Characteristics and keyfigures not filled in cube

I created the following datamodel (objects with fieldlist):
IOBJ 0REOBJ => DSO T0910020 => CUBE T09C10120
  REOBJ        REOBJ (key)     REOBJ
  Z_DATETO     Z_DATETO (key)  Z_DATETO
  Z_DATEFROM   Z_DATEFROM      Z_DATEFROM
  ...          Z_KF_DATO       Z_KF_DATO
  ...          Z_KF_DAFR       Z_KF_DAFR
0REOBJ is filled by existing dataloads. This works correctly for a number of years already. Dataload works as 3.x.
Dataload from infoobject to DSO works correct. The DSO contains all data as expected. The date-as-keyfigure fields are correctly filled. Dataload works with a DTP process.
The dataload from DSO to CUBE appears to work correctly (green traffic-light) but only REOBJ is filled. All other fields remain empty. Also the dates-as-keyfigures remain empty. I have tried both 3.x updaterule and 7.0 transformation, both with same result.
Any clues about what I am doing wrong?

Did you check if the characteristics of your Keyfigures are filled correctly. I once had the problem that some of my key figures in the transfer rule did not contain all characteristic assigments.
Goto the transfer rule, doubleclick on "Type" of one of those keyfigures which are not filled an check, if on tab characteristics all assignments are the same as in the other key figures.
This may be helpfull ?!
Kind regards,
Jürgen

Similar Messages

  • Live type files look grainy and do not fill the background when used for green screen backgrounds.

    live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

    What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
    The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
    The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
    The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
    Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

  • Custom characteristics and Keyfigures?

    Hi all
    Can any one name possible custom characteristics and keyfigures in SD?
    THNKS
    DURAI

    Hi,
    You can do it in WAD once you upgrade and also in Report Designer.
    check the below link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/dd/cea14119eb9f09e10000000a155106/content.htm
    Reg
    Pra

  • What are the characteristics and keyfigures you had taken in the report?

    what are the characteristics and keyfigures you had taken in the report?

    Hi,
    Different reports are designed for different purpose in B1 system. Regarding the key figures in the report, please check the B1 help file for more detailed information.
    For example: the Inventory audit report is used for audit purpose. We are very concerned with the total inventory value for the items.
    Regards,
    Van Xue
    SAP Business One Forums Team

  • Difference between date info object in characteristics and keyfigure

    What is the difference between "date" data type in characteristic and keyfigure?
    Thanks in advance.
    Raj

    Hi Rajasekhar,
    If date is characteristics,query can be analysed based on date and filters can also be set using this date.
    If it is key figure query cannot be analysed based on date,
    Based on requirements,we have to decide whether it should be chatracteristic or key figure
    Regards
    Prakash

  • LOCPT and LOCSL not filled even though partner function maintained

    Hi,
    In a nomination, I have the problem that the field LOCPT and LOCSL are not filled for one specific plant location even though I have created the in TC O4TQ for the plant and storage location.
    I have checked the specific developments in Z_OIJ_NOM_DEFAULTING (BADI OIJ_NOM_DEFAULTING), but the value is already blank even before the exit is processed, so the problem must be in standard coding.
    Can someone kindly tell me how I can best debug the problem? I would either like to know which standard function module is defaulting the LOCPT and LOCSL or have someone explain me how I can set a watch point to the field oijnomi-LOCPT, so that I can find out what the problem is.
    Thanks for your help in advance
    Petra Just

    Hi
    The problem is resolved for me ,i have checked further and found that in the vendor master the fax number for the vendor was not maintained correctly because of which the output message was not getting determined and invoice was not getting posted.
    i came to know about this error by one tansaction,which i dont remember now..but if you go to SAP and see that the transaction just below MRRL, for automatic invoice posting and try to use that to post the invoice than it will clearly tell you at which stage the message determination is getting failed..there only i came to know that the fax number for vendor was incorrect.

  • How to choose the characteristics and key figures for a cube

    Hi Gurus,
    To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?

    To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?
    Hi,
    For CO-PA since it is a generated DataSource, except for the common characteristics ( E.g. Company Code, Controlling Area ) where you get standard InfoObjects for all other Characteristics and Key Figures you end up creating custom or Z characteristics and key figures. This is unavoidable.
    Assigning points is the only way of saying thanks in SDN
    Thanks,
    Shan.

  • HT5364 My Autofill will not work anymore the popup turns dark grey and will not fill in the blanks, any insight on this?

