Channel length too short for calculation

I've just switched from 9.1 to 2010 and I was told that our VBS scripts wouldn't need updating - not so it seems.
I have the following piece of code:
Call ChnAlloc("Input PSD") 
L1=Cno("RealPart")
L2=Cno("ImaginaryPart")
Call FormulaCalc("Ch('Input PSD'):=Ch(L1)^2+Ch(L2)^2")
but this doesn't work anymore. I get an error message saying that channel 7 (Input PSD) is too short for calculation. Previously I would have checked the data matrix but I can't find this anymore so I assume DIAdem works in a different way know. The help files suggest that the channel length option for ChnAlloc is optional so I don't understand why it thinks the channel is too short.
Any help appreciated.
Thanks, Si.

Hi SI,
You only need a minor addition, and you get the benefit that all new channels can have their length(s) dynamically changed.  Please add this line of code after creating the channel and before the FormulaCalc() command:
ChnLength("Input PSD") = NeededNumberOfRows
Back in the dark days of the DIAdem memory matrix, DIAdem would by default launch with 60 static channels of exactly 8196 rows each.  As you apparently know, you could customize the memory matrix to have fewer or more channels, and you could change their static lengths assigned when DIAdem launched.  The fully dynamic channel lengths are a vast improvement, but it does mean that for FormulaCalc() commands you need to tell the channel to be big enough first.  Interestingly, none of the ANALYSIS commands require you to do explicitly set the channel length before writing to them-- just the channel calculator.
Ask if you have any further trouble,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

  • ChnEnvelopes gives error "Target Channel is too short for results"

    I have 3 channels (1-3) of data loaded, 1 is time, the other 2 are data channels. I am trying to run ChnEnvelopes from within VBS with this command.
    call ChnEnvelopes(1,2,4,5,6,7,5)
    The size of the original data is 34127.
    If I use the dialog it works fine.

    Hi,
    When you perform calculations in DIAdem, the results will be stored in a channel in the data matrix. When you load a data file, it will occupy a channel for each data channel in the file. If the data channels in the file are longer than the maximum channel length selected in the DIAdem settings, DIAdem will use 'dynamic' channels versus the channels you have configured in the settings menu.
    There are two things you can do:
    1. Go to the 'Window' menu in DIAdem and select 'Close all'.
    2. Then select the 'Settings' menu and choose 'Data management'.
    3. Click the 'Data Matrix' button and set the maximum channel length to something larger then your channel length (i.e. >= 34,127). The default value here is 8,192.
    Another way to do this is to use dyn
    amic channels for the calculation, i.e. use this command:
    call ChnEnvelopes(1,2,,,,,5)
    Altough the result channels are shorter than 34,127, the software will use these channels for some temporary data storage.
    This should hopefully work for you. Let me know if you have any additional problems or questions.
    Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Apple Watch band is too short for me

    I've checked out size of band for Apple Watch and all of these model are too short for me. Even Classic Buckle that is the longest type of band in all family is still not fit. My wrist size is 230mm. Feel so sad...... Hope Apple will made longer band size in the next gen.

    Let me try this again. (This is for a stainless 38).
    I saw the specs on the band. I tried to use a tape measure to determine if it would fit, and I should have had help as that is hard to do alone. But is seemed alright, and I ordered the watch.
    I am a watch junkie. I have never had a problem like this. You come to expect a certain "standard" when you buy a watch, and ALL of my watches have a longer
    strap, and I guess (Shame on me) I assumed so would the Apple Watch.
    The band fits, so to speak, but the part that is left after you pass it though the buckle, is not long enough, and the band keeper-loop thingey does not have enough band to keep it in place. Therefore you are constantly having to slide the loop back over it to keep it in place.
    I could send it back, but you might imagine how I feel about that. I made sure I got mine on the 24th because I stayed up and ordered it right after midnight on the 10th. I really wanted the watch.

  • ORA-09100 specified length too long for its datatype with Usage Tracking.

