Charging my Treo 650 in Europe

Next month I will be in Europe (Moscow and Paris) on business. Although the Treo 650 will be a CDMA model for the Sprint network -- and thus I know it will not operate as a phone while I'm over there -- I still would like to use it as a Palm device. With my old Kyocera 7135, all I needed to do was use a plug adapter: no transformer or converter was necessary. As for the new Treo, I just don't know.
And by the way, the power requirements of Paris is 230 volts/50 Hz and in Moscow is 220 volts/50 Hz.
So the basic question is, what will I need to charge the battery of my Treo 650 while I am in Paris and Moscow?
Post relates to: Treo 650 (Sprint)

ive never been to russia but did you see this, does it have the voltages you eneed:
http://web.palmone.com/products/Product.jhtml?id=80023&cat=20018
Travel Charger Kit for Treo 650
Get the charger kit for the jet set crowd. Includes an ultra-slim international travel charger for 110-240 voltages and a handy six-foot cord. Plus, you get automatic voltage and frequency adjustment and plug adapters for the U.K., Europe, Australia, and the U.S. so you can charge just as easily from home or abroad.
Compatible: Advanced switching type power supply is compatible with most international voltages and frequencies (110-240 volts, 50-60 Hz, 1A DC output) -- includes plug adapters for the common electrical sockets found around the world (U.S.A., U.K., Europe, Australia)
Standard: Uses new Multi Connector by palmOne
Convenient: Six foot cord reaches around or under desks, etc.
Lightweight: 5.6 oz, 159g

Similar Messages

My treo 650 wont charge the charger is always shaky i just got a new one and it's giving the same problem

Post relates to: Treo 650 (Cingular)

I have had an issue that I have been dealing with for about a year that sounds just like this. I found they were due to poor electrical connections. Check and clean all the electrical connection contacts for the battery to the phone, and the phone to the cord. Because I had plugged and unplugged the phone so much, the hole for the power cord was very dirty and had become quite worn and was bigger than it should have been. I first did like you and got a new cord, this helped but I still had issues. So because I was cheap and did not want to send the phone out for repair to replace the worn parts, or get a new phone, I spent some time and rigged it up nicely. After cleaning the contacts on the phone, I started working on the cord to tighten it up. So with the charger unplugged from the wall and the phone, I very carefully pried up on the contacts that plug into the phone so they would stick out a little more. This helped, but not good enough. I then tried to tighten up the worn hole. At first, I used a small piece of trimmed electric tape that made the plug thicker, this worked, but the tape kept coming off. When I finely got tired of that, I cleaned the tape off of it and started building up several thin layers of superglue making sure not to get it on the contacts. After I was sure the glue was fully dry! I plugged the cord in the worn out hole and it fit, and worked like new. That was almost a year ago. I have had to re-apply glue once after it had wore down some. I also found that a desk charger where the phone stands up works pretty good. It still has and issue from time to time. I just have to wiggle it a bit and I can get it to work.
Best of luck with your issue.

Retrieving data from a dead Treo 650

Hi! I'm REALLY hoping someone can help.
I bought a new phone last week (not a palm, after a serious amount of agonizing...I've been with palm since the palm III). I'd had my 650 for four years, and it had served me well.
Not two days after I bought the new phone, the 650 simply stopped working. Nothing would convince it to turn on. I've tried:
1. Pushing any and all button combinations
2. Soft resets, both plugged into the wall and on its own
3. Charging it overnight from the wall
4. Charging it overnight from my computer
5. Put my wife's 650's battery (her 650 still works) into my phone. (her phone also works with my battery, so i'm pretty sure it's not a battery issue)
I haven't tried any hard-reset sorts of combinations (obviously).
Nothing brings this poor device to life. The problem is, my ENTIRE life is on that phone, and, being the forward-thinking man that I am, I hadn't hot-synced the device to my computer since I got a new computer (please, no chastising...I know it was stupid). This means, the data on the device ONLY exists on the device.
I've read through these forums...there haven't been too many people with this issue, but the answers they've been given have been uniformly depressing. Does anyone know of a trick to retrieving the data (even if it involves paying someone else to do it)? At this point, I don't care about the phone...it's my contacts and my memos that I want back.
Fingers crossed.
Post relates to: Treo 650 (Verizon)

I think your 650 is just scorned because you replaced it ! My 680 did the same thing last year and I was without a phone for 2 days. I just plugged it in and left it there and a couple of days later it turned on by itself. I later realized it was a bad battery. I know you've tried other batteries, I'm just telling you what mine did. Oh and it did it with the wall charger, the car charger never woke it up during my 10 hour drive to my country home.

