Characteristic of header for locked the planning

SAP Netweaver 7.0 SEM-BPS 6.0
Hello experts.
I have a layout of planning. This a filter in the level of variable type exit, to several values singles of the characteristic cost center. This characteristic is in header. The variable is mandatory.
the problem is when a user to try to entry to planning  to a value of cost center that other user selected  in the before moment. For example:
USER 1: select value for cost center 10170 in time 1.
USER 1: select value for cost center 20000 in time 2.
USER 2: select value for cost center 10170 in time 2, but this last user can`t planning because  the data is locked for el user 1 selected in time 1 this value.
the locked of user 1 remains although this has select other value.
I believe to remember that the user 2 could planing if in the same time other user isn't planning the same value, but now i have this problem.

Hi,
how does the user 1 select a new costcenter? Is how opening the variable dialog or is he restarting the layout?
If he is restarting the layout the locks should be reset. You can check this in transaction RSPLSE.
Please check this thread Re: Saving one layout in a workbook instead of the entire workbook for the "planning on the fly" concept.
Regards Matthias

Similar Messages

  • When I downloaded IOS 7 today, I accidently set up a passcode for locking the phone.  Can I "undo" that?

    Today I was prompted to upgrade to IOS 7 on my Iphone.  I accidently set up a passcode for locking the phone everytime the screen goes dark.  Can this be "undone"?  Very annoying as I use this phone for personal, nothing important matters & the passcode I set up is rather long?  Any help appreciated. 

    Go to Settings > General > Passcode Lock and undo it there.

  • BI-IP To track the planning changes after Data Locking

    Hi All,
    Need your help to design solution for one critical user requirement in IP.
    We all know that in CC Planning, every month after certain date we lock the planning tool and freeze the data. But on exceptional basis, we might require to unlock planning tool to allow users to do some changes in planning data.
    User wants to track these changes and report it out. Is there any standard functionality that SAP-IP has provided to track these kind of changes? If not what is the best way to achieve this?
    Appreciate any input regarding this ! Thanks a lot!
    Som

    Hi,
    You need to have additional characteristics for User & Date in your RTP to record who changed when and what plan record.
    Then you can create a characteristic relationship of type 'Exit Class' to derive User Id(last changed by) and the date(last modified).
    Itu2019s not necessary to include User-ID and Date in any of the aggregation levels, but the Source Characteristic(Company code may be in your case) based on which the values are derived for User-ID & Date, must be present in each aggregation level.
    Then create a custom class say ZCL_LOC_CR_LINE_ITEM by taking class CL_RSPLS_CR_EXIT_BASE  as super class and then redefine the method DERIVE of interface IF_RSPLS_CR_METHODS in your class.
    You can write following code in your method DERIVE:
    CLEAR e_t_mesg.
    FIELD-SYMBOLS: <l_chavl> TYPE ANY.
    ASSIGN COMPONENT '/BIC/ZUSERID' OF STRUCTURE c_s_chas TO <l_chavl>.
      <l_chavl> = sy-uname.
    ASSIGN COMPONENT '0DATE' OF STRUCTURE c_s_chas TO <l_chavl>.
      <l_chavl> = sy-datlo.
    This will solve your purpose.
    Regards,
    Deepti

  • Lock a Plan cost for a period

    Dear Experts !
    I want to lock Cost Planning for a perticular period ...for this i am doing setting in OKP1 with controlling area wise ...But this is not working ....
    Please Clear me where I am wrong.
    Regards
    SMITH

    hi
    OKP1 locks the plan data for the controlling area, fiscal year, Version and business transaction combinations.
    If you want to lock the planning for the particular WBS, you can do the same in Project Builder under the menu path Edit-> Status-> Lock -> Planning.
    Just see this serves your purpose.
    Regards
    Ramesh

  • What r the neccessary steps should be taken,when the planning book is lock

    What r the neccessary steps should be taken,when the planning book is locked

    Hello,
    If your planning book is locked .. in the lock entries you can see who is locked the planning book.
    It depends on who's (Planners) work is more important and accordingly you should ask the person to come out from the planning book and ask another person to work...
    If you want to know Planning book locking Logics then:
    As of SAP SCM 5.0, the new locking logic liveCache Lock is available in Demand Planning (DP). The system can use this logic to more precisely lock data you are accessing than it can with the aggregated and detailed locks. The liveCache lock takes intervals into account during selection and evaluates for single values the first wildcard character (*) or the first placeholder for each value. You can activate the liveCache lock in planning area maintenance on the Locking Logic tab page. You can activate the liveCache lock together with the key figure-specific lock.

