Changing Host IP on OBIA servers

Hi,
We have the need to change the IP address on the servers that host our OBIA environments. For most environments, we can just do the following:
Stop all applications on the server.
Change the IP address at the O/S level. Restart server and/or network services.
In some situations, modify any application configurations where IP addresses are hard-coded. Most use hostname aliases and this step is often unnecessary.
Start all applications on the server.
Do you know if OBIA stores hard-coded IP address values in any of its configuration files or if there is anything tricky about changing the IP on an OBIA server?
Please let me know if you have successfully performed this change in a live environment or if your answer is more in theory.
Thanks, Dean

I am wondering the requirements for all components involved in OBIA. If the host IP changes, are there any configuration changes that need to be made within these components.
We are using Oracle Business Intelligence Applications (Finanacial Analytics 7.9.5). We currently have a small installation and have all components loaded on a single linux server (oc4j, DAC, OBIEE, Informatica - as well as DB).
Thanks in advance,
Dean

Similar Messages

  • How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

    Hi
    I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
    Thanks in advance!!!
    Sincerely yours
    Sergey Bondarenko

    Hi
    Thanks for your attention for my humble problem.
    I have performed Meeting Place Express configuration through the “net” command.
    But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
    Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of  cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
    Have you any idea?
    A lot of thanks in advance!!
    Sincerely yours Sergey Bondarenko
    Here I have printed the net configuration output of Cisco meeting Place Express:
    [root@cumpxvoice root]# net
    This is the MeetingPlace Express network configuration utility.
    Up to the point where you save changes, it is safe to hit ^C to get
    out at any time, in which case nothing will have changed.
    1) List current configuration
    2) Configure Ethernet port 1
    3) Configure Ethernet port 2
    4) Configure service bindings
    5) Set host names
    6) Set domain name
    7) Configure DNS service
    8) Configure NTP service
    9) Configure routing
    10) Done
    Select: 1
    Primary/audio host name: cumpxvoice
    HTTP host name:          cumpxvoice
    RTMP host name:          cumpxweb
    Domain name:             uclab.com
    Service bindings:
    Audio:                   port 1 (eth0)
    Web browsing (HTTP):     port 1 (eth0)
    Web conferencing (RTMP): port 2 (eth1)
    Port 1 (device eth0):
    IP Address:      10.62.60.116
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Port 2 (device eth1):
    IP Address:      10.62.60.117
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Static routes:
    Destination      Gateway          Network mask     Port
    0.0.0.0          10.62.60.1       0.0.0.0          1
    DNS Servers:
    10.62.60.115
    10.0.1.4

  • How to change host name or host ip in AIA after installation

    Hi,
    we have AIA11.1.1.5.0 and O2C PIP installed.
    we need to change host name used in AIA to some different value.
    Could you please suggest what all steps are required for this.
    Thanks & Regards,
    Bob

    1) Make a full backup of your XI 3.1 system (both database and file repository)
    2) Change the hostname
    3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
    4) Run the "Update objects" command in the CCM on the new SIA
    5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
    6) Remove the old SIA in the CCM
    7) Go into to the CMC and try to delete any remaining servers from the old SIA.
    Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
    Regards,
    Stratos

  • How to configure one TREX host with multiple index servers ?

    Hi All,
    Does anyone know how to configure TREX on the one host,
    with multiple index servers ?
    Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
    our KM content for portal users.
    I am using TREX 7 and have not been able to do this,
    despite reading the Single and Distributed install
    documentation.
    Any help would be appreciated.
    Regards,
    Andres

    Hi Andres,
    To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
    Proceed like this:
    1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
    2. In TREXdeamon.ini go to
    [daemon]
    references sections below
    programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
    and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
    3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
    Go to the last two columns and move the indexes (move master here/secondary mouse click)
    If you don't distribute the indexes the new index server process will be regarded when an new index is created.
    Hope this helps!
    cheers
    Bettina

  • HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

    i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

    As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
    [Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
    Also take a look  at this SDN thread, you might find something interesting.
    [click here for SDN thread|How to change the hostname was set/defined in SAP system?;
    Edited by: santra.anirban on Sep 13, 2010 10:45 AM

  • How to change host name for SLD

    Hi All,
    How is possible to change host name of SLD configuration?
    I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
    How can i do it?
    Thanks a lot!
    Alex

    Hi,
    you can change it in System Landscape directory.
    Go to the http:yourportal.com:50000/sld
    then click on the Landscape and update the new host name.
    Raghu

  • How to change host name for management agent.

    Hi,
    I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
    I know how to change port number, but I've no idea how to change host name.
    Have you got any idea?
    Thank you in advance.
    Matin

    Hi,
    you can change it in System Landscape directory.
    Go to the http:yourportal.com:50000/sld
    then click on the Landscape and update the new host name.
    Raghu

  • Changing Host Name in OCS 10.1.2

    I have Installed OCS 10.1.2 on RedHat Linux AS 4.5 (x86) on HP-Proliant DL 180 G5 Server.
    I want to configure Apache Server in OCS to launch a web site.
    Can anybody guide me with the Apache Configuration,
    I have tried but as my site name and Host Name are same i am unable to do it -
    Is it possible to change the HOSTNAME on OCS ?
    Some guidence on this issue will help me to proceed else i will have to re-install OCS.

    Do changing host name effect in google PR update ?

