Characteristic 0PROFIT_CTR: Time-dependent Master Data Table '/BI0/QPROFIT_

Hello All,
I want to release a infoObject 0PROFIT_CTR to Prod. But after releasing the TR it errors with the following messages:
Characteristic 0PROFIT_CTR: Time-dependent Master Data Table '/BI0/QPROFIT_CTR' not buffered
Characteristic 0PROFIT_CTR: Time-dependent Text Table '/BI0/TPROFIT_CTR' not buffered
I went into these tables and also have set the buffering to ON and made them Fully buffered (Checked).
But even then it gives me same error.
Please help.
Regards,
KP

Hi Harika,
You are right, you will have to use SE14 in production system, just check that whether you have authorization to use it or not. If you don't have authorization then you can check with Basis team.
You can execute SE14, then give table name and in the lower part of the screen Click on the option Save and adjust, and activate the table. Once this step is done you can re-import your request.
Make sure that you do not delete data.
Regards,
Durgesh.

Similar Messages

How to create time dependant master data table in R/3?

Hi gurus,
I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
Manager may change periodically.even i need to maintain all the changes in R/3.
Thanks & Regards,
Bharath

built-in type method means.,
there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected....

Update time dependent master data table

Hi Experts,
Load to ZCUSTOMER is failing bcause time dependent Q table has few customers in modified version. We applied change run process. Job is successfully done, but it is not updating q table.
Please provide us the solution on updation of Q tables.
Thanks...

Hi Viren,
Sorry for late reply.
Your answer is helpful to us.
We got an option for correct errors in q table of zcustomer.
But further steps are performed by our onsite team.
we dont know actual steps they have taken up to solve issue.
But as said by sita, I think we need to access se14, to activate q table incase your answer doesn't work out.
Thanks once again..

Time-dependent master data in the cube and query

Hello,
I have a time-dep. masterdata infoobject with two time-dep attributes (one of them is KF). If i add this infoobject into the cube, what time period SID will be considered during the load? I assume it only matters during load, if i add the KF to the query it gets its value based on the SID in the cube.. right?
Thanks,
vamsi.

If its Time Dependent Master Data object when you run your Master Data if that time any changes to the Master Data that value will be overwrite to the old value you will get the new value. When you run the Query execution the Infocube Master Data infoobject will having the SID that time it will to there it will be displayed at that moved what is the value you have in the Master Data table.
This is what my experience.
Thanks,
Rajendra.A

Modify code to pull the time dependent master data

I fully under stand the suggestion below for the requirement to add the time dependent attribute comp code
thanks fo rthe help but please tell me if there is a way i can modify the abap code and make the user enter the value for the date on which he want to pull th emaster data for company code or keydate to and from and pull the master data, so how will i proceede should i create the variable on 0doc_date and how to modify the code. please help . i have opened another question with same desc as above to assign points
thanks
soniya
The literal within <..> is supposed to be replaced by the actual field name (as I didn't know the fields). In this case, I am changing your code for costcenter/company-code.
data : wa like /bi0/qcostcenter.
select single * from /bi0/qcostcenter into wa
where costcenter = comm_structure-costcenter
and objvers = 'A'
and datefrom le comm_structure-<keydatefield>
and dateto ge comm_structure-<keydatefield>.
if sy-subrc = 0.
result = wa-comp_code.
endif.
abort = 0.
You can use this code for update rule of company_code. You have to replace '<keydatefield>' with a field name that contains the date on which the company is to be derived. If there is a date in your comm_structure (eg aedat) which you can use, you can specify that field in place of this literal (instead of comm_structure-<keydatefld> use comm_structure-aedat). If you have no such field, and you wish to use current date for getting the company code from time-dependent master data, you can use sy-datum (ie replace comm_strucutre-<keydatefld> with sy-datum).
And it should work.
The 'master data attribute' option is one of the options when you create update rule (one of the radio button options).

That the code is doing anyway.
If your txn data in the cube doesn't have a date, how does it know it is Feb data, or, it is March data?
If it has a date or month field, you should modify and use this code to update the company based on that date instead of system date.
Other than that minor variation, it is already doing what you look for.

Time Dependency Master Data Load

Hi:
This is my first time to work on time dependency master data. I need help!
I first deleted master data and cleaned up the PSA for material sales.
Then I have turned on the feature of time dependent on the info object for material sales. Save it and activated the object.
Then i have problems by loading the master sales attribute data in PSA. The error is: on every record of material, it has "invalid 'to' date '00/00/0000'" and "invalid 'from' data '00/00/0000'".
Is every process i did wrong? What is the process to work on time dependent master data? and loading the data?
Thank you!!

