Check Box On Standrad Selection-screen

Hi Friends
I am working on HR ABAP .I added 4 check boxes On Standrad Selection-screen. Its working on Development but its not working on production.can anyone suggest how its happend.

Hello,
A few questions.
- what exactly is not working in production?
- do the check boxes appear at all?
- did the changes get recorded on a change request and transported?
- was the transport successful?
- do the checkboxes 'work' in the QA envirionment?
Regards
Greg Kern

Similar Messages

Handling Check Boxes in the selection screen

Hi All,
I have defined 3 Check Boxes in the selection screen and one box will be ticked as 'X" by default.
I need to put restriction so that only any one should be selected as 'X' whenever user wish to select.
Hence any time, when user selects a box, other two should be unchecked.
How to put this kind of control?
Regards
Pavan

I think you should go for 'Radiobutton'
But if U want check box then
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF cb_option1 = 'X'.
      CLEAR cb_option2.
      MODIFY SCREEN.
    ELSEIF cb_option2 = 'X'.
      CLEAR cb_option1.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

How to get a check box on the selection screen

Hi all
can any body tell me how to get a check box on the selection screen

parameter: pa_check as checkbox.
To define the input field of a parameter as a checkbox, you use the following syntax:
PARAMETERS ...... AS CHECKBOX ......
Parameter is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
REPORT DEMO.
PARAMETERS: A AS CHECKBOX,
B AS CHECKBOX DEFAULT 'X'.

Problem in PRD to display check box parameter on selection screen

hi ,
i had one problem, i created one report which will show customer advances, for this report i created one selection screen, i transport req to QAS and PRD it shows fine. after that i need to add one more check box to that report selection screen. i transport reqt to QAS and PRD, in QAS it is woking fine but in PRD i am not able to see the check box which i was enterd. transport was perfect. i am saw the report coding in PRD that has the Check box statement. but it not comming,
1, why the selection screen is not showing that check box parameter ?
2, i had 19 selection fields is their any restriction to display the selection screen ?
please try to solve it for me,
thanq,
rajesh.k

Hello Rajesh,
First check the Log of your TR. whether it is transported properly without any error or with error.
again delete your Checkbox statement and write code again then try to transport again.
there is no any limitation to provide option on selection screen. you can give as per your requirement.
Regards,
Sujeet

How to create check boxes dynamically in selection screen

Hi Experts,
I have a requirement of creating dynamic check boxes based on the number of records that are retrieved from a database table.
Can you please suggest me how to achieve it.
Regards
RP.

Hey RP,
Try this way.
REPORT ztest_program .
DATA: it_data TYPE TABLE OF t001.
DATA:check    TYPE char3.
DATA:sy_index TYPE char2.
DEFINE checkbox.
parameters:&1 as checkbox.
END-OF-DEFINITION.
CHECKbox:c01,c02,c03,c04,c05,c06,c07,c08,c09,c10,
         c11,c12,c13,c14,c15,c16,c17,c18,c19,c20,
         c21,c22,c23,c24,c25,c26,c27,c28,c29,c30,
         c31,c32,c33,c34,c35,c36,c37,c38,c39,c40.
AT SELECTION-SCREEN OUTPUT.
DESCRIBE TABLE it_data LINES sy-tfill.
sy-tfill = 39. "This will be changed based on the itab records. I just hardcoded the value
sy_index = 1.
LOOP AT SCREEN.
    CONCATENATE 'C' sy_index INTO check.
    IF screen-name = check.
      IF sy_index GT sy-tfill.
        screen-active = '0'.
        MODIFY SCREEN.
        sy_index = sy_index + 1.
        CONTINUE.
      ENDIF.
      sy_index = sy_index + 1.
    ENDIF.
ENDLOOP.
Thanks
Venkat.O

Check box in ALV selection screen

Hi to all
I like to know how to create a checkbox in the input screen of an ALV.

