Changing to url mode

Hi,
The users to access the iViews need some autorizations, however i tested with SAP_ALL still it does not display. The connection should be okie because it prompt me for password when i try to access the iView. After i enter the username and password, the iView just seem like hanging there with the hour glass running.
Those iView that are not able to display are already in URL mode.
Thanks
Regards,
Message was edited by:
shaik v

Hello Guys,
I have same problem and i am with BW 3.0b service pack 26.
So Can any one give me the exact sytax of the URL to call the precalcuated webtemplate which was scheduled using Reporting agent with variant .
Because i am getting error " No precalculated data found for data provider <dataprovider name>" when i am trying to call using below URL
http://<BWapplication server url>/sap/bw/BEx?cmd=LDOC&template_id=<template technical name>&variant=z_usoo&DATA_MODE=stored
Z_US00 is the name technical name of the variant i used in the reporting agent.
Please let me know if i am missing some thing

Similar Messages

How to change Workspace URl in 11.1.2.3 and change the image in login

I recently upgraded to 11.1.2.3 Everything works fine but the Planning Application is not working from the regular URL. We have a custom URL where it does not shows the server name When I try to access it with the regular URL with the server name it works fine. I want to know if there is a way that I can change the URL to custom I want to know if there was a way to change the login image in the workspace This is for Version 11.1.2.3

Check below blog for workspace image change:
http://www.orahyplabs.com/2012/01/customizing-epm-workspace-1112.html
Also, check *mod*.conf file for port number of planning, it will be under ORACLE_INSTANCE/httpconfig/config/OHS/ohs_component.
Hope this resolve your issue!
Cheers!
Sh!va

ABAP Web Dynpro Application changes in Administation Mode no longer working

Hi Gurus,
To apply customizing to a standard SAP Web Dynpro application we used to simply run the application in administration mode. After we changed a parameter to allow for theme application this adminstration mode no longer works. Right-Click simply acts as if you are running the application normally. We have tried to remove our parameter but this had no effect.
How can we "fix" this error without creating a new custom configuration which will cause the URL to change?
Thanks,
Garth

Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya.

I have firefox 7.0 and i go to about:config and change the URL default from bing to google but when i close firefox an open it back up it changes back to bing why is this?

I have firefox 7.0 and i go to about:config and change the URL default from bing to google but when i close firefox an open it back up it changes back to bing why is this? I stand by google 100% and if ur gonna make it where i can't use google as the URL's seach engine then i will uninstall it.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Change relative URL of segments for HLS-VOD

Simple Version:
Can I change the URL of the TS segments delivered by the hlshttp_module in any way, or is it always relative to the requested m3u8 URL?
Long Version:
To try and protect my content from being accessed by third parties I want to use mod-auth-token, with a client inserted token in the request for the variant m3u8, and a server generated token in the HLS m3u8.
My clients generate a token using a shared secret, and request the variant m3u8 from:
https://myserver/hls-manifest/<clienttoken>/<hextime>/path/to/folder/manifest.m3u8
This page is served dynamically (using php), and does not really have anything to do with FMS even though it is running in the same Apache instance. The m3u8 is generated with server tokens in the m3u8 URLs somethign like this:
#EXTM3U
#EXT-X-STREAM-INF:PROGRAM-ID=1,BANDWIDTH=10240000,CODECS="mp4a.40.2, avc1.42001f"
https://myserver/hls-vod/dc226454b9e39b9ffc44f9496505c70e/4ea6963f/path/to/folder/filename _1024k.mp4.m3u8
I have installed mod-auth-token, and configured it on a LocationMatch for "^/hld-vod/(.*)\.m3u8$". Everything up to this works perfectly, and I can request both m3u8 playlists successfully. The problem is that the content of the m3u8 (the ts fragment URLs) are relative to the URL of the m3u8.
#EXTM3U
#EXT-X-MEDIA-SEQUENCE:0
#EXT-X-ALLOW-CACHE:NO
#EXT-X-VERSION:2
#EXT-X-KEY:METHOD=AES-128,URI="https://myserver/hls-key/vodkey.bin",IV=0X560417e9155f2f2cb1fb9410397db72e
#EXT-X-TARGETDURATION:10
#EXTINF:10,
filename_1024k.mp4Frag1Num0.ts
The player is attempting to request files from:
https://myserver/hls-vod/dc226454b9e39b9ffc44f9496505c70e/4ea6963f/path/to/folder/filename _1024k.mp4Frag1Num0.ts
I want this to look more like this:
https://myserver/hls-vod/path/to/folder/filename_1024k.mp4Frag1Num0.ts
or even this:
http://mycacheserver/hls-vod/path/to/folder/filename_1024k.mp4Frag1Num0.ts
So the m3u8 needs to look more like this:
#EXT-X-TARGETDURATION:10
#EXTINF:10,
http://mycacheserver/hls-vod/path/to/folder/filename_1024k.mp4Frag1Num0.ts
I can think of lost of placeswhere this would have useful applications. There does not appear to be anything in the Developer documents which would help here. Does anybody have a suggestion for something I can try?

