Chart does not update after table changes

Simple X-Y chart using a data series from a table. The chart will not update after changing the table, for example after applying a filter. The chart will update if you close and reopen the file or go to Select Data on the chart. I use named ranges
because you can't use table nomenclature directly in the chart series definition.

Seems to update for me OK. You need to apply the entire unfiltered range to the chart before filtering. Did you do this or filter first and only apply the visible range?
If not the answer to you query then maybe I am not understanding the problem correctly so can you upload an example workbook?
Guidelines to post a workbook on OneDrive
Zip your workbooks. I prefer that you do not just save to OneDrive. (To Zip a file, in Windows Explorer Right click on the selected file and select Send to -> Compressed (zipped) folder.)
Go to this link. https://onedrive.live.com
Use the same login Id and Password that you use for this forum.
Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded and select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
Right click the file on OneDrive and select Share.
Do NOT fill in the form; "Select Get a Link" on the left side.
Click the button "Create a Link"
Click in the box where the link is created and it will highlight.
Copy the link and paste into your reply on this forum.
Regards, OssieMac

Similar Messages

Management Studio 2008 does not refresh after table create / alter

hello
Management Studio 2008 does not refresh after table create / alter, why?
f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
regards, jan

Hi jm,
I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Streaming foto Apple TV not update after password change

Hi
After changing password idapple, my Apple TV has asked to reset the password of iTunes. iTunes Store is ok...but streaming photo does not update the password. The only way is to "tap" on exit and set to start streaming photos.
But this loses all photos before the month. Happens to you? Is this normal? suggestions?

I initially started the update process and the saw the TV screen graphic which seemed to direct me to plug my apple tv into my PC.
Well... after scratching my head and getting a few ideas from discussions I realized there problem probably began due to some loss of transmission between my PC, Apple TV, and my Router.
Some information I found online suggested that one possible solution was to reset/configure the internet firewall.
in my case I found the fact that somehow my primary internet browser, chrome, was corrupt and could no longer get to the internet. This originally happenned a week ago and I though nothinig of it to use my safari browser instead. Then is clicked. Itunes was probably trying to use chrome to get to the internet as well.
Solution: I removed Chrome from my PC and then was able to connect to ITUNES. Then I plugged the brick... lol AppleTV into my PC and restored it. The restore process did the update first and then reset everything to factory settings.
Everything works fine and it's all so much better. I'm getting better performance overall and I do see a difference. Before the update youtube videos would stall several times during playback and now.. it's streaming nice and smoothly! Purchases on Itunes radio work great as well. Perhaps AppleTV links direct to the router now rather than performing checks in the transmission via the PC - so it acts now as a truly standalone device?
I initially started the update process and the saw the TV screen graphic which seemed to direct me to plug my apple tv into my PC.

Firefox 15 UI does not update after wake from sleep

On my Netbook running Windows XP 32-bit, if I leave Firefox open when I put the computer to sleep (by closing its lid), then when I wake it up from sleep, the user interface elements (like the tab bar) won't respond to mouse clicks. This does not happen 100% of the time; in particular it won't happen for a freshly restarted Firefox that is put to sleep, making the problem rather annoying to reproduce. As far as I can tell, I might have to visit some set of websites with Javascript or Flash or something.
Here are some more details about the user interface, because it is not as simple as non-responsiveness. When I wake it up, when I click on a tab to switch to it, the Windows title bar actually changes to display that tab's page title, but nothing else in the UI updates including the URL bar and the actual page displayed. Similarly for closing a tab; the tab remains, but the title bar shows the title of the tab that would receive focus next. After I "pseudo" close a tab and then restart Firefox, it does not remember that I closed the tab (I save sessions) and restarts with the same set of tabs before I tried to close one.
I get the problem even after disabling all extensions and resetting all toolbars to defaults. I have not tried to create a new profile because I have a lot invested in my current profile.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

