Chapter one won't play

This is odd. I have several chapters in my movie (created in FCP). They all imported fine into DVD SP. I used a DVD SP template, everything works great in the simulator. I burned the disk as disk image. Everything plays fine on the computer. But when I put the DVD in a dvd player, the first chapter won't play. I get a disc error. However, if I play any of the other chapters, they work fine. Also, if I play chapter 2 and then just rewind a little I can see the footage from chapter one. I can even view it if I don't rewind too far. But if I rewind too far (to the beginning of chapt. 1) then I get another disc error.
Any ideas??
Thanks,
Michael

Welcome to the forum!
What did you set the 'First Play' for the disc to?
-DH

Similar Messages

  • Ipod Nano won't play any songs downloaded from MySpace pages...

    My first generation Nano was initially sent back to Apple due to the battery losing it's charge to quickly. They sent me back what appears to be a replacement Nano and now this one won't play any songs downloaded from MySpace pages of bands, shared from friends (unprotected mp3 files) or otherwise downloaded from the internet.
    Whats unusual is that any songs imported from a CD to the Nano play fine as do any songs purchased from iTunes. I know Apple has stated that any files the user wishes to play on their iPods will play as long as the format is compatible. (All of these songs in question played on the original Nano and the problems started when they said they fixed it and sent it back (although it is missing the engraving which to me indicates they gave me a refurbished Nano). My Applecare runs out in mid-October so I need to figure out what is wrong. I sent it back a second time and they told me they couldn't recreate the problem so they just updated the software and sent it back.
    Someone suggested that some iPods have a part of the firmware activated (which Apple may have been testing) that prevents any non-ITunes store music or music no t off an original CD to fail to play.
    When attempting to play downloaded songs from sites like Purevolume and MySpace the iPod plays for a few seconds then shuts down and restarts itself, all of these songs worked fine before Apple took it in for service.
    Any suggestions?

    Hello,
    I have exactly the same problem. It`s so annoying.
    I did a little bit research on this discussion board and this problem seems to be known for quite a long time. It`s confusing me Apple is not able to fix that prob or give customers quick introduction to resolve the prob.
    I am currently on vacation in Florida and just bought the new iPod 30 Gig. I transfered already songs from my music cd. That worked fine.
    I bought 2 music video files, synced them with no error to the iPod, but it only shows me a black screen when I want to start the video on the iPod itself. itunes plays the files with no problem.
    Any ideas how to fix it??
    DELL Latitude D800   Windows XP Pro  

  • TS1389 song won't play - keeps asking to authorize computer

    just bought 6 new songs.  only one won't play.  keep asking me to authorize the computer.  all the other songs & previous songs are fine.  how do i get the song to play?

    Click here and follow the instructions.
    (64322)

  • DVD won't play on windows computer  Ever see this prob?

    A potential client of mine says he can't play the DVD authored in DVDSP.
    "I have not been able to open the DVD and run it. It requires the CinePlayer DVD Decoder Pack 2.3.1-ESD.
    Is there another video program available to open the DVD?
    I have Windows XP but not this application."
    Has anyone run into this issue? The DVD I produced plays fine on stand alone DVD players, my Mac computers and the Window unit my partner in this project has.
    To me this sounds like a windows issue or this guy hasn't updated his OS, or he is trying to open the disc like a data disc and not play it like a movie DVD.
    I don't want to have probs mastering a boat load of these DVDs. These will be stamped copies so if the person has a DVD player aplication most issues like the above should go away right?
    Brad

    Brad - it's definitely down to the client to upgrade his software, nothing you can do about that one! Unless he is saying that he can usually watch DVDs using that software, but this one won't play, it sounds to me that he doesn't have any MPEG decoding hard or software installed.
    The other thing that springs to mind is that he should be able to alter the default application that WinXP uses for DVD playback. Again, this is something for him to address, not you... sounds like a case of needing to educate the client a little

  • IDVD won't play last chapter

    I just burned a DVD from iMovie 08 and it won't play the last chapter. It shows a red no entry symbol (circle with diagonal). The iMovie was about an hour 9 minutes long and at one point during the burn it said that it was too long. Is that the problem?

