CHaRM Issue "Logon to System"

Dear Solman experts,
I have an issue in CHaRM. When I try to logon the development system through the CRM_UI, i get the message System &1 don't exist, But when i go to the maintenance cycle in the SAP GUI, an perform the action Logon to system it works. In the Tx SMSY if i check my logical component the system displays the errors "System &1 Removed". I find this very strange because i can logon to the development system through the SAP GUI, maintenance cycle, but not the CRM_UI.
Hope some of you have encounter this problem before and would like to help me.
I'm running on Solution Manager 7.1 SP4.
Thanks in Advance.
Regards,
Ricky

Hi Ricky,
Added the server address in the local intranet in iexplore, then logon action worked fine!
Step :
Iexplore -> Intenet option -> Security ->local intranet -> add the host address
Rg,
Karthik

Similar Messages

  • Logon to system is not working in ChaRM solman 7.1sp2

    Hello,
    I have configured Urgent change in solman 7.1sp2 version.
    Logon to system is not working in Landscape bar.
    Please help on this.
    Regards,
    Karthik

    No authorization issue. Using the RFC's i am able to logon to satellite system.
    In Solman 7.1 ChaRM , Creation of Request for Change(Rfc) in CRM Web Client UI Interface.
    So they removed Logon action in SMHF, added in Landscape Block in portal page.
    Both Logon to system(Landscape Block) and Maintenance cycle (Related Transcation block) not able to open.
    It doesn't show any error in trace.
    I have created the SAP ticket for the same.
    Rg,
    Karthik

  • ChARM Issue

    Dear Team,
    We are facing a common issue in solution manager while configuring CHARM. We have reached the u201Cin developmentu201D phase after that the Logon to system should come, but it is not listing in the task list. We gone through sppfcadm T-Code there the u201Cexecutable in the dialog box u201Coption is checked, but still Logon to system option is unavailable.
    Please response at earliest

    Hi,
    Check out the following:
    SPPFCADM -> CRM_ORDER -> Condition Configuration  -> Action Profile: UC -> Logon to System
    The aforementioned action definition should be defined either twice, each for In Development and To be tested, or can be defined once.
    For twice, check schedule condition, which should be CRM Service Process.User Status for E0002 and E0004, for DEV and QAS accordingly
    If it is defined once, the above logic would be mentioned with OR logical condition.

  • Does anybody use ChaRM with their BW system?

    We are looking to implement Charm for our BW system and I am looking for somebody that has experience with this. For example if you extract a new field from your ECC system and transport it via Charm, does the system recognize that this transport needs to finish generating the data in BW before it moves the next transport in line? Or do you have to manually import these transports into BW?

    Horst,
    We already have Charm for ECC, CRM, SCM, Portal and the setup is not really a problem. The issue I have around BW is really a different one. Today, without Charm, we have the issue that the transports are not going in in the sequence that they are released (the BW manager gives us the sequence he wants them to be moved) and that in between transports we have to wait until the generation of data in BW is done, before the next transport can move. This takes a lot of time and as this needs to be done in off hours it keeps a person busy on the weekend, which ideally I want to avoid going forward as we are not staffed for that.
    So my question is if we are doing something wrong in general around the transports we do for BW (so that we have to wait and change transport sequences and do stuff manually) and if Charm is only going to make it worse....
    Looking for tips and tricks on how we can get this to go automated... . How can we get this to improve?
    Can you give me a few details on how your transports are going through for BW and if you encounter any of the above problems or how you might have resolved them?
    Thanks for your reply and thoughts on this
    Martina

  • Performance Issue for BI system

    Hello,
    We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
    There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
    The Main problem is while running a report or creating a query is taking way too long time.
    Kindly help me.

