Check in Document: Kpro Screen Help

HI All,
I just installed SAP content server 6.40.  Everything is green and running in CSADMIN so I think it is working correctly.  I tried to test it by checking in a document in CV01N, but I get stuck when I try to check it in.  I click "Check in Original" and a screen pops up asking me to choose the Storage Category.  My content server does not show up in the list.  How do I get it to show up so I can check a document in?
Thank you,
Shelby

Hi,
Create content strorage category in OACT. Once it is done, it will appear in CV01N while saving original.
Anirudh,

Similar Messages

  • F1 help for Check Box on Selection-Screen

    Hi Friends,
    I want to attach F1 help for a check box on selection-screen. Though I have checked SDN community for this but did not get any relevant answer.
    so, please give me correct example if someone has done similar.
    Regards
    Pradeep

    Pradeep,
    I think this fucntion module needs to be used DD_SHLP_CALL_FROM_DYNP.If possibe try to screen debug using /H before pressing f1 for a field.
    K.Kiran.

  • Vendor evaluation end user document with screen shots

    Hai Experts,
    I want vendor evaluation end user document with screen shots.Please provide me.

    Hi,
    SAp help document might help your requirement , check.
    Regards,
    Andra

  • Office 2013 vs SharePoint 2010 - Unable to check out documents to SharePoint drafts folder

    My company is foisting Office 2013 on us without upgrading SharePoint 2010 Enterprise. One of the issues I have discovered since receiving Office 2013 is that SharePoint no longer provides the option to save checked out documents to my local drafts folder.
    This is despite having Office set to save checked-out files to the server drafts location and the Office Document Cache Handler enabled in IE9. Is there a registry setting or something I can change that will re-enable this feature?

    Hi Nellie,
    According to your description, my understanding is that you want to re-enable the add-on Office Document Cache Handler in IE9.
    We can re-enable the add-on in IE9 using Group Policy:
    Launch the Group Policy Editor. 
    Go to User Configuration > Administrative Templates > Windows Components > Internet Explorer > Security Features > Add-on Management > 
     Add-on List.
    Set this policy to 'Enabled'.
    In the Add-on List, add the CLSID of BHO (Browser Helper Object) (i.e.) {B4F3A835-0E21-4959-BA22-42B3008E02FF} as the ‘Value Name’ and 1 as the 'Value'.
    Log out of the machine and log back in again for the setting to take effect.
    More references:
    http://support.microsoft.com/kb/2463597/en-us
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How can I disable a check box in one screen?

    Hi,
    I need to disable a check box in the screen 1106 on the program of the transaction F110. I can do that with a user exit or what I can use to do that?
    Thanks!

    you have two options :
    user exit  , check if there is one for this transction
    i attach program below .
    field exit  :
    Within the CMOD transaction type PRFB in the transaction window.
    PRFB is the ok-code to bring up the field exits.
    You can also use Program RSMODPRF to create field exits.
    hope its help u .
    program for user exut  :
    *& Report  ZUSEREXIT                                                   *
    report zuserexit no standard page heading .
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
      select single * from tadir where pgmid = 'R3TR'
                                   and object = 'PROG'
                                   and obj_name = tstc-pgmna.
      move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
        select single * from trdir where name = tstc-pgmna.
        if trdir-subc eq 'F'.
          select single * from tfdir where pname = tstc-pgmna.
          select single * from enlfdir where funcname =
                                              tfdir-funcname.
          select single * from tadir where pgmid = 'R3TR'
                                    and object = 'FUGR'
                                    and obj_name eq enlfdir-area.
          move : tadir-devclass to v_devclass.
        endif.
      endif.
      select * from tadir into table jtab where pgmid = 'R3TR'
                            and object = 'SMOD'
                            and devclass = v_devclass.
      select single * from tstct where sprsl eq sy-langu and
                                       tcode eq p_tcode.
      format color col_positive intensified off.
      write:/(19) 'Transaction Code - ',
           20(20) p_tcode,
           45(50) tstct-ttext.
      skip.
      if not jtab[] is initial.
        write:/(95) sy-uline.
        format color col_heading intensified on.
        write:/1 sy-vline,
               2 'Exit Name',
              21 sy-vline ,
              22 'Description',
              95 sy-vline.
        write:/(95) sