Changing Internal & External URLs?

We run split DNS so right now for all services the internal and external Exchange 2010 URLs are simply set to mail.domain1.com.
If I change them to mail.domain2.net, assuming there is a valid cert on the Exchange box for mail.domain2.net, and assuming that split DNS points mail.domain2.net to the internal/external IP of the Exchange box, new clients should pick up the new domain.
What happens to existing clients i.e. Outlook and ActiveSync?
Will they continue to use mail.domain1.com until the account is removed and added again, or do they do a periodic refresh/update/poll of which setting to use?
In particular would the URL used by Outlook Anywhere be updated on the client automatically?
This topic first appeared in the Spiceworks Community

Hi,
For the migration from the Exchange 2007 to Exchange 2013, we need change the external URLs with the new Exchange 2007 host name legacy.domain.com and migrate all mailboxes including public folders.
For more information about the migration, you can refer to the following articles:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-3-step-by-step-exchange-2007-to-2013-migration.aspx
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-4-step-by-step-exchange-2007-to-2013-migration.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Exchange 2010 - Virtual Directory Internal & External URL's with Wildcard Cert

Hi Guys
I am trying to determine if my Exchange 2010 server Virtual Directory URL's are setup according to best practice. I'm sure anyone with good Exchange experience will instantly be able to tell me if my Virtual Directory DNS is correct or could cause issues.
Scenario:
Hosted Exchange 2010 SP1. Multiple client mail domains hosted
2x CA, 2x HT, 2x MB, 2x DC
Wildcard *.example.co.za certificate being used on CA servers
AD domain is he.example.za.net
CA Server naming example: ca1.he.example.za.net, ca2.he.example.za.net
he.example.net DNS is done by DC servers
External name used by clients: outlook.example.co.za (For Outlook setup and OWA access)
outlook.example.co.za has two A records pointing to the CA IP's
PROBLEM/CONCERN:
We have a random OWA log out issue that we believe might be due to ambiguous DNS names being used.
If I change the Virtual Directories External URL to be the FQDN of the server, we get a Certificate Error in clients (due to the .co.za Wildcard). The external URL clients use
must be on .co.za.
So are the Virtual Directory URL's causing the CA servers to loose track of who is authenticated in where (leading to OWA disconnection)? Is it fine to load balance the CA servers with the DNS the way we are doing currently? Any other issues you see?
Current Virtual Directory settings:
Note that they are identical on CA1 and CA2
[PS] C:>Get-OabVirtualDirectory -server ca2 |fl *url
InternalUrl : https://outlook.example.co.za/OAB
ExternalUrl : https://outlook.example.co.za/OAB
[PS] C:>Get-WebServicesVirtualDirectory -Server ca2 |fl *url
InternalNLBBypassUrl : https://ca2.he.example.za.net/ews/exchange.asmx
InternalUrl          : https://outlook.example.co.za/ews/Exchange.asmx
ExternalUrl          : https://outlook.example.co.za/ews/Exchange.asmx
[PS] C:>Get-ActiveSyncVirtualDirectory -Server ca2 |fl *url
MobileClientCertificateAuthorityURL :
InternalUrl                         : https://outlook.example.co.za/Microsoft-Server-ActiveSync
ExternalUrl                         : https://outlook.example.co.za/Microsoft-Server-ActiveSync
[PS] C:>Get-EcpVirtualDirectory -Server ca2 |fl *url
InternalUrl : https://ca2.he.example.za.net/ecp
ExternalUrl : https://outlook.example.co.za/ecp
[PS] C:>Get-OwaVirtualDirectory -Server ca2 |fl *url
Url             : {}
Exchange2003Url :
FailbackUrl     :
InternalUrl     : https://ca2.he.example.za.net/owa
ExternalUrl     : https://outlook.example.co.za/owa
[PS] C:>Get-AutodiscoverVirtualDirectory |fl *url, server
InternalUrl :
ExternalUrl :
Server      : CA1
InternalUrl : https://outlook.example.co.za/
ExternalUrl : https://outlook.example.co.za/
Server      : CA2
REALLY APPRECIATE SOME EXPERT ADVISE. Thanks.

