ChaRM - transport with error keep repeating for every transport job

Dear experts,
We are using ChaRM for our transport. There are always transport will returned with error. And I believe this is a feature provided by ChaRM, that all these transport with error will be retransport again during next run. Is there anyway to stop this? Some is in the list of "Correct Import (Repair Flag)" in task list, but some is not.

Hello FlyingFox,
I assume that we consider a urgent correction with different transport requests:
tr #1 :       retrun code 0
tr #2 :       retrun code 8
tr #3 :       return code 0      (but tr #3 didn't resolve the problem of tr #2)
Starting the import again, transport requests #2 and #3 have to be imported.
Sequence errors will be possible, if only tr #2 is imported again.
Therefore:
mark those transport requests, which shouldn't be imported again via task list ('correct transport requests manually' as you described - in our little example: mark tr #2).
Afterwards only new tranport requests will be included (e.g. tr #4).
Best regards
Horst
Edited by: Horst Förster on Oct 25, 2011 11:37 AM

Similar Messages

Page headers repeat for every record on *.CSV export in Crystal 8.5

I am a MAS 90 reseller. I have encountered this issue:
When I try to export a report to a *.csv format in Crystal Reports version 8.5 page headers repeat for every record in the export file. The Sage MAS 90 database provides this solution:
This is a known Crystal Reports issue. Download U2FSEPV.DLL, version 8.6.2.475, dated 11/28/2003 from the Business Objects Web site. For more information and a download link, see knowledgebase article c2014451 at support.businessobjects.com
Note: Be sure to select the download link for Crystal Reports 8.x.
I cannot locate this download anywhere in the new SAP site. Can anyone direct me to this download?
TIA for your help!

I was finally able to get the uploaded file by right clicking on the file and selecting Save As. However, when I replace all instances of this dll file with the new one (renamed as directed) I continue to get headers in the CSV file.
This does not resolve the issue of getting headers only in the output. Is this the correct dll file or is there another issue causing this output error?

Text/Label issue - being repeated for every record inside repeating frame.

Hi
I have a small issue:
In the repeating frame, the label (text) for the column is being repeated for every record. How may I have the text (label) appear just once and not for every record?
Thx!

Move headings outside of the repeating frame.

Notes in Mail: Every time I type a new note it is emailed to my Mail along with a new note for every change I make to it

Notes in Mail: Every time I type a new note it is emailed to my Mail along with a new note for every change I make to it.
I don't mind the Note being updated in my mail but I don't need a new copy every time I edit/add to the note.
It's driving me mad!
Thanks.

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My thunderbolt keeps repeating music every few seconds

My new Thunderbolt monitor keeps repeating music every few seconds. When I play anything else, the music continues. How can I stop it?

I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
I've solved it in the following manner(s):
1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
3) Perform any software updates
I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
Enjoy.

E mail with attachments keeps repeating

Sorry this may be a bit long, but what is wrong with BT / Yahoo when delivering mail to a pop 3 client lately?
Here’s the problem, if anyone else has it, I’d be interested to swap notes.
I have used it with a Btinternet address for a couple of years without a hitch, but in the past few weeks, with any alterations or warnings, it has decided to repeat sending mail with largeish (typically about 2 mb) attachments, though small files attached ( a couple of tens of kb) get through with any hold ups.
Normal mail gets through, but the Yahoo server will keep sending mail with the larger attachment, time after time.... ad infinitum.
Any subsequent mails are held up until I go into Yahoo’s page and delete the offending file. This releases all the other mail and it works fine until I get the next large attachment when it goes through it all again.
I’m using a combination of Thunderbird 3 on one computer and Outlook on a second; both are affected. Both are up to date with Kaspersky and no changes have been made to the firewall settings.
How do I know it’s Yahoo?
A Gmail account, using the same Thunderbird 3 client works without any problems and all the large files all get through.
I’ve waded through most of the tecno-giberish on line and much of it is contradictory, so I’m open to any ideas about the problem and most importantly, the fix.