Treo 650- Can't get service after trip to Thailand & use of different SIM card - AT&T says it is a hardware problem

I have used my Treo 650 for years in the US. I've also taken it to other countries (Africa, Europe) and used SIMS purchased there for service while in those locations. Upon returning to the US after each trip, I've always been able to use my US SIM to get my US service back.
However, I went to Thailand in November and used a SMILE SIM and another Thailand SIM, both of which worked in Thailand. Unfortunately, upon returning to the US, my US SIM won't work for getting service any more. (I am using my US SIM in a Nokia phone in the meantime, and it is working. When I put the SIM into my Treo, it will transfer the text messges, but will not connect to my service provider, AT&T.)
I called AT&T and they said it was a hardware problem. I suspect it might be a "lock" problem with one of the Thailand companies. Is it possible that the Thai company locked my cell phone?
So my question is, how can I fix this? Whatever the problem is, I'd sure like my service back! Please help!!
Post relates to: Treo 650 (Unlocked GSM)

I don't think a SIM card can lock your phone. Did you let them do anything with the keyboard?
Can you try with a friend's AT&T or T-Mobile SIM card and see whether either will work?
Edit: You can ask about Thai mobile phone company issues on this board: Internet & Technology @ Paknam Web Thailand Forums
Message Edited by Jeffro on 02-26-2009 12:07 AM

Getting contacts from Dead Treo 650

My wife drowned her Treo 650 and it's permanently dead. ATT no longer partners with Palm so we got another phone. Is there any way to get the contact data from the SIMM card in the dead Treo into the new phone?
Thanks,
Post relates to: Treo 650 (Cingular)

I think your 650 is just scorned because you replaced it ! My 680 did the same thing last year and I was without a phone for 2 days. I just plugged it in and left it there and a couple of days later it turned on by itself. I later realized it was a bad battery. I know you've tried other batteries, I'm just telling you what mine did. Oh and it did it with the wall charger, the car charger never woke it up during my 10 hour drive to my country home.

Cracked Treo 650 screen that I need to sync with my laptop

I have a Treo 650 with a cracked screen. I can turn it on and it lights up, but I can not read it. It has information on it that I need to store. I had my phone in my back pack, had to place the back pack on the ground. Someone came along and placed their heavy bag on top of my and cracked my screen. This has be over a year ago. Are there any smart teckies out there who can help me. PS. I never got to sync my phone because I got it sent to me while in Iraq. The phone is charged. I need help ASAP, please!
Post relates to: Treo 650 (Cingular)

Are you still in Iraq?
Have you tried using a HotSync cable with a button built into it? I'd try doing a HotSync with one of these - just press the button and hopefully it will HotSync to a compatible computer with Palm Desktop installed.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

Can anyone help me get a HotSync between a Treo 650 (Verizon) and a PC running Windows Vistra to exchange Calendar/Date Book data?