I am working on a large mailbox migration from one AD site to another.
Exchange version at both sites:Exchange 2010 SP2
Two Mailbox Servers: MBX01 in site A / MBX02 in site B
(There is a DAG but keeping this simple)
Two CAS Arrays: CASA.domain.com / CASB.domain.com
The RPCClientAccessServer property is set accordingly. Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
Clients:Outlook 2010 SP1
Scenario: I successfully move a mailbox from Site A to Site B. The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
I have seen a few articles regarding this pointing to workarounds such as:
- repairing the outlook profile on the client
- delete the existing outlook profile
- run a script to update the prf file (re-cache's email at the client)
I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
I would also like to know if you have seen this affect ActiveSync devices. I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
Thanks.
Mike

Hi,
Seems you got several replies in the thread below that you posted in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
Please come back to the thread above and check if the replies are helpful.
Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
Best Regards,
Steve Fan
TechNet Community Support

Release strategy does not reset after PO change - tried changeability 4 & 6

Hi,
After my PO is released, I change the item quantity/price such that the net PO value (increased) is changed MORE than the tolerance % set in the changeability. I expect that the PO release should be reset but it does not.
However if my PO value is changed (increase) such that my PO value is now in a different "release bracket/range" -- as it falls into a different release strategy, then the release is reset.
Could anyone advise me what is wrong? I tried everything - i tried changeability = 4 and 6. i deleted the whole release class, release strategies and recreated -- nothing.
According to OSS note 493900 below, it should reset when the tolerance % is breached.
I'm on SAP 4.7.
Anyone could advise?
thanks!
     3. Question :
     Why is the release strategy not reset ?
     Answer :
     A reset of the release strategy only takes place if
            - the changeability of the release indicator is set to '4' in
               case of a purchase requisition and '4' or '6' in case of
               another purchasing document (purchase order, request for
               quotation, contract, scheduling agreement),
            - the document is still subject to the previous release
               strategy,
            - the new TOTAL NET ORDER VALUE is higher than the old one.
     The total net order value is linked to CEKKO-GNETW for a purchase order,
     CEBAN-GSWRT for a purchase requisition item-wise release and CEBAN-GFWRT
     for a purchase requisition overall release.
     If you have maintained a Tolerance for value changes during release
     (V_161S-TLFAE), the release strategy is reset when the value of the
     document is higher than the percentage you have specified and if the
     document is still subject to the previous release strategy.

Hi,
Thanks.
The release strategies are able to be determined correctly when the PO is created so I guess that means its all setup correctly?
The issue is only with PO change - how to cause the reset when the PO value increases by more than the tolerance %.
cheers.

JTable does not update after fireTableDataChaged

Hi everybody,
I have a strange problem here and I don't know how to solve it. In my applet I use a JTable which displays data from a database and uses a customized table model. The JTable has 2 columns and is NOT editable, i.e. you should not be able to change the values directly in the table itself. Instead, a JDialog is opening when somebody makes a doubleclick on a row of the JTable. In this JDialog one can change the data of the selected row and afterwards the JTable and the database should be updated. The database gets updated but not the JTable, although I called myTableModel.fireTableDataChanged()
When I close (dispose) the screen which contains the JTable and then recreate the screen with the JTable (using new MyScreen(....)), then the changes are displayed in JTable (because the table model requeries the database). But when I update the database AND the table model of JTable (via setValueAt) then the changed row is displayed 3 times instead of just 1 time!
Do I have to update both, the database and the table model or is it enough to update the database and call myTableModel.fireTableDataChanged() ?
But as said in the first case the changed row is displayed 3 times and in the second case the changes are displayed not at all. Do you know a solution?
I attach some code snippets.
Your help is appreciated very much!
//should update the table model of JTable
public void setValueAt(Object aValue, int rowIndex, int columnIndex)
row = (Vector) data.elementAt(rowIndex);
row.add(columnIndex, aValue);
data.add(rowIndex,row);
//should update the JTable and the database
if((oldRecipeName.equals(recipeName)) && (oldDesigner.equals(designer)))
//no data-saving necessary
currentDialog.dispose();
else
//save and close
tableModel.setValueAt(recipeName,selectedRow,0);
tableModel.setValueAt(designer,selectedRow,1);
updateRecipe(); //this is a method which updates the database
tableModel.fireTableDataChanged();
currentDialog.dispose();

dear, dear, dear !
in the setValueAt() method, u r adding a new line everytime to the vector. u should not add the data, u should replace the data. change the setValueAt() method to
public void setValueAt(Object aValue, int rowIndex, int columnIndex)
row = (Vector) data.elementAt(rowIndex);
row.setElementAt(columnIndex, aValue);
//data.add(rowIndex,row); don't need to call this. Changes would be reflected in data also.
ta,

