Changing archived status for target group or segmentation model.

Hello, CRMies!
In SAP CRm WEBUI i set "To archive" flag for segmentation model and now it has status "Archived". The problem is hat it became inactive now and i can't reset this status. I didn't execute any archiving reports, just set the flag on. I was looking for any FM or reports to recover the status.
Anybody knows how to unarchive segmentation model or TG?

Hi Katya,
as far I know the segmentation model is archived with the next scheduled archive run once the status 'to be archived' is set. The status can be undone before the archive run, once this is archived there is no way other then generating the segment again.
Please refer to the online help about further information:
Archiving Segmentation Elements - SAP Library
For target groups andproduct segments there is also a read program in transaction SARA, which you can use to display the archived segmentation elements again at a later point in time, if required.
Furthermore, the information structure SAP_CRM_MKTTG_I is available for target groups and product segments in the transaction SARA.
You can not only read, but can also load archived segmentation models into the system. However, you should only use this function when it is absolutely necessary. For further information, see Reloading Archive.
Since you cannot load target groups or product segments into the system, you need to generate these again to be able to use them.
I hope this helps.
best regards,
Johannes

Similar Messages

Personalization (Cross-Selling Rules for Target Group) in E-commerce

Hi,
Could any one suggest solution for the query...
Scenario: Personalized Cross-Selling for Target Group in a Webshop (E-Commerce-B2B Occasional User Scenario). The Cross Selling is to
appear only for Target Group, but the system is prompting the Cross Selling
Rule for both Target Group aswell Global. The Config details are below
mentioned.
1. In Method Schema (11) we maintained Cross Selling Methods for Global as well
as Target Group.
(CRM_MKTPR_PP_CS_GL_READ & CRM_MKTPR_PP_CS_TG_READ).
(I did remove Global Method for testing, but still it is appearing for Global
Target Group)
2. Created Cross Selling rules in CRM for Target Group Target Group & is
Activated.
3. Target Group Modeling done in Segment Builder.
4. Target Group Assignment done in the webshop.
5. Application Administration related tasks (clearing done).
6. Product Catalog Updated Replication is done aswell.
7. Simulation of Product Proposal is done using program
"CRM_MKTPR_PRODUCT_PROPOSAL"
Please suggest me if I miss anything to recommed Cross-Selling rules only to the Target Group.
Thanks in Advance,
D u r g a r a o

Cartweaver
http://www.cartweaver.com/
Web Assist Power Store
http://www.webassist.com/support/ecommerce-options.php
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to change the icon for 'windows group' in Java 1.6 [Windows XP] ?

Hello,
I was wondering if there is a possibility to change the icon for 'windows group' in Java 1.6...
I'm using Windows XP SP2. Now the windows from my Java 1.6 application are grouped with the standard Sun icon [screen below] on the group.
http://img382.imageshack.us/img382/8995/iconbl1.png
I would like to change the icon for my own. Is there a way to do that ?
Please help.

Whichever icon I use for the main frame (I tried few), after grouping the main frame and other sub-frames the icon is changed to standard 'Java Sun' icon as you can see in the screenshot from my first post. The problem occurs only when frames are grouped, when the are separated in the task bar their titles and icons are ok...
So how can I change the icon/title for the group only (for Java 1.6 in Windows XP) ?

Changing availability Status for event in iCal

How do I change the availability status for an event in iCal Version 7.0 (1835.1)?

Hi bubbakwb3,
Thanks for visiting Apple Support Communities.
Use these steps to change availability status for an event in Calendar:
Calendar (Mavericks): Change your availability status for an event
http://support.apple.com/kb/PH14998
If the Calendar account you’re using displays your status for an event, you can change the status at any time and still be available to meet during an event.
By default, Calendar sets your status as free during all-day events and as busy during all other events.
Double-click the event, then click the event’s date.
Choose an option from the Show As menu.
Regards,
Jeremy

Create Tasks for target group.

Hi guys.
I want craete Tasks for target group.
But, I don`t see "Employee Responsible" in "Create Business Transactions for Target Group Members".
How can I set Employee Responsible for Tasks?
Thanks.
Sergey.

