Changing playcount on a track

I listen to audiobooks which are part of a smart playlist that selects tracks by "album" name and "0" plays. This causes each track to be removed from the playlist once it has been played. My problem is that there has been situations when I have forgotten to stop itunes and tracks are completed. I would like to be able to change the plays on the tracks so that they are not removed from the playlist. Does anyone know how to do this? TIA

Select the track
"right" click (or "control" click) the track
select "reset plays" from the contextual menu

Similar Messages

Change a non-looping track to looping

I'm using STP 2.0.2
I also just started reading Apple Pro Training Series 'Soundtrack Pro' by Mary Plummer.
It seems my interface is not the same as what she shows in the book. Doesn't state what version STP it's referencing.
Questions and confusion so far are:
1. I can't find anywhere a way to change a non-looping track to looping. It's not in the clip drop-down or when I right-click the clip in the timeline.
2. I can't find the format button (it's not on the top tools bar next to the sample rate selector). I can only change beats/time-based from the Multitrack drop-down.

That book is from 2006. I'm sure it's version 1. You should update to v3 anyway. It's being more stable, especially under Snow Leopard.

How do I manually change the genre or track name

I'm new here, so forgive me if this is easily done. I would like to know how to manually change a song's track name, or genre in iTunes. If i feel like a song is more appropriately labeled "pop" vs "rock" can I change the label? Any help would be greatly appreciated. Also, i'd like to be able to do the same with track names. Thanks.

Right click on the track you want to change. Choose Get Info and then the Info Tab. You can change the song name, artist, genre etc. in there.
You can also update multiple items, however beforehand you sort your tracks into the order you want, say for instance by Artist. Click on the first track you want to change, hold down the shift key and click on the last you want to change and all the tracks in between will be selected. After that it's right click etc as above.
You'll get a lot more on using iTunes here: http://www.apple.com/support/ipod101/tunes/ Lesson two includes changing track information.

Changed information on a track reverts to old information on playback

So I add an album to itunes. I then change stuff about the track to my preference (Artist, song title, genre, etc.). Then as soon as the song is played all the information reverts to what it was when I first put it in itunes. This doesn't happen on every track, just random ones.
I had read somewhere to change the ID3 tags to the newest version, so I've been doing that as soon as I put an album in, but it doesn't seem to be helping.

You may have another program messing with the files. The usual culprit is Windows Media Player. Go to WMP Options, and on the Library tab uncheck everything that talks about automatic updates, etc.

Changes in SP2 Multi track editor DO NOT update in FCP timeline....

Hi all
Changes in SP2 Multi track editor DO NOT update in FCP timeline even if I do a "save as" all my changes and effects remain in SP2 and won't transfer over to FCP. The best I can get is full mixes of each Channel of audio. Am I right in believing That multi track is dynamically linked too?
Can you tell me how to do it please?
Rob

Hi Rob,
If i've understood you correctly, though you can conform tracks in STP2 of any changes in FCP6, any updates in FCP6 will not automatically update in STP2. You will need to EXPORT your final master mix from the multi-track editor with choosing 'update to final cut pro sequence' in the 'after export' drop down tab.
When you open FCP6 it'll ask you to update and once said yes, all tracks in FCP6 will be muted and a new two track master mix will be placed under the video base layer for a final conform.
Cheers!
Himayath.

The musictracks on my iPod Nano don't play till the end but suddenly change to the next track. How can I solve this problem ?

The musictracks on my iPod Nano don't play till the end but suddenly change to the next track. How can I solve this problem ?

You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Custom change document is not tracking changes for SAP tables

Hi gurus,
I have created a custom change document for tables EKBE and KONV. But the change document is not tracking changes in BDCP table for changes in EKBE or KONV.
Please help me out.........

HI,
Use this link for change pointers concept.
change pointers
let me know if u have any issue.
~linganna

How do I get Garageband '08 to stop changing the pitches on tracks?