  • How to boldface the header for ONE column

    hi,
    I want to know how to boldface the header for ONE column. The following will boldface the header for all the columns in the table
    table.getTableHeader().setFont(new java.awt.Font("Dialog", 1, 12));
    Thanks.
    Jrabi

    jtable.getColumnModel().getColumn( indexOfBoldColumn ).setHeaderRenderer( TableCellRenderer aRenderer )

  • What is the use for lock object and how to use the lock objects

    Hi Guru's,
    I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque  function modules .

    hi ,
    below are some minfo about lock objects :
      Lock Objects
    These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
    In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
    To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
    Creating Lock Objects
    Lock object is an aggregated dictionary object and can be defined by using the following steps:
    o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
    o Enter short text as usual and the name for primary table.
    -Save
    -Select Tables option
    From this screen you can:
    Select secondary tables, if any, linked by foreign key relationship.
    Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
    1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
    2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
    3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
    Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
    reward if helpful ,
    Regards,
    Ranjita

  • Locks in Planning

    Hi,
    After doing a Manual Planning using Input ready Query,
    Scenario:
    1) On submit of the information from lower level to higher level, a notification would be triggered and a version (Version A) would be generated.
    2) Unless the higher level reviews and sends back the notification for modifications, the lower level shouldn’t be able to edit the generated version (Version A).
    That particular version should be locked for that period of time to the lower level user role.
    Are there any function modules that can lock the plan data for a particular user?
    How to implement the same for a IP planning layout
    Thanks in advance!

    Hi,
    The solution for you seems to be STS (Status and Tracking System). Go through below link:
    http://help.sap.com/saphelp_nw70/helpdata/en/b6/92bc7479fb11d5b3df0050dadfb23f/frameset.htm

  • Unable to see the planning applications

    Hi All,
    I'm using hyperion 11.1.2. I've created a planning application in workspace. Now if i'm using the URL http://localhost:8300/HyperionPlanning, i'm unable to see any planning applications in the drop down ? where as i'm able to access applications in workspace. Do i need to make any settings to see the applications using this URL ? Pls. advice
    Thanks,
    PVR

    As it looks like you only need the default cluster I would start up the configurator, select planning, manage planning clusters.
    Choose "Re-Associate Cluster and Application", select default and choose an application, apply, repeat this for all the planning applications.
    Choose Activate Cluster, select default.
    Then you can delete the cluster that is not needed.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Column header in all the pages

    Hi all,
    I have designed the Account Statement report for banking application. In this report i want to show all the credit and depit history for the particular account. So that i have grouped this report based on account number.
    In this report i am not using report header and column header for showing the report title and coulmn name. Because i want to show the report title and column header for all the selected accounts. So that i have devided the account number group into two part(header a and header b) and in the first part(header a) i am showing the report title(Deposit Account Statement) and in the second part(header b) is showing the column header(such as txn date, txn description, debit amount and etc...).
    In this design i want to show the column header(header b) alone for all the pages.
    Please help me for this issue.

    Hi,
    If u want to display each item of group header on each page,then check the option repeat group header on each page in group expert.
    And if u want display only one part of group header in each page, then u may create a formula in section expert for suppress and write if groupNumber>1.
    I hope this will work.
    Regards,
    Misra P.

  • Wrong period values in Text template for upload of Plan data (KP06/KEPM)

    Hi,
    We are facing an issue in the upload template in text format for Upload of Cost Centre Planning data (Transaction KP06) in ECC 6.0.
    We have some User defined layouts for Excel upload of plan data. If we save the file as a text (tab delimited) file, the Period values above the Column"Period" do not correspond to the correct periods in ECC 6.0. for e.g. the values above Period 1, Period 2, Period 3 are shown as 6, 5, 4 instead of the correct values 1,2,3. These values are considered by the system for uploading the Planning value in the appropriate Periods and hence the values entered in the Column Period 1 in the text file are incorrectly uploaded by the system in Period 6 based on the values generated by the system in the text file.
    However, we do not encounter this issue in the 4.6C system where the values are correctly shown.
    We are facing a similar issue with the text upload template for Sales Planning data in CO-PA (Transaction KEPM), where the values generated by the system do not correspond to the correct period.
    Regards,
    Rajaram

