Chart in pivot table not shows computed data

[related thread|http://forums.oracle.com/forums/thread.jspa?threadID=945178]
!http://img194.imageshack.us/img194/4729/asuifuadsfuiasduifuasdf.jpg!
in the example above,
"market" is put on the "rows"
"brand" is put on the "columns"
"value" is put on the "measures", and set "Show Data As -> Percent Of -> Row" for measure "value"
the table of the pivot table shows correct computed data
but why does not the chart show by computed data (percentage)????
is there any setting to show in term of percentage.
or any alternatives to achieve the goal (show in term of percentage) ????????????
thank you very much!!!

When you chart pivoted results, what type of chart are you using? You may not be able to display marketwise % in a bar chart. You may want to try out the pie chart where you can display marketwise % values.

Similar Messages

Charts and pivot tables are not generated in Seed Cache using iBots

Hi,
I have been working on OBIEE cache. I encountered few issues.
1. We scheduled ibots to run daily and deliver dashboards to seeding cache. But the cache is not getting created for some reports which have charts and pivot tables in the dashboards .
We are using OBIEE 10.1.3.3.1.
2. When an end user logs in and access dashboard, the query is hitting the database.
3. The sql query for reports which got created in server cache are not the same as sql query generated when an end user logs in to access dashboard. The difference being query generated when an end user is accessing dashboard is using aggregates.
4. Please let me know if anyone has faced same issue and any solutions.
Any help is appreciated
Thanks,
Swetha

Hi,
I have been working on OBIEE cache. I encountered few issues.
1. We scheduled ibots to run daily and deliver dashboards to seeding cache. But the cache is not getting created for some reports which have charts and pivot tables in the dashboards .
We are using OBIEE 10.1.3.3.1.
2. When an end user logs in and access dashboard, the query is hitting the database.
3. The sql query for reports which got created in server cache are not the same as sql query generated when an end user logs in to access dashboard. The difference being query generated when an end user is accessing dashboard is using aggregates.
4. Please let me know if anyone has faced same issue and any solutions.
Any help is appreciated
Thanks,
Swetha

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

Can I navigate and drill down in chart and pivot table?

In the fact, the end user want to navigate to a detail report request when drill down to the final level.
I know when use table, I can navigate on data and drill down on column.
But in chart and "pivot table", I do not find the option of interaction to achieve this.
Any suggestion?

You can drill down in charts but I just saw you can't in pivots (strange because I assumed that that must be possible)
However, you can always use guided navigation!

Import option is not showing the Data Source created using ODBC

Hi all,
I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
Can some one help me to understand the issue and to solve it.
Thanks,
Mithun

By calling your cellular data provider.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Buffer Table not up-to-date SUS System

Hi Experts,
I am working in classic decoupled scenario, where the RFx is published to SUS system.
The bidder logs into SUS system and creates Response for RFx. In case of line items more than 10, the system is giving a dump.
The Background program BBP_BID_INV_BACKGROUND_PROC is started and gives a dump in ST22.
The job log shows :Buffer table not up-to-date. Below is the detailed ST 22 Error.
The exception, which is assigned to class 'CX_BBP_PD_ABORT' was not caught and therefore caused a runtime error. The reason for the exception is: Buffer table not up-to-date
Information on where terminated
The termination occurred in ABAP program "SAPLBBP_PDH", in "BBP_PD_ABORT". The main program was "BBP_BID_INV_BACKGROUND_PROC". In the source code, the termination point is in line 81 of (Include) program "LBBP_PDHU08".
I went through other posts with the same error, but could not get any suitable resolutions. Please do let me know where to check for this.
Regards,
Krishna

We're having the same problem. Any word on how to resolve. It states also that its a BSP error in that it would not load the BSP page because of the buffer error. I tried using T_Code SWU_OBUF to perform the synchronization process, and still had no luck. Any help would be appeciared.
JD

BBP_BD 002 Buffer table not up to date

Hi,
We are hitting similar error .
We are implementing Extended Classic Scenario.
When i create shopping cart - it saves perfectly - status approved. However if i log in as SRM Administrator and check on Application Monitors - the shopping cart is shown as..
"Shopping cart 1000000133 (PReq. ): BBP_BD 002 Buffer table not up to date "
Hence this shopping cart does not come into the "Sourcing Cockpit" for further processing.
Also, i see a message - "create follow on documents not active" under buyer logon - and - check status - shopping cart - followon functions...
Appreciate if someone can share their expertise on this please.
regards
Srini
SRM Consultant

