Changing fonts in Safari

I use Earthlink web mail and the font changed to something I hate. How do I change the font to something more palatable. If I go into preferences the sytle sheet says "none selected." Any ideas? Thanks.

texteditor ---
Welcome to Apple Discussions!
I think you may have a font conflict.
Copy a section of the font you hate.
Then paste it into text editor.
What font does it say it is???

Similar Messages

  • How to change fonts in Safari 8.0?

    Hello, I have Yosemite and Safari 8.0 and cannot figure out how to change fonts in Safari and leave the fonts in other applications unchanged? And I don't care about the menus, but the content of web pages. Could someone please help me solve the problem?

    You don't without using custom css sheets. The web site developers specify the fonts to be used.

  • Changing fonts in Safari 6

    The font settings are gone from Safari's Preferences. How am I supposed to change the font?

    https://discussions.apple.com/message/19052289
    I have created three separate Style Sheets, named Calibri.css, Lucida Grande.css and Trebuchet.css.
    The code for all three style sheets appears below, separated by dashes -- create a new file in TextEdit, make it a TXT file (as opposed to a RTF file), select text from /* to } and copy and paste to your new text file, save it as *.css (* being the name you want to use). You can change the font to any you have installed.
    Then, simply go to Safari -> Preferences -> Advanced and choose which style sheet you want to apply. I have customised my Toolbar to show the small/large A/A to change font size. Perhaps some kind soul can add to the code below to force a fixed sized font.
    Alternatively, look for a Safari Extension called HelveticaTheWorld and force all pages to be displayed in Helvetica (the ugliest font ever invented).
    /* From Apple Discussion Board Suggestions */
    font-family: Calibri !important;
    body, p, b, i, u, h1, h1*, h2, h2*, h3, h3*, h4, h4*, h5, h5*, h6, h6* \[class\], \[span\], \[id\], \[style\] {
    font-family: Calibri !important;
    /* My custom defs */
    dl, dt, dd, ol, ul, li, td, input, * {
    font-family: Calibri !important;
    /* From Apple Discussion Board Suggestions */
    font-family: Lucida Grande !important;
    body, p, b, i, u, h1, h1*, h2, h2*, h3, h3*, h4, h4*, h5, h5*, h6, h6* \[class\], \[span\], \[id\], \[style\] {
    font-family: Lucida Grande !important;
    /* My custom defs */
    dl, dt, dd, ol, ul, li, td, input, * {
    font-family: Lucida Grande !important;
    /* From Apple Discussion Board Suggestions */
    font-family: Trebuchet MS !important;
    body, p, b, i, u, h1, h1*, h2, h2*, h3, h3*, h4, h4*, h5, h5*, h6, h6* \[class\], \[span\], \[id\], \[style\] {
    font-family: Trebuchet MS !important;
    /* My custom defs */
    dl, dt, dd, ol, ul, li, td, input, * {
    font-family: Trebuchet MS !important;

  • How do i change font in Safari 7.0.3

    I have changed my font so that whenever i open a PDF on safari the font changes automatically to one that i cant read. I want to change the font back to the safari default.

    Click Safari in the menu bar and select Preferences...
    In the Preferences pane click Advanced.
    The setting you want is Default encoding:
    I have mine set as Western (ISO Latin 1)

  • Can I no longer change fonts in Safari 6?

    I find no prefs in Safari for changing to my preferred font.  ???

    I wonder if it has anything to do with the Retina display for the new 15" MBP?  Safari 6 may have been optimized for the Retnia and somehow reduces the font size in our non-retina screens?
    FYI, I service web sites and I always noticed that the text was one size bigger in the browser versus what i would see in the html editor.  Now in Safari 6 it looks exactly like it does in the editor window.  Could it be that they are now showing a more accurate view of what web site developers are creating?
    Maybe they are ahead of the curve?

  • On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373

  • The font in Safari's bookmarks bar and tabs bar has suddenly changed

    The font in Safari's bookmarks bar and tabs bar has suddenly changed to a lighter font.  How do I change the font back?  I'm not speaking of the font size/type in the web browser in viewing web pages, but the font in the application itself has changed. It's rather annoying and would like to be able to change it back!  I'm running Safari v5.1.7

    OK, Margie, here's what to do . . .
    First Quit Safari.
    Then Find your User's (Home) folder library. 
    It's hidden, but here's how you find the Home Library:
    Click on the desktop to get the Finder menu.  Then go up to  "Go" in the menu bar, while holding down the option key.
    You'll now see the User Library in the drop down list. Open it, then look for the Fonts folder.
    Take the fonts folder to the desktop.
    Restart Safari.
    Any better?
    (Warning:  This is only for the Users/Home > Library > Fonts folder.  Under no circumstances, should this be done with the SYSTEM > Library > Fonts folder.) 