    Hi Christian,
    Thanks for the quick reply, i followed your earlier reply in the below thread and resolved the issue. Thanks.
    How to delete CO plan data
    Hi Ajay,
    Thank you, We are uplaoding through KP06, Menu -->Extras --> Excel Planning --> Upload.
    Regards,
    Raj

  • EXIT/BADI  for enhancing the output of the transaction S_ALR_87013532

    Hi,
      greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
    In  the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
    Can anyone help please?could not find anything worthwhile on SDN. Thnx  a lot !

    Hi,
    Check   these User-Exits..
    Exit name  Short text
    KAHFEX01  Selection data for commercial reporting in PS
    KAP10001  PS: Hierarchy Reports for Projects
    KAP60001  PS: Export Project Key Figures into R/3 EIS
    Also check the BADI
    WBS_USER_FIELDS_F4
    Regards
    Raghu
    Edited by: Raghavendra  Rao G on Sep 2, 2009 12:26 PM

  • Header for alv block list

    Hi experts,
    im trying to build an alv report with block, and after some hours i finally get how it works but the report has 5 blocks .. and 1 header for all the report...and 1 title for each block
    the thing is that for each block theres are their events.. so if i use the TOP OF PAGE that good for each block title, but how can i put a general HEADER for all the report
    its something like this
    Report 0001              DATE
    title 1(top of page)
    alv_list1
    title 2(top of page)
    alv_list2
    title 3(top of page)
    alv_list3
    so... guys im kinda a noobie in alvs so i apreciated any ideas...
    thans in advance

    thx darek,
    but im working with alv LIST blocks .. and each block has top of page and top of list...
    im looking  for a top of list , for say, of all the report, of all the blocks...
    anyone?
    thanks in advance

  • Lock the Tcode through program

    Hi All,
    I has write a program for lock the tcode for that I am using FM:-RSAU_WRITE_SM01_LOG,When I pass Input for  FM like below
    Tcode and lock ,
    It will run correct but the database updation is not takes place..
    Can any one guide to resolve the Issue..
    Please tell me if there is any fm to lock the tcode ..
    Thanks In advance.
    Regards,
    Nagesh

    Hi,
    If your ultimate motive is to update database,then why you are trying to lock a Tcode? You should lock the database table instead,then do your update work and then release the lock. That's it. I think it would be better if you create lock object from SE11 of your particular database table. Call ENQUEUE function module. Update DB table. Then call DEQUEUE function module and you are done.
    Let me know if you face any problems.Hope this would help.
    BR,
    Atanu

  • Start with dates from the past in the planning book

    I want to maintain some figures from the last 14 days in the past.
    And I want the planning book to show these 14 days, when I open the planning book.
    (I do not want to scroll back).
    In my Data view i have to define a Time Bucket profile for the future. (system demand)
    This profile I has defined with one day.
    The Time Bucket profile for the past are 21 days.
    When I start the planning book with the view, I see only one column with todays date.
    I want to see the past 14 days, and therefore I have to scroll back.
    Is it possible to start with the last 14 days?
    - By setting the Period information in the Data view tab?
    - By other settings?
    - By macro?

    Hi Per,
    You need to go for a developing an ABAP report. The development calls for updating the planning start date in the data view design mode.
    You can use function modules /SAPAPO/MSDP_PB_READ_DVIEW and /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB.
    So the logic could be as follows:
    1. First develop a FM which will determine the planning start date as per your requirements. This has to be with respect to the system date. So this Function module should in effect subtract 14 days from system date and store in a date field.
    2. Using the FM  /SAPAPO/MSDP_PB_READ_DVIEW, this date can be updated in the data view / PLanning start date field.
    3. Using FM /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB, you can save and generate the data view.
    After developing the program you need to schedule this in background so that the planning start date is calculated and stored automatically.
    You need to take care of one thing though. In case there are any macros developed in the data view/macro book, the start dates for macro execution will be changed as well. You need to tweak those as per your requirements.
    Hope this helps.
    Regards,
    Ashutosh

Maybe you are looking for