quarter-saw wrote:
Sorry this may be a bit long, but what is wrong with BT / Yahoo when delivering mail to a pop 3 client lately?
Here’s the problem, if anyone else has it, I’d be interested to swap notes.
I have used it with a Btinternet address for a couple of years without a hitch, but in the past few weeks, with any alterations or warnings, it has decided to repeat sending mail with largeish (typically about 2 mb) attachments, though small files attached ( a couple of tens of kb) get through with any hold ups.
Normal mail gets through, but the Yahoo server will keep sending mail with the larger attachment, time after time.... ad infinitum.
Any subsequent mails are held up until I go into Yahoo’s page and delete the offending file. This releases all the other mail and it works fine until I get the next large attachment when it goes through it all again.
I’m using a combination of Thunderbird 3 on one computer and Outlook on a second; both are affected. Both are up to date with Kaspersky and no changes have been made to the firewall settings.
How do I know it’s Yahoo?
A Gmail account, using the same Thunderbird 3 client works without any problems and all the large files all get through.
I’ve waded through most of the tecno-giberish on line and much of it is contradictory, so I’m open to any ideas about the problem and most importantly, the fix.
This is a common problem with largish emails and having a slowish connection. Have a look at
http://community.bt.com/t5/Other-BB-Queries/Duplicated-emails-in-outlook/td-p/477877
There are several other threads with similar problems all relating to Yahoo Mail servers.

Why does this error keep coming back every time I wish to download a rented movie? Err = -50.

I keep getting an error after renting a movie. It's usually Err = -50. I tried deleting my downloads folder (as instructed) which has only worked a few times now. The error keeps coming back. Also, I have a movie stuck in my downloads. It won't go away.

Hi there
This often occurs if your computer does not meet the minimum system requirements for viewing HD content in iTunes. You can find more information, including system requirements, in the article below.
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
-Griff W.

Genrating unique tagIds with in a repeater for acessing from javascript

Hello BEA experts,
I am trying to generate unique tagids for elements with in a repeater so as to be able to access them using javascript to do some validations , I tried using scriptlets like <%=i%> and also tried using the {container.index} property by appending it to the tagId ,but they are not being generated uniquely ..
Can anyone point me out in the right direction has anyone done this before..Any hints?
Thanks in advance
-Bob

Hi Bob
Here is a sample to generate unique id's and access them in java script.
I basically had the tagid generated using expressions to be unique like below
<netui:checkBox tagId="<%=checkBox+(j++)%>"
dataSource="{container.item.chkBox}" />
Thanks
Vimala
Here is the full jsp source:
<netui:html>
<head>
<title>
Web Application Page
</title>
<script language="JavaScript" type="text/JavaScript">
function printValues()
for (i=0;i<3;i++) {
alert (document[getNetuiTagName("myform")][getNetuiTagName("String"+i)].value)
alert (document[getNetuiTagName("myform")][getNetuiTagName("Check"+i)].checked)
alert (document[getNetuiTagName("myform")][getNetuiTagName("Radio"+i)].checked)
</script>
</head>
<body>
<netui:form tagId="myform" action="displayChoice">
<%!int i=0; String str="String"; String checkBox="Check";int j=0; String radio="Radio";int k=0;String textBox="Text";int l=0;%>
<netui-data:repeater dataSource="{actionForm.formList}">
<netui-data:repeaterHeader>
<table class="tablebody" border="1">
<tr class="tablehead" valign="top">
<th>ChkBox</th>
<th>Str</th>
</tr>
</netui-data:repeaterHeader>
<netui-data:repeaterItem>
<tr valign="top">
<td> <netui:hidden tagId="<%=str+(i++)%>" dataSource="{container.item.str}" /> </td>
<td> <netui:checkBox tagId="<%=checkBox+(j++)%>" dataSource="{container.item.chkBox}" /> </td>
<td> <netui:radioButtonGroup dataSource="{actionForm.radioStr}">
<netui:radioButtonOption value="Good{container.index}">Â </netui:radioButtonOption>
</netui:radioButtonGroup>
</td>
<td> <netui:select defaultValue="{pageFlow.defaultValues}" dataSource="{container.item.selectStr}" size="5"> </netui:select></td>
<td> <netui:textBox dataSource="{container.item.strText}" /> </td>
</tr>
</netui-data:repeaterItem>
<netui-data:repeaterFooter></table></netui-data:repeaterFooter>
</netui-data:repeater>
<netui:button value="displayChoice" type="submit" onClick=""/>
</netui:form>
<table>
</body>
</netui:html>

