Changing the order of report columns

Hi
I am using Application Express 4.1.1.00.23 and have created a report. What I can't seem to alter however is the order of the columns generated by the report.
It's not based on the SQL query because for example the 'Surname' field is 2nd in the select statement but on the report view the Surname column is the last column.
Is there a way of changing the order??

Simple, Edit your report page > under region click Report hyper link corresponding to your report.
There you will see list of columns where you can order the report columns using little icons on the far right. remember to click apply changes after re-ordering the columns.
Thanks

Similar Messages

How to change the order of report columns

Hi guys,
I am newbie to the Apex 3.2. I am not finding option to resequence the column display. e.g.
My columns shown as Org ID, Create Date, Update Date, Name.
I want to change it to Org ID, Name, Create Date, Update Date.
This in tabular form. Any help would be much appriciated.
Thanks
Sushil

Hello Sushil,
Go to Edit Page XX link at the bottom of the page. In the edit page under the Regions section you will see your tabular form listed. Click on the "Report" link next to your tabular form link. You will see all the report columns with up and down arrow images to the right of the columns. Just click on the images to move the columns as you like and then click on "Apply Changes" button to save the changes. Run your page and you will see the changes.
Thanks,
Machaan
P.S: Please assign correct answer points if this helped you with your problem :)

Changing the order of Report's tab drop down entries in plugin

Please let me know how to change the order of reports drop down entries in plugins.
I tried all the combinations of changing the order of REPORT_DEFINITIONS in emcli. But no hopes.
Please help me.

Better to post in Extensibility
http://forums.oracle.com/forums/forum.jspa?forumID=219

Change the order of columns in a report

hi all.
i can't change the order of columns in a report not just by altering the select statement. where can i change it?
thanks.

hi master
sir i use 6i report i see full report but i culd not found
report region and report attributes
sir please give me step or idea or tree where report region and report attrinutes"
thanking you
aamir

How do I change the order of columns in the responses table?

How do i change the order of columns in the responses table in FormsCentral? The default setting puts them in reverse order!

Hi,
The issue with the default ordering of columns in the response table is something that we hope to address in the next update to FormsCentral. In the meantime, you can reorder the columns by selecting them then click/drag using the gray area above the column name. As shown below, an orange marker will show you where the columns will be placed when you release the mouse button.
Sorry for the inconvenience.
Regards,
Brian

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

How to change the order of columns in a speadsheet?

It seems this would be completely straight-forward. However I can find nothing in help to tell me how to do this. I am using a spreadsheet for data so want to be able to rearrange in the order of the columns. How does one do this?
Thanks.
John

I don't want to move or sort the data. What I want
to do is change the order of the columns. I have
columns A through P. I want to move columns M, N,
O, and P to come after A and B so I can see the
information in these 6 columns in one glance.
How does one do that?
One doesn't, but there are altenatives.
1.
Select columns C..L by clicking and dragging across the column headers.
Go Format (menu) > Column width.
Set the width to 0 (zero) and click OK.
This hides columns C..L, showing A, B, M, N, O, P...
You can still enter data into cells in columns C..L by clicking on a cell in column B, then pressing tab to move through the hidden columns.
To restore the display, select columns B..M then reset the column width to a visible value (the current width of column B will be the default).
2.
Copy the values in columns A, B, M, N, O, and P into a set of contiguous columns. Set a New View to show these columns in a separate window.
Example:
Go Window > New View
Drag the new window that opens up and left to cover the initial window.
In AA1, enter =A1
Select AA1..AB1 then Fill right (command-R)
In AC1, enter =M1
Select AC1..AF1 then Fill right
Select AA1..AFn where n is the last row in which you have data then Fill down (command-D)
This copies the contents of the cells you want to view together into a set of cells that are together. You can view them by going to the Window menu and switching between the two views of the same spreadsheet. Or you can skip the step of creating a second View, and scroll from one location in the sheet to the other.
The usual caveat applies: Anytime you're making extensive changes to a document, work with a COPY and keep the original as a backup you can revert to should a misstep along the way result in data loss.
Regards,
Barry

How to change the order of the columns in the Message List in Mail?

In Mail, in the Message List, is it possible to rearrange the column order of Subject, From, Date, Attachments, etc?
The upgrade to Snow Leopard changed the order of the above and I want to keep the old order that I had with Leopard.
Also, there is a column which has a black circle in it. What does it mean? I don't mean the smaller black circle, because that shows which emails been read and which are not yet read.
Thank you.
Lorna

To arrange columns, click on column title (To or From) and drag right or left.
The black dot column shows the type of message. There will be a counterclockwise arrow if the email is a response to a previous email or there will be an icon of a note if the message is a note

How to change the order of columns displayed in Stacked Canvas

Dear Member,
I have a Stacked Cavas which has many Items. How do i change the order of the Items displayed when the form is opened?
I checked the X-Position in the property palette of each item, all the items have an X-position=0. I am really confused how do i change the order of the columns which are displayed in the stacked canvas when opening the form.
Any help is greatly appreciated.
Thanks
Sandeep

If i Try to use SET_ITEM_PROPERTY('BLOCK.ITEM', X_POS, myXpos);
then it will increment each item X Position. The Total Stacked Canvas width i have is 9 and there are total of 36 items in the stacked canvas each of equal width 1.1,
so the total becomes 38.5 which is greater than 9.
I saw all triggers in the code, i dont see any code which exclusively determines item positions at run time. As i said before all the items have X position as zero but still they come up nicely.
i HAVE A button in the form and following is the code which is written in when-button pressed trigger :
show_view('DETAIL_CNT');
GO_BLOCK('XX_PA_BUDGET_DTL_BLK');
where DETAIL_CNT is the content canvas and 'XX_PA_BUDGET_DTL_BLK' is the data block in which items from both stacked and content exsist.
I dont understand why this is happening.
Thanks
Sandeep

How to change the order of the columns in system matrix?