Hi Kane,
Why did not you use cas array to load balance client connectivity?
If you create a CAS array, you can assign an virtual IP (VIP) for the CAS array FQDN (e.g CASarray.example.za.net), and then point all the Virtual Directories internal URL to CAS array fqdn;
For external, you can point outlook.example.co.za to VIP which had been assigned to CAS array.
I recommend you refer to the following article to understand CAS array:
http://technet.microsoft.com/en-us/library/ee332317(v=exchg.141).aspx#CASarray
http://blogs.technet.com/b/ucedsg/archive/2009/12/06/how-to-setup-an-exchange-2010-cas-array-to-load-balance-mapi.aspx
http://blogs.technet.com/b/exchange/archive/2012/03/23/demystifying-the-cas-array-object-part-1.aspx
Best regards,
Niko Cheng
TechNet Community Support

Providing external url for the fqdn for webfeed returns error in eventlog that shows internal url is being used - how to change to the external url?

I've got my Rdweb accessible on both my internal and external network by using split dns locally to resolve the external url (remote.domain.com/rdweb) to resolve and everything works fine. However users don't want to use the rdweb interface (as it is slower
than just clicking on a rdp shortcut.
Following the notes at http://social.technet.microsoft.com/wiki/contents/articles/14488.distribution-of-remote-apps-and-desktops-in-windows-server-2012.aspx - I've tried to set up the webfeed on a Win7+ machine but when I enter the external url that
is protected by an SSL cert the eventlog shows that the internal address is being used and it doesn't match the certificate. - "There is a problem with this connection's security certificate.
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept data you send to the remote computer.
Windows cannot continue setting up this connection. Contact your workplace administrator for assistance.
Connection name:
Connection URL: https://internalservername/rdweb/feed/webfeed.aspx
How do I set the servers to use the external address rather than the internal one - i'm assuming it's similar to exchange's
Set-webservicesvirtualdirectory command but I can't find the equivalent command documented anywhere.
http://absoblogginlutely.net

Hi,
Thank you for posting in Windows Server Forum.
Please check below mention point.
• Create a relevant DNS entry in the mentioned zone to point to the RDS environment’s internal IP address
• Create a relevant DNS entry in external DNS to point to the firewall which is publishing RDS’s external IP address
• You can use the below mention script to change the FQDN of the RDP files provided by RD Web Access / RemoteApp and Desktop connection feed.
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
In addition please check below mention thread.
How do I change the URL to the Remote Web Access server in Windows Server 2012?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/67dfab70-7e10-4e0b-a3c8-63ce776f2355/how-do-i-change-the-url-to-the-remote-web-access-server-in-windows-server-2012?forum=winserverTS
Apart from this, also check the settings under; IIS in RDWeb Server as per below mention path.
Expand the default Website >Pages >Application Settings >DefaultTSGateway >
Enter the external address (FQDN) of the RD Gateway in the Value Field.
Hope it helps!
Thanks,
Dharmesh

Changing Internal URL's to match External URL's for .local support ending.. Issue?

Our AD domain is a .local domain.. We are renewing our cert and want to ditch the .local names in the cert since they are
not going to be supported in a year..
We got a new cert without the local server names which include the .local..
I then changed all the internal url's to match the external url's in Exchange 2010 (OWA, ECP, Active-Sync, Autodiscover, OAB)..
However, now all our existing Outlook clients are receiving cert errors.. If we blow away their profile and recreate it they
work fine.. It appears the clients are using the old SCP name until they are reconfigured and then they use the new one..
Did I miss a step somewhere?
Thanks

Nice, and that name will on the certificate - correct?
Are all the other URLs updated for:
OAB
EWS
ECP
OWA
EAS
and there is no more .local anywhere in the URL config?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Unable to activate internal and external urls at the same time

Hi,
We have Configured EBS R12 in DMZ setup as described in Figure F-9 of metalink note 380490.1 ,Option 2.4: Using Reverse Proxy with no External Web Tier.
refering to 726953.1 Case History: Implementing a Reverse Proxy Alone in the DMZ Configuration - R12.
but Not able to activate internal and external urls at the same time in this configuration. Only the node where last autoconfig was run getting activated as web node.
When trying to accees the url of the other node it gets redirected to the url (where autoconfig is last run).and for this error observed is Error Code:502 Proxy Error.The specified Secure Sockets Layer (SSL) port is not allowed.(12204).
For both external and internal services are UP.opmn status is live no error.
Using Apache as reverse proxy.
EXTERNAL Reverse proxy settings:
s_login_page http://LONWEB01.process.com:81/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">NO</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">NO</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">NO</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
INTERNAL Middle Tier settings:
s_login_page http://stprojapp01.test.com:8005/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
Are we missing anything....
Thanks & Regards

Hi,
Finally it's resolved...Following is the solution thought to share in the forum:
The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
to SERVRESP.
To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
shown below:
sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
It's resolved after doing this..