For whatever it is worth, I've had no Hotsync problems with the Address Book, To Do List, or Memo Pad Apps. I upgraded from the Beta version of Palm Desktop for Windows Vista to Palm Desktop by Access, Version 6.2.2 late last summer. HotSyncing worked fine for all Apps for a few days, but Date Book Syncs have failed since 09/16/08, as shown in the abbreviated log shown below:
HotSync session completed with errors on 10/18/08 16:59:44
HotSync session started on 10/18/08 16:59:30, and completed in 14.0 seconds
Date Book synchronization aborted
Duration: 0.2 seconds
Some PC records were not copied to the handheld. Your handheld may be full. To correct this situation, delete some records and perform a HotSync operation again.
Desktop = 261, Handheld = 0
Address Book synchronized successfullyDuration: 11.1 seconds
HotSync session completed with errors on 10/18/08 16:46:38
HotSync session started on 10/18/08 16:46:18, and completed in 20.0 seconds
Date Book synchronization aborted
Duration: 0.1 seconds
Some PC records were not copied to the handheld. Your handheld may be full. To correct this situation, delete some records and perform a HotSync operation again.
Desktop = 261, Handheld = 0
Address Book synchronized successfullyDuration: 16.7 seconds
HotSync session completed with errors on 09/16/08 09:48:53
HotSync session started on 09/16/08 09:48:51, and completed in 2.0 seconds
Date Book synchronization aborted
Duration: 0.1 seconds
Some PC records were not copied to the handheld. Your handheld may be full. To correct this situation, delete some records and perform a HotSync operation again.
Desktop = 241, Handheld = 0
HotSync session completed with errors on 09/16/08 09:43:18
HotSync session started on 09/16/08 09:42:40, and completed in 38.0 seconds
Date Book synchronization aborted
Duration: 0.1 seconds
Some PC records were not copied to the handheld. Your handheld may be full. To correct this situation, delete some records and perform a HotSync operation again.
Desktop = 241, Handheld = 0
Address Book synchronization completed with messages
Duration: 16.6 seconds
Desktop category 'Nags Head' has been deleted.
To Do List synchronized successfullyDuration: 0.7 seconds
Backed up all files successfully to jfzaehringer's Backup folder
Duration: 17.5 seconds
Backed up 7 file(s) successfully
locLCusLocationDB
PhoneCallDB
CalendarLocationsDB-PDat
psysLaunchDB
Graffiti ShortCuts
Saved Preferences
FrameworkDB
HotSync session completed successfully on 09/02/08 20:22:23
HotSync session started on 09/02/08 20:21:46, and completed in 37.0 seconds
Date Book synchronized successfullyDuration: 2.2 seconds
Address Book synchronized successfullyDuration: 11.7 seconds
Backed up all files successfully to jfzaehringer's Backup folder
Duration: 15.8 seconds
Backed up 5 file(s) successfully
PhoneCallDB
psysLaunchDB
Graffiti ShortCuts
Saved Preferences
FrameworkDB
HotSync session completed successfully on 08/28/08 11:36:58
HotSync session started on 08/28/08 11:36:36, and completed in 22.0 seconds
Date Book synchronized successfullyDuration: 2.9 seconds
Address Book synchronized successfullyDuration: 11.4 seconds
Backed up all files successfully to jfzaehringer's Backup folder
Duration: 6.6 seconds
Backed up 5 file(s) successfully
Blazer Cookies
psysLaunchDB
Graffiti ShortCuts
Saved Preferences
FrameworkDB
To the best of my recollection, the 9/16/08 Date Book HotSync failure shown above roughly coincided with the onset of similar failures when I have attempted to HotSync the same Treo with the Windows XP Pro box I use at work. I don't know whether the HotSync failure on the Windows Vista Box I have at home preceded the failure on the XP box I use at work or vice versa, but I have to wonder if a HotSync failure for an App on one box can trigger similar failures for the same App when one attempts to HotSync it on other boxes. I've trolled this help forum and haven't found any leads. I really need to get my calendars at work and home back on the same page, so I would greatly appreciate suggestions. jfzaehringer
Post relates to: Treo 650 (Verizon)
Post relates to: Treo 650 (Verizon)

There may be database corruption causing the issue. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will scan for database corruption and then report the corruption. You can then find the records causing the problem and fix them yourself or you can purchase the program and have it automatically fix the records.
http://www.pimlicosoftware.com/dbfixit.htm
Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo650verizon/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Setup problem: Can't setup Treo 650 (Cingular) with iSync on Macbook

Hi,
Trying to use my Treo 650 with iSync on my MacBook. It worked fine with an iMac G5 running OS X 10.4.8.
I paired my Treo with the MacBook. That seemed to go OK, but the Bluetooth Setup Assistant showed a message saying "There were no supported services found on your device" at the end of the pairing process.
When I launched iSync, I went to Devices --> Enable Palm OS Syncing and let the conflicting Palm conduits disabled. No problem there.
But when I then choose Devices --> Add Device, a window appears as the MacBook searches and finds my phone. It then displays the message "1 device found", with the name of my device next to a phone icon. Beneath that, another message says "iSync cannot connect to this device".
Does anybody know what I'm doing wrong? My Treo is set to discoverable. I can't figure it out.
Thanks in advance!

The Add Device… response is normal. You cannot add a Palm device using that menu option - it is added as a consequence of selecting the Enable Palm OS Syncing… option beneath it in the list.
If you have successfully paired your Treo using Bluetooth and triggered the installation and configuration of it after selecting the Enable Palm OS Syncing… option and it still does not appear as a device in the main window of iSync, you should launch the HotSync Manager to insure that the iSync Palm Conduit appears—it's listed as the iSync Conduit—and that it has been activated: the checkbox in the conduit configuration panel should be checked.
This may also be a basic Bluetooth issue, as the your Treo contains several supported Bluetooth profiles, and is a supported device. You might want to break the link, and pair it once again, initiating that action from your smartphone and confirming it from your MacBook.

