Changing the Application Parameter in the mass copied iviews

Hi,
I have copied the standard package iviews,pages,roles to a custom folder.Now I want to change the "Application Parameter" of the all copied iviews.Is it possible to do the mass change of a single parameter in all the copied iviews?
If possible,please suggest how to achieve the same.
Thanks,
Rajani

Hi,
Yes, you can use the Multiple Property Replacement feature : [Multiple Property Replacement|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0f/764b87dfb948fcb13fd7695e157892/frameset.htm].
Regards,
Pierre

Similar Messages

  • How to define the application parameter 'sap.xss.BaseConfigurationID'

    Hello All,
    I am developing a webdynpro ESS custom self service application. I have completed the development of the DC. But at the end when I am creating the application for the DC, I am not able to figure it out how to define the application parameter 'sap.xss.BaseConfigurationID' for the application. I have defined remaining all the parameters as specified in the following link.
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/3b95dab4ab1800e10000000a1553f6/content.htm]
    Could any one please detail the process to define the parameter 'sap.xss.BaseConfigurationID' ?
    Thanks a lot.
    Regards,
    Seshu.

    Pick a representative file.
    Get info. (Command-i)
    There you will see a place "Open with" where you can select the application for that file.
    Hit the "Change all..." button to do this for all files of this type.
    charlie

  • Changing stack applications icon in the dock

    Dear readers,
    Do anyone now how to change the aperence of the application's stack in the dock. The stacks automaticly vieuw the contents of the folder. but i dont like that because you cant see clearly if it is the applications folder or the download folder.
    greetings
    Valentijn

    do you have an advanced copy of 10.5.2? the options you describe are not currently available but are reportedly present in 10.5.2.
    back to the original poster's question. You can wait a few days till 10.5.2 comes out and then you'll be able to do what Kappy says. If you don't want to wait you can put an image (or an icon) file in the folder used for your stack and rename it so that it comes first alphabetically. This way your stack will (mostly) look like that image.

  • How do the application servers connect the new database after failing over from primary DB to standby DB

    How do the application servers connect the new database after failing over from primary DB to standby DB?
    We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
    When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround. 
    Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
    Oracle support provides us the answer as following:
    ==================================================================
    Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
    After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
    Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
    JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
    FAN server-side callouts can be configured on the database tier.
    FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
    =======================================================================================
    Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
    Thank very much in advance.

    Hi mesbeg,
    Thanks alot.
    For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
            <subsystem xmlns="urn:jboss:domain:datasources:1.0">
            <datasources>
                    <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                        <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                        <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                        <driver>oracle</driver>
                        <pool>
                            <min-pool-size>2</min-pool-size>
                            <max-pool-size>10</max-pool-size>
                            <prefill>true</prefill>
                        </pool>
                        <security>
                            <user-name>TEST_USER</user-name>
                            <password>Password1</password>
                        </security>
                        <validation>
                            <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                            <validate-on-match>false</validate-on-match>
                            <background-validation>false</background-validation>
                            <use-fast-fail>false</use-fast-fail>
                            <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                            <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                        </validation>
                    </datasource>
                    <drivers>
                        <driver name="oracle" module="com.oracle.jdbc">
                            <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                        </driver>
                    </drivers>
                </datasources>
            </subsystem>
    If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

  • Error on boot: "STOP c0000135 unable to locate component csrsrv.dll not found reinstalling the application may fix the problem"

    I am running Windows Server 2003 R2 (I know it's old, I'm in the process of upgrading it now to 2012) on an old HP ProLiant server. It's worked for ages, but yesterday morning it booted up with the blue screen of death, saying:
    STOP c0000135 unable to locate component csrsrv.dll not found. Reinstalling the application may fix the problem.
    I have tried coping the file from C:\WINDOWS\ServicePackFiles\i386\csrsrv.dll to C:\WINDOWS\system32\ using a WS2003R2 recovery disk, but it still doesn't work. I'm not sure what to do now...
    I do have backups, but I'd prefer just to get this server back up and running so that I can continue to migration so that I can decommission it permanently and put it out to pasture...
    Any help and guidance is greatly appreciated.
    Thanks in advance!

    If copying the DLL does not help then I would recommend doing a system state restore from a backup.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Could not edit original smart object because the application which created the smart object could not be launched

    could not edit original smart object because the application which created the smart object could not be launched

    Hi there,
    I got this problem when I installed Adob master collection Over CS 5.
    I had children book story storis which created in Adobe illustrator CS 5 and I created art boards in Adobe photoshop cs 5.
    After installting CS 6 i tried to edit the smart objects and it was not opeinging the smart object file in Illustrator.
    I did some tests.
    1) Right click on smart object layer and click export contents. Save on desktopp or anywhere you want. (I saved on desktop)
    2) I had this file on my desktop (Vector Smart Object10.ai) but it didn't show any icon, which program should open this type of file.
    3) Double click on the file and it pop up a extension window 'Click on change and select adobe illustrator' and press OK.
    4) Go back to your photoshop file and right click on smart object layer and click dit content. now this time it opens up assets in illustrator.
    ENJOY!
    Thanks
    Haroon
    www.4d-studios.co.uk

  • I have been trying to move pictures to iphoto and am now receiving a message that "you cannot open the application iphoto because the classic environment is no longer supported.