Hi Michael,
Thanks for using FMS 4.5 and its new features.
However, there is no way to not to put relative urls for the ts files. However, you might like to do either Apache's "URL rewriting rules" or redirection . For rewriting rules, you might check http://httpd.apache.org/docs/2.0/misc/rewriteguide.html
Though, you may suffer in caching benefits. Here, if the id that you have inserted is on per client basis, you may not get the caching benefits on the caching server as it will always caching on basis of
https://myserver/hls-vod/dc226454b9e39b9ffc44f9496505c70e/4ea6963f/pat h/to/folder/filename_1024k.mp4Frag1Num0.ts
while, if you use client side redirect something like
redirect 301 url1 url2
it may help. You might consider other similar solutions for example, client redirect on proxy servers etc.. just be ware of caching in your case (if applicable)

How do I use Sun Web Server 7.0u1 reverse proxy to change public URLs?

Some of our installations use the Sun Web Server 7.0 (update 1, usually)
for hosting some of the public resource and reverse-proxying other parts
of the URI namespace from other backend servers (content, application
and other types of servers).
So far every type of backend server served a unique part of the namespace
and there was no collision of names, and the backend resources were
published in a one-to-one manner. That is, a backend resource like, say,
http://appserver:8080/content/page.html would be published in the internet
as http://www.publicsite.com/content/page.html
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.
Another quest, possibly related in solution, was to make a tidy url for the
first page the user opens of the site. That is, in the current solution when
a visitor types the url "www.publicsite.com" in his or her browser, our web
server returns an HTTP-302 redirect to the actual first page URL, so the
browser sends a second request (and changes the URL in its location bar).
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
So far I found that I can't solve these problems. I believe these problems
share a solution because it relies on ability to control the actual URI strings
requested by Sun Web Server from backend servers.
Some details follow, now:
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
[04/Mar/2009:21:45:34] finest (25095) www.publicsite.com: for host xx.xx.xx.83
trying to GET /content/MainPage.html while trying to GET /test, func_exec reports:
fn="service-passthrough" rewrite-host="true" rewrite-location="true"
servers="http://10.16.2.127:8080" Directive="Service" DaemonPool="2b1348"
returned 0 (REQ_PROCEED)My obj.conf file currently has simple clauses like this:
# this causes /content/* to be taken from another (backend) server
NameTrans fn="assign-name" from="/content" name="content-test" nostat="/content"
# this causes requests to site root to be HTTP-redirected to a certain page URI
<If $uri =~ '^/$'>
    NameTrans fn="redirect"
        url="http://www.publicsite.com/content/MainPage.html"
</If>
<Object name="content-test">
### This maps http://public/content/* to http://10.16.2.127:8080/content/*
### Somehow the desired solution should instead map http://public/data/* to http://10.16.2.127:8080/content/*
    Service fn="service-passthrough" rewrite-host="true" rewrite-location="true" servers="http://10.16.2.127:8080"
    Service fn="set-variable" set-srvhdrs="host=www.publicsite.com:80"
</Object>
I have also tried "restart"ing the request like this:
    NameTrans fn="restart" uri="/data"or desperately trying to set the new request uri like this:
    Service fn="set-variable" uri="/magnoliaPublic/Main.html"Thanks for any ideas (including a statement whether this can be done at all
in some version of Sun Web Server 7.0 or its opensourced siblings) ;)
//Jim

