Changing default Display Settings
How can I change my default settings on the Display Performance? I want to change my default settings so that it always shows "High Quality Display."
You can change them for all new files by going to the Dispaly Performance section of the application prefs. Exixting docs can be changed from the View menu.
Similar Messages
-
Will migration assistant change the default display settings on my new Mac?
I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?
Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys. -
Hi
Does anyone know what the default display settings are for the T61. Some settings were "changed" when the device would not connect to a projector in a hotel. It will now not connect to any external monitor.
Thanks
PhilNative resolution on 13" MBP is 1280 x 800.
Open System Preferences > Display
There you will find a drop down list with different resolutions. Select 1280 x 800 -
How do I change iPad display settings?
Just got a new iPad2 -- can I change the display settings so that it doesn't time out so quickly? I would like it to stay active for several minutes before it goes to "sleep."
You're welcome. See the User Guide
-
To change "Default Report Settings"
Hello All,
In the interactive report, I am wondering to change “Default Report Settings”.
Thanks in advance,
EB NYMake sure you're logged into the builder as a developer, pick the columns you want, filters, ordering...etc. When you are done, click Save Report - developers have the option of saving default report settings.
Again you will only see this option if you are logged into the builder. -
Changing default cursor settings
Hi,
I need to change the default cursor settings on an xy graph. Currently the cursor positions itself at the beginning of each data set. See attached. You should be able to see the cursor displayed in bright yellow. How do I change the default conditions for displaying the cursor at the beginning of each data set from say: 04:19:38 PM, 09/28/12, (as in the attached example) to say: 04:19:38 PM, 09/28/11. I just changed the two digit year - to keep it simple! Thank you. John
Attachments:
Capture.PNG 25 KBHi John,
It sounds like you may not have your VI updating to show changes to controls when they are changed. I would recommend using an event structure in a while loop to poll for changes to the cursor and update them on the graph. I attached an example I wrote (opens in LabVIEW 2010 and more recent) to show you what I am talking about.
It is hard for me to understand what you are talking about with the small snippets of your code I am seeing. If you have further questions, please post an entire VI (or a smaller example VI that reproduces the issue) so it will be easier to help you.
Joey S.
Software Product Manager
National Instruments
Attachments:
cursor position property.vi 12 KB -
Changing default subscription settings
Hello all,
According to <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=37365">this SDN forum post</a> from 2005, it is not possible to change the default subscription settings.
With EP7, is this still the case? I can't find any documentation on doing this... so I'm hoping for the best, but prepared for the worst.
Thanks in advance,
FallonHello Pradeep,
When I display the 'subscribe' command in a layout set, the user can click it to subscribe to a folder. However, it uses the default subscription settings automatically when the user clicks that command. Then the command changes to "Edit Subscription" where the user can modify their subscription settings... but I'd like to be able to control what the default settings are that are taken on that first click.
Thanks for your reply,
Fallon -
Changing default printer settings in SAP Portal
Hi,
When i am trying to print the report in SAP Portal, the default page setting is A3 , i need to change it to 8.5 * 11 inches.
Is it possible??
Thanks
JancHi,
You can change the Page Settings in your Internet Explorer.
File --> Page Setup.
Try doing this.
Are you on BI 3.5 or 7.0?
Also, you are using the Query Designer or WAD ?
In WAD7.0 you can Export the Template with the Query and set the size as A4 or 8.5 x 11 inches.
While viewing the Query designer output also, you select the size. Default is A4. -
Change default display to external
How do I set my external display as my "default" display (so everything appears on it instead of the laptop's display)?
ThanksSystem Prefs>Monitors
There you have the two schematic monitors.
You can change the position of the monitors and grab the menu bar and drag it to the other monitor. -
How to change default browser settings?
Safari keeps crashing and I can't change the default browser settings. Is there a way?
I was able to fix the problem with the crashing by updating Safari.
-
Change Default Import Settings
This has bugged me for a while now. I have created an Import Preset to import my photos to my "F" drive. Works perfectly but sometimes...the import Preset reverts to the original Lightroom Import setting which imports to my "C".drive. If I right click on my Import Preset, my Import to "F" is checked.
How can I prevent LR4 from reverting to the default import settings and is there anyway to either remove the old default altogether or make my Import to "F", my default?
BobI found a previous post that appears to work. Since the netbook doesn't show an OK in the preference window, I just had to hit enter to accept and change the setting.
Thanks to all. -
I want to change the default print settings on Firefox 6.0.2 such that the headres, footers, etc. are not printed when I print a web page.
Firefox button > Print -> Page Setup
-
Change default print settings in PS
I was wondering if anyone knows how I could change the default print settings so that crop marks and labels are turned on by default. I've tried using automator, and making an action but haven't had any luck. Thanks.
Marcusanyone??
It would also be nice to have a default set of commands under print settings, like paper size, media type, color management, etc. -
Change default MIDI settings in Logic.
Hi there,
Just bought Yamaha DTXplorer digitals drums. When I record the MIDI part in Logic Pro 8, it doesn’t play the right notes concerning BD, SN and so on. Is it possible to change the default MIDI settings in Logic so it fit to the Yamaha DTX – or other applications?
Thanks for your help – KGL.There is not really any such thing as "default MIDI settings". Logic just gets the notes you play from your controller, and sends them to whatever other instruments you are using.
Does the DTX not use GM mapping? If not, I'd suggest you alter the notes it sends to be more suitable for your needs.
You can use Logic to remap notes in realtime (in a variety of ways, using environment transformers or mapped instruments) and this is the more flexible way of doing it, if you are comfortable with environment routing and so on. -
Change default program settings
How do I change the default program settings used to open a file? I accidentally attached adobe reader as the program to open a winmail dat file and now every time I go to open a winmail dat file adobe automatically tries to open it but can't. I have a program to open winmail files and want to use that as the default. Please help.
Hello, do a Get Info in the Finder on any winmail dat file, look fot the Open With, choose your APP, then click Change All button.
Maybe you are looking for
-
Voice memos do not consistently sync to itunes.
I have voice memos on my phone, dating back to 2010. In Itunes, I have "sync voice memos" checked, and it transfers songs randomly. I only have about a dozen memos on my computer, when there are about 100 on my phone. I've noticed that none of the me
-
Change Tax Classification in Sales Order
Hi all, I have a question about tax classification in sales order. I know that taxable or non taxable is determined by a variety of key (by material, order type, departing country & destination country, etc). I use Domestic Taxes as a key to determin
-
I have a 2 year old HP Pavilion Elite i7 Desktop w Windows 7 and I desire to add a 3 TB Hard Drive. Can I add a 3TB Hard Drive (probably the Segate Barracuda XT 3TB HD) as a secondary drive without changes. If not, what should I do? HP=Pavilion Sys
-
Steps to hookup my HP Officejet G85xi to Airport Express Base Station
felix, could you please provide me the steps to connect the above printer to the base station. currently i have the base station connected directly to a G5 iMac. however, i wish to use the printer from other computers in my house. thanks, Dave
-
Set Category for multiple IR's via Button in Taskbar
Hi! I have been searching the net for this for some time now, but wasn't successful, so maybe here is somebody who could help me. Hope I did select the correct forum for this thread... In SCSM 2012 - is it possible to set the category for multiple IR