What do you mean by ALV check box selection screen?
ALV and selection screen check box( you are mixing two cases in your Question).
You need use the Function moduel in the user command to get the updated data.
in fieldcatalog you have to use INPUT = 'X' and EDIT = 'X' for the columns which ever you want edit.
GET_GLOBALS_FROM_SLVC_FULLSCR
follow the sample code.
REPORT ZTEST_ALV_CHECK MESSAGE-ID ZZ .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT TYPE SLIS_LAYOUT_ALV,
X_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
CHK(1),
color(4),
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'CHK'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
X_FIELDCAT-INPUT = 'X'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-CHECKBOX = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-HOTSPOT = 'X'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_LAYOUT-info_fieldname = 'COLOR'.
*L_LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form STATUS
text
-->P_EXTAB text
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
Pf status
SET PF-STATUS 'STATUS'.
ENDFORM. " STATUS
*& Form USER_COMMAND
text
-->R_UCOMM text
-->RS_SELFIELD text
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA: GD_REPID LIKE SY-REPID, "Exists
REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA .
ENDIF.
loop at itab where chk = 'X'.
itab-color = 'C300'.
modify itab index sy-tabix transporting color.
endloop.
RS_SELFIELD-refresh = 'X'.
break-point.
ENDFORM. "USER_COMMAND
Regards
Vijay Babu Dudla

Dynamic check box creation in selection screen

Hello,
I am trying to put up some check boxes dynamically in a selection screen. The number: of check boxes required and the 'checkbox label text' is to be retrieved from a database table. I have retrieved all these values in AT SELECTION-SCREEN OUTPUT event. But, I dont know how to create check box parameters using these dynamic values. Please help..

hi Giffin,
Create a program with name 'Z_13317_DYN_CHKBOX' and paste the following code in it. Also make ensure that an include with name 'Z_13317_DYN_INCL' is not existing earlier because this program will be overwritten each and everytime.
Z_13317_DYN_CHKBOX will take an integer as an input. After giving input, click on the button on selection screen.
Suppose, if you have given 3 as input and if you have clicked the button, then 3 checkboxes will be generated on your selection screen.
REPORT Z_13317_DYN_CHKBOX.
types :begin of t_itab1,
 line(72),
 end of t_itab1.
data: incl type table of t_itab1 with header line.
parameters: p_tab type i,
 p_frst type c no-display.
selection-screen begin of line.
selection-screen: pushbutton 2(20) but1 user-command cli1.
selection-screen end of line.
include z_13317_dyn_incl if found.
initialization.
at selection-screen output.
if p_frst = ' '.
 p_frst = 'X'.
 perform crt_dyn_incl.
endif.
at selection-screen.
case sy-ucomm.
 when 'CLI1'.
 perform crt_dyn_incl.
endcase.
*& Form crt_dyn_incl
* text
form crt_dyn_incl .
perform populate_incl.
perform del_incl.
insert report 'Z_13317_DYN_INCL' from incl.
commit work.
submit z_13317_dyn_chkbox via selection-screen with p_frst = p_frst.
endform. " crt_dyn_incl
*& Form del_incl
* text
form del_incl .
call function 'RS_DELETE_PROGRAM'
 exporting
 program = 'Z_13317_DYN_INCL'
 suppress_checks = 'X'
 suppress_popup = 'X'
 with_cua = ' '
 with_documentation = ' '
 with_dynpro = 'X'
 with_includes = ' '
 with_textpool = ' '
 with_variants = ' '
if sy-subrc <> 0.
endif.
endform. " del_incl
*& Form populate_incl
* text
form populate_incl .
data: v_cnt type n.
do p_tab times.
 v_cnt = v_cnt + 1.
 incl-line = 'parameters: '.
 concatenate incl-line 'p_chk' v_cnt into incl-line.
 concatenate incl-line 'as checkbox.' into incl-line separated by space.
 append incl.
 clear incl.
enddo.
endform. " populate_incl
Regards,
Sailaja.