I just recently updated Garageband to '08. Since then, I have started having problems with songs that I started recording prior to the update. Garageband is changing the pitches/notes for both Live instruments and MIDI instruments. I have tried changing the Key of the song on the master track. This doesn't always work. What if my song changes keys?
I have tried deselecting "Follow Tempo and Pitch", but it just selects it again on its own. In addition, that is only an option on the Live instrument tracks. What about the MIDI tracks? In short, how do I get it to stop doing this? I am considering moving back to the previous version of Garageband.

I really wish the Apple team would fix this. It's one of those nagging things that was overlooked, I would imagine, and no one but musicians that perform would notice.
Anyway, my workaround is this. I just put a really long silent space at the end of the song giving me time to stop it before it loops.
Hey ipad/garageband team - How about a new release of gargageband?

How to change font size for tracks in Songs view, iTunes 11?

I'm wondering which field in TextStyles.plist for the new iTunes 11 (I've gotten rid of Helvetica for Lucida Grande thanks to another forum on here!) - controls the font size for track title, time, artist, album, etc. as seen here - I would like to have it smaller, and have been playing around on several forums and not found the magical field to get that exact thing smaller. Many thanks in advance.

You're going to love me forever:
<key>9002</key>
<dict>
<key>- loc hint -</key>
<string>List Contents (Small)</string>
<key>font</key>
<string>HelveticaNeue</string>
<key>size</key>
<integer>12</integer>
</dict>
It's that interger "12" that's determines the size. Adjust it until you're happy—provided that it's an interger.
I actually go with "HelveticaNeue" with a size of 11. I like to see lots of tabular information at once, horizontally, without changing my resolution… within reason, e.g. Fiona Apple album titles still have ellipses.
An unfortunate aspect to this is that the row height isn't altered unless the font size specified is greater than 12—the font takes the row height along for the ride when it's bigger, but the row doesn't come along for the ride when the font gets smaller. It's likely you could change the minimum row height to be lower, in some other plist—search for something like "list contents (small)" or "list (small)" or whatever—but I don't know where that would be found, or if it could be found at all.
Nonetheless, this should address your query.

How can I change the order of tracks in iTunes?

When I changed the information of certain tracks such as the track title, album name etc. on some of my books on audio (because the information did not import with the audio, except to name them "track 1", "track 2" etc. or I changed the genre or whatever) the order of the tracks were changed in the iTunes lirary and subsequently on the iPod as well. Now of cource the chapters of the books play in an obscure order. Not good for audio books! I tried to "drag and drop" the tracks in the desired order, but that does not seem to work. Next I cleared them from iTunes altogether and sent them to the recycle bin and then restored them. Before I put them back into iTunes (when they were still just a file in a folder and not associated with any particular player) I even alphabetized the titles beginning with "1 of 5", "2 of 5" etc. but now the volumes of books are in different orders. As an example, in the "Left Behind" series by LaHaye and Jenkins now the book Apollyon plays first instead of it's correct order in the series which would be fifth. There must be a simple way to change the order of the way a book in a series of books or tracks of a book plays within iTunes without creating a seperate playlist for every book or series of books this happens to but I'll be darned if I can figure it out. Can someone please help me?
Intel 3.4 Ghz. with ht technology Windows XP Pro