Some of our installations use the Sun Web Server 7.0 (update 1, usually)please plan on installing the latest service pack - 7.0 Update 4. these updates addresses potentially critical bug fixes.
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.> now, if all the resources are under say /data, then how will you know which pages need to be sent to which back end resources. i guess, you probably meant to check for /data/page.html should go to <back-end>/content/page.html
yes, you could do something like
- edit your corresponding obj.conf (<hostname>-obj.conf or obj.conf depending on your configuration)
<Object name=¨default¨>
<If $uri = ¨/page/¨>
#move this nametrans SAF (for map directive - which is for reverse proxy within <if> clause)
NameTrans.. fn=map
</If
</Object>
and you could do https-<hostname>/bin/reconfig (dynamic reconfiguration) to check out if this is what you wanted. also, you might want to move config/server.xml <log-level> to finest and do your configuration . this way, you would get enough information on what is going on within your server logs.
finally,when you are satisfied, you might have to run the following command to make your manual change into admin config repository.
<install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
you might want to check out this for more info on how you could use <if> else condition to handle your requirement.
http://docs.sun.com/app/docs/doc/820-6599/gdaer?a=view
finally, you might want to refer to this doc - which explains on ws7 request processing overview. this should provide you with some pointers as to what these different directives mean
http://docs.sun.com/app/docs/doc/820-6599/gbysz?a=view
>
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
please check out the rewrite / restart SAF. this should help you.
http://docs.sun.com/app/docs/doc/820-6599/gdada?a=view
pl. understand that - like with more web servers - ordering of directives is very important within obj.conf. so, you might want to make sure that you verify the obj.conf directive ordering is what you want it to do..
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
now, you are in the totally wrong direction. web server 7 includes a highly integrated reverse proxy solution compared to 6.1. unlike 6.1, you don´t have to download a separate plugin . however, you will need to manually migrate your 6.1 based reverse proxy settings into 7.0. please check out this blog link on how to set up a reverse proxy
http://blogs.sun.com/amit/entry/setting_up_a_reverse_proxy
feel free to post to us if you need any futher help
you are probably better off - starting fresh
- install ws7u4
- use gui or CLI to create a reverse proxy and map one on one - say content
http://docs.sun.com/app/docs/doc/820-6601/create-reverse-proxy-1?a=view
if you don´t plan on using ws7 integrated web container (ability to process jsp/servlet), then you could disable java support as well. this should reduce your server memory footprint
<install-root>/bin/wadm disable-java user=admin config=<hostname>
<install-root>/bin/wadm create-reverse-proxy user=admin uri-prefix=/content server=<http://your back end server/ config=<hostname> --vs=<hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
now, you can check out the regular express processing and <if> syntax from our docs and try it out within <https-<hostname>/config/<hostname>-obj.conf> file and restart the server. pl. note that once you disable java, ws7 admin server creates <vs>-obj.conf and you need to edit this file and not default obj.conf for your changes to be read by server.
>
I have also tried "restart"ing the request like this:
NameTrans fn="restart" uri="/data"
ordering is very important here... you need to do this some thing like
<Object name=default>
<If not $restarted>
NameTrans fn=restart uri from=/¨ uri=/foo.
</If>

How to change the URL

Hi All,
I have created a web dynpro application and now I need to change the URL of this application to some basic message type URL for eg:
let's say our URL is "http://testdoc/post?mssg" and I now want to change this to as "OPEN DOCUMENT" and when user clicks on ""OPEN DOCUMENT" it will still direct to the original destination that is our original URL.
Thanks,
Rajat

I used the following syntax:
<A href="http://forums.sdn.sap.com/">display SDN</A
>
Edited by: rajatg on Oct 6, 2010 4:43 AM

How to change the URL of a URL-iView over Code ?

Hi all,
i am getting started with the Portal-Application-Developement and want to change the URL of an URL-iView on runtime with java-code.
i have read the context and can get the Property url with this statement.
endContext.getProfile().getProperty("url")
But if i change this property, nothing is done.
endContext.getProfile().setProperty("url", "http://www.yahoo.com");
Where is my fault.
Thanks for help.
Regards Jürgen

Hi,
the context is of Type IPortalComponentContext.
I cant find no method getParameter() at the context or the profile.
The methods to read the properties of the URL-iView are
context.getProfile().getProperty("url")
context.getProfile().getAttributeValue("url")
But if i want to set (change) this attribute, nothing is done.
Regards Jürgen

How to Change attachment URL on a Purchase Req?

