Chapter name not showing up in Scene Selection

I have an iMovie 9 project that has three chapters. I've used the Chapter Markers to delineate where they begin and what their names are.
I've sent the finished project to Media Browser and then I go to iDVD to burn the project successfully and all seems well.
The trouble is, the first chapter's name is not showing up in the Scene Selection. It's just listed as "The Beginning" instead of the name I've given it. I checked it in the preview function before I burn the DVD, and it's not there, either. The other two chapters' names show up successfully.
Can anyone help me here? Thanks.

I just made sure that the Chapter Marker was at the very beginning of the clip, and that seemed to have solved the problem.

Similar Messages

HT1451 Why do the song names and cd name not show up on the IPod Shuffle?

Why do the song names and cd name not show up on the Shuffle?

MysticChyk wrote:
Why do the song names and cd name not show up on the Shuffle?
Err this is no longer April 1st you know.
The iPod Shuffle has never had a 'display' on which track names can be shown. See http://www.apple.com/ipod-shuffle/ if you want an iPod which does have a display on which you can see the tracks names and even the album cover art then look instead at the bigger and more expensive iPod Nano http://www.apple.com/ipod-nano/ or iPod Touch http://www.apple.com/ipod-touch/
PS. The current iPod Shuffle even though it has no display on which it can show the track names can read them out loud to you using a voice-synthesiser this is the VoiceOver feature described on the iPod Shuffle product page I listed above.

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

The templates are not showing up after I select them???

the templates on pages are not showing up after I select them....unless I highlight the entire page and select a particular colour. That leaves all the colours in the photo off. Any help would be so very helpful.

CeraG - It will help to answer if you supply your system version, pages version and if you lately have done anything to the computer (installing, uninstalling etc)
I think you have forgotten to do a Software update or it could also be a font problem but more info from you is needed!

Picture names not showing in iphoto+mail

I recently updated to ilife ´08 and can´t figure out how to get the actual data names to show. I don´t sant to see titles,ratings and keywords.. I want to see the actual names of the pictures. Also when I hit the mail button in iphoto the pictures are put in the mail... without the pictures name. If I drag and drop the pics to a desktop folder the names ar5e of course correct. But many of the people I send mails to are not even aware how to drag and drop. If I send someone an email with 40 pictures to chose from,I want them to see the names underneath the pictures in the email without having to drag and drop. This was always how it worked in ilife ´07 and it makes choosing the pictures and telling me which ones they want in high quality a very easy process. I can´t even figure out how to sort the photos by "NAME". If there is no way to change it then I will be going back to the older version. Sometimes "improvement" is not a good thing.
Does anybody know how to do this?

When you select a pic to Email in the iPhoto Window and hit the email button you have the option to include title and comments with the photo.
Uploaded with plasq's Skitch!
In iPhoto you have two concepts that are related:
Title is a name that you give to a photo in iPhoto
Filename is the name of the file that contains the photo.
Which are you referring to when you say "name"?
Regards
TD

Finder does not show all colors from selected color Labels

Since a view days finder does not show all Color Label colors. When I select either yellow or green it is selected, but it does not show in the file list with details, I can see it in icon and 3 pane view, but not in the detail list view.
does anybody know why or how? Or what plist files I might need to delete to get this reset?

Create a new account, name it "test" and see how your labels work in that User acct in list view? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

LMS 4.2.3 variable name not show in drop-down list

Hi all,
I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
There is a default threshold template called "CPU Utilization" and "Memory Utilization".
After I choose either one, there should be one or two variable name in drop down list.
But I only see "Select MIB Variable" in the list.
I try to create a template with exact the same variable but still got nothing in the list.
The strange thing is that no all the default template has this problem.
I can see variable name under some template like "Device Availability" or "Port Availability"
And this is not browser problem because I try both IE and Firefox.
Any one how to solve this?

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

Elements 9 - Why does lens name not show up in photo info?