Palm Desktop seems to back up only select data from Treo 650

I recently transferred my Palm Desktop program and backup files from my old XP PC to my new PC running Windows 7 (64bit). Aside from the frustrations of being unable to HotSync using USB, I was more concerned that that address & calendar files in my user folder were nearly empty.   My calendar contained 14 random events from within the last month and the address book contained three contacts (my Treo contains hundreds). Each folder should have contained considerably more data. I went back to the original user folder on my old PC and the saved data was no different. Although hundreds of events & contacts appear on my Treo and in the Palm Desktop, my user file has less than 1MB of data in those respective folders.
Can I conclude that my monthly HotSyncs have been faulty all of this time? Or am I looking in the wrong place for my complete data. Until I find a workaround the Windows 7 problem, I want to make sure all my data is at least present on the hard-drive (even though I can't HotSync).
FYI, this is where I found my skimpy data:   C:/Palm OS Desktop/(username)/address   and   C:/Palm OS Desktop/(username)/datebook     .   The Palm Desktop is Version 6.2.2
Thank you!
Post relates to: Treo 650 (Sprint)

An update to the above issue:   All of the datebook & address data IS present within the *.aba files within my user folder when opened via Microsoft Access. However, when I import those files into Palm Desktop, only a small handful of events (28 out 5000+) and addresses (3 out 1000+) appear.

Need to upgrade from my Treo 650

I have a Treo 650 that is getting old, but I love it. I use it to manage my entire life! Should I replace it with another Treo 650? Or is there another Palm product that I can upgrade to that I can transfer all my data to? I use my Treo 650 (Verizon) as a phone and PDA to store memos, tasks, contacts, calendar, etc. I noticed that Verizon will soon be carrying palm Pixi Plus and palm Pre plus but I don;t know if they are a good solution for me. I am not technologically savvy. Please help. Thanks!
Post relates to: Treo 650 (Verizon)

Hi, and welcome to the Palm Support Community.
If you were to get another Treo 650 to replace your current one, you would basically be replacing an old, used device with...another old, used device.
The easiest "upgrade" path would be to go with a new model of Palm OS phone that works on your carrier. Problem is, Palm doesn't make 'em any more. It's all webOS...Pre and Pixi will both be coming to Verizon as you already know.
The upgrade path from Palm OS to webOS depends a little bit on whether you sync your data with Palm Desktop or Microsoft Outlook. There are several ways to do it...exporting data from your current desktop repository and importing it into a Google account; using the the Data Transfer Assistant which you'll have access to if you get a webOS device; or using a third-party desktop sync application such as Chapura Echo (Palm Desktop) or Pocket Mirror (Outlook).
Personally (since you asked for opinions), I would visit your Verizon store when the Pre Plus and Pixi Plus are available; see how you like the hardware, and give it a test run. Assuming they will give you a 30-day trial period like AT&T and Sprint do, you can return it if the migration turns into more of a hassle than you'd like to deal with, at which point you can always look for a newer Palm OS phone in the used market such as eBay.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Problems syncing with iCal and Treo 650

I use iSync for syncing my iBook G4, .Mac, iPod Photo and Treo 650. It has worked fine until a month ago. The iSync conduit somehow works OK with the Contacts/Address Book, but doesn't for the Tasks and Calendar (iCal). It is a real pain the to write everything manually on the Treo and the iBook separately. Can anyone help me with this? I really don't want to replace (reset) all the info on my Treo; this will cause me to re-categorize everything in the Treo, for iSync doesn't take care of it as far as I know. Thanks, ~L
iBook G4 Mac OS X (10.4.7)

Welcome to Apple Discussions.
What does your HotSync log say about these unsuccessful attempts to synchronize your Treo 650?
While it is important to correct this problem, if you want support for categories, calendar colors, contact photographs or icons, extended electronic mail addresses, URL and birthday data, you should ditch iSync in favor of the Missing Sync for Palm OS, a much more powerful and reliable program:
http://www.markspace.com/missingsync_palmos.php
On advanced Palm organizers and smartphones like your Treo 650, extended support is available as outlined in this document, for contacts…
http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2560
…and this document, for events and tasks:
http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2563
In addition, it supports internet sharing, Finder mounting and file transfer with SD cards, conduit profiles, iPhoto and iTunes media file synchronization, the synchronization of AvantGo content, and network synchronization of supported devices.