Hi Sergey,
What i observed while creating Task from TG is we dont have fileds from where we can assign Emp responsible, as in Task Partner detemination(Standard) Access sequence we use for Emp responsible is User, and when we create Task from TG sytem takes User's Id as a Emp reponsible i.e. using which user u r creating Task from TG.
Regards,
DD's

Enhance output of Target Group in segment builder

Hello Experts,
We are implementing SAP CRM Lean Marketing using CRM 7.0. Our business requirement is to do segmentation based on Company attributes and Relationship Category. The output of the target group should enlist the persons related to the Company based on the relationship category selected while doing the segmentation.
Using standard InfoSet CORM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, we are able to get the list of persons matching the segmentation query (based on the relationship category e.g. Has Supplier, Has Contact Person, etc) . But the issue is , the output of the target group (shown as an ALV grid , when the target group is opened in segment builder) only enlists matching Persons, it does not enlist the related company ID /name in front of the Person ID in the output of the target group. And this Company BP ID is not available if I try to modify the output layout. So business is unable to understand the Person enlisted in TG belongs to which Company. Can we enhance this ALV grid output of the target group displayed in segment builder ? if yes , how can it be achieved ? If this is possible and we are able to add related company BP ID/ name in front of every person enlisted in the target group then our issue gets resolved. Or is there any alternative solution to resolve this issue ?
Highly appreciate your early response in order to resolve this critical issue.
Thanks and Regards
Ambar
Edited by: AMBAR ADHAV on Sep 10, 2011 11:53 AM
Edited by: AMBAR ADHAV on Sep 10, 2011 2:22 PM

Hello Experts,
We tried implementing BADI CRM_MKTTG_SEG_MEM_EX in order to add Company ID/ Name , but the issue is the BADI gets Input as persons BP id, nothing else, due to this if a person is having relationships with multiple companies, the BADI is unable to identify which company to choose as Relationship Category is not available to the BADI. And further issue is if a Person is having same relationship category with 2 companies e.g. Supplier for company A and for Company B too , in this case too the BADI is unable identify correct Company to return to the target group output
Is there someting in the Infoset that can resolve our issue ? How can I make available the fields in the infoset to the ALV output of the target group. Using SQ02 I am able to add fields to the field groups for selection in segmentation, but can anyone guide, how to make the field available in the output list ?
Please provide your technical assistance
Thanks
Ambar

Tables for Target Group

Dear experts,
I have been looking for the table that stores the target group.
Could anyone please help?
thanks
Mehmet

CRMD_MKTTG_TG_H & CRMD_MKTTG_TG_T

Target Group creation & Segmentation

Hi Friends,
Can you tell me the use of the toggle buttons OR/AND WITHIN AN ATTRIBUTE / OR/AND ACROSS ALL ATTRIBUTES below the Attribute Lists in the Segment Builder.
I my Project there is a requirement where the Client wants to use OR & AND CONDITIONS while creating a Target Group.
Thank you,
Rajendran S

Hi Rajendra,
When you have more than one filter to create a target group then use these toggle buttons to set AND / OR conditions between filters of different attributes or different filters of same attribute.
OR/AND WITHIN AN ATTRIBUTE :
If you have two filters with in same attribute, select two filters and while drag and drop the condition you see in toggle button will be set between two filters.
Ex: If Toogle button is set to : OR WITHIN AN ATTRIBUTE
      Attribute : City
      filter1: Havana
      Filter2: Atlanta
select two filters and drag and drop to the work area, then an OR condition will be set between two filters
If Toogle button is set to : AND WITHIN AN ATTRIBUTE
Then the condition between two filters will be AND.
Similar functionality with other toggle button OR/AND ACROSS ALL ATTRIBUTES.
Thanks,
Priyanka

Retreiving the guid for target group selected for trade promotion in CRM 7

HI,
I am working on building API for creating trade promotion. I need to find a way where I could retreive the GUID of the target group to be assigned to the trade promotion.
Please share you thoughts on this. Let me know if we could use any standard function module or SAP class which could be used to achieve the objective.
Awaiting your replies.
Thanks