    Welcome to the forums!
    Is that the problem?
    Could be that you set the wrong encoding setting:
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • I received an ipod touch 5th gen for Christmas.  The first songs i've downloaded and synced with my touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them

    The first songs i've downloaded and synced with my new touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them.  I've tried unticking all the music that was on the ipod via itunes and re-syncing, which in theory should delete all music from my ipod.  It does except for the 5 ghost songs.   So at present I have no music on ipod except the 5 ghost songs.   Has anyone got any ideas how I can get rid of these?  
    I had no problems with my ipod touch 4th, which I had for years.   Any help would be great.  

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • A while ago I wanted to download/buy an album on my iPhone 4 but I didnt have enough space so I deleted some stuff and downloaded the album. well ever since then my other music won't play, only that one album will play and none of my other music will play

    a while ago I wanted to buy an album but I didn't have enough space on my phone, (iPhone 4) so I deleted some things off my phone and downloaded the album. well ever since then all my other music won't play, only that one album will play. I thought it was because I havent been able to get the software update on my phone but I don't have enough space for that either. I deleted almost all my photos, all my apps, i deleted almost all the info that is on the apps that you can't delete, but it says I have too much music and I only have 45 songs!!!!!!!! and I don't want to delete them because that's what I'm trying to listen to but I can't because of whatever reason. PLEASE HELP!!

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • Some of my songs in iTunes show up but they won't play. I get the message that my computer isn't authorized to play them when I only have one computer.

    I recently did the update for iTunes and after I did that I got the error message: MSVCR80.dll file not found.  I followed the suggestions from someone in this community to fix it and now some of my songs aren't playing.  And they are the ones that I purchased from iTunes not CDs that I have and ripped to my iTunes library. I can see the songs listed in my iTunes library as well as on my iPod but yet they won't play.  On my computer I get the message that this computer is unauthorized to play them and to authorize it.  I only have one computer, so I have no idea why I'm getting this message.  And does anyone have any suggestions as to how to get all of the iTunes songs to play again?

    Hello Angel82co,
    It sounds like you have some songs in your library that are not playing, and when you try to play them you are being told the computer is not authorized to play them. I would start by verifying that your computer is still authorized, and take note of the Apple ID that you sign in with:
    To authorize a computer, follow these steps:
    Open iTunes.
    Choose Store > Authorize This Computer from the menu bar.
    You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
    Enter your Apple ID and click Authorize.
    If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
    From: iTunes Store: Authorize or deauthorize your Mac or PC
              http://support.apple.com/kb/ht1420
    If the issue persists, next I would use the following article to double check that these songs were purchased under the same Apple ID you used to authorize the computer:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    If it is the same Apple ID then I would next delete the song, and re download it from your purchased history, with this article named:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of the

    I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of these ids are obsolete and I have no access to those accts. The songs all played on my old computer without prompting me for a password.
    Any ideas how I can get around this hassle and get them all to play? We're talking about 800 songs that are being obstinate. The new computer is authorized under my "new" Apple id, which I have used for years.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • Library won't play more than one song at a time

    What gives? My iTunes suddenly won't play a sequence of songs. Not from the library as a whole, not from any playlist. The files are all still there and I can highlight and play any ONE, but iTunes won't then go on to the next. Tried 'select all', that didn't work either. What setting have I accidently changed? Just downloaded the newest iTunes just in case, but that didn't help. Still only 1 song at a time. Makes using iTunes as background pretty useless.