How do i restore synching between Treo 650 and iCal & Address Book

prior to installing 10.4.7, i was able to sync my treo 650 with iCal and Address Book; iCal and Address Book syncs with .Mac and Entourage; Entourage syncs with Outlook on my office pc; and Outlook syncs with my Blackberry 8700. therefore, all i needed to do was enter an appointment or a contact in one device, and all the three other devices would be in sync.
i recently upgraded to 10.4.7 and now, i have problems synching: (1) iCal and Address Book can no longer sync with my treo 650, and (2) iCal and Address Book can't sync with Entourage either.
after installing 10.4.7, i noticed that my treo 650 cant sync with iCal and Address Book. i always get the error "isync conduit synchronization failed. ( the first time it happened, i checked isync, and i noticed that "enable palm os synching" was unchecked, so i enabled palm os synching. after that, i was able to sync my palm, but for one time only. after that, i couldnt sync anymore.)
at the same time, i noticed that iCal and Address Book wouldnt sync with Entourage anymore.
i also noticed that iCal starts-up even if i dont activate it. when iCal starts-up, the beach ball spins for around two minutes before it responds; if i click an entry to edit it, the beach ball would likewise spin for a minute or two before i can edit it. i went through all the entries and noticed that some have multiple alarm entries: i deleted these and iCal no longer slows down.
however, whenever i launch Entourage or iSync, iCal also launches. unfortunately, no synchronization takes place.
can somebody help? how do i restore synching between my treo 650 and iCal & Address Book? how do i restore synching with Entourage? thanks.

Bon asis,
I have the exact same situation. Sorry this doesn't help, but wanted you to know that someone else is in the same exact boat.
Jim

Can I Recover Overwritten Data from Treo 650?

I synced my TREO 650 to my Macbook. It seems like the macbook overwrote all of the Contacts and Calendar entries on my Treo. In other words, it synced the mac to my treo, instead of the other way around, which is what I need.
Is there anyway to recover the lost data on my Treo?
Thanks

Accidentally deleted data from XD card, don't panic. I suggest an advance and professional XD card recovery software, you can use third-party software Kernel for Digital Media Recovery Tool. It can quickly restore all lost data from XD card. This software
also supports all kinds of multimedia files such as SD Card (Secure Digital), Multi Media Card (MMC), Compact Flash (CF), XD Card, Micro SD card, , Memory Stick. To more details kindly read this post : http://digitalmediarecovery.blogspot.com/2013/12/retrieve-lost-data-from-memory-card.html

Syncing iCal and Address Book w/ my Treo 650 (Who overwrites who?)

I am able to sync both address book and ical with my treo 650.
My question is:
1. When I change a date or contact's info on my treo why does it not change that entry on my Mac? It adds a different one.
2. Each time I sync I get the message for both Address book and iCal that entries will be deleted or modified on my computer. The numbers are not consistent each time I sync. I usually have to cancel the sync because many entries (I'm not sure which ones) will be deleted. How do I tell iSync or Hotsync Manager that my Computer gets priority?
Sometimes I get the conflict window that asks which entries (iCal or Treo) should be kept.
Any ideas?
MacBook Intel Core 2 Dou - Black - 1 GB RAM Mac OS X (10.4.9) G4 - 733 MHz (Quicksilver) - 768 MB RAM

Welcome to Apple Discussions.
The synchronization framework should not behave as you describe. It appears that your truth database has become irreversibly corrupted, a condition which is easily corrected. Repeated cancellation of synchronization events likely has contributed to or amplified the underlying data corruption issue.
A couple of basics: all participants in this process, generally referred to as synchronization clients, are peers. They do not interact directly with each other, but rather through a process of pushing changes to and pulling changes from the truth database. You cannot set one to 'override' another, though you can reset both history [which empties the truth database, leaves your clients registered and your data intact, and results in a slow, initial synchronization during the next triggered event] and data—if using .Mac Sync—[which allows you to replace all contact, event and task records stored on your computer with those stored on the .Mac servers, or visa versa.]
The Conflict Manager is only invoked when iSync sees records with differences it cannot resolve at the field, rather than record, level. In such cases, it asks you to choose one record which most accurately represents the collection of data you want to keep for that contact, event or task.
To reset your synchronization history and prompt a complete restoration of your truth database, do this:
• launch iSync
• open the Preferences… dialog
• press the Reset Sync History… button
This Apple developer document explains how these process work, and may clarify some of these issues for you.

Charging my Treo 650 in Europe

Similar Messages

Maybe you are looking for