Conditional formatting in the chart does not work after 10g to 11g upgrade

W e have upgraded from 10g to 11.1.1.6.8 recently. For all the reports conditional formatting for charts is not working for us which used to work in 10g.
While researching , i have found that advanced xml needs to be modified. So i changed xml where there is 'untypedLiteral' to 'decimal' and saved the report. Inspite of saving , xml wouldnt change . It still shows as untypedLiteral.
I also tried to delete the conditional format and recreate again. But still it wouldn't work.
Please advise.

W e have upgraded from 10g to 11.1.1.6.8 recently. For all the reports conditional formatting for charts is not working for us which used to work in 10g.
While researching , i have found that advanced xml needs to be modified. So i changed xml where there is 'untypedLiteral' to 'decimal' and saved the report. Inspite of saving , xml wouldnt change . It still shows as untypedLiteral.
I also tried to delete the conditional format and recreate again. But still it wouldn't work.
Please advise.

Hi I have subvi in subpanel does not update after opening

Hi I have a problem with subvi updating inside the subpanel, after opening.
I need your advice, I am using LabView 7.1.
I am asking for your opinion before I can post my code because it is very large and made of many files outside the folder.
Here's the description of my problem.
- In the main vi, it has an event structure to open 3 references of the files, based on the ring control, Not only that, it also has events for many controls.
- In each subvi, it also has an event structure ofr it's own controls to work inside
- After opening the subvi in the subpanel, the controls like strings, are not updated, till the main vi is minimised and maximised again. Then the controls are updated. Weird... But then other controls are unresponsive and in the end I aborted it.
Funny thing is that, when I stripped most of the parts, leaving the essential ones I wanted to focus and debug.
It seems working and no problem.
How am I going to troubleshoot? I don't have any faintest idea as to how to find the cause of trouble?
Clement

astroboy wrote:
Funny thing is that, when I stripped most of the parts, leaving the essential ones I wanted to focus and debug.
It seems working and no problem.
The only think i can think of, strip the parts one by one ... when it works, probably you will have find the prolem (the last stripped).

Lighthouse password does not update on password change

The Lighthouse password is not updating when a password is changed in AD by ctrl-alt-del and received by the JMS Listener adapter. All of the user's assigned resource passwords change, except Lighthouse. When the user has a capability, the Lighthouse password updates consistently.
Using IDM 7.1.1.
How can we get the Lighthouse password to update without a capability assigned to the user?
Thanks,
Richard

WalterLaan wrote:
I believe the GTK L&F feel ignores the background of components. ..I just checked on an Ubuntu Linux box (using the system PLAF) and confirmed your belief. I could set the FG to any color I wanted, but the BG stayed white.
Edit 1:
And I'd have done that when I first saw the post, if the OP had posted an SSCCE. ;-)
Edited by: AndrewThompson64 on Nov 24, 2009 10:22 PM

Windows XP SP3 cached domain user credentials are not updating after password change over VPN

We have a bunch of sales people who stay on the road indefinitely, using Windows XP SP3 domain joined laptops.
When they change their domain user password, while connected through the VPN, the cached credentials are not updating locally on their laptops. This causes issues at their next Windows login, where they have to use their prior password to gain access
to the OS. Then when they connect through the VPN client, they have to use their new password. We have already tried Microsoft KB 829652 (which was rolled up with SP3 anyways).
I have found several work arounds, but I would like to attack the root cause.

You have to recache the credentials if you change the password. You may have to get the user to log in locally. Then connect to VPN. Once connected to vpn, have them do a run as on any program...I usually use notepad or internet explorer (this will
cache their credentials with the updated password.).

Firefox does not update after downloading updates on restart. How to fix?