    Hello SIva,
    Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
    we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
    No one is using the system currently but in ST02 i can see the swaps are in red.
    Buffer                 HitRatio   % Alloc. KB  Freesp. KB   % Free Sp.   Dir. Size  FreeDirEnt   % Free Dir    Swaps    DB Accs
    Nametab (NTAB)                                                                                0
       Table definition     99,60     6.798                                                   20.000                                            29.532    153.221
       Field definition     99,82      31.562        784                 2,61           20.000      6.222          31,11          17.246     41.248
       Short NTAB           99,94     3.625      2.446                81,53          5.000        2.801          56,02             0            2.254
       Initial records      73,95        6.625        998                 16,63          5.000        690             13,80             40.069     49.528
                                                                                    0
    boldprogram                97,66     300.000     1.074                 0,38           75.000     67.177        89,57           219.665    725.703bold
    CUA                    99,75         3.000        875                   36,29          1.500      1.401          93,40            55.277      2.497
    Screen                 99,80         4.297      1.365                 33,35          2.000      1.811          90,55              119         3.214
    Calendar              100,00       488            361                  75,52            200         42              21,00               0            158
    OTR                   100,00         4.096      3.313                  100,00        2.000      2.000          100,00              0
                                                                                    0
    Tables                                                                                0
       Generic Key          99,17    29.297      1.450                  5,23           5.000        350             7,00             2.219      3.085.633
       Single record        99,43    10.000      1.907                  19,41           500         344            68,80              39          467.978
                                                                                    0
    Export/import          82,75     4.096         43                      1,30            2.000        662          33,10            137.208
    Exp./ Imp. SHM         89,83     4.096        438                    13,22         2.000      1.482          74,10               0    
    SAP Memory      Curr.Use %    CurUse[KB]    MaxUse[KB]    In Mem[KB]    OnDisk[KB]    SAPCurCach      HitRatio %
    Roll area               2,22                5.832               22.856             131.072     131.072                   IDs           96,61
    Page area              1,08              2.832                24.144               65.536    196.608              Statement     79,00
    Extended memory     22,90       958.464           1.929.216          4.186.112          0                                         0,00
    Heap memory                                    0                  0                    1.473.767          0                                         0,00
    Call Stati             HitRatio %     ABAP/4 Req      ABAP Fails     DBTotCalls         AvTime[ms]      DBRowsAff.
      Select single     88,59               63.073.369        5.817.659      4.322.263             0                         57.255.710
      Select               72,68               284.080.387          0               13.718.442             0                        32.199.124
      Insert                 0,00                  151.955             5.458             166.159               0                           323.725
      Update               0,00                    378.161           97.884           395.814               0                            486.880
      Delete                 0,00                    389.398          332.619          415.562              0                             244.495
    Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM

  • Authorization issue in BI system.

    Hi,
    Having a authorization issue in BI system.
    user trying to run a query in and attempt to drill down by customer, he gets customer details but some of the customers are missing...
    Does the authorization granted in BI system based on customers? Is it a security issue?
    pls help...
    Thanks...

    Hi,
    Please execute the query with your id(developer id who will be having access to all data) first. Check if you are able to see all the customer data. If you are able to see all the data then the user is restricted with some authorizations. ( usually the authorizations are done on sales organization, company codes, plant..etc.. please check how it is in your project...)
    If you are not able to see all the customer data, then check in the infoprovider on which the query is built and do your analysis.
    Check in the roles assigned to the user.
    Hope it helps.
    Edited by: Maddy on Apr 21, 2011 6:42 AM

  • How to find the user who never logon R3 system since system golive.

    Hi everyone,
    Our R3 system golive on 2005.Due to some reasons,we need to find out the users who never logon R3 system since system go live and want to delete it.Those large numbers of unvalued users has been created because of imprecise estimation before golive.So for now,we willing to remove those users by using some kind of method.and you know,the number of unvalued user are immense,so it's impossible to identify this kind of user by using T-code su01 one by one.
    Thanks in advance.

    Hi rong,
    Run report RSUSR006. One of the criterias is "Users with Initial Password"
    That should answer your question.
    Regards
    Juan

  • ChaRM for SAP BI systems?

    Hi!
    We would like to implement ChaRM functionality for our SAP system landscape.
    Among others we have 3 SAP BI systems.
    Does some one experience with set up of ChaRM for SAP BI systems?
    Do we have here a different approach as for other systems (e.g. SAP ERP 2005)?
    Thank you very much!
    regards
    Thom

    Hi Thom,
    we are using a ECC landscape, a BI landscape, a Solution Manager landscape, and a CRM landscape within CHaRM. All landscapes are separate transport landscapes, and there is a transport domain link from SolMan Production system (as this is the transport domain controller).
    To answer your question: The approach is all the same for any landscape (as long as they are just ABAP systems). The approach is different for Dual-Stack of Java systems, you would need CTS+.
    Best Regards,
    Holger

  • Third party Logon ticket system - Info Required

    Hello
         We have to integrate existing Broadvision portal to Enterprise portals. We are in the mood of moving to third party logon ticket system. Can anyone suggest which is the best one?.  The user has to login to Broadvision portal first and then by using sigle sign-on to EP next. Can anyone suggest what are the possibilities are there to implement SSO amoung the above hetrogenous portal?

    For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
    It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
    These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
    I hope this answer will help.