Attachments in the EBP shopping carts are transferred to an ITS server and are linked to a back end R/3 Purchase Requisition.
Note that the attachments are physically stored on ITS server and the link (URL) to the attachment and Purchase Req is stored in SAP.
As a part of decommissioning, the server which was used for storing attachments is replaced with a new server and all the attachments are moved to new server.
Since the link associated to the Purchase Req and attachment is not changed, when user is trying to open the Purchase Req attachment, it is not displaying becuase all the attachments are moved to new server.
How to change the link (URL) in the Purchase Req so that it will point out to the new server instead of old server.
Due to the following reasons manually changing the URL is not advisable.
1) 40,000 attachments link need to be changed.
2) System is not allowing to change the URL manually because of the user differences. All the attachment links are attached to Purchase Reqs by RFC user (since these are transferred from EBP environment).
Please advise what should be the feasible solution to change the URL (link) on the Purchase Req so that business can open the attachment with no issues.
Thanks in advance

According to SAP, since purchase order is a legal document they do not support the process of changing document number. They suggested I do the change with debug and replace at my own risk. In ME22N go to debug and type MEPO_TOPLINE-BEDAT. The values for this field show up as 29991231 that should be changed to 20191231 and press F8, then save the purchase order.

How can I change my URL in the iTunes store

I recently got approved by iTunes but have since changed the URL. How can I notify iTunes of this and get it changed as quickly as possible...thanx

You must add the itunes redirect tag within the <channel> element of your feed. Its doubtful that a 3rd party app would support this tag, but its possible. If you have access to the actual xml file, you can add the redirect feed manually using any text editor.
<itunes:new-feed-url>http://yournewdomain.com/podcast.xml</itunes:new-feed-url>
The itunes redirect tag simply tells iTunes users where your podcast has been moved to, and updates their local settings accordingly. The next time they visit your podcast, they will go directly to your new feed specified in the redirect tag.
For non-iTunes users, the itunes redirect tag doesn't help. Thats where the 301 redirect comes in, however it is a bit complicated depending on the type of host your podcast is on. If you don't want to tackle the 301 redirect, keep reading.
One method of updating non-iTunes users...if you can still post an episode to your old feed, then one option is to post a text file that directs people to your new feed. You could also post a brief audio clip stating the same thing. Leave this episode up for a couple of weeks and then kill your old feed.
<item>
<title>PODCAST UPDATE: Please Read!</title>
<link>http://yournewdomain.com/newfeed.txt</link>
<enclosure url='http://yournewdomain.com/newfeed.txt' type='text/plain' />
</item>

How can I get my installed plugins to show up in Logic after ive installed the plugin discs? ive tried changing the bit mode. it STILL doesn't work.???

I tried installing a program but when i open logic and scan the audio units, it doesnt come up. Even if i change the bit mode, it still doesnt show up. I even tried restarting my machine..Can anyone help me or give me some ideas.
i just wanna get this plugin to work.

Have you confirmed that the plug-in installed to one of the locations where Logic might find it? Most plug-ins go to /Library/Audio/Plug-ins/Components. Some (rarely) install to ~/Library/Audio/Plug-ins/Components (where "~" is your user folder). Look in both locations and see if the plug-in is actually there.
When installing plug-ins, if you are offered options as to what format to install, be sure to include Audio Units. Logic will not see other formats like VST, RTAS, AAX, TDM, etc. If you use other software that recognizes those formats, it's fine to install them too, just be sure you don't deselect Audio Units.
Finally, if you're sure the plug-in is installed to the right place, open the Audio Units Manager in Logic and check to see if the plug-in passed validation. Go to the main menu and choose Logic Pro > Preferences > Audio Units Manager. Check to see if your plug-in is listed there. If there's not a check mark next to it in the "Logic" column, that means it failed validation. If so, the "Compatibilty" column will tell you why. Keep in mind that if the AU is 32-bit, you have to launch Logic in 32-bit mode to see it here. Likewise, 64-bit plug-ins show up in the manager in 64-bit mode.

Is it possible to change the URL of an iTunes Podcast page itself (NOT the Feed URL)?