    I have been trying to move pictures into iphoto and am now receiving a message the say I "cannot open the application iphoto because the classic environment is no longer supported."

    Launch iPhoto the the Option key held down and create a new library.  See if you can import those photos into it.  If you can then your current library is damaged. 
    If that's the case make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
    Fix #1
    delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
       2.  delete iPhoto's cache files that are located in the Home/Library/Caches/com.apple.iPhoto folder. 
    Fix #2
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select last three options. 
    Fix #3
    Use  iPhoto Library Manager to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Skip the Application manager - get the Trials

    I spent most of last night fighting with the Application Manager. Sometimes it would download, or not. Same with installation when the package was already downloaded. There was no consistency in which apps it would or wouldn't finish. I was able to finally get them all installed, but it took a while. Choosing "retry" would sometimes work. The Application Manager also gave my system a Kernel Panic. Twice.
    Suggestions I've tried:
    - the font deletion method
    - the cleaner app
    - the Disk Utility preferences change
    - restarting the system
    - repairing disk permissions
    None of these worked.
    The only thing I've seen in working in these threads is to skip the Application Manager and download the Trials, activating with your Creative Cloud Adobe ID. If this is the only full proof way to do this, why even bother making / using the Application Manager. The other method is what retail and business users use and seems to work fine.
    Even though I finally have everything installed I'm downloading the trials in case I need to do a re install in the future. Maybe by then Adobe will have worked this out. I like the simplicity of the Application Manager but in practice it's ineffective.
    Setup for reference:
    edit : added nots about Kernel Panics.

    It's OK. Stop the download, and try another trial download (choose the same language  you've ordered!) manually.
    Don't think there's any download limit !

  • I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    Simple process. If an iPhone go to the Apple Store and not Verizon
    the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
    good luck

  • When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open.

    When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open. when i click reopen it wont. but i know safari works because thats what im using right now. it just wont open when i click the one i had loaded on my dock and in applications. please help!
    Stephanie

    Drag the Safari icon straight up and off the Dock so it goes, "poof" ...
    Now click and hold the Safari app in the Applications folder and drag that to the Dock.
    See if you can open a webpage in Safari.

  • Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resourc

    Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resources window then I have to refresh the internet search address line at the top of Safari. Can someone tell me how to stop this. It started after a software upgrade. It didn’t do that before. Thank you.

    A few thoughts for diagnosis/testing purposes:
    Have you recently run the disk utility and repaired HD and permissions? If not do so.
    Boot into the Safe mode - hold down shift key on boot - and see if the problems are still there. Some functions won't work but see if anything odd happens.
    Check your startup items. Get rid of them temporarily.
    Create a new user account and see if the problems occur with the new account.
    Lastly, be sure your backup is up-to-date.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this

    The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this an endemic problem with others? I'm using Google Chrome as my browser. Is this an issue with the problem?

    Similar problem just happened to me with the Creative Cloud Update 1.7.1.418—slightly different so I thought I'd share. I have multiple Adobe Creative Cloud programs installed on my computer, all working just fine. I updated the Cloud App to the latest version and then it shows me that I have only one program installed! All my previously installed programs (Photoshop and the like) still work but show as "install" instead of "Up to date". Initially I thought I'd have to re-install the Cloud app or recreate the OPM data base but then I noticed that some of the Cloud app preferences (Apps > Settings > App Language) were different to what I had set previously. I use English (International) language, the update had reverted the app back to English (North American). I flicked back to my previous language and bam, all my apps now show as being installed correctly.

  • I have been lost the Application folder in the Dock, possibly by a bad operation or don't know what happened.  Someone do want collaborate with me to reinstall it in the Dock? How can I do this? My Mac is a MacBooK Pro (mid 2009), OS X 10.7.1 Lion. Thanks

    Can anybody help me to reinstall the Applications folder in the Dock?

    yeyopel,
    Go to your Macintosh HD Folder and drag the Applications Folder to the Dock.

  • Hi, we just bought a Macbook air and we can't find the 'reminders' app in the applications or through the spotlight search. Is there a link to download the app? I can't find it online or through the app store. Please help!

    Hi, we just bought a Macbook air and we can't find the 'reminders' app in the applications or through the spotlight search. Is there a link to download the app? I can't find it online or through the app store. Please help!

    Reminders is automatically installed with 10.8 or above. A new Mac should have 10.9; it's possible that, with a third-party vendor, you have an earlier OS. Check under the Apple menu in the top left and click About This Mac. That will tell you what version of OS X you have.
    Matt

Maybe you are looking for