Hi,
After turning on the time dependence...you get an extra field in the key of the master data table Q table date to and a new field date from as a new field.
These two fields needs to be mapped to date to and date from R/3 source as well.
If there is no source field for these two then you need to make sure to get the values for these fields.
Just check if you are getting any field like that from R/3...right now i think you have left the mappings for these fields as blank.
Thanks
Ajeet

Reporting Need on Time-Dependent Master Data

Hi Gurus, I have asked this question earlier as well but I did not got satisfactory answer so I thought I should open another thread.
I have this time-dependent Master data infoobject. I see that from the 2 extra fields are added DATETO and DATEFROM. I see in the transfer structure that theyare mapped to ENDDA and BEGDA from an R/3 table.
At the reporting level, the InfoProvider doesn't show these 2 fields. I wanted to see how I can make them show up in the InfoProvider so that I can create report using them. Please help me out on this one. Please let me know if I need to clarify this more.
Thnx.

Hi Bigtoja,
Immediately I can suggest 2 options ...
1. Have these two fields as attributes of the info object ... this will make them appear on the info provider.
2. Have an infoset built on it which will act as an info provider.
Adn as far as your question goes ... What I am trying to figure out is ... does making an info object as an info provider exposes only the P table ... since P table will not have Date To and Date From? I will have to research as well ...
Best regards,
Kazmi

Time dependant master data

Hello,
We have Cost Center as a time-dependant master data attribute of 0Employee and a cube with the day and hours for employees such as below.
Time Cube
Employee#   Work Date          Hours
1             1/5/2008   8
1                 2/8/2008    8
Master Data
Employee#   Begin Date End Date Cost Center
1                 1/5/2008     1/31/2008 1000
1                 2/8/2008     12/31/9999 1200
If we run a query based on the above with a "Key Date" of 2/15/2008 we'll get the below:
Employee#    Work Date         Hours   Cost Center
1                  1/5/2008   8         1200
1                  2/8/2008   8         1200
However what we're really looking for is a design so that when the query is run it will look at the Work Day and join with the master data for that date range and use the cost center for that day, such as below. Is this possible?
Employee#     Work Date         Hours   Cost Center
1                   1/5/2008   8           1000
1                   2/8/2008   8           1200
Thanks,
Ron

One way to do this dynamically with no restrictions is to use virtual characteristic.
There is a BW Expert article on this: u201CVirtual Characteristics and Key Figures Make Queries More Dynamicu201D, here is the [link|http://www.bwexpertonline.com/archive/Volume_02_(2004)/Issue_02_(February)/V2I2A1.cfm?session=].
You need a subscription to red this.
Otherwise here are [links|https://forums.sdn.sap.com/click.jspa?searchID=12889439&messageID=5075982] from SDN.

Delete Time dependent Master Data

Hi Experts,
I have a Time dependent Master Data for 0EMPLOYEE, now I wish to delete only one historical line item from the master data and not the whole data with respect to a Given Employee Number.
Is it possible? Please provide the steps.

Hi,
To make my problem more clear.. please refer to the data below
0employee     Dateto     Date From
ABC     01.01.2010     31.12.2009
ABC     02.10.2009     30.12.2009
ABC     05.05.2009     01.10.2009
now I wish to delete the following record only.
ABC     02.10.2009     30.12.2009
When trying and selecting only the line item it does not allow as ABC is the key and is present in SID table and have transactional data.
Please advice how to proceed with deletion of the incorrect record as this was mistakenly created in master data itself.
Thanks,
Karan

Activate time dependent master data

Hello,
we're experiencing problems in activating time dependent master data.
We're using 0UCINSTALLA infoobject, in the P table all records have objvers = A, but in the Q table there are only a few A records, the most of them have objvers = M and changed = I.
So, how can we activate those records?
Thanks,
Tudor

hi David,
I am having the same problem activating the 0mat_plant...
It is says that the object status is inactive & try to activate it...
The steps I did was....
Hi All,
I am adding a navigational attribute to 0mat_plant...
& after that when I am activating 0mat_plant, it throws an error as follows:
*Diagnosis:*Errors arose when activating InfoObject 0MAT_PLANT. An active version already existed before the activation.
_System Response:_InfoObject 0MAT_PLANT could not be reset to the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
*Procedure:*The old active version of InfoObject 0MAT_PLANT can no longer be used. Remove the cause of the activation error and activate InfoObject 0MAT_PLANT anew.
Pls help me with this issue ASAP...
Thanks

Loading of time dependent master data

Hello Experts,
Please explain how to load the time dependent master data
I have to load 0PERSON now my question is how the mapping of startdate and endate (of R/3 tables) is done which the dateto and datefrom fields of 0PERSON(in BI)
Is it a direct mapping ?

