece(Bbishop), 1, 6);
    cb.setPiece(new Piece(Bknight), 1, 2);
    cb.setPiece(new Piece(Bknight), 1, 7);
    cb.setPiece(new Piece(Brock), 1, 1);
    cb.setPiece(new Piece(Brock), 1, 8);
    cb.setPiece(new Piece(Wking), 8, 4);
    cb.setPiece(new Piece(Wqueen), 8, 5);
    cb.setPiece(new Piece(Wbishop), 8, 3);
    cb.setPiece(new Piece(Wbishop), 8, 6);
    cb.setPiece(new Piece(Wknight), 8, 2);
    cb.setPiece(new Piece(Wknight), 8, 7);
    cb.setPiece(new Piece(Wrock), 8, 1);
    cb.setPiece(new Piece(Wrock), 8, 8);
    class Piece extends JPanel {
    String[] imgfile =
    "Bpawn.gif",
    "Bbishop.gif",
    "Bking.gif",
    "Bknight.gif",
    "Bqueen.gif",
    "Brock.gif",
    "Wpawn.gif",
    "Wbishop.gif",
    "Wking.gif",
    "Wknight.gif",
    "Wqueen.gif",
    "Wrock.gif" };
    public Piece(int type) {
    add(new JLabel(new ImageIcon(imgfile[type])));
    }

    Well, without actually testing the code which I most unfortunately can't do since my real computer is chrashed at the moment, try checking the
    boolean Component.isOpaque();otherwise try using .png's instead altough it shouldn't matter.
    This is just some general advices =(

  • Site not displaying properly in IE

    Hello,
    I'm working on building a site from a template. Prior to today I only  opened the site in Firefox and it displays fine. However, in IE for some  reason every page besides the index.html do not display properly. The  weird thing is, the part that is messed up should be the same as the  index.html because they're from the same template.
    Does anyone happen to know what I messed up?
    Here is the site...
    http://testtreks.onlinewebshop.net/index.html

    I'm working on building a site from a template. Prior to today I only  opened the site in Firefox and it displays fine. However, in IE for some  reason every page besides the index.html do not display properly.
    Which IE?  What does "do not display properly" mean?  It looks OK to me in IE8.

  • Metadata not displaying properly in movie list view 12.1.0.50

    Has anyone had issues with metadata not displaying properly in iTunes iTunes 12.1.0.50?
    Seems since the last update or maybe even before that the metadata is not displaying properly in the movies/list view window. All seems fine in the movies window with the display, nice art work along with all the metadata which I've been adding with the Subler app. Been using this app a long time and it has always been fine.
    As can be seen in the attached screen shot, the titles of the lower entries are missing and the director information shows where the artists should be.
    When I got to get info everything is as it should be. Any solutions out there?

    I had been experiencing this very same problem, and it drove me crazy. Luckily, after searching for the answer on multiple forums, I found a solution. MetaX is a program designed specifically for tagging iTunes movies. Not only can you manually input all the required information, but you can also automatically input all the information from outside sources from within the program. It worked beautifully for me with my copy of Donnie Darko, which I ripped using HandBrake.

  • French special characters not displayed properly in discoverer 11g

    Gurus
    We are upgrading to discoverer 11.1.1.3
    I have found that French special characters (letters with accents) are not displayed properly in the discoverer tool menu.
    Example
    Sélectionner is displayed as S?lectionner.
    This doesn't seem to be a server issue as one of the tester (in U.S) is able to see the french characters displayed and ironically it is not the case in France itself where this is required.
    Please help
    Regards
    Ariv

    Pl post details of the two clients being used in this scenario - the exact OS version, browser version, browser language settings, Java version etc
    Since the accented character shows on one client , the issue is with the client or the settings on the client where the accented character is not showing correctly.
    HTH
    Srini

  • ProRes footage not displaying properly in AE CS5 at 8bpc

    Just installed AE CS5 and am frustrated to find that Apple ProRes 422 footage (all flavors: HQ, SQ, LT, 4x) does not display properly when the project is in 8bpc mode.
    In 8bpc mode:
    Same frame, in 16bpc mode:
    This behavior does not occur with Uncompressed 10-bit Quicktimes. Only ProRes.
    Obviously now that CS5 is 64-bit aware, switching to 16bpc mode isnt as much of a problem as it was in previous versions, but I often like to work in 8bpc mode for speed/performance reasons, so its a bummer that I cant do this with ProRes sources.
    Is there a workaround for this (other than working in 16bpc all the time, of course)?

    Hi. This is Dan R. from the After Effects team. I'm out of the office for the few weeks, so please excuse me if I don't respond as quickly as I should.
    I'm not discounting what you're experiencing, but the behavior isn't typcial. On my machines, ProRes is working properly at all bit depths. Off the top of my head, I suspect a 3rd party Quicktime codec conflict. Regardless of what is causing your problem, we're committed to making sure this works correctly.
    Do you have Final Cut Pro installed? Do you have any other 3rd party QT components installed? e.g., AJA, Blackmagic, Sheer, etc.
    Please try the following:
    Navigate to your Quicktime codec folder. It's found at harddisk/library/Quicktime and harddisk/username/library/Quicktime. Try dragging the entire contents from these two locations into a temporary location. I use a subfolder on my desktop. e.g. username/desktop/QuicktimeTemp
    Restart After Effects and try using ProRes footage in all bit depths again. Does your problem go away? If so, it's likely an issue with one of the codecs that you have removed. You now should have enough information to isolate the codec that's causing your problems.
    Dan Ramirez
    After Effects
    QA Engineer

  • Why can't I use the Develop module?

    I bought the stand alone version of Lightroom so I would not have to subscribe monthly. Now it is not letting me use the "Develop" module. Please tell me I do not have to have a subscription after I bought the full program.

    I suspect that you did an update recently. In doing so, you have installed from the creative cloud. It is the same program, but it is licensed differently. It will be necessary for you to uninstall that version and then installed from one of these links:
    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1

Maybe you are looking for

  • At selection-screen output and  at selection-screen on

    Hi Experts, I had coded in both at selection-screen output for disabling input of certain fields and at selection-screen for validation like this: AT SELECTION-SCREEN output.   IF p_amt = 'X'.     LOOP AT SCREEN.       CASE screen-name.         WHEN

  • Query for  customer and its all the underlying sites in AR

    Hi Expert,   Please help me to build a query for a customer and its all the underlying sites . Thanks

  • Value help not working

    Hi all, I am trying to develop a small adobe interactive form application embedded in web dynpro java. I am unable to make value help work. I have edited the fieldname = "myFieldName" javascript bit, but to no use. I tried this: Adobe Interactive For

  • ## URGENT ## Where can I biuy an iPad in Berlin this weekend, 4-5 june ??

    I would realy like to get an iPad, but my native country Norway, is not on the list yet. Germany, where I am now, is, but no iPad's found yet... Does anybody know where to look ???

  • Hide jobid no in reports path

    hi all, I have to hide jobid no in reports path as when I am calling a reports from forms it gives reports jobid in address bar of the browser. is there a solution for this.