Change external urls on existing deployment without user interruption

We've got a client who changed its Company Name just after the migration of 2010 => 2013.
All mailboxes are moved to 2013. Now we need to change their external/internal urls without user interruption...
Current config:
2 x Windows 2012 R2 + Exchange 2013 RU7 => 1 DAG => 2 databases (primary & archive)
External urls:
activesync.currentcompany.be
autodiscover.currentcompany.be
Internal urls:
Exchange2013.currentcompany.be
DNS records:
autodiscover SRV record for newcompanyname.be
Accounts:
[email protected]
New config:
Same servers
External urls:
activesync.newcompanyname.be
Internal urls:
exchange2013.newcompanyname.be
What is the best practice for this?

Hi,
If the domain name is changed, please check the email address policy for all domain users. If all users are using the new domain, the old domain would never be used and all DNS records have been changed to new domain, we can run the following commands to
change the URLs:
Set-ClientAccessServer -Identity CAS2013 -AutodiscoverServiceInternalUri https://exchange2013.newcompanyname.be/autodiscover/autodiscover.xml
Set-WebServicesVirtualDirectory -Identity "CAS2013\EWS (Default Web Site)" -InternalUrl https://exchange2013.newcompanyname.be/ews/exchange.asmx -ExternalUrl https://activesync.newcompanyname.be/ews/exchange.asmx
Set-OABVirtualDirectory -Identity "CAS2013\oab (Default Web Site)" -InternalUrl https://exchange2013.newcompanyname.be/oab -ExternalUrl https://activesync.newcompanyname.be/oab
Set-OwaVirtualDirectory -Identity "CAS2013\OWA (Default Web Site)" -ExternalUrl https://activesync.newcompanyname.be/owa
-InternalUrl https://exchange2013.newcompanyname.be/owa
Set-EcpVirtualDirectory -Identity "CAS2013\ecp (Default Web Site)" -ExternalUrl https://activesync.newcompanyname.be/ecp
-InternalUrl https://exchange2013.newcompanyname.be/ecp
Set-ActiveSyncVirtualDirectory -Identity “CAS2013\Microsoft-Server-ActiveSync (Default Web Site)” -ExternalUrl https://activesync.newcompanyname.be/Microsoft-Server-ActiveSync
-InternalUrl https://exchange2013.newcompanyname.be/Microsoft-Server-ActiveSync
Additionally, please create a new trusted certificate with the following namespaces:
activesync.newcompanyname.be，autodiscover.newcompanyname.be，Exchange2013.newcompanyname.be
Assign the certificate with IIS service.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

External portal capturing internal portal URL in Log and trace file

Hi,
We are facing one issue in portal like we have two portals for internal (Intranet) and external (Internet) users.
Once users logged in the application and try to get the information about mylink from the external portal link (internet) they should not get any information about the internal portal.
But in log and trace file we can see the external portal link capturing the internal portal URL.
We need to find, from where system capturing the internal portal URL.
Thanks.

The tkproffed trace file is in seconds.
"set timing" is in hh:mi:ss.uu format. So 00:00:01.01 is 1.01 seconds.
You have to remember that most of these measurements are rounded. While your trace file says it contains one second of trace data, you know it's more.
One excellent resource for trace files is "Optimizing Oracle Performance" by Cary Millsap & Jeff Holt. (http://www.amazon.com/Optimizing-Oracle-Performance-Cary-Millsap/dp/059600527X ) I thought I knew trace files before, but this book brings your knowledge to a whole new level.
There is also an excellent WP by Cary Millsap ( http://method-r.com/downloads/doc_details/10-for-developers-making-friends-with-the-oracle-database-cary-millsap ) that gives you some insight.