    Hello Everyone,
    I'm getting an (ORA-09100 specified length too long for its datatype) (a sample error is provided below) when viewing the "Long-Running Queries" from the default Usage Tracking Dashboard. I've isolated the problem to the logical column "Logical SQL" corresponding to the physical column "QUERY_TEXT" in the table S_NQ_ACCT. Everything else is working correctly. The logical column "Logical SQL" is configured as a VARCHAR of length 1024 and the physical column "QUERY_TEXT" is configured as a VARCHAR2 of length 1024 bytes in an Oracle 11g database. Both are the default configurations and were not changed.
    In the the table S_NQ_ACCT we do have record entries in the field "QUERY_TEXT" that are of length 1024 characters. I've tried various configuration such as increasing the the number of bytes or removing any special character but without any sucess. Currently, my only possible workaround is reducing the "Query_Text" data entries to roughly 700 characters. This makes the error go away. Additional point my character set to WE8ISO8859P15.
    - Any suggestions?
    - Has anyone else ever had this problem?
    - Is this potentially an issue with the ODBC drive? If so, why would ODBC not truncate the field length?
    - What is the maximum length supported by BI, ODBC?
    Thanks in advance for everyones help.
    Regards,
    FBELL
    *******************************Error Message**************************************************
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 910, message: ORA-00910: specified length too long for its datatype at OCI call OCIStmtExecute: select distinct T38187.QUERY_TEXT as c1 from S_NQ_ACCT T38187 order by c1. [nQSError: 17011] SQL statement execution failed. (HY000)
    SQL Issued: SELECT Topic."Logical SQL" saw_0 FROM "Usage Tracking" ORDER BY saw_0
    *******************************************************************************************

    I beleieve I have found the issue for at least one report.
    We have views in our production environment that call materialized views on another database via db link. They are generated nightly to reduce load for day-old reporting purposes on the Production server.
    I have found that the report in question uses a view with PRODUCT_DESCRIPTION. In the remote database, this is a VARCHAR2(1995 Bytes) column. However, when we create a view in our Production environment that simply calls this materialized view, it moves the length to VARCHAR2(4000).
    The oddest thing is that the longest string stored in the MV for that column is 71 characters long.
    I may be missing something here.... But the view that Discoverer created on the APPS side also has a column length for the PRODUCT_DESCRIPTION column of VARCHAR2(4000) and running the report manually returns results less than that - is this a possible bug?

  • Clips too short for transistions?

    i am adding images to my movie from the photos tab and when i add a transistion between them, it says clip too short for transistions. now why is that? i added transistions between other images in the beginning, so why is it giving me problems right now?

    Well then how come when i click apply on the ken burns setting for the picture, it shows 9:01, sometimes 10:01, then i add the transistion, and it says too small.. heres the new thing that just happened, i added a reflection theme and added an image in the drop zone.. now when i add a transistion right after it to a clip that shows 10:12, it says the previous clip must have a duration of 9:01. the theme itself shows 7:01.. so how do i change the duration of the theme?

  • Multiple 30" Cinema Displays, cable length too short

    I have two 23" Cinema Displays, and they work great! Power adapters have long clean leads and can put them away from my G5 and place the displays where I want. Then I bought a 30" Cinema Display to try in prep for a "Nehalem" machine. I discovered that the power adapter has to be 6 inches away from the back of the computer and the monitor cable is SHORT. I want to use two 30" displays, but the cables are too SHORT and I don't want those two white bricks (power adapters) behind a new Nehalem. Apple says you can run up to eight 30" displays, with the necessary video cards, but no mention how to reach the second display let alone the 8th display!! Does Apple have cables in a male-female configuration? I have looked at Gefen.com and their extensions are Male-Male for the Apple Combo Extension Cables for dual link (30"). I could say demeaning things right now, but I won't.

    Thank you for the quick reply, I can place the power adapter where I want with your solution. You would have posted if you knew about an extension with an "elegant breakout for connection to DVI, USB and FireWire ports" but I will still ask if you know of that kind also so that all monitors have USB and FireWire.

  • Aux cable for Mini Cooper too short for Iphone.

    Just purchased a Mini Cooper and the AUX cord that connects the Iphone to the Bluetooth is too short to reach my vehicial mount.  I need a longer cord or an extention.  Anyone have any ideas?