Hi experts
New fields are added to the datasource .0srm_td_cf (confirmtion data source) in BI SRM (rsa2,rsa3 transaction)
i.e. There are two fields added to the extract structure of the datasource using append structure
The values are to be populated for the new field.
I enhanced RSA5_SAPI_BADI to populate the data in the extractor.
When i check the extractor checker using rsa3 transaction code, it shows a message,
Buffer table not up to date after clicking the extraction at the bottom.
I dont know where to fix the problem like, the problem is with the BADI code or with the resulting table where the values are displayed
Additional info:
When i click the long message for the error
it shows:
Message No : bbp_pd001
Diagnosis.
In FORM LTXT_READ_DATA (function group SAPLBBP_PDLTX) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a break point in the function module 'BBP_PD_ABORT' and look at the call-up heirarchy in debuggging mode.
PLEASE suggest to resolve this issue asap
Points will be rewarded

Not showing the Data in VC application

Hi I have developed the application in VC.
It is showing the data some times , it is not showing the data. Can u please let me know what is the problem.
when i checked using the Test Data service . It is showing the data. Then i have developed step by step, in between the time i use to run the application , it was showing the data. finally i have assigned to some role and user id. then also it is showing the data.
Next day after i run the application , it is not showing the data. displaying the message .
"No Data Found".
But when i run the BAPI at the back end R/3 it is giving the data properly.
Can u tell me what might be the problem
REgards
Vijay

Hi Krishna,
check the logs in the NWA. It seems that your connection is broken down sometimes, maybe a timeout. How many records does your data service return?
Check it with external debugging of the BAPI, when you can reconstruct the error.
Best Regards,
Marcel

Calendar itmes not showing end date in list view/when opened

Hi,
Got a client with a very strange issue with meetings.
Few of the meetings are not showing end date after accepting those although he can see all meetings in calendar.
I have already checked below on his machine
switched the month view to ''low detail'' then back to "high detail"
Show end date is visible in views
Reseted view options to default
Strange thing which I have noticed during troubleshooting is that issue is happening with Exchange cached mode only and not in Online view.
Client is using Windows 7 Enterprise with office 2010 on his machine.
I hope someone can help here. Let me know if any further infomation is required.
Thanks

Outlook 2010 would read the local data in local email profile and the view setting is also stored in local configuration when someone runs it in cached mode.(Email profile in online mode would read the data from Exchange store directly)
At this point, I recommand that we create a new profile to check if we could see the end date in Outlook calendar view.
http://support.microsoft.com/kb/829918/en-us
Tony Chen
TechNet Community Support

Buffer table not up to date

hi all,
While creating a contact i am getting error as"Buffer table not up to date"..what does it mean..i am working in SRM 5.0 classical scenario...
Thanks&Regards,
Hari...

Hi Sridhar,
This issue generally comes up when the tables that store these entries get full and doesn't allow any further postings.
In most of the cases this will be the issue though for your case i can not say this is the exact issue but this may work.
At this point i don't remember the exact transaction for refreshing but inform your BASIS guys to refresh the buffer tables.They will definitely know the procedure.
Hope this resolves your issue.
Rgds,
Teja

Buffering table not up to date error message when creating a Cart

Hi Folks,
We are getting a 'Buffering table not up to date' error message when attempting to create a Cart. The error message only happens to the one end user ID only with the others not getting this error, therefore suggesting that my SRM org plan set-up is correct.
Has anyone come across this previously and what checks are available in the system to resolve this? As mentioned, the attribute check is okay and I have also removed the user ID from the SRM org plan and reassigned again but this has not corrected the problem. We are on SRM 5.
Thanks. Mike.
Message:
Buffering table not up to date
Method: GET_STRUCTURE_PATHS_UP of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_ID of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Form: USER_DETAIL_GET of program SAPLBBP_SC_APP
Form: GLOBAL_FILL of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
Form: APP_EVENT_HANDLER of program SAPLBBP_SC_UI_ITS
Edited by: Mike Pallister on Nov 5, 2008 11:44 AM

Please advise on this problem. When I try to check the Approval Overview tab for these two shopping carts.
I got a dump.can anyone help me.
Information on where terminated
    Termination occurred in the ABAP program "CL_BBP_ES_EMPLOYEE_MYS========CP" -
     in "IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 35
    of the (Include) program "CL_BBP_ES_EMPLOYEE_MYS========CM008".
    The termination is caused because exception "CX_BBP_ES_INTERNAL_ERROR" occurred
     in
    procedure "/SAPSRM/IF_PDO_DO_APV_EXT~GET_AGENT_DETAILS" "(METHOD)", but it was
     neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "/SAPSRM/CL_PDO_DO_APV_EXT=====CP "; its source
     code begins in line
    1 of the (Include program "/SAPSRM/CL_PDO_DO_APV_EXT=====CM00E ".