    Are you saying that when you hit PAUSE the song doesn't stop playing?
    If you want to jump to a different song while one is already playing, you don't need to hit pause/stop at all. Simply go to the song you want to here, double click it and the song that was playing will stop and the double clicked song will start. No need to use the Stop/Pause/Play type controls at all.
    Patrick

  • Playlists won't play more than one song at a time

    Hi
    I have setup some play lists, some play all the songs, others will only play one song then stop and I have to manually go to the next song. I don't understand and it's driving me mad! I read through some old posts on this and made sure that the check boxes next to my songs are ticked. I have also made sure that the shuffle & 'play playlist' icons are in blue. Is there anything else I can try? Please, please help!
    Gemma

    Besides the checkboxes next to songs, you might want to check the songs themselves with the Get Info command and make sure the "Skip When Shuffling" option it turned off. If your playlist is set to shuffle and your songs say skip when shuffling, then they won't play.
    Also, are these new playlists? Or are they playlists that were ok before but now (after upgrading to iTunes 7.6?) act differently?
    Patrick

  • Just bought a new album and one of the songs won't play, how do I get it to play?

    Just bought a new album and one of the songs won't play, how do I get it to play?

    What do you mean by "won't play"?
    Try deleting the song and downloading it again from the iTunes Store.

  • I have 2 ipad ist generations.  I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix

    I have 2 ipad ist generations.  I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix.

    I have the iPad2 with IOS5 and Netflix works fine with the Netflix application - I didn't try from Safari. 
    It shouldn't behave differently between iPad1 and iPad2.

  • TS1389 One of my purchased songs won't play. Every time I try to play the song it says to authorize my computer. I have repeatedly tried logging in to authorize this song and it isn't working. The problem is only happening with one song.

    I purchased a bunch of songs last month and one song won't play. Every time I try to play it the window pops up to authorize my computer to play that particular purchase. I tried all of the suggestions that Itunes support send me to. Nothing has worked so far. The song is on my account as a purchased item along with the other items that I purchased the same day. Does anyone have any ideas??

    The very same thing has happened to me today...........?  Could it be a song pending release?  Seems unlikely.  Please post any resolutions.

  • ITunes Error: Cannot play bought iTunes movie from one day to the other "The selected movie won't play on your display."

    Hi,
    just a few weeks ago I watched on my new iMac 5k Retina a long-ago-downloaded movie (iTunes content, HD, Billy Joel. Live at Shea Stadium). I had no issues watching it on the new wonderful display just a few weeks ago!
    Today I wanted to resume the video and got the error "The selected movie won’t play on your display. This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection).".
    Actually the movie plays for a few seconds and then the movie window gets black and the error message appears. Restarting iTunes does not help. Restarting the Mac also not.
    How can this be fixed?
    Additionally I get since I moved from my old iMac to the new one the iTunes error "Do you want the application “iTunes.app” to accept incoming network connections?" every time I start iTunes.
    BR
    Alex
    iMac 5K Retina (ser no DGKP813CFY14)
    AMD Radeon R9 M295X 4096 MB, 4 GHz Intel Core i7,
    OS X 10.10.2 (14C1514)
    I am running FCPX, iTunes, Aperture...

    I found the issue, a new app that I installed the other day...just renamed it and now I can watch the bought content again...
    BR
    a

Maybe you are looking for

  • LMS3.2: is it possible to modify timeout session

    Hi, On windows, is it possible to modify the default timeout session ? What is the default value ? Many thanks for your help, Elisabeth

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

  • Looking for a wireless audio from any source`

    I have an Apple TV, iPhone 6, and Dell PC.  I am shopping for a  self-amplified speaker system which can WIRELESSLY stream audio over my home WIFI network (probably not Bluetooth) for BOTH the following: MUSIC AUDIO, from ITunes, Spotify, apps from i

  • Best quality exporting iMovie to DVD?

    Hallo! I have just finished a movie in iMovie HD 5, and now I am wondering how can I get the best possible quality when converting this project into a movie and then making a DVD? Specific questions: 1. Which way to export the movie? Export it direct

  • Merge Module Problem - I think!!

    I had tried the trail version of Crystal Reports XI and was able to make it work in my applications just fine.  Now that I have purchased the product I have had nothing but trouble.  I can not get it to work even with the previous application that I