No, iTunes does not put these in order when the top "Album" or "Name" tabs are clicked.
I tried that first of all, but failed to mention it in my original message. I appologize.
For instance, there are twelve books in the left behind series and each book (exept for two of them) has 5 tracks each, the two exceptions have four tracks each.
Using "get Info" and clicking the "Info" tab, all tracks of all books are labeled "Left Behind Series" in the field titled "Album".
On the right side of the dialoge box all tracks associated with the first book are labeled 1 of 12, second book, 2 of 12 and so on in the two boxes marked "Disc Number".
In the two boxes marked "Track Number" each track is labeled 1,2,3,4, or 5 of 5 for the corresponding track.
In the "Name" field for each track I use, for Example, Volume 2, Tribulation Force: Part 1 of 5.
The fourth book in the series is called "Soul Harvest" and is recorded on five rather lengthy tracks. The information for the third track of this book is labeled as follows:
Track Number: 3 of 5
Disc Number: 4 of 12
Name: Volume 4, Soul Harvest: Part 3 of 5
Artist: Tim LaHaye and Jerry B. Jenkins
Album: Left Behind Series
I am using the latest version of iTunes, Ver:6.0.4.2, for Windows xp. I am resonabaly adept at moving around in the program and was certain that by changing the information as I did, I would not only make the information easier to see and use on my iPod but that the books would finaly play in order as they never have been in proper order before.
For the life of me I can not seem to figure this one out and find myself spending far too much time on this.
Intel 3.4 Ghz. Windows XP Pro

How to Change Carrier for Package Tracking in Apple Mail 8?

When I receive a shipping confirmation email, Apple Mail automatically detects the tracking number and creates a hyperlink to USPS tracking. This is wonderfully convenient... if you live in the USA.
I live in Canada, so most of my packages are shipped with Canada Post. Naturally, USPS doesn't recognize the tracking number, so this feature is essentially useless. Is there any way I can change the carrier to Canada Post, or preferably to a universal tracker such as www.packagetrackr.com?
I was hoping Apple would address this with the release of Yosemite/Apple Mail 8, but I can't seem to find a solution. Any help would be greatly appreciated!

If you're talking about the sender name (the name that appears on the From line when you send email), to change it on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac (Command-Q) and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.

What is the relationship between Change management and Issue tracking?

What is in general change management and what is issue tracking in a SAP point of view?

Hi
See this thread
Re: SAP APO
Additional inputs :
APO refers Advanced planned and optimizer
APO is similar to BW in the sense it is also a OLAP processor intended for reporting needs
Supply chain management
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/79eb3cad744026e10000000a11405a/frameset.htm

Global changes on an audio track or between in and out

I've come over from Avid and on Avid I could set an in an out point on an audio track and then changes the values of volume and pan which would then be changed between the in and out points. I'm editing an interview and the radio mic channel has flipped over to one side and I want it in the middle and cannot get it to stay there. I know that I can "write" in the audio mixer and just hold it there for hours, but I'm assuming there is a simpler way. I know about paste attributes but it's not clear what I'm copying and where I'm pasting those attributes. It would be far simpler if I could just select the audio track, set it the way I want it and tell it not to change for the duration. Any ideas?
Thanks

At the lower left of the timeline, there's a button that looks sort of like an upside down V. Click it- the clip overlays. You'll see red lines appear on your audio tracks. Grab the pen tool. Using it, you can click on the red rubber band lines to place key frames where you want. in your case, click once where you want your audio to begin fading out, then click again where you want the fade to end. On this last point, drag the keyframe all the way down, vertically.
As mentioned earlier, you can do this in the viewer as well - using the pen tool.

How do I change the order of tracks in an album?

I've got an album of uploaded tracks and they're automatically in alphabetical order. Is there any way I can change this? Thanks

Click on a different column header...
Selecting Artist or Album or track # will sort in track order.

HOW DO I CHANGE THE AMOUNT OF TRACKS I CAN HOLD, i already knw how2 add em

i posted before on the same thing but i wasnt as clear, i wanna know how to change the amount of audio tracks i can hold, not how to add them, i know how to add more, just click create multiple in the track menu in the arrangement window. i cant hold more then 16 audio tracks cuz everyone after is blank with out the option to record. how do i change it so that i have more then 16 audio tracks, each with the option to record on them. please help!
p.s. gorge dude i didnt see any drivers window after preferences, lost am i ><

o nevermind, jorge was right, in the drivers window u can change this, i found it when : go to preferences, go to audio, look at the lil tabs under the bigger icons, right under the audio icon u see drivers, click it and u see the max number of tracks thingy, thanks alot dude

Changing playcount on a track

Similar Messages

Maybe you are looking for