Extended Classic Scenario - SHC: Buffer table not up to date

Hello all,
I'm working in SRM_SERVER 550, SAPKIBKT11, and having issues using BACKEND PURCHASING ORGANISATIONS and the Extended Classic Scenario.
According to SAP note 944918 the following indicator should not be required to be set:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Activate Extended Classic Scenario --> extended classic scenario active.
I did set the Backend Purch. Grps Responsible indicator, and I did create organizational units specifically for the backend purch. grps.
We need to set the main part of all SHCs to ECS, but when I do set the indicator in customizing to "extended classic scenario = active", I get a dump in my web environment: 'buffer table not up to date'.
What is causing this failure in my SHC?
I tried to implement BAdI "BBP_EXTLOCALPO_BADI" (method DETERMINE_EXTPO) like described below here: without the line bbp_extpo_gl-bbpexpo = 'X'., I can continue and create the SHCs. Problem is though: all SHCs will get marked as Classic Scenario. So, to make sure the SHCs will always get marked as ECS, I have added this line in the BAdI. Unfortunately this immediately results in the 'buffer table not up to date' error in the SHC itself, as soon as I try to open the details of the new item.
Hope you help me out here?? It doesn't seem to be related to the BAdI, but somehow the system doesn't allow me to mark SHC items as ECS.
Thanks & Regards,
Berend Oosterhoff
SRM Consultant Accenture Technology Solutions - The Netherlands.
BAdI BBP_EXTLOCALPO_BADI:
method IF_EX_BBP_EXTLOCALPO_BADI~DETERMINE_EXTPO.
data definition----------------------------------------------------*
DATA:    wa_mattype     TYPE BAPIMATDOA,
           wa_char18      TYPE MATNR,
           attrib_tab     TYPE TABLE OF bbp_attributes,
           wa_attrib_tab TYPE bbp_attributes,
           wa_value       TYPE om_attrval,
           wa_product_id TYPE comt_product_id.
    bbp_extpo_gl-bbpexpo = 'X'.
from here I did the specific selection for the SC, but that's not relevant here.

Hi Prashant,
Thanks for your quick reply!
Note 1085700 is about Short Dumps when creating or changing a contract. I am trying to create a Shopping Cart, without a reference to a contract. BAdI BBP_DOC_CHANGE_BADI is not active in our system.
Any other thoughts?
Regards,
Berend

BSP error when clicking on line item in SUS :Buffer table not up to date

Hi Experts,
I'm having a problem in SUS Portal. When i click on a line item of a PO to display the actual line item or see more details, i get a buffer table out of date error. I saw a thread with a similar issue where it says problem resolved but haven't had any luck getting a response from the poster, so I'm putting this question out there to everyone.
Related Post
Buffer table not up to date in SUS
More details on error...
Exception Class CX_BBP_PD_ABORT
Error Name
Program SAPLBBP_PDH
Include LBBP_PDHU08
Line 81
Long text Buffer table not up-to-date {}
Regards,
JD
Edited by: julian.k. drummond on Apr 13, 2010 6:46 PM

Hi Julian,
Please give the system some time and try again. It should work.
Thanks
Hari

Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation

Hi experts,
We are running SRM 5.5 with Support Level 16.
We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
ITEM 1: HIER (Bid Outline)
ITEM 2: Line Item
ITEM 3: HIER (Bid Outline)
ITEM 4: Line Item
However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
Transaction: BBP_BID_INV
Program: SAPLBBP_PDH
Screen: SAPLBBP_BID_INV_1000
Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
In the source code you have the termination point in line 73.
Active Calls/Events
(formatted below as "No: Type: Name")
24: Function: BBP_PD_ABORT
23: Form: ABORT
22: Form: ITMADM_UPDATE
21: Form: ITMADM_MAINTAIN_SINGLE
20: Form: ITEM_F_CHECK_FROM_WTAB
19: Form: ITEMLIST_F_CHECK
18: Function: BBP_ITEMLIST_CHECK
17: Form: PROCDOC_DB_CHECK
16: Form: PROCDOC_CHECK
15: Function: BBP_PROCDOC_CHECK
14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
13: Form: STATUS_SET_AND_INTERNAL_SAVE
12: Form: PROCDOC_UPDATE
11: Function: BBP_PROCDOC_UPDATE
10: Form: CHANGE_VERSION_UPDATES_ACTIVE
9: Function: BBP_PDCV_UPDATE_ACTIVE
8: Form: PROCDOC_CHECK
7: Function: BBP_PROCDOC_CHECK
6: Function: BBP_PD_BID_CHECK
5: Form: FCODE_DOCUMENT_CHECK
4: Form: FCODE
3: Function: BBP_BID_PROCESS
2: Form: PROCESS
1: Module (PAI): PROCESS
The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
* parent guids have to be identical ...
if gt_itmadm-parent <> w_itmadm-parent.
perform abort.
endif.
Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
Any suggestions would be greatly appreciated.
Thanks!
Best regards,
Kwong How

Hi Janu,
For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
Otherwise, we will raise a message as suggested.
Thank you so much for your help!
Best regards,
Kwong How

Chart in pivot table not shows computed data

Similar Messages

Maybe you are looking for