    Hi, my autofill has stopped working, it pops up and when I click on it, it turns dark grey and locks on the screen. Any ideas?

    https://discussions.apple.com/message/23636688#23636688

  • Data and time characteristics found in character and keyfigures?

    hi all,
    I can find date and time found in both characteristics and keyfigures. Can anyone tell me in which scenario we shall select date and time considered in characteristics and when shall we select date and time for keyfigures.
    can anyone explain me with an scenario.
    regds
    hari

    Hi,
    date and time will be key figures in the case if you want to do some calculation based on them like subtraction or multiplication ( you can do it i also thorugh formula valriables but it has it's limitation)and they are not going to be used as drilldown or for selection variables in the reports.
    If you want only selection and drilldown on then then you should go for char.
    Thanks

  • After my software was updated, all fonts were minimized. Web pages condensed and not filling the entire screen. Can anyone help me?

    After a software update, all fonts were minimized especially on the tool bars. I cannot restore them to original size. Web pages were also minimized and do not fill entire screen. Any suggestions?

    Try resetting your PRAM/NVRAM,

  • Help: Records not showing when cube is placed under the Multiporivider

    Hi Experts,
    I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
    When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
    There are 2 other cubes:
    MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
    DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
    When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
    e.g. in a simple report such as
    Row       :  Plant
    Columns:  Pqty, Sqty, TQty, AQty
    In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
    InfoProvider  InfoObject
    Bcube----
    Plant
    MCube-------Plant
    DCube -
    Plant
    and same for. e.g. 0Calyear
    and same for Key Figures, e.g. I checked all 3 boxes  for PQty which exists in each of the cubes
    1. Why is my data for BCube not showing when reporting against the multiprovider?
    2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
    Thanks

    Hi,
    regarding your questions:
    1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
    2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
    Characteristic Assighment:
    0calyear -- 3 boxes checked for BCube, DCube & MCube
    Plant -- 3 boxes checked for BCube, DCube & MCube
    0Material-- 3 boxes checked for BCube, DCube & MCube
    Key Figure selection
    PQty-- 3 boxes checked for BCube, DCube & MCube
    Sqty --checked for DCube, this key fig is ONLY in DCube
    TQty--checked for DCube, this key fig is ONLY in DCube
    AQty--checked for DCube, this key fig is ONLY in DCube
    I hope this helps you to guide me.
    Or, were you referring to mappings in the transformations?
    Thanks

  • Virtual chars and keyfigures

    HI All,
    I have created a BADI for virtual characteristics and key figures according to a business requirement but the biggest problem is the query performance. Its taking around 15 to 20 minutes to refresh a query. I have used internal tables and field symbols in the BADI but I do not know what is causing this problem.
    Could anybody suggest me? How to improve the query performance? Do I need to do any changes in the code? or anything that can be done in query level? Or taking off virtual characteristics and key figures or do physical design instead of virtual characteristics and key figures? I have done all level of query performance tuning but still same problem.
    have done all kinds of analysis but still I could not find the solution.
    I know this is defiantly something to be done with virtual characteristics and Keyfigures.
    Is there anything new that I can do tuning for code?
    Points will be assigned.
    Thanks,
    Martin.

    dear all,
    I implemented badi for virtual key figures , i am unable to stop at compute method.
    could any one of you suggest me why it is not stoping at compute method while executing quesry even though i kept break points.
    regards,
    Nerusu

  • Comparing characeristics and Keyfigures in SAP R/3 for Gap analysis

    How to compare characteristics and keyfigures with SAP R/3 tables and fields .
    Is there any standard method is there or standard table is there.We are doing Gap Analysis for comparing this one.Please send anyone.
    Sridhar

    check following blogs if they help you:
    /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
    /people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1

  • How to add fields to already loaded cube or dso and how to fill records in

    how to add fields to already loaded cube or dso and how to fill  it.can any one tell me the critical issues in data loading process..?

    This is sensitive task with regards to large volumes of data in infoproviders.
    The issue is to reload of data in case of adjusted structures of infoproviders.
    Indeed there are some tricks. See following:
    http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
    https://service.sap.com/sap/support/notes/1287382

  • Keyfigure is attribute of Master data and need to add at cube level

    Hi,
    We have requirment that need to make report out of Cube and in the report all the fields are comming out of the cube .But one key figure which is not in the cube and need to be there in the report.It is the attribute of sales org.
    Sales org is existing in our cube .
    Please currect me if i am wrong.i am planning to add the new key figure in the cube and will populate the data using upgdate rules.
    Thing is we have upgraded system into Technical BI7.0 from BW 3.x now.If i am going to add the keyfigure in the cube then i have to move the existing data into dummy cube and enhance the existing cube with new keyfigure and write update rules.Do i go for Transformation or Update rules.
    The exsiting cube has Transfer rules and infosource and update rules
    Please some one can advise me in this

    Hi,
    i dont think there is need for including the kf in cube and doing the update rules routine stuff.
    you can directly use the KF from the attribute of the master data in the query.
    PLease go thru the following link. This is applicable with 7.0 also
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc
    Regds,
    Shashank

Maybe you are looking for