  • Changing HOST Name in Oracle 10G AS

    Hi,
    I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM
    Machine is UTI ...Every Thing is Working Fine ..... After the Successful Installation of 10G AS Suddenly i got requirement to the Change host (UTI to UTTI)
    so i have changed the host Name to UTTI after that Oracle 10G AS is not Working , i know that every thing is registered with host name as UTI
    is it any possible Solution to make it Working Fine
    Any Advice on this .
    Thanks for Your Valuable Information
    SHAN

    user609980 wrote:
    I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM Good question. One that is appropriate for the App Server forums, not the Database forums.
    And answered in the docs.
    Which docs? Well, that depends on the VERSION of the app server. Not the BRAND as you specified. (Assuming 10g R2, 10.1.2.x, you would look under App Server 10g R2 docs at http://tahiti.oracle.com, click on the System Management tab, and look at Chapter 8 of the "Oracle Application Server >> Administrator's Guide"

  • MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

    i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

    Hi,
    Do not change the hostname after the installation, if you need to then you have to perform system copy.
    Refer: Note 8307 - Changing host name on R/3 host: What do you do?
    Regards,
    SBK

  • RDS 2012 - using Virtulization Host role on HyperV Servers hosting VMs

    I have an existing RDS2012 farm which is working great with Session Hosted Desktops.
    I'm looking to evaluate pooled Windows 8.1 desktops and know I need to run these on HyperV servers with the RDS Virtualization host role installed.
    I have an existing production HyperV cluster for servers and am wondering if i should use this for the Windows 8.1 VMs and if so, do i need to install the virtualization host role on all servers in this cluster.
    Or would it be best practise to dedicate a HyperV server/cluster purely for hosting the RDS Win8 client VM's (and keeping the virtualization host role off the production HyperV cluster)?
    Thanks.

    Virtual Desktops have different performance and capacity requirements than typical server workloads.  It is recommended to visualize desktops on hyper-visors dedicated to desktops only.  For capacity planning for virtual desktops on Hyper V, refer
    to this document -> http://download.microsoft.com/download/2/4/B/24B5EC7D-1D03-49A2-B792-C7EDF24549EE/Windows_Server_2012_Capacity_Planning_for_VDI_White_Paper.pdf
    HTH,
    JB

  • How do I change DNS to Business Catalyst servers.  I am having problems can anyone help please?

    How do I change DNS to Business Catalyst servers.  I am having problems can anyone help please?

    What problem are you having?
    Have you read this KB? - Domain name and DNS: Quick reference

  • How to changing host name

    how do i changing host name after install. it never asked me for one and now its stuck on unknown.

    Recent forum threads have started like this one,
    then got completely out-of-focus and derailed.
    e.g.
    http://forum.sun.com/jive/thread.jspa?threadID=106335 from Sept '06,
    which references a thread from Aug '06, with 80+ replies inside it ...
    http://forum.sun.com/jive/thread.jspa?threadID=105923
    Your Ethernet connection and your system hostname are not going to work,
    if you don't have a compatible network adapter.
    You won't connect to anything, and the OS can't associate its FQDN,
    without hardware that works.
    Have you reviewed the HCL, and compared it with your hardware?
    http://www.sun.com/bigadmin/hcl/
    You may need to install 3rd party drivers for the NIC,
    or you may need to buy a replacement card that is compatible.
    Boot the system. From a terminal window, as root user, do ...
    # ifconfig -a <enter>
    Does the output from that command list anything in addition to the virtual loopback adapter?
    Copy and paste the complete output back here into the forum thread,
    so that others can see what you are seeing.
    If the loopback LO0 is all you have, then you're going to have to fix that
    before going any further in this discussion.

  • Trying to change host computers for my iphone 4s.

    Currently, I'm trying to change host computers from my Laptop to my desktop. I want to erase everything on my iphone and update it with everything on my current Itunes on my desktop. Should I just factory reset and then reload everything from icloud and set the new host to my desktop? Or is there possibly better/safer way to do this.

    I just have to ask, what word could possibly fit in the "****"? I'm no SCRABBLE genius. And please pass the expire cues to someone else when you get a chance.
    She threw the phone when she was **** at her man.

  • I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

    I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

    There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

Maybe you are looking for

  • Unable to see T60 on my network

    I see others have reported a similar problem but none of the remedies work for me. I have a T60 and a Z61t.  Initially, neither one could be seen on my network but they could see the other PCs. On the Z61t, turning off the Network Security settings i

  • Calendar Host doesn't show up in WGM

    When I edit the advanced settings for a user in WGM, I can't choose a host in the 'Enable Calendaring' drop-down, as it says "No Calendar Host Selected". I configured iCal Service in SA such that "Host name" is the servers host.domain.com name I have

  • Scheduled report failing with "Incorrect log on parameters"

    I am having trouble with a report scheduled on our Crystal Enterprise Server.  I didn't design this report but am responsible for supporting the server, so I am trying to determine if this is a server issue or not.  The user who designs these reports

  • ITunes for windows 7 x64

    To Whom it May Concern: I have a Dell Studio XPS 13, and I'm running windows 7 home premium on it. I've downloaded thne uninstalled iTunes about 5 different times trying to get it to work. I open iTunes and it says it is opening in compatibility mode

  • When mouse hits upple left corner of screen, windows disappear

    The upper lefthand corner on my Macbook Pro is hot. When the mouse pointer hits the corner, the active windows on my screen collapse off the desktop. When I hit the same corner again, the windows reappear. Is there a setting in System Preferences whi