I purchased songs thru itunes and used a file sharing system to get other songs. when i went to sync it came up with error -69. just for the stuff i purchased yesterday and the free doownloads. whats the issue?

purchased songs thru itunes yesterday and also thru a free file sharing place. i added the songs to itunes yesterday & today i went to sync up and all the songs from yesterday have a error -69. what is the deal?

Usually a 69 indicates damage to a file ... but it's a bit suspicious that everything acquired in a short time frame is showing a -69. That has me wondering about disk damage.
Perhaps try running a disk check (chkdsk) over your C drive (or whichever drive you've got the 69-throwing content on).
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup (especially if it's running on the C:\ drive). The scan should take quite a while (especially on the C:\ drive) ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, do the items still give you a -69 when syncing?

How to deal with error ORA-06531 for collection

All,
Can anybody see anything wrong with my code below. As far as I can see everything is in order but I am getting the ORA-06531 error.
Thanks in advance
CREATE OR REPLACE
Type T_PREO_PRIV is Object
PRIVILEGE_ID NUMBER(10),
PRIVILEGE_NAME VARCHAR2(20),
PRIVILEGE_TYPE CHAR(1))
CREATE OR REPLACE
TYPE T_PRIVInfo IS TABLE OF PREORDER.
T_PREO_PRIV
SQL> CREATE OR REPLACE Procedure PREORDER.P_GetUserPrivlegetest(Userid in number, UserPriv out T_PRI
VInfo, status out number)
2 as
3 V_UserPriv T_PRIVInfo;
4 begin
5 select T_PREO_PRIV(preo_priv.privilege_id, PRIVILEGE_NAME, PRIVILEGE_TYPE)
6 BULK COLLECT INTO V_UserPriv
7 from preo_user_role, preo_role_priv, preo_priv
8 where preo_user_role.role_id = preo_role_priv.role_id
9 and preo_role_priv.privilege_id = preo_priv.privilege_id
10 and user_id = Userid;
11
12 V_UserPriv := UserPriv;
13
14 status := 0;
15
16 EXCEPTION
17 WHEN OTHERS THEN
18
19 Status := -1;
20 end;
21 /
Procedure created.
SQL>
SQL> DECLARE
2 profile_info T_PRIVInfo;
3 Status smallint;
4 BEGIN
5
6 --preo_security.P_GetUserPrivlege(42, profile_info, status);
7 P_GetUserPrivlegeTest(42, profile_info, status);
8 dbms_output.put_line('P_GetUserPrivlege '||Status);
9 For i in profile_info.FIRST..profile_info.LAST loop
10
11 dbms_output.put_line('******************************* ');
12 -- dbms_output.put_line('privilege_id '||UserPriv(i).privilege_id);
13 -- dbms_output.put_line('privilege_name '||UserPriv(i).privilege_name);
14 -- dbms_output.put_line('privilege_type '||UserPriv(i).privilege_type);
15 end loop;
16
17 END;
18 /
P_GetUserPrivlege -1
DECLARE
ERROR at line 1:
ORA-06531: Reference to uninitialized collection
ORA-06512: at line 9

As in your other post, you have these reversed. The line that says
V_UserPriv := UserPriv;
should be
UserPriv := V_UserPriv;
There may also be other errors; I didn't check.

Having trouble with error message in itunes every since I had a new hard drive installed. Write access are not enough or permissions aren't allowed. I have changed all of these in the corresponding folders, restarted and nothing works. I need help bad??

Got a new hard drive installed and since then, I cannot get purchased song into my itunes. It is telling me that my write access or permission are wrong. I have changed all and nothing works. HELP!!!!!!