How to get System status Check Boxes into Query selection screen

Dear experts,
Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PM

Problem solved through other Forum
(Checkboxes not possible, some alternative solution to my requirement found)

How to create Option Boxes IN A SELECTION SCREEN

How to create Option Boxes IN A SELECTION SCREEN.
Thanks!

Hi Rajesh,
The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
CHECK BOX :
AS CHECKBOX [USER-COMMAND fcode]
Effect:
This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Notes
If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
Coding :
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
 p2(10) TYPE c,
 p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4(10) TYPE c MODIF ID bl2,
 p5(10) TYPE c MODIF ID bl2,
 p6(10) TYPE c MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
RADIO BUTTON COMMAND :
RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
CODING :
tables : mkpf,mseg,ekko.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
 c as checkbox.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
write :/ p_werks,
 / s_ebeln.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Let me knwo if any doubts.
Reward with points if it helpful
Regards,
Vijay

Index of Values in the List Boxes on a Selection Screen

Hi,
I have a list box on the selection screen for Month field. It has the values Jan, Feb, Mar....etc in it.
These entries, I added thru the VRM_SET_VALUES.
Now, I want to default the month to current month SY-DATUM+4(2).
Is there any FM to which I can send this SY-DATUM+4(2) as an Index and the corresponding value gets set for the Month field.
As an alternatvie, I could use Case Sy-DATUM+4(2). when '01'. p_month = 'Jan'. etc etc.. But I want to avoid this big case statement.
Please suggest.
Thanks,
Suryakiran D.

Hi Suryakiran,
Try to use the func MONTH_NAMES_GET.It will
return the month name along with the number.
And also you can directly select from table T247
Thanks&Regards,
Siri.
Message was edited by: Srilatha T

Re- Single click in the check box ensure to select all check boxes

Hi All,
I have an issue to notify the urgency of the cart to the buyer while creating the cart.For that scenario we have a check box in the Basic data of shopping cart.I added the check box in the basic data. Now the quote check box is available for all the line items.
The requestor can select any check box in any line items,so whenever he selects the check box- automatically all the check box should get selected , if any of the check box get deselected then imediatelely all the check box in different line items also should get deselected.

Hi Batchu,
Thanks for your reply, See if you add any custom field it will come one by one in the basic data section. Adding one more check box doesnot work for this case.
Moreover the problem is change to any particular line item can be captured in DOC_CHANGE_BADI but i cannot bring the same change to all line items (ie) If 3 rd line item check box is marked then immediately rest of the line item also should get marked.
In the case of DOC_CHECK_BADI to identify the line on which the change happens is tough.
SO thats is the problem for me to bring the logic in the code.
Please if any one come across similar kind of issue please give your suggestion.
Thanks,
Sibi

To add a check box in the login screen

Hi,
I need to put a check box in the login screen of CRM below the LOGON button with a message :'I agree with the terms and condition of the System'.
Please help.

See: Improve PDFs: Create interactive PDF checklists

How to Create a DropDown Box in a Selection Screen.

Hi,
I have a question. i.e, How to create a dropdown box in a Selection Screen. Could you please assist me.
Thanks & Regards
Sathish Kumar