Hi all,
Is there any way to change the order of the columns in system matrix through SDK, without doing it from 'Form settings'??

Hi ,
is this true for the 'Active' property also , in CPRF table? I want to check whether the Item is active or not becuse, when I m trying to copy the value in item which is not active, I m given error. Is there any way to change or active the 'Active' flag in form settings at run-time?
Any clue?
Thanks in advance,......
Binita

Changing the order of columns in a table

Can anyone tell me how to change the order of column in a table.
I want a new column to be added in a table in 2nd position.
Is there any way out for it?

1) Does this have something to do with security? If not, it really ought to be posted in a more appropriate forum (Database - General for example).
2) Why? If you care about the order of columns in a table, you're almost certainly doing something wrong. You can control the order of columns in a view, however, so you can put a view layer on top of the table to present the columns in a friendly fashion.
3) Not without recreating the table. You can use the DBMS_REDEFINITION package to recreate the table with zero or minimal downtime but behind the scenes, you're really just creating a new table, copying the data over, dropping the old table, and renaming the new table to use the old table's name. DBMS_REDEFINITION does some extra work to track changes so that the original table can be available until the last possible moment.
Justin

Frames on reports (changing the order of printing)

Hi OTN,
I have 2 frames: frame1 and frame2.
I build a report in a way that frame1 appears first and then frame2.
What I want is to inverse the order of the frames(frame2 appears and then frame1) without rebuilding my report.
Thank u in advance

HI THERE
I DONT THINK IT IS POSSIBLE 2 CHANGE THE ORDER OF FRAMES AS SUCH PROBBLY BY LOGICALLY
SOLVING I THINK IT CAN BE WORKED OUT .PLEASE SEND ME THE PROBLEM IN DETAIL

How do I change the order of the fields in my pdf form?

I am using pdf. form I made in Acrobat and distributing with Adobe FormsCentral. We use a table format for our teachers to fill out their field trip schedules and therefore use many different fields.
How can I change the order of the fields (not for tabbing, we figured that out)...so that when we receive our notification email, I can see the inforamtion in a specific order (Date, Time, School, Program, etc).
We would also like this same order to appear in the "View Responses" table. I know you can drag and drop the order in the table but we have over 100 fields and that is going to take a really long time.
Please help???
DATE
TIME
To start/finish
Name of Program
TEACHER’S
NAME
TEACHER’S EMAIL
# OF
STUDENTS
Setup in
Room #
03-21-14
Solids vs. Liquids
03-21-14
Solids vs. Liquids
03-21-14
Solids vs. Liquids
04-11-14
Solids vs. Liquids
04-11-14
Solids vs. Liquids
04-11-14
Solids vs. Liquids

What do you mean by the "order they appear in the pdf structure"? What is the "Pdf structure"?
thank you for your help... this is really upsetting, as I thought we finally found a solution with Adobe Forms : (
We really need the fields to report back in a specific order and wouldn't have time to rearrange over 100 fields with every form that is submitted. We receive about 10-20 different forms a day (same form layout, just some of the fields will have to be prefilled depending on school/teacher reservation... so we have to name each form a different name, for each school).
Thank you again and maybe one day they will change that. Is there anyway to set it up in the web verison of Adobe FormsCentral to look similar to the table we have created?
DATE
TIME
To start/finish
Name of Program
TEACHER’S
NAME
TEACHER’S EMAIL
# OF
STUDENTS
Setup in
Room #
03-21-14
Solids vs. Liquids
03-21-14
Solids vs. Liquids
03-21-14
Solids vs. Liquids
04-11-14
Solids vs. Liquids
04-11-14
Solids vs. Liquids
04-11-14
Solids vs. Liquids

Changing the order of fields in an internal table

Hi all,
I'm using field symbol as internal table. this table has got a standard database structure.
I want to make the 3rd column of this internal table as 1st colums keeping rest of the columns as it is.
Is there any way to do this?
Thanks,
Anil.

Hi
Instead of directly taking the type as a standard structure , declare the FS internal table as type of types structure.
Data: fs_scarr like type_s_scarr.
FIELD-SYMBOLS <scarr2> TYPE fs_scarr
In the types put the third column as first one and use into corresponding in select query
or else
while displaying the internal table change the order of the columns
Loop at itab into fs_itab.
write : col3
col2
col4
endloop.
Thanks,
Viquar Iqbal

Change the Order of Fields in the Search Lookup Form

Hi guys,
The end user has requested me to change the order of the fields in the Search Lookup Form. I haven't found any configuration to change this order, so I changed the JSP (tjspLookupFormTiles.jsp) as below:
<bean:define id="colIDsObj" name="lookupFieldForm" property="columnIDs"/>
<%
//Sort Column IDs
String[] colIDs = (String[]) pageContext.getAttribute("colIDsObj");
colIDs[0] = "Lookup Definition.Lookup Code Information.Decode";
colIDs[1] = "Lookup Definition.Lookup Code Information.Code Key";
%>
Is there any property where I can change this order without change the JSP File?
Thanks,
Renato.

I had a similar requirement in the past, but could not find any other way for doing this. It does not reverse the order even for lookup fields on USR forms, for which the encode and decode values are defined in formmetadata.xml. Changing jsp seems to be the only way, unless someone else knows better.

Changing the order of report columns

Similar Messages

Maybe you are looking for