Check this function module
CRM_MKTTG_TG_H_GETLIST_OW

Can't create target group in graphical modeler

Hi,
I have a problem with the target group creation.
To create the target group I have done the following steps:
1. Go to Marketing -> segment;
2. Create Profile Set; save.
3. Go to Graphical Modeler;
4. Drag&Drop the attributes to the work area;
5. Select Count;
6. Select Build target group -> In Dialog;
7. Save target group;
8. Select u201CBacku201D to go to the Profile Set;
The system doesnu2019t do any error, but when I go to the profile set, in the block Target Groups doesnu2019t appear the target group that I have created.
If i go to the CRMD_MKTTG_TG_T CRM table, my target group is not create.
Can anyone help me, please.
Regards,
Brahmaji

HI
in gui u have to create target group in tcode crmd_mktseg create profile create target group and copy attribute list of existingif needed create filters and go for web ui create profile set and go for graphical modler and take ur attribute list and drag and drop u can split or rejoin merge target groups i think it is use full
abhinav

Change Commission-value for Commisson-Groups on item/BP-level

Hello,
at the moment it is possible to change the defined commission-% of an commisssion-group for specific items and BP. I was told by the support, that this is not the correct way according system definition and that's the reason why all this individually defined values are overwritten if we update for example BP.
We need this "wrong" behaviour, that allows us to change a commission groups %-value individually, because in our case for specific items or BP this value differs from the groups standard-value but we need to assign the commission-group to an BP for our commission reports.
Best regards,
Thomas

Hi,
According to your description, there are several list views in your list, there is a textbox control which holds the “Single Line of Text” type of data in your custom
form. When users click the “Add new item” button in one of the existing list views, you want the textbox control in the custom form to be populated automatically.
By default, when user clicks the “Add new item” button in a list view, the URL of the custom form page will contain the name of that list view page, thus, a workaround
which requires custom code can be like this:
After the form page loaded, we can extract the name of the list view page from the URL, then populate it into the textbox control immediately. This can be achieved
using jQuery.
About how to
get URL parameters of current page using jQuery:
http://www.jquerybyexample.net/2012/06/get-url-parameters-using-jquery.html
About
adding jQuery into InfoPath form:
http://riteshudupak.blogspot.com/2010/09/add-jquery-to-browser-enabled-infopath.html
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Change user status for WBS Elements

Hi All,
I am working on a workflow related to PS milestones.
When a milestone is achieved the user status has to be set for that WBS element and to all the WBS elements that are next to it.
I have tried to use the FM (ran FM independently as standalone), CJDW_INTEGRATED_USRSTAT_CHANGE with PROJECT NUMBER as input, but it throws an error NOT FOUND.
I have gone through the documentation of it also, which says that user has to prefil the structure PROJ before this FM is called, which i could not understand.
So can please anyone tell me, about the usage of this FM and how to run it so as to change the user status.
Thank you all in advance,
regards,
vijay

it is possible to have status with radio button and check box, by keeping status with status number and without status number.
But I doubt about your requirement whether it is possible in standard or not.
Please search SDN forums for some exit / BAdii which you can modify status profile.

Change payment status for COD order only

Hi,
I know that if I click on the edit button within any order, I can click a button to the right of the Status and a window pops up listing the status types. If I click on "Purchase - Awaiting Payment", I can make that the default status type however this would make it the default for all payments, not just COD payments which is what I'm after.
I wondered if anyone knows if there is a workaround so that "Purchase - Awaiting Payment" is the status type only for COD payments and "Purchase - Payment Received" is for all other payments?
Thanks

Ok thanks. It would be good if it was more specific because then you could create a report to see who has paid and who hasn't but maybe this is something for the future.

HT204406 Change of status for my music

Hi
Can someone tell me why the music I have been playing on our IMAC & ipod for years which we copied from our own CD's now has the icon Available for download against it, and when we last synced the ipod the music dissappeared and I only have the purchased music.? This is really annoying. Please dont tell me we have to click on each song to download what we already had available?
Thanks Ingrida

Your address and billing address for your credit card have to be in the US too. If they aren't, go to https://appleid.apple.com and manage your account to fix this. If you continue to have problems, contact iTunes store support: http://www.apple.com/emea/support/itunes/contact.html.

Change default status for program opening picture files

Adobe reader 8 is apparently set to have all my picture files (jpeg, bmb) that I click on - open up in Adobe. I do not want this program as default - I want another one, How do I change my default setting to another program??

Read this:
http://www.adobeforums.com/webx/.3bbc2da9

Changing archived status for target group or segmentation model.

Similar Messages

Maybe you are looking for