hi satish,
The following can assist u to create a drop down ....
Drop down list box can be created in a dialog screen(SE51) as well as selection screen.
The sap list box allows to select a value from the list but we cannot enter our own value in the list box .The value list that will be displayed consists of two
fields TEXT field of TYPE 80(C) and internal KEY field of TYPE 40(C).
In screen painter to create a input/output field into list box we use
'L" as a value for dropdown attribute for the i/o field.
In screen painter to determine the type of method that will be used to fill the value
list we use the attribute value list.
If it is blank the value list will be filled by the first column of the input help assigned to the screen field.This input help can be defined in the ABAP Dictionary, on screen using SELECT,VALUES screen statements or in event POV (PROCESS ON VALUE-REQUEST ) and the input help that will be passed to the field should consists of 2 columns ,the key column is filled automatically by the system.SAP recommends value list field should be blank.
or
The value can be 'A' meaning that the value list will be filled in the event PBO(PROCESS BEFORE OUTPUT) or before the screen is displayed.In this method we use function module VRM_SET_VALUES to fill the values and pass it to the i/o field.
If a function code is attached to the list box the selection of a value triggers a PAI
otherwise PAI will not trigger.
Example
Dropdown list boxes
REPORT DEMO_DYNPRO_DROPDOWN_LISTBOX.
TYPE-POOLS VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST.
DATA: WA_SPFLI TYPE SPFLI,
      OK_CODE LIKE SY-UCOMM,
      SAVE_OK LIKE SY-UCOMM.
TABLES DEMOF4HELP.
NAME = 'DEMOF4HELP-CONNID'.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE INIT_LISTBOX OUTPUT.
CLEAR DEMOF4HELP-CONNID.
SELECT CONNID CITYFROM CITYTO DEPTIME
    FROM SPFLI
    INTO CORRESPONDING FIELDS OF WA_SPFLI
   WHERE CARRID = DEMOF4HELP-CARRIER2.
    VALUE-KEY = WA_SPFLI-CONNID.
    WRITE WA_SPFLI-DEPTIME TO VALUE-TEXT
                           USING EDIT MASK '__:__:__'.
    CONCATENATE VALUE-TEXT
                WA_SPFLI-CITYFROM
                WA_SPFLI-CITYTO
                INTO VALUE-TEXT SEPARATED BY SPACE.
    APPEND VALUE TO LIST.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            ID              = NAME
            VALUES          = LIST.
ENDMODULE.
MODULE USER_COMMAND_100.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'CARRIER'
     AND NOT DEMOF4HELP-CARRIER2 IS INITIAL.
    LEAVE TO SCREEN 200.
ELSE.
    SET SCREEN 100.
ENDIF.
ENDMODULE.
MODULE USER_COMMAND_200.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'SELECTED'.
    MESSAGE I888(BCTRAIN) WITH TEXT-001 DEMOF4HELP-CARRIER2
                                        DEMOF4HELP-CONNID.
ENDIF.
ENDMODULE.
Reward if useful.
Thank you,
Regards.

How to create the list box in the selection screen.

hai friends..
i want to create the list box for the selection screen input boxes.
thanks,
velu.

hi..
1. There are two important things :
a)PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
b) Fm VRM_SET_VALUES
2. just copy paste
3.
REPORT abc.
TYPE-POOLS : vrm.
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
INITIALIZATION.
vw-key = '1'.
vw-text = 'Jan'.
APPEND vw TO v.
vw-key = '2'.
vw-text = 'Feb'.
APPEND vw TO v.
vw-key = '3'.
vw-text = 'Mar'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'A'
values = v
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
regards,
veeresh

List Boxes on a Selection Screen

Hi,
I have a list box on the selection screen. In the At Selection Screen Output, I filled the List box with 12 Values.
Now, I want to default the List box value with one of those values.
So, after the CALL FM 'VRM_SET_VALUES', I say p_field = 'Value'.
But this Value is being shown in the Drop down list twice.
I could not understand the mistake.
Please suggest.
Thanks,
Suryakiran D.

Hi suryakiran,
1. Its happening bcos
   u must be giving NAME
2. give p_field = Key
3. ie. 1 for Jan
        2 for Feb etc
in the FM VRM_SET_VALUES
we are filling the parameter VALUES
VALUES-key
VALUES-TEXT
so, give KEY, (and not text)
after calling this FM.
4.
REPORT abc.
TYPE-POOLS : vrm.
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
INITIALIZATION.
vw-key = '1'.
vw-text = 'Jan'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'A'
      values          = v
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
      a = '1'.
Problem
      a = 'Jan'.
regards,
amit m.
Message was edited by: Amit Mittal

Check Box On Standrad Selection-screen

Similar Messages

Maybe you are looking for