Changing of the standard port 1521 and afterward problems with Single Sign

System / Host Environment
Operating System: HP-UX 11i, Existing Oracle RDBMS Vers. 9.2 x, Listener on standard port 1521
9iAS System Architecture: 9iAS Infrastructure and Middle tier (AS Instance) on the same machine
Problem Environment:
-Before and during the installation of 9iAS infrastructure the Listener of the existing Oracle RDBMS was stopped
-The installation of 9iAS Infrastructure (db: IASDB) Version 9.0.2.0 works well
-Afterwards the port 1521 of IASDB changed to 1525. For a detail description of IASB port changing please refer to Doc. ID: 211 929.1 AFTER CHANGE 'IASDB' LISTENER PORT
-The installation of Patch Set 2 (Common Patch 2703110) follows (9iAS is now up to Release 9.0.2.2).
-The Installation of 9iAS Middle tier (AS Instance) Version 9.0.3 follows
Problem description:
-During the installation of 9iAS Middle tier problems with Single Sign On occurs.
The reason of this problems seems a communication problem between the Single Sign On login sequence and the IASDB. After a reset of the port changing (back to the standard port 1521) the installation of 9iAS Middle tier works well.
Through this incorrect and problematic behaviour we have some notes and questions:
-Well at first the description of the port changing in Doc. ID: 211 929.1 seems us incomplete. Some configuration still carry on the standard port 1521 and not the knew value of the port 1525.
-So we want to know all configuration files and parts where we have to change the port value manually ?
-What will happened to the Single Sign On function with this manually port changing. Does Single Sign On works later on correct or have we to change much more ?

Currently, changing the listener port is not supported. It must stay on 1521. I believe this is to be fixed in a latter release (perhaps 9.0.4)

Similar Messages

  • All of you who use the 80gb ipod classic and have problems with it freezing and syncing with itunes...well I have joined the club. This is a serious issue with apple and they need to correct it. I have tried everything to no avial.

    This is beyond frustrating. I just wasted 70 dollars between a new battery and gas for my ipod 80gb classic. It was having major issues syncing and freezing with itunes. I tried everything possible and noticed that a lot of people have been having the same issues with their ipod classics as well. I must have restored it several times and now it just totally bit the dust. Now I have to shell out 130 dollars to send it in to apple to be rebuilt/fixed. This is nonsense and I just cant believe apple isn't doing anything to address this issue. My ipod was doing great for about nearly 5 years and now  this. I even down-graded to itunes 10.7, but by the time I had it set up to try, that's when my ipod totally failed and will not even come on. Grrrrrrrrrrrrrrr

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • I have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    See: http://support.apple.com/kb/TS3694#USB
    However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality.

  • DISPATCHER  : avoid change of  a default PORT 1521

    I have configured DB 10.1.0.3 with SHARED SERVER .
    If I connnected to the database (SERVER=SHARED), dispatcher would use
    non-default PORT as
    "D001" established:5 refused:0 current:4 max:972 state:ready
    DISPATCHER <machine: ............., pid: 19839>
    (ADDRESS=(PROTOCOL=tcp)(HOST=..............)(PORT=35972))
    I use my database behind the firewall in DMZ , so I want to use a default PORT 1521 with my dispatcher D0001.
    There was an option "PORT" in a initialization parameter DISPATCHERS in previous DB versions. I cannot use this option in the database release 10.1.0.3.
    Help me?

    I'm afraid you can't do that, at least with that version.
    See http://download-uk.oracle.com/docs/cd/A97329_03/core.902/a92171/concepts.htm#1016370
    Here an extract :
    The metadata repository is always configured to use port 1521 and has a service name of the form iasdb.host.domain (for the first infrastructure on a host) and iasdbx.host.domain for any subsequent infrastructures on that host). You should never change these values.

  • I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?