  • How to Change the FONT in Safari?

    Hi
    I'm using a Macbook and using the latest version of Safari in it.
    Of late, my fonts have changed. And even after changing them to my desired fonts (through Safari Preferences), I could not view the pages in Changed fonts.
    For Example, my gmail account was getting displayed in Verdana. And now, its in some obscure font - which is not chosen in preferences. This is not getting changed even after changes made to Preferences. Also, there is no change in the Text Encoding.
    I have tried the time tested method of removing Safari and reinstalling the same. Still, I'm facing the same problem.
    Someone please help.

    Hi and welcome to Apple Discussions....
    You may have duplicate or corrupted fonts.
    Follow the instructions here for help.
    Font problems and management in OS X
    Carolyn

  • Font in Safari got changed, how do i change it back?

    How do I revert to the original font in Safari.  It somehow got changed 2 OS's ago and I don't know how to change it back.  It's currently a very distracting font that is hard to read.

    Apple decided to trash that preference in their now basically useless iOSified Safari 6 incarnation. Now, you have to revert to using the Terminal to restore eminently useful preference settings.
    Ronald P. Regensburg wrote at MacInTouch:
    This works in Safari 6. You may need to empty caches (enable Develop menu in Safari 6—another useless change to previous behavior) to see the result and remove the css setting (to "nothing selected"). Font names with spaces need to be between quotation marks.
    Full example for proportional font:
    defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2StandardFontFamily 'Lucida Grande'
    defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2DefaultFontSize 14
    Full example for fixed width font:
    defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2FixedFontFamily Monaco
    defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2DefaultFixedFontSize 11

  • How do I change font size on the safari tool bar

    How do I change font size on the safari tool bar

    You can't in Safari.
    However you CAN with Firefox and the add-on called Theme Font & Size Changer, also include NoSquint and set a global web page zoom level a bit higher, say 150%.
    NoSquint has buttons on the tool bar to increase/decrease each websites size AND IT REMEMBERS IT!
    Under the Tools Menu > Customize you can add more toolbars as well, but they have to have something in it of course.
    (note: the green with yellow type is a person you can add from thousands of choices, it's not the default look of Firefox)
    So this setup, although it may appear large here compared to Safari, is fine on my 17" when sitting back about 3-4 feet, takes up about 1/6th of the screen, so I'm not hunched up close, and I have a lot of screen real estate to play with anyway.

  • Changed font in desktop and safari

    Hi, I found the following changes in the font in desktop. The font that is used for showing the size of volume, file or folder etc has gotten changed to something ugly.
    [IMG]http://i228.photobucket.com/albums/ee151/cosmac2007/th_Picture13.png[/IMG]
    also, some fonts on safari seem to have changed. Other users on my machine seem to have the leopard defaults. Where can i change the font to the default again?

    I validated all the fonts but still no change. I used font smoothing for sizes below 4 point and it improved visibility.
    http://i228.photobucket.com/albums/ee151/cosmac2007/Picture14.png
    I didn't check if this is same as other users display. I will mark your reply as helpful. Thanks.

  • How to change font size in Safari?

    Why is it when I set my fonts inside Safari to say, 18 for standard and 18 for fixed. It doesn't display that way. I keep getting the tiny font that I've always used.

    The font size you specify in the Preferences (18 for standard) will be used only if the font size is not specified by the web page. Nowadays most of webpages (including this Discussions) specify fonts and sizes to use in the CSS file, and the setting in the Preferences will be ignored.
    As andyBall writes, you can set the minimum size of fonts in Safari-Preferences-Advanced. But the results may not satisfy you (wrong line spacings etc.).
    In the same Preferences, you can specify your own CSS file, as explained in the following post by Tom Gewecke:
    Re: Setting default font size doesn't stick
    But here again, line spacings etc. are not adjusted correctly. To write a detailed personal CSS file by yourself is very tedious, if not impossible.
    As you might know, you can enlarge the fonts (and spacings) by hitting "command +" (press-hold the command key and hit the + key, or the = key; it seems you need not to press the shift key). I will be very pleased if someone tells me how to make this "enlarged" state the default.
    PowerMac G4   Mac OS X (10.4.8)  

  • Why can't we change fonts anymore?

    Why is Apple taking away our abilty to change the default font in Safari?  I have better looking fonts I can use.  This sort of stuff should be a configurable option.  I'm the user.  I know what I want best.
    Until Apple comes back to their senses, are there any plug-ins we can install that let us configure Fonts?  If not, I'm probably switching to Firefox or Chrome asap.