Exchange 2010 and 2013 coexistence Internal and external URL

Hi all,
been reading alot of threads about Outlook anywhere and virtual directories in co-existence exchange 2010 and 2013.
Still i dont get any smarter.
Here is scenario:
Exchange 2010
Cas1
Cas2
Mailbox1
Mailbox2
Casarray is Exchange.casarray,com ( internal dns pointed to CAS1 in exchange 2010).Seems like by default both exchange 2013 cas servers are added to the casarray.
Exchange 2013
CAS+Mailbox
Cas+Mailbox
DNS
mail.exchange.com pointing to VIP (kemp loadbalancer)
Autodiscover ( pointed to same vip ,kemp load balancer)
Outlook anywhere on all servers (2010 and 2013)
Internal ( pointing to VIP on Kemp)
External ( pointing to external IP,then it passes firewall that again passes to kemp)
Problem we are having is when migrating users from Exchange 2010 - 2013.
Users using Outlook 2010
restart of outlook and mail works fine.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Users using Outlook 2013
Outlook in disconnected status,only fix is to create new profile.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Question is,what should be set for internal and external url (active sync,owa,ews)on 2010 and 2013 servers?
Where is the config wrong?
Thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi Martina,
did the test as mentioned,even tried both CAS 2013 servers.Flush and registerdns didnt help.
Still Outlook is Connected to the cas.exchange.as (which again Points to 1 of Exchange 2010 servers),
Tried repair Outlook profile,no og.Only fix is to setup New account.
Any more tips?
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Accessing External Url using Http Utility | Error when using from Weblogic on Solaris

We are using Http Utility (http://jakarta.apache.org/commons/httpclient/) from
Apache for accessing external URL. A XML string is sent as POST parameter to the
URL and the response is also an XML string. The URL is accessed over HTTPS protocol.
I am setting the following parameters in the java class:
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
// set the property
System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
The java class written to access the external URL using Http Utility works perfectly
fine when it is run from either the command line (of Windows or Solaris using
main() ) or from weblogic on windows. The same java class throws an exception
when run from Solaris instance of Weblogic
2003-09-30 11:02:12,411 FATAL [com.bp.beyondbp.presentation.userregistration.action.LloydsValidator]
EXCEPTION: com.bp.beyondbp.presentation.userregistration.exception.LlyodsValidationFailedException,
MESSAGE: Write Channel Closed, possible SSL handshaking or trust failure;
CAUSE: (java.io.IOException: Write Channel Closed, possible SSL handshaking or
trust failure)
at com.bp.beyondbp.presentation.userregistration.action.LloydsValidator.postXMLtoLloyd(LloydsValidator.java:243)
at com.bp.beyondbp.presentation.userregistration.action.LloydsValidator.validateLlyodsForNewUser(LloydsValidator.java:95)
at com.bp.beyondbp.presentation.userregistration.action.PreferencesActionForm.validate(PreferencesActionForm.java:326)
at org.apache.struts.action.RequestProcessor.processValidate(RequestProcessor.java:942)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:255)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
java.io.IOException: Write Channel Closed, possible SSL handshaking or trust failure
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown
Source)
at com.certicom.tls.record.ReadHandler.interpretContent(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at org.apache.commons.httpclient.HttpConnection$WrappedOutputStream.write(HttpConnection.java:1344)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:67)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:125)
at org.apache.commons.httpclient.HttpConnection.flushRequestOutputStream(HttpConnection.java:779)
at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2179)
at org.apache.commons.httpclient.HttpMethodBase.processRequest(HttpMethodBase.java:2534)
I tried to debug the problem by looking at system properties on windows and solaris,
the difference that I found was
On Windows
[exec] tModelInstanceInfo_description : com.sun.net.ssl.internal.www.protocol
On Solaris
[exec] tModelInstanceInfo_description : weblogic.utils|weblogic.tils|weblogic.net|weblogic.management
After this I changed the startWLS.sh on Solaris and set
-Djava.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol in java options.
On looking the system properties again, the output was
[exec] tModelInstanceInfo_description : com.sun.net.ssl.internal.www.protocol|weblogic.utils|weblogic.utils|weblogic.net|weblogic.management
But still the error is same. Can somebody help me out here as to what is going
wrong? Please find the java class attached for reference, please have a look at
postXMLtoLloyd() method in the class file..
[LloydsValidator.java]