  • You cannot logon (CUA system assignment missing)

    I request the access to HU2,... systems, but when I tried to logon via GUI, got the error message - You Cannot logon (CUA system assignment missing).
    I tried Web GUI, it tells me that user name and password not valid,...
    Any clue?
    Thanks,
    Andrew

    Dear Andrew!
    Sorry for delay reply, I hope your problem has been solved till now. Anyhow my reply may help to other guys.
    Sometime this error will appear after System copy/migration or technical upgrade.
    Suppose that xyz user face an error "You cannot logon (CUA system assignment missing)" during login attempt after system copy/migration or system upgrade.
    Solution:
    Login as sap* user and reset xyz user password in su01. New password length of xyz should be at least 14 to 15 characters. If you are unable to login as sap* then reset sap* user with database utility in usr02 table and remove parameter u201Clogin/no_automatic_user_sapstaru201D from profile if active. Login as xyz user and insert new password with any length at new password windows.
    After successful login of xyz user, do the same practice for all users who are facing the same problem.
    Regards.
    Yasir.
    Edited by: Muhammad Yasir Shafiq on Mar 29, 2011 10:07 AM

  • Im getting a pop up to fix all issues affecting your system status by activating MacKeeper. should i update?

    Im getting a pop up to fix all issues affecting your system status by activating MacKeeper. should i activate?

    No, no, no.  MacKeeper is legit virus protection software BUT it's very poorly written.  I had it on my Mac and, on occasion, it would take three or four minutes to do something as simple as opening a folder.  I did some investigation and found that MacKeeper was consuming 200% or my processor when the virus protection kicked in.  Don't ask.  I can't explain a figure greated than 100%.  In any event, I deleted MacKeeper and the problem was instantly solved.
    For the record, virus protection is really unnecessary with a properly maintained Mac.  I bought MacKeeper for the purpose of retrieving a trashed file from a jump drive.  It couldn't do that, either!
    Finally, MacKeeper is only for the Mac - you couldn't install it on an iPad even if you wanted to.

  • I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    Apple wanted to charge me 50 bucks jsut to talk to someone! 
    I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
    Can you get to an AppleStore Genius Bar?
    They may be able to fix this for you. No charge.
    I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
    However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes.

  • Middleware issues due to System copy on ERP

    Hi Middlewware Gurus,
    We are currently on CRM 5.2 and the backend ERP system is 4.6C. In our project we are currently exchanging only BP data but going forward we will exchanging Sales Quotation and Materials. Currently the CRM system is not live but the ERP system is live and the client has a process for overlaying their ERP QAS with the Production system every month. We recently have installed the CRM QAS system and connected it with the ERP QAS system. But before downloading any data into CRM, client has done a system copy of ERP Prod to ERP QAS. Due to this the logical system names got changed and outbound queues in ERP were failing with an error. Based on our experiences in earlier projects, we ran BDLS in the ERP QAS and our problem got solved.
    Because of the huge data in the ERP system, the BDLS Tx. ran for almost 6 hrs for which client is against doing so. We would be facing this issue with Logical System everytime there is a system copy of ERP Prod onto ERPQAS. Is there a way to identify the tables that for relevant for CRM Middleware and update the Logical system directly in those tables using a custom progrm. With this approach, we will be eliminating the long runtimes for executing BDLS. With BDLS, you have to again bring the system down and lock out the users. One table which I could identify is CRMPRLS. If anyone has a list of those tables or know a way to identify these tables, please let me know.
    Thanks for the help.
    Regards,
    Karthik
    Edited by: Krishna Karthik Puttagunta on Mar 21, 2008 11:36 AM

    Hi Martin,
    You can follow SAPINST to export your source database and import the same into target database as you have performed in your ABAP+JAVA system.
    In case you want to go with option of attaching/detaching database, you should refer the following SAP notes.
    Note 151603 - Copying an SQL Server database
    Above note has steps to perform the database copy using attach/detach method.
    Note 767691 - Migration of SAP Systems to/from MS SQL Server
    Regards,
    Deepak Kori

  • CHARM: Double logon popup in transport to test system

    Hi Colleagues,
    In Charm, when transporting OTs to test system, we have two  logon popup screens where we have to insert our user and password. Why do we have to repeat logon? Is there possible to register user and password only once?
    Best regards,
    Sandra Gaete

    Hello,
    You may want to review this document as a start.
    [This FAQ was deleted: visit SAP Single Sign-On for help]
    Regards,
    Paul

  • Solution Manager ChaRM Issues when Upgrading Satellite System

    When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
    Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
    1. Normal Correction (In Development)     Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
    2. Landscape is changed to                    Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
    3. Normal Correction moved to To Be Tested -> Consolidated -> Production
    Will the Normal Correction be in error because the landscape changed for the iBASE?
    Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
    Thank You,
    Carlen
    Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
    Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

    Thanks Subhashini!
    We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
    Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
    Thanks again!
    Carlen

Maybe you are looking for