    You can. Go to the "Advanced" tab of the Preferences window, and under "Style Sheet" select a file that has the font spec you want in it. All you need is for the file to have something small in it, like this:
    body {
              font:  12px "Lucida Grande";

  • How do i change font size permantly and where do i find this?

    Where /how do i change font size permantly and where do I find this in the OS?

    debfrommidwest wrote:
    I have gone to view to increase but of course that is only long enough until I close page,
    ....I would like not to have to set my print each time I open computer.
    You will need the web browser Firefox installed
    http://download.mozilla.org/?product=firefox-6.0.2&os=osx&lang=en-US
    Next you will need to add the following addons
    Theme Font & Size Changer
    https://addons.mozilla.org/en-US/firefox/addon/theme-font-size-changer/
    NoSquint
    https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    Theme Font & Size Changer can adjust the size of the type Firefox uses in the toolbar area.
    NoSquint remembers per site web page zoom levels and you can set a minimum size for all web pages so any site you visit is made bigger automatically. Safari doesn't do this.
    You can see the difference between Firefox and Safari in this picture.
    Note: Firefox is highly customizable browser, and I added the green with the yellow type, you won't see that when you first start using it.
    It did that to match my desktop picture, grey is depresssing.

  • Some fonts in Safari not working

    After updating to Safari 3.1, I noticed that some fonts in Safari now display as Helvetica fractions. However, when I use Firefox to view the same Web page, they display fine. I am using Suitcase Fusion 12.1.6 and manage Local Fonts. Some of the local fonts do not appear in the preview pane and say they are missing. I have located them and tried to add them (repaired first, all fonts do not need repair) but Suitcase will crash each time I locate the font.
    Also, I noticed in Firefox that it is using the same fonts for the default set as Safari. Times & Courier. Yet these fonts aren't missing in Suitcase, so I am not sure what is happening here.

    I am using Suitcase Fusion 12.1.6
    12.1.7 is the current version. You should probably update.
    but Suitcase will crash each time I locate the font.
    Either the font is bad, or Suitcase's database is bad. That it tells you local fonts are missing points more towards a problem with Suitcase.
    To reset Suitcase, close the application. It will give you a minor warning about available fonts. Click Quit. If you are NOT using Suitcase's vault, in your user account, go to ~/Library/Application Support/Extensis/Suitcase/ and delete the file:
    Suitcase Font Database.suitcasevault
    In the Preferences folder of your user account, delete the file:
    com.extensis.SuitcaseFusion.plist
    Relaunch Suitcase. You will need to reset any preferences in the program that you have changed from the defaults. You will also lose any sets you've created.
    If you ARE using the vault, following the above steps will cause you to lose all fonts you've added to the vault. If you have backups of all of your fonts, this is no big deal. Otherwise, be forewarned that they will be gone. What you can do is move the database file to the desktop. Then if the problem with Suitcase continues, you've likely eliminated its database as the problem. Then you can quit the app again and move your original database back into the ~/Library/Application Support/Extensis/Suitcase/ folder.
    please tell me if I nuke my font caches, how will it affect Suitcase Fusion.
    It won't do anything to Suitcase. It doesn't even create them. For the most part, OS X builds your font cache files. If you remove them, the OS will rebuild them when you restart.

Maybe you are looking for

  • How to Migrate Sol 8/SDS 4.2 Raid 1 disks to Sol 10 VM

    I have a system running Solaris 8 with S/w mirrorring of the system & data disks that has to have the O/S upgraded to Solaris 10. Due to the size of a couple of system mount pts it looks like I'll have to do the Solaris 10 initial install option and

  • Sender File Adapter (FTP Protocol)

    Hi Every Body, I have a problem in using Sender File Adapter of (FTP Protocol Type) I have given all required settings to get connected to the FTP Server. When i give ( Source Directory and Exact File Name ex : MDMERP.xml) File gets picked up. But Wh

  • Super Secret File Hidden in My Trash!

    I'm running Leopard on my Macbook, and I just started to have this strange issue. I noticed it after I partitioned my drive with boot camp, and I suspect this has something to do with it. Whenever I throw things in the trash and empty it, the trash r

  • Can operations on volatile variables be reordered

    Hi everybody, I am reading "Java Threads 3rd edition"(Oreilly). The book covers J2SE1.5 so it must also cover thread programming in the new JMM. In chapter5 at "The effect of reodering statements", there is an example code as shown below. public int

  • Reading data files saved using FTP Append

    Hi All, The code posted will write me a data file using FTP Append, which represents the data coming from a cRIO chassis. However I do not seem to be able to write the code to pull the data back out of the saved files. I have success in retrieving an