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Display Siebel Pop up box with Service Request count for every 1 hr

Hi
For our client business, we need to achieve the below functionality. Please suggest me the best method to implement.
1. When the user logged into the application, it should pop up a box by displaying the No# of SR in "New" Status that are assigned to the user who logged in.
2. The pop up box should update it self every 1hr from the time of login and should not require seperate query or refresh.
I have done some initial analysis by using browser script and some recursive functions like(setTimeout).
Thanks,
Sridhar

Issue has been resolved. There was no interesting work-a-round or fix involved.

Installation Error: Keeps asking for rebo

"You have previously installed drivers without rebooting.
Please reboot and try again."
Oh, I have, and I'm losing patience. I've removed every Creative product from the add/remove program list, deleted the leftover directory in program files, scrubbed the registry using ccleaner, and rebooted about a thousand times. Why can't I install these drivers? Please help!
Audigy 2
Win XP Pro SP2
Intel D945 mobo

Are you sure you have completely uninstalled any previous Creative software? Better follow this procedure, just to be safe.
To cleansweep Sound Blaster audio cards under Windows XP
Go to Control Panel, Add Remove Programs and uninstall all listings related to your audio card. Do not restart your computer when prompted so.
Go to Control Panel, and switch o Classic View. Click System, Hardware tab, Device Manager button and delete all Creative Labs and Sound Blaster sound card entries in Sound, Video and Game Controllers as well as any previous sound card entries from the Device Manager.
Reboot the computer and cancel out of any driver installation if you are prompted.
Insert the Creative Sound Blaster installation CD into your CD-ROM dri've. Exit from the installation wizard if it autoruns.
Click Start, Run and then Browse. Browse to Z:\Audio\Drivers\CTZAPXX.EXE, where Z represents the CD Rom Dri've.
Select Driver Uninstallation for WDM drivers and click OK.
When prompted to restart, say No.
Click Start, Run, type MSCONFIG and press Enter.
Check the box next to Selecti've Startup and deselect <B>Load Startup Items.</B>
Select the SERVICES tab and select Hide All Microsoft Services.
Uncheck all results and click OK.
Browse to the C:\Temp folder and C:\Windows\TEMP (if it exists) - all files and folders in the temp folder need to be either deleted or moved to a new folder.
Browse to Program Files, Creative and then to a Sound Blaster folder (depending on your particular card), and delete the Sound Blaster Folder - if you get a file that won't delete, right click on the file, click Properties and clear all the attributes. The file should then be able to be deleted.
Empty the Recycle Bin
Restart the computer, and reinstall the Sound Blaster drivers and applications if desired.
Click Start, Run, type MSCONFIG and press Enter.
Insert a check to the left of Selecti've Startup and select <B>Load Startup Items.</B>
Select the SERVICES tab, and check back in the items that were unchecked previously in step 0.</LI>

When online via WiFi, Firefox repetedly attempts to connect via dialup, with error dialog box returning every 15 sec. or so.

At home, I use dial-up. When I'm visiting, or at certain stores, I use a Wi-Fi connection. When I'm on Wi-Fi, Firefox does not fully recognise it. It will, eventually, use the Wi-Fi connection, load pages, etc. But it keeps trying to dial in, even while connected via Wi-Fi! Closing the dialog boxes only works for a few seconds, then it tries again, and again, and again, and again... Arrgh!
N.B. Could this be Weatherfox connecting to update weather info using its own connection, rather than piggybacking on whatever Firefox is doing?

You can try to swap the order of the connections and place the Wi-Fi connection at the top to see how that works.
*Network Connections > Advanced > Advanced Settings > Adapters and Bindings

Console error keeps repeating

I have a steady stream of the following error flooding my Console log. Anyone know what it means?
10/29/08 6:56:00 PM com.apple.launchd[1] (0x10d9c0.cron[4233]) Could not setup Mach task special port 9: (os/kern) no access
Thanks
Message was edited by: Nestor Holynskyj

how often do these run? it indicates that cron is running something. have you set up any cron tasks? if not it actually could be something malicious
run the following commands in terminal and post back the results (please copy and paste, do not retype)
crontab -l
sudo crontab -u root -l
after the second command you'll have to enter your admin password (which you won't see). that's normal.
Message was edited by: V.K.

ChaRM - transport with error keep repeating for every transport job

Similar Messages

Maybe you are looking for