    I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?
    Lance

    download the installation file(s) and activate with your serial number,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.<

  • Changes to the Standard Text Key in a PM order

    Hi all,
    Is there a better way to track changes to the Standard Text Key in a PM order? When I change the Standard Text Key in the Operations tab (t-code IW32) and I access the change log (menu: Extras > Other documents > Changes) I only see that the language key has been changed. I don’t see the actual Standard Text Key value. Any ideas?
    Thanks in advance for your help.
    Adriana

    Hi
    To use standard texts, perform the following six steps:
    Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
    You can enter standard text keys in this screen or in a detail screen for the relevant operation.
    Enter a standard text key in the appropriate field and press ENTER .
    If the text is longer that the short text line available, the field Text is selected for that operation.
    Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
    The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
    Check the standard text and change it if necessary.
    Save the final version of the text and return to the previous screen with Goto--> Back.
    Save the maintenance order.
    Standard texts are created for your system by your system administrator using the Customizing function.
    Regards
    Makarand Gurjar

  • Request For Quotation: Changes to the standard smartform YBUS_MMRFQ

    Hi Friends,
    I need to do changes in standard smart form of "Request For Quotation". Can any body please explain me how to do changes to the standard smart form with examples. This is my first object on smart forms. Please help me out.
    Thanks and regards,
    Linchon.
    Moderator message: these forums are no subsitute for proper training, please search for avaibable information or attend classes.
    Edited by: Thomas Zloch on Feb 27, 2012

    hello,
    I have created new posting period and series for financial year 2011-12.
    In previous year I have created 600 voucher. My issue is that when I am creating new
    voucher, voucher number is showing 601. I want that for new series voucher number should be
    start from 1. but it seems like numbering series doesn't affect the voucher number.
    Because there are no series creation for journal voucher. In this case how can I solve my problem.
    Please help me on this.
    thanks
    Annu

  • I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery

    I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery... or just buy a galaxy s5?

    If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board.  Charging/plugging in to a power source is very damaging to wet electronic devices.  There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
    You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again.

  • I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing? The output sound settings are showing as digital optical only? Any ideas :)

    I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing from the port? The output sound settings are showing as digital optical only? I used the headphones in the laptop for the first time yesterday and have had this problem ever since. Any ideas

    The internal switch in the audio output port is stuck.  Try inserting the earphone plug a few times.  If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
    Ciao.

  • Buyer change the PO line items and end up with Awaiting Approval status.

    Can you please help to look into this issue.
    1.Buyer change the PO line items and end up with Awaiting Approval status.
    2. But user claim that she got enough limit and should not route to her manager's approval. Also check with her manager and this PO do not exist his queue.
    Any clue or tips on how to investigate on this issue. All your tips are appreciated,
    -Rick

    You cannot change these POs because their changed version has status
    'Deleted'. My proposal to fix them will be the following:
    You will have to set changed version as closed(DOC_CLOSED set to X)
    and in active version set DOC_CLOSED to space.
    __-For the above statement, Can you guys please let me know, which table DOC_CLOSED belongs to and what are the steps to do this, as i come from a functional back ground.__

  • Using the In port.vi and Out port.vi in LabVIEW access my the Cards(Home made)

    Hi Everyone,
    I have got the Cards (home made 8 bit and 16 bit ) plug in at slot ISA my PC (I am using the commands inport and outport (addressed with 318-31A Hex) in C language to access very good).This now,I want to use LabVIEW language to access data directly to Port at my the Cards. In LabVIEW, Can I access data to port using the In port.vi and Out port.vi located in the Advance?
    My English is poor, you don't laugh when you read it.
    Thank you a lot.