We are using Http Utility (http://jakarta.apache.org/commons/httpclient/) from
Apache for accessing external URL. A XML string is sent as POST parameter to the
URL and the response is also an XML string. The URL is accessed over HTTPS protocol.
I am setting the following parameters in the java class:
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
// set the property
System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
The java class written to access the external URL using Http Utility works perfectly
fine when it is run from either the command line (of Windows or Solaris using
main() ) or from weblogic on windows. The same java class throws an exception
when run from Solaris instance of Weblogic
2003-09-30 11:02:12,411 FATAL [com.bp.beyondbp.presentation.userregistration.action.LloydsValidator]
EXCEPTION: com.bp.beyondbp.presentation.userregistration.exception.LlyodsValidationFailedException,
MESSAGE: Write Channel Closed, possible SSL handshaking or trust failure;
CAUSE: (java.io.IOException: Write Channel Closed, possible SSL handshaking or
trust failure)
at com.bp.beyondbp.presentation.userregistration.action.LloydsValidator.postXMLtoLloyd(LloydsValidator.java:243)
at com.bp.beyondbp.presentation.userregistration.action.LloydsValidator.validateLlyodsForNewUser(LloydsValidator.java:95)
at com.bp.beyondbp.presentation.userregistration.action.PreferencesActionForm.validate(PreferencesActionForm.java:326)
at org.apache.struts.action.RequestProcessor.processValidate(RequestProcessor.java:942)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:255)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
java.io.IOException: Write Channel Closed, possible SSL handshaking or trust failure
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown
Source)
at com.certicom.tls.record.ReadHandler.interpretContent(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at org.apache.commons.httpclient.HttpConnection$WrappedOutputStream.write(HttpConnection.java:1344)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:67)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:125)
at org.apache.commons.httpclient.HttpConnection.flushRequestOutputStream(HttpConnection.java:779)
at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2179)
at org.apache.commons.httpclient.HttpMethodBase.processRequest(HttpMethodBase.java:2534)
I tried to debug the problem by looking at system properties on windows and solaris,
the difference that I found was
On Windows
[exec] tModelInstanceInfo_description : com.sun.net.ssl.internal.www.protocol
On Solaris
[exec] tModelInstanceInfo_description : weblogic.utils|weblogic.tils|weblogic.net|weblogic.management
After this I changed the startWLS.sh on Solaris and set
-Djava.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol in java options.
On looking the system properties again, the output was
[exec] tModelInstanceInfo_description : com.sun.net.ssl.internal.www.protocol|weblogic.utils|weblogic.utils|weblogic.net|weblogic.management
But still the error is same. Can somebody help me out here as to what is going
wrong? Please find the java class attached for reference, please have a look at
postXMLtoLloyd() method in the class file..
[LloydsValidator.java]

ICE is there a way to allow my client to make External URLs open in new tabs?

Hi.
I have a set my client's site up with lots of editable regions so they can manage content. Although the InContext editor is great for letting my client link to internal pages, documents and external pages I couldn't find where they would select the external URL to open in a new browser tab. Obviously I can go back in and add the html to their links but is there a way they can set the target?
Cheers
David

The sessionstore.js file only exists while Firefox is closed. During shutdown, Firefox writes out that file based (I think) on recovery.js as of that point. When Firefox starts back up again, it reads sessionstore.js and deletes it. So if Firefox is running, it's normal not to see sessionstore.js. Anyway, sessionstore.js is going to be empty now.
Shadow Explorer might already have done this for you, but just in case...
You could try the previous versions feature. This is harder to get to on Windows 8 and 8.1, but I have read about a roundabout way. I can't test this myself, but here's what you do:
Let's say you have a Windows Explorer window open to your current Firefox profile folder. This is something like (with your username and semi-random profile folder name):
C:\Users\''username''\AppData\Roaming\Mozilla\Firefox\Profiles\blahblah
Click in the address bar and change the C: to
\\localhost\c$
to yield (with your username and semi-random profile folder name)
\\localhost\c$\Users\''username''\AppData\Roaming\Mozilla\Firefox\Profiles\blahblah
Press Enter to reload the folder contents that way.
Now when you right-click recovery.js, recovery.bak, backup.js or sessionstore.js and choose Properties, there should be a Previous Versions tab. Usually the most recent previous version dates back to the last time Windows created a restore point (e.g., system update or possibly scheduled on a more frequent basis).