My company has an usual question:
While keeping all the individual podcasts the same, and the subject matter of the whole podcast series the same, my company would like to change the URL that Apple iTunes has assigned us. Is this possible, and how can it be done?
Again, I am talking about the URL that Apple iTunes has assigned us. The one that begins:
http://itunes.apple.com/us/podcast/career-...
We are having a small change in marketing emphasis. So my company wants to change one of the dashed English words in the URL, after:
http://itunes.apple.com/us/podcast/
These English words were based on the original title of our podcast. The original title of our podcast has changed slightly, with no problem. Now my company just wants to change the URL assigned to us by Apple.
Let me emphasize: There is no purpose of misdirection, evasion, or deceit here -- not in the slightest. My company is simply taking a different marketing angle. Our category is staying the same. The podcasts themselves are staying the same. My company would just like to update the URL assigned to us by Apple to reflect our new podcast series name.
ALSO:
We are a category-leading, very popular podcast. If we do change our iTunes podcast URL, we do not at all want to jeopardize our leading status in our podcast subject category. We want all our download stats to move with us over to the new URL. This is extremely important to us.
AND FURTHER:
If we do change our iTunes podcast URL, we want all our listeners to automatically find us at the new URL. We don't want any of them to lose their subscription because we changed our URL.
So in summary:
1. CAN we change our podcast URL (the one assigned to us by iTunes)?
2. Can we change the URL, but still keep our category-leading position and stats, exaclty as they are now? That is, will our old download stats move with us to the new URL, so we can retain our category-leading position?
3. Will podcast listeners going to the old URL automatically be forwarded to the new URL? Might any of our current listeners become unsubscribed as a result of the URL change?
I know this is an unusual, complicated, and multi-part question. I am looking for definitive, authoritative answers to all these questions.
Thank you very much for your help!!
David

You can omit the title altogether in the URL (together with the succeeding slash, of course). For example, my own podcast URL in the Store is
https://itunes.apple.com/gb/podcast/the-sound-of-78s/id166389425?mt=2
but this works perfectly well:
https://itunes.apple.com/podcast/id166389425
Indeed you can even put your own title:
https://itunes.apple.com/podcast/any_old_title/id166389425
So it's as simple as that!

Is it possible to change the URL of an application?

Hi All,
I was working with the oracle apex and created few applications almost a year back, due to my higher studies there is a gap with the tool..and finally I am in.
Am planning to create an application which will be similar like a personal website.My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
instead of having this big..
http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
Thanks
with Regards,
Ramya.

My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
instead of having this big..
http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
If you are just looking for a nice and short URL to start your application, why not just use a URL shortener service like goo.gl ?
Just put in your long URL and it will create a nice and short URL for you... for example, the above URL is now http://goo.gl/FijYxn
- Morten
http://ora-00001.blogspot.com

Is it possible to change the URL of the browser corresponding to changes in the timeline?

Hello,
I'm trying to create a whole website in Edge. Is it possible to change the browser URL for different sections of the animation. For example me.com/part1 leads to 2.0 seconds in the animation. And for example when you type me.com/part2 the browser would go to 4th second of the animation. And vice versa, when the animation reaches the 4th second the browser URL would change to me.com/part2. It would be really great if that were possible. Any ideas on how to accomplish it?
Thanks!

Hi there, Joel's example seems to be exactly what you're trying to do. All you need to do is replace his functions with your functions.
There are two main parts to his example: 1) reacting to a URL change directly in the URL bar, 2) reacting to a button click, and setting the URL
Regarding Item 1: this line (this adds a listener for when the URL hash is changed, and calls the 'sym.animate' function in his example). Note that he is linking the value after the # with the symbol names 'panel1', etc. This line enables the functionality for you to be able to directly change the URL to: testStep95.html#panel2, and the site will change pages.
$(window).on("hashchange", function(){sym.animate(location.hash.replace("#",""), sym.onStage)});
Regarding Item 2: he's setting the page title (based on the active panel symbol) and URL hash, in the 'sym.animate' function. He calls the 'sym.animate' function on click of btn1, btn2, btn3:
document.title = panelIn;
window.location.hash = panelIn;
Props to Joel for his slick example!

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the SearchText and IF statements that change the URL depending on what is typed?

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the searchTerms and IF statements that change the URL depending on the searchTerms? Every time I try to add something firefox doesn't want to add it as a search plugin. I need to create a more powerful search tool for personal use.

I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

Changing to url mode

Similar Messages

Maybe you are looking for