    You said it was an aux cable. nothing you said indicated it was proprietary in any way. If it is not an aux cable, but a dock cable, those are usually proprietary to the auto manufacturer. If they don't have anything, try e-bay, but beware the cheap chinese junk out there.

  • Charge cord too short for Lumia 900.

    The charge cord for the Lumia 900 should be a little longer.  Even with the plugin right off the side of my bed the charge cord is not long enough for me to be able to read off of my Lumia 900 without needing to unplug my phone from the charger.  (To read news articles the phone has to be in the portrait orientation with the Windows home button at the bottom.  My Samsung Focus charge cord length was long enough. 
    -Paul
    Solved!
    Go to Solution.

    Thanks Kosh and Android for the replies.
    Basically the usb charge cord supplied by Nokia for my Lumia 900 is not long enough to be able to charge and use the phone at the same time. (My battery usually doesn't last a full day.) Nokia supplies a short cord compared to other manufacturers. I believe the charge cord supplied should be longer to equal what other brands supply.
    I would buy a longer usb charge cord but Nokia does not offer one and I am concerned I may not find a good quality one and it may wear out the usb port on my phone prematurely. Plus I will be upgrading my phone soon.
    -Paul

  • IMovie '09 dv video capture clip length too short

    I have a Sony DV video camera connected to my Mac with a firewire cable.  When I do a video capture on most of my videos, everything is fine.  On others, it captures about 1000 unique video clips for a minute or two of video.  I get 1000 clips ranging from 0.1 seconds to maybe 1.5 seconds in length.  Has anyone seen this?  Any ideas whats causing it?

    You can always download the free trial version of Veescope Live and try capturing with that.  Just connect your camera to your computer, start Veescope Live, click the camera input, press play on your camera and then press the record button on Veescope Live.

  • ORA-28234 - Key length too short

    What would cause ORA-28234 to be raised by the show engine? I occasionally get this error during development, quite random and not reproducible.
    Thanks

    Something like that. Like I said, it is very inconsistent, not reproducible at all. The app doesn't have a login page, it uses the mod_ntlm and associated page sentry function, the same function my app (24317) on the hosted site uses.
    What is your diagnosis, Dr. Scott? :-)

  • Firefox keeps timing out after 10 seconds. this is too short for big sites, how can I change this?

    I regularly use a very busy download site and find that Firefox closes me out of any part of the site, not just the current tab, when it times out after a max.10 seconds - seems less! I want to be able to allow the page to continue loading until it opens - because it will, just not in 10 seconds during busy times.

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing the cookies doesn't help then it is possible that the file ''cookies.sqlite'' that stores the cookies is corrupted.
    You can rename (or delete) '''cookies.sqlite''' (cookies.sqlite.old) and delete '''cookies.sqlite-journal''' and '''cookies.txt''', if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case cookies.sqlite got corrupted.
    See [[Cannot log in to websites]] (Remove corrupt cookies file) - See also http://kb.mozillazine.org/Websites_report_cookies_are_disabled (Other Solutions)

  • FMDependency field too short in Sharepoint

    Hi,
    we are using FM10 with Sharepoint 2010.
    It works fine, generally speaking, but we are running into an issue with the field FMDependency.
    The field is created automatically when a FM10 file is uploaded. However it is too short for the kind of dependencies we have and it issues an error when we modify other metadata in Sharepoint and save the item.
    is it possibile to change the length of this field ? Where and how ?
    Thanks for your support
    Carlo Tognoni
    Milano - Italy

    I have not tried this myself, but I am concerned in case the problem affects us one day. If you follow this suggestion, please let us know how it goes.
    In SharePoint:
    Site Actions > Site Settings > Site Administration: Site Libraries and lists > Customize [your DITA list].
    Scroll down to the Columns section and select FMDependency.
    In the Additional Column Settings section, set Allow unlimited length in document libraries to Yes.
    My reference for this was http://sharepoint.stackexchange.com/questions/14195/more-than-255-characters-in-multiple-l ines-of-text
    Alternatively, you could try increasing the Number of lines for editing on the same page.