For quite some time now I receive the auto-notification that an update is ready to download. I proceed with the download and restart Firefox, yet the browser never updates. How do I fix this short of doing manual downloads every time?
MacBook Pro Mac OS 10.6 FF v 10.0

Thanks for your reply, Matt. I already read the knowledge base article, and it doesn't specifically address my issue. The update IS being downloaded, yet it is not updating the FF app - even on restart. As I indicated in my initial question, I've been experiencing this for the last year. To finally upgrade to v.10.0 I had to download a fresh copy of FF. Now, again, for the last two updates that I've been notified on - 10.1 and 10.2 I've followed the same procedure - allowed the downloads, did the restart and NO UPDATE to the app.

Commitment item does not update during PO change

hello All,
when we change PO " GL account " the old commitment item remains without changes.
your help is appreciated,
I.Gad

Hi,
Please, consult note 658163 - Acct assignmnt change: Determinatn of new FM acct assignmnt
Regards,
Eli

Treetable does not update when plsql changes db

Hi,
I have a database table based VO. From this VO I create a treetable.
Now I use a pl sql procedure that I invoke from my UI that rollsup data that is shown in the treetable.
My problem is that a simple addPartialTarget statement on the treetable is not refreshing the data that is shown in the tree table after the rollup finishes and the results are written to the DB.
I also tried the sequence of these methods that I found somewhere.
vo.clearCache();
vo.refreshCollection(null,true,true);
vo.executeDetailQuery(masterRows);
This also did not work. On inspection of the code in these methods I saw that they operate on the default iterator (the later 2 calls). Hence my problem since treetable is supposed to have some internal iterators.
My question is how do I force the treetable to refresh itself in my scenario or more preceisely the VO to update the values in its cache and than the treetable partial target should be able to pick up these changes ?
Regards.

So here is the soln for all interested
After reading the documentation on refresh properties I saw the tip that the only way to refresh the iterators was to call execute on the given iterator.
This can be done as below :
// Tell the iterator to re-execute the query to get the new data
ControlBinding ctr = (ControlBinding) getBindingContainer().getControlBinding("YourTreeBindingNameHere");
CollectionModel model = (CollectionModel)this.yourTreeTable.getValue();
JUCtrlHierBinding hierBinding = (JUCtrlHierBinding)model.getWrappedData();
hierBinding.executeQuery();
// refresh UI to show the new data in the iterator above.
AdfFacesContext.getCurrentInstance().addPartialTarget(yourTreeTable);
Setting the refresh to any amount of properties would not have helped and indeed did not help as I tried it all out.
Sorry can't find the document page again for this post but you will find this tip where all the property values for Refresh attribute on the iterator are defined i.e. ifNeeded, prepareModel etc.

Windows disc does not update after resizing boot camp partition

When I bought my iMac, it came with a 500 GB HDD. I used bootcamp to make a 200GB windows partition and a 300GB Mac partition. The other day I bought a 250GB SSD, and moved everything from my 300GB Mac partition onto the SSD.
My plan was to use the whole 500GB HDD for windows. So, I deleted the 300GB Mac partition and made it free space on the drive. I then expanded the boot camp partition to take up the whole drive using Mini Tool on windows 7.
Now, windows 7 shows that my drive is 465GB, but when I boot into mac, the bootcamp hard drive still reads 200GB and 300GB are "free space" even though I expanded the drive using Mini Tool.
I tried to fix this by filling up the hard drive with an extra 120 GB so it exceeded the 200GB limit that windows shows. But when I booted back into OSX to see if it had worked, none of the files were showing up in the drive, making me believe that boot camp and OS X are not reading changes I am making to the bootcamp drive when I use Windows.
How can I change this so Disk Utility shows the full size of the disc, like Mini Tool does?
I will try to upload screenshots soon.

Re-sizing Windows partitions is not supported on Bootcamp. It requires a clean install. The other option is using Winclone.
Boot Camp 5.1: Frequently asked questions
How can a Windows partition be resized after Windows is installed?
You need to delete the Windows partition using the Boot Camp Assistant, and start over to change the size of the Windows partition. Back up your important Windows files first.

Chart does not update after table changes

Similar Messages

Maybe you are looking for