Changing Exchange OWA URL, and MX record

Hi all,
We are planning to change our Exchange OWA URL from "https://webmail.saigon.com" to "https://webmail.city.saigon.com"
My question is Do I need to do anything to the MX record? The Exchange server name and IP remain the same. Only the URL get changed for the internal, and external.
Thanks

Hi Brichardi,
Thank you for your question.
If we want to change Exchange OWA URL from https://webmail.saigon.com into https://webmail.city.saigon.com for internal and external, we must modify the following items:
1. MX record
We could ask to our ISP for help.
2. Exchange certificates
We could remove the old exchange certificate and resign a new certificate for Exchange server.
3. Re-configure virtual directory URL (OWA,OAB,ECP.EWS,ActiveSync,Autodiscover)
We could refer to the following link:
https://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Navigate to external URL from secured APEX server

NOTE I am using the internal Oracle APEX server to host my application, so it may be possible that you will have to be an Oracle employee with the same access, or using a similar setup, in order to respond. Even if you are not, if you feel inclined to "take a swing" at it, keep this in mind.
Hi all,
I am using the internal APEX server at oracle to host an application (Application Express 4.0.2.00.07). I have other, NON-APEX applications hosted on other servers within the Oracle firewall.
On page 0 of the APEX application (which, as you may know, usually displays as the "header" section of every other page in the application) I have created a select list of the other projects and their associated URLs as well as a "Go" button, so users that want to navigate to the other applications can do so from this application. Since page 0 does not seem to allow the creation of standard branch items (please correct me otherwise), I have created a process on that page triggered by the "Go" button. The process currently contains the following code:
begin
apex_application.g_unrecoverable_error := true;
htp.p('<script language="JavaScript">
window.open (:P0_PRODUCT_PAGES); 
</script>');
end;
That code currently replaces the existing page with a blank page and the associated URL is "https://apex.oraclecorp.com/pls/apex/wwv_flow.accept". I am assuming this means that APEX was looking for an application ID and/or page and did not get it so it "stopped" at this page.
I am unaware if there are any settings on the APEX server, DB,or associated web server preventing me from navigating outside of APEX once I am running the hosted application.
I would like to launch another properly-sized (default) browser window rather than replace the existing window pointing to the URL for the selected application.
I have also tried using the owa.util code to try to generate the proper URL but was likewise unsuccessful.
NOTE: I am not looking for different ways to do this by changing server parameters, settings, etc. since I do not have server rights to do this. Additionally, due to time constraints, I would prefer not to be drawn in to a discussion of the comparisons and/or benefits of owa.util or javascript over the other for navigating to an external URL from within APEX, etc. (I'm not trying to be a "punk", but I AM under the gun to resolve this with very limited time). In light of this, please indicate if you have a working option to do this under similar conditions that I can implement quickly. I have done much research within the forums and Googled extensively for information from outside sources but have not yet found something that will provide the proper results.
If you are an oracle employee and wish to contact me directly, please email me at [email protected]
Crossing my fingers and hoping someone has done this before.
Many thanks in advance; your useful contribution will actually contribute to lessening the world's INSOMINA factor considerably (mostly mine). ;)

>
I would like to launch another properly-sized (default) browser window rather than replace the existing window pointing to the URL for the selected application.
I have also tried using the owa.util code to try to generate the proper URL but was likewise unsuccessful.
>
Opening a URL in a new tab or window has to happen in the browser, without submitting the page. The server doesn't know about browser windows. Use:
onchange="window.open(this.value);" in the HTML Form Element Attributes property of <tt>P0_PRODUCT_PAGES</tt> (making the "Go" button unnecessary), or, if the "Go" button is required to match the LAF:
onclick="window.open($v('P0_PRODUCT_PAGES'));"in the button Attributes property, ensuring the button is a template button including the <tt>#BUTTON_ATTRIBUTES#</tt> substitution string, e.g.
<input type="button" value="#LABEL#" #BUTTON_ATTRIBUTES# />Ensure that absolute URLs are used in the <tt>P0_PRODUCT_PAGES</tt> where necessary, specifying the correct scheme for the site, so that you are not trying to go to <tt>{noformat}https://apex.oraclecorp.com/pls/apex/www.google.com{noformat}</tt> for example:
f?FOO:BAR:&APP_SESSION. // other APEX app hosted on apex.oraclecorp.com sharing the same authentication scheme
https://foo.oraclecorp.com // other secured internal site
http://www.google.com // unsecured external site

Form field to open a external URL passing the value typed by user in URL

I am trying to build a text field with a "Go" button beside it so that when a user types in a value (e.g. a bug number) in this text field, it opens up a external URL (e.g. bugdb URL) with the parameter being passed in the URL. e.g:
P1_SEARCH (Text field): 464666 (value)
So when I click on the Go button beside it, I want a URL to open in a new browser with the following URL:
http://xxxx.oracle.com/pls/edit_info_top?report_title=&rptno=:P1_SEARCH (P1_SEARCH should be replaced at the run time)
I tried using the branching and javascript:popupURL but I was not able to achieve the above mentioned flow.
Also, I noticed that when I try to create a button in a region selecting the option "Create a button displayed among this region's items", a javascript:doSubmit is automatically associated with it. Is there any way of changing it to javascript:popupURL?
Can somebody help me to resolve this issue? Thanks in advance.