  • Occasional Task Sequence fail (1 out of 5) with Error 615 Your Password is too short

    We have a task sequence that fails to install software and updates with an error liek this: Operation System Error 615: The password you provided was too short for the computers password policy. Please provide a longer password.
    With all software installations I always tick the continue on failure. Consequently in a task sequence you see the entire list of installation requirements fail with this error. This includes Applications, Packages and Software Updates. Without any amendment,
    the next time it is run, it runs successfully. Add to this the issue that the task sequence no longer displays the progress bar after rebooting into windows (x64) and it all points to the OSD process being a bit flaky.
    By the way, we are installing Win7 x64 (No x86 anymore) over PXE.
    So any pointers with this would be very gratefully received. 
    Anthony Sheehy - MCP, MCITP

    Here is the status message sent to Configuration Manager:
    The task sequence execution engine failed executing the action (Freefall Sensor) in the group (Install) with the error code 2278559764
    Action output: 7"'
    Verified policy is compiled in 'root\ccm\policy\machine' namespace
    content location count = 1
    Invoking Execution Manager to install software
    FALSE, HRESULT=87d01014 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\installsoftware.cpp,251)
    0, HRESULT=87d01014 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\installsoftware.cpp,764)
    Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\WGS00137
    reference count 1 for the source C:\_SMSTaskSequence\Packages\WGS00137 before releasing
    Delete source directory C:\_SMSTaskSequence\Packages\WGS00137
    Released the resolved source C:\_SMSTaskSequence\Packages\WGS00137
    pInstall->Install(sPackageID, sProgramName), HRESULT=87d01014 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)
    Failed to invoke Execution Manager to Install Software for PackageID='WGS00137' ProgramID='Silent Installation' AdvertID='WES20013' hr=0x87d01014
    InstallSoftware failed, hr=0x87d01014
    Install Software failed, hr=0x87d01014. The operating system reported error 615: The password provided is too short to meet the policy of your user account. Please choose a longer password.
    And here's the group policy that is applied to that OU:
    Enforce   password history
    0   passwords remembered
    Maximum   password age
    0   days
    Minimum   password age
    0   days
    Minimum   password length
    0   characters
    Password   must meet complexity requirements
    Disabled
    Of course, the password complexity issue is a non-starter: How come SCCM 2007 task sequences did not have the same problem? Why does the Task Sequence work
    sometimes and not others. All passwords I provide to Configuration Manager all conform to complexity rules anyway.
    The relevant SMSTS.log portion is below:
    <![LOG[Variable name: _SMSSWDProgramName]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Action command line: smsswd.exe /pkg:WGS00137 /install /basevar: /continueOnError:]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:522">
    <![LOG[Adding instruction at 90]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:524">
    <![LOG[
    Parsing step node: Applications]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:458">
    <![LOG[Description: ]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:462">
    <![LOG[ContinueOnError: true]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:466">
    <![LOG[SuccessCodeList: 0]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:474">
    <![LOG[(__hrMethodRetVal == ((HRESULT)0L)) || (bFailIfMissing == false), HRESULT=80070002 (e:\NTS_SCCM_RELEASE\sms\common\inc\ccmxml.h,582)]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="0" thread="1804" file="ccmxml.h:582">
    <![LOG[No condition is associated with the step.]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:670">
    <![LOG[Disable: ]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:483">
    <![LOG[Run in attribute: FullOS]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:491">
    <![LOG[Timeout: ]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:495">
    <![LOG[DefaultVarlist found]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:579">
    <![LOG[Variable name: OSDApp0Description]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp0DisplayName]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp0Name]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp1Description]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp1DisplayName]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp1Name]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDAppCount]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Action command line: smsappinstall.exe /app:ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_28f01c04-7229-4152-85e2-f2f43daf92b2,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_382fdd99-2228-452d-a6f0-63e543ce628d /basevar: /continueOnError:True]LOG]!><time="18:06:06.660-60"
    date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:522">
    <![LOG[Adding instruction at 91]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:524">
    <![LOG[
    Parsing step node: Language Packs]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:458">
    <![LOG[Description: ]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:462">
    <![LOG[ContinueOnError: true]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:466">
    <![LOG[SuccessCodeList: 0]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:474">
    <![LOG[(__hrMethodRetVal == ((HRESULT)0L)) || (bFailIfMissing == false), HRESULT=80070002 (e:\NTS_SCCM_RELEASE\sms\common\inc\ccmxml.h,582)]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="0" thread="1804" file="ccmxml.h:582">
    <![LOG[No condition is associated with the step.]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:670">
    <![LOG[Disable: ]LOG]!><time="18:06:06.660-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:483">
    <![LOG[Run in attribute: FullOS]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:491">
    <![LOG[Timeout: ]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:495">
    <![LOG[DefaultVarlist found]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:579">
    <![LOG[Variable name: OSDApp0Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp0DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp0Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp1Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp1DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp1Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp2Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp2DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp2Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp3Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp3DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp3Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp4Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp4DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp4Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp5Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp5DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp5Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp6Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp6DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp6Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp7Description]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp7DisplayName]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDApp7Name]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Variable name: OSDAppCount]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:620">
    <![LOG[Action command line: smsappinstall.exe /app:ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_9df3ec9a-e691-4106-b274-46c4c6c319b9,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_42e28566-b339-4773-92cf-05b8e748d996,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_305b4a34-0b5a-46fe-82dd-c57a5897e063,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_379afca3-f48e-486b-8848-296223481edd,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_502bf2db-e1c8-42ac-a499-61320d661cc3,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_455a6de9-fe98-47ed-8dab-e860dd4681ed,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_1707c97e-b4bb-4827-9117-02e79435213e,ScopeId_69AC7FA1-9E68-49C4-8D43-9BA17630A64D/Application_a17f2337-ad2e-42cb-9813-c9e167a85050
    /basevar: /continueOnError:True]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:522">
    <![LOG[Adding instruction at 92]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:524">
    <![LOG[Processed all elements]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:333">
    <![LOG[Adding end group instruction at 93]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:402">
    <![LOG[The next instruction after group will be at 94]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:408">
    <![LOG[
    Parsing step node: Opt In to CEIP and WER]LOG]!><time="18:06:06.676-60" date="05-28-2012" component="TSManager" context="" type="1" thread="1804" file="tsxml.cpp:458">
    Anthony Sheehy - MCP, MCITP