Why is the name of the lens used not showing up in the photo info? I have noticed this is happening with two of my lenses - Pentax-DA 35mm f2.4 and Pentax-DA L 50-200mm.

Please see below
SQL> create table test_ind( id number primary key) organization index;
Table created.
SQL> select count(*) from user_segments where segment_name ='TEST_IND';
COUNT(*)
         0
SQL> select * from user_tables where table_name ='TEST_IND';
TABLE_NAME                     TABLESPACE_NAME                CLUSTER_NAME                   IOT_NAME
TEST_IND                                                                                                            VALID
SQL> select constraint_name from user_constraints where table_name='TEST_IND';
CONSTRAINT_NAME
SYS_IOT_TOP_67764
SQL> select * from user_indexes where index_name='SYS_IOT_TOP_67764';
INDEX_NAME                     INDEX_TYPE                  TABLE_OWNER                    TABLE_NAME             TABLE_TYPE
SYS_IOT_TOP_67764              IOT - TOP                   SCOTT                          TEST_IND               TABLE

Blackberry Z10 Contact names not showing on incoming calls

My blackberry Z10 is not showing the contact names when I receive an incoming call. My country code also correctly selected. Contacts are not duplicated also. But contacts without the leading 0 is showing

Hi mhusni,
Welcome to the BlackBerry Support Community.
When using the country code included in the phone number field of contacts, you may not be able to see contact names on incoming calls even though the country code is correct.
This KB article may provide more information. "Caller ID does not show associated contact when country code is included in phone number" http://blackberry.com/btsc/KB33685
Let me know if you have any other questions.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

Server name not showing up in Chooser

mac OS 10.1.3 server. The server name is not showing up in the Chooser,. I can get to it by typing in the IP address, but this is a pain for my teachers.
It showed up for a long time, but now it will not show up.
Any ideas?

Apple talk is on the server and the clients. I also have another server that is connected to the same switch and it can be seen in the chooser. So I do not think it is a config problem with the switches or hubs. I have not changed anything (that I know of). I have researched this and can not find anything on it.

Account name not showing in 'Partners' Block for sold to party and ship to

Hi Experts,
I created a return order by confirming the Account.
Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
Thanks in Advance,
Kishore

Hi Experts,
I created a return order by confirming the Account.
Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
Thanks in Advance,
Kishore

Contact names not showing in messages, only number

nokia 6121 no names will show when ringing or recieving texts so I dont know who they are from etc, very frustrating, how do I change it to show the contact name not number? I cant find any settings to help me? thanks

Hi, In such case, try to check the things below:
1> Make sure all contacts are stored in unique memory : sim or phone memory (recommend phone memory)
2> Try to avoid 1 contacts has few numbers and other case, similar or same names for fews contacts
3> Add your country code into the normal number format, eg: 0123455678 --> saved as +60 12345678 (+60 is the country code for MY)
4> Check the settings under Contacts folder: Contacts > Settings > Contact view or Display contacts > try to change Last name/ First name view option one by one

ODBC data sources not showing up in datasource selection list

when I go to change datasources for a report, newly created ODBC connections do not show up. I noticed they are all in the odbc.ini file and listed under ODBC in the machine directory/software folder in the registry but not under the current user/software/odbc registry folder. Where does Business Objects/Crystal reports cache this information?

OK, then how do I set up a connection pool for a SQL Server database? At some point, I have to configure a connection pool. In the Call Interface dropdown, isn't ODBC the proper choice? Then, in the Data Source name dropdown, I should get some entries, right?

Blackberry Pearl 8120-contacts names not showing

I just upgraded to this phone and half the time when my phone rings contact names do not show up, just the phone number. What's going on?

Do you have those names/numbers in your BlackBerry Adress Book?
also, read this:
There could be any one of three solutions... Try these:
1. Make sure you set your own country code at Phone Dialer Screen > Options > Smart dialing.
Set your country code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
* In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
2. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
* For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
3. You may have "Content Protection" set on your Address Book.
Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Chapter name not showing up in Scene Selection

Similar Messages

Maybe you are looking for