Narayan,
Please don't post the same question twice. If you don't get an answer, it's OK to "bump" it by replying to your own question. You've already asked this question here:
issues while invoking external URL
Sergio

Source system set up for internal / external access

Hi all.
We have an EP 6.0 (NW04 SP16) system delivering BW data from a back-end BW 3.1/3.2 system. We are using BW Report iViews to deliver all reports to external and internal users. I am having a very specific problem when setting up the source system for the BW system.
The BW Report iView object uses the WAS hostname parameter(found under: System Administration -> System Configuration -> Systems -> BWSourceSystem -> Open ->Object -> "Web Application Server (WAS)") when retrieving the back-end BW report.
When this parameter is set using an internal host id (internal_host.company.com) internal users can access the report in question, but external users can't. Alternatively, when this parameter is set using an external host id (ie. the host of our DMZ proxy server) external users can access the report, but internal users can't.
I need to find a way to use one hostname for this parameter that will work for both internal and external users. I have worked with the HTTPURLLOC table and this solution works great for URL iViews, but not for BW Report iViews. Does anyone have any suggestions? Thanks!

Hi Shashi.
We did find a solution using web dispatcher. We actually installed two instances of web dispatcher... one in our DMZ for external access and another one our corporate LAN. The web dispatchers are configured identically and the EP instance knows only one hostname:
name.company.com
The port passed to the URL https://name.company.com:port is what tells web dispatcher what to do with the request (ie. pass the request to EP, BW, ECC, R/3, etc.).
Be aware that EP allows for only one hostname for Source System Setup - my name.company.com in my example above -(this is the EP Web Application Server hostname (WAS) parameter found under System Admin - System Config - Systems) - so you may need to do something like we did:
register name.company.com on the internet as a public address and use that DNS mapping for external users (using your DMZ version of webdispatcher). Subsequently, use internal DNS or host name mapping to register an internal private addresss for name.company.com (using your LAN version of web dispatcher). this will allow both internal / external users access to the portal and other SAP back-end systems.
It may sound a bit kludgy, but believe me - we tried everything to make this work. I took this all of the way to SAP and this was the recommendation SAP made for allowing both internal and external users access to portal and BW data.
Hope this helps!

I am getting "The contents cannot be displayed in a frame" error when tried to acces an external URL configured through launchpad(ESS). How to rectify it?

Hi Guys,
We have configured ESS role through launchpad. For viewing payslips we are using an external URL configured through launchpad.
But when we try to access the configured link in ESS role, it displays "The contents cannot be displayed in a frame" .
Should I need to change some parameters/settings in Launchpad so that I could overcome this issue.
Guidance required,
Regards,
Ajeeth Kumar S

Hi Shankar Reddy Chamala,
Thanks for the alternate solution.
But the solution you have provided also ended up with the same error
"The content cannot be displayed in a frame" error.
Some additional information so that you could help me out,
The following is the test report .
HTTP/1.1 200 OK
Server: TIN-AppServer
Strict-Transport-Security: max-age=15552000
Cache-Control: no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
x-frame-options: DENY
Content-Type: text/html; charset=UTF-8
Content-Encoding: gzip
Content-Length: 2421
Date: Thu, 15 May 2014 14:23:14 GMT
Connection: keep-alive
Vary: Accept-Encoding
The tester has mentioned the yellow highlighted property may be a cause for this issue.
I googled that the highlighted property is set by the website owners for security reasons.
Shankar I have another doubt..
Is it feasible to create an HTML document to open the external link and link the HTML document to the iview and then configure the custom iview with launchpad.?
-->If yes can you please elaborate the steps for it.
Thanks and Regards,
Ajeeth Kumar S

Changing Internal & External URLs?

Similar Messages

Maybe you are looking for