    SachaE wrote:
    > LabVIEW 7.0 cannot use the built-in In/Out Port VIs with a 32-bit
    > address. Instead, you will have to use the versions of these VIs found
    > in previous versions of LabVIEW.
    Are you talking about physical memory access here? If so that is
    something entirely different. The Intel x86 architecture uses a separate
    IO address range which is entirely separate from memory space.
    And at least up to the first Pentium models it was definitely never
    possible to address more than 16 bits for IO address space.
    This of course has gotten a little more complicated nowadays with many
    PCI boards being actually mapped into memory address space instead of IO
    address space. So eventhough a PCI board is more like an IO device it
    often is accessed in the memory space.
    > Actually, the In Port and Out Port VIs are intended for 16-bit port
    > I/O and not for writing to arbitrary addresses in memory. For this
    > reason, writing to 32-bit addresses never should have been allowed.
    I think the VIs to access physical memory addresses were different than
    the ones to access IO addresses. And yes it is definitely not a good
    idea to have an application poke into physical memory as it could
    completely screw the system to the point where you couldn't start it
    anymore. Also IO devices mapped into memory address space are almost
    always typically plug and play devices, so their address is not really
    fixed and you need to do quite some more work on OS level to enumerate
    your hardware and find the resources used before trying to access it.
    This is something not really suited to try to do in LabVIEW and
    therefore should be at least implemented as DLL but in fact anything but
    a device driver is a very bad kludge.
    > One possible work-around would be to use NI-VISA to perform
    > register-level programming. NI-VISA gives you access to any PXI/PCI
    > board, not only NI boards, and can be used to access the board's
    > registers.
    >
    > http://zone.ni.com/devzone/conceptd.nsf/webmain/ADF3152837E2B4A486256B5600642AC7?opendocument
    Thanks for this. Didn't now this existed in NI-VISA. Will check it out.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Just purchased Wndows Vista and having problems with the port for Palm 125

    I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop.  I get an error message saying:  "Com1 not available"  What do I do?
    Thanks,
    Frustrated
    Post relates to: Palm m125
    This question was solved.
    View Solution.

    Sorry, that didn't work.  I get no drop down menu from the Hot Sync Manager for the Serial Port.  What comes up often is:  "The selected port, COM1, is not available at this time.  Hot Sync Manager will open the port when it becomes available." 
    Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port?  Just a thought.  Thanks for your help.
    Post relates to: Palm m125

  • Hi I've just bought the standard acrobat download and its in windows and I have a mac - what next?

    Hi I've just bought the standard acrobat download and its in windows and I have a mac - what next?

    Contact Adobe to see if you can return or exchange this. There is no automatic way to deal with this.

  • TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

    With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

    Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad.  Pay real close attention to the outgoing server name, and port.  You may need to change in on the pad. 

  • The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

    I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
    I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
    I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

    I "think" the trick was unbinding and rebinding the computer account.
    After unencrypting and trying to reencrypt Filevault would still not take the new password.
    Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
    Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

Maybe you are looking for

  • Powershell and Outlook 2007, trying to delete messages in a folder older than date

    I was hoping to get a powershell script that would do the following 1) Connect to outlook 2007 2) Go to Mailbox folder (not an inbox subfolder) called 'Processes' 3) Delete all email from that folder older than 3 days old I did some searching, I have

  • How to bind DATE variables in SQL*Plus

    I have a stored procedure in a package that has a DATE OUT parameter myPackage.myProcedure( outDate OUT DATE ) I am trying to test this from SQL*Plus How do I specify a Bind variable for the outDate? The VARIABLE command does not allow DATE types? If

  • Setting up a mail server

    Ok, i'm a novice when it comes to setting up and installing a mail server, but i really want to learn because our mail service ***** and i want to be able to control it. What i really want to do is just set up a dummy account on the leopard server an

  • How to change the way VLC starts up

    I have installed VLC via pacman, I would simply like to change it so it runs all the time with vlc --control lirc For example I have changed it in thunar when I open video files, it's fine, but some programs call the binary itself automatically (like

  • Can i turn my notebook on without pressing the power button?

    I have several MacBooks (no! not MacBook Pros) and I wish to build a stamnd for them on my desk so that they all stack up, and can be controlled though a KVM. I have all the hardware and infrastructure designed, but I can't seem to find any way of tu