Hi Dinesh
I have used division as an attr of 0PERSON and my current scenario is like
in R/3 i have records like
salesemp -
startdate -
enddate -
division
101----
05.05.2006 -
14.10.2007 -
32
101----
15.10.2007 -
31.12.9999 -
34
But when i loaded the 0PERSON
after the change to division 34
what i cud c in the master data is lik
salesemp -
Valid from -
To----
Division
101--27.06.200818.07.2008--34
101--19.07.200831.12.9999--34
When i loaded the data in infopackage the update tab has the following Time interval start date 19.07.2008 and end date 31.12.9999
Now i really very much confused with this output.
Can nyone explain me where i m wrong?

Reorganization of time dependent master data

I am using reorganization of time dependent master data and it does not merge overlapped period as suggested by SAP. Any suggestions please.
http://help.sap.com/saphelp_nw04s/helpdata/en/c7/b05e3cc3a1a62ce10000000a114084/frameset.htm
Best Regards
Vikash

Hi,
you have used the processvariante "reorganization of time dependent master data" in a process chain and it doesn't work?
I don't think so.
1. it works perfekt. so, you can reduce the data in the master data table.
2. you don't have overlapping periods - you have one-after-another time intervals.
=> Please check the attributs again. I think there is a change in one attribut.
Sven

Data not uploading in Time dependent Master data Infoobject

Hello All,
I have a master data infoobject for HR entity and have to load data from PSA to that info object.
The HR entity infoobject already have sone data like below:
HR Entity
Version
Date from
Date To
x
A
01.07.2013
31.12.9999
x
A
19.04.2013
30.06.2013
x
A
01.09.2012
18.04.2013
x
A
01.01.2012
31.08.2012
x
A
01.01.1000
31.12.2011
Now the data in PSA is as follows:
HR Entity
Start Date
End Date
X
01.01.2012
18.12.2013
Once I loaded this data to the infoobject, i can not see this value which is the latest value of this HR entity.
Can somebody please explain how the data gets loaded in the time dependent master data infoobject and why this entry is not getting loaded in the info object.
Regards
RK

Hi,
did you activate master data after your load?
You can check also version 'M' records and see if your record is there.
The load went green?
The problem is, that your entry overlaps all exisitng time intervals, which can't be deleted or merged as there may be dependent transactional data. You have first to delete the transactional data for this entity.
Then you can delete the time-dependent data and reoload it from your PSA.
BW will build then correct time intervals.
The easiest is to change the time interval in PSA, see example below:
At the moment the time interval is not accepted. But you can add time intervalls before 31.12.2011 and after 01.07.2013, Then system will create remaiing time intervals, e.g. your new record is:
HR Entity
Start Date
End Date
X
01.08.2013
18.12.2013
Result will be:
HR Entity
Version
Date from
Date To
x
A
19.12.2013
31.12.9999
x
A
01.08.2013
18.12.2013
x
A
01.07.2013
31.07.2013
Regards, Jürgen

What is time dependent master data?

Can anybody explain me in detail with an example for time dependent master data?
Thanks in advance.
Sharat.

hi,
the master data value changes with respect to some time characteristics.
say- Salesregion is a char that have sales rep as master data(attribute)
saleregion date from date to              sales rep
sr001        20/10/2007 20/12/2007          Ram
sr002        21/12/2007 12/05/2008          Ram
in the above example Ram is in two sales region in different dates.
these type of attributes were time dependent.
usually time period will be defined in the data range of 01/01/1000 to 31/12/9999.
Ramesh

Reporting on Time Dependent Master Date Info Provider

Dear All.
We have a info object Employee which is time dependent master data containing all the information with time dependency, when i create the query over this info object it give me the option to select the key date and it show the accurate information which is lying according to the key date.
my requirement is to show all the records in the report which are there in master data but i am not able to show more then one record cause of the key date, can you please let me know how can i show all the records for any given employee id in the query.

Hello Zeeshan,
By standard if you create query directly on time dependent info object, it would display the active records as of the report execution (if no key date has been provided). In any case you can only see one record per the info object key, not the history.
In order to fulfill this requirement, you may need to create infoset on this infoobject and select "date from" and "date to" as part of infoset fields.
Then create bex query on the infoset and drag the "date from" and "date to" also into "rows" section of the query (apart from infoobject key, time dependent attributes). This will let you see the history of changes to time-dependent attributes of the infoobject.
Cheers,
Vasu

Characteristic 0PROFIT_CTR: Time-dependent Master Data Table '/BI0/QPROFIT_

Similar Messages

Maybe you are looking for