  • Is LED display video cord too short to use with Mac Pro?

    I've seen the new 24-in cinema display used with a macbook and noted how short the cord is. Now I'm thinking of getting the new Mac Pro with that same display but won't the cord be too short for me to set the tower near the floor on the side of my desk? I don't want to have to set that tower ON my desktop just so the connector will reach the minidisplay port.
    Any thoughts?

    I have exactly this set up, and it (just) works for me.
    The cable is about 42" from the back of the monitor to the three connectors at the other end, which allows me to have the Mac Pro on the floor, and the monitor on my desk. Obviously, it will depend on your desk height, cable access, etc., but it was a bit of tight fit, so you might want to get out a tape measure and see it will work for you.

  • Key Lenght too short error with dbms_crypto.encrypt

    Hi Friends,
    I am getting above mentioned error with dbms_crypto.encrypt.
    I had created a thread in technology --> security forum but i am not getting any help from there.
    ORA-28234 Key Length too short with dbms_crypto.encrypt
    Appreciate if anyone help me resolve this issue.
    Thanks
    AT

    Hi Warren,
    Yes function is compiled without any compilation error.
    Thanks
    AT

Maybe you are looking for

  • How do i uncheck multiple songs at the same time in my library?

    how do i uncheck multiple songs at the same time in my library?

  • Ripping DVD's to Watch

    I was looking to rip my DVD's to an external hard drive and was wondering if there was anyway for me to use Apple TV to play ripped DVD's? I want to make my entire collection on a hard drive so I can just scroll through and watch DVD's from the hd in

  • Default Currency Format

    I am sure there is a way to do this, but help-function does not help, and manual does not enlighten me. So how can I change the default currency from shown prefix.sterling to showing suffix.euros. Thanks, cannot do any productive before resolving thi

  • What are the events triggered in lsmw?

    what are the the events trigered in lsmw?

  • Enter and execute query in ADF

    Hi Experts, I am trying to implement Enter-Query/Execute-Query in adf and using Jdev 11.1.2.2.0. I put Find and execute operation on the form. When i press execute button i says me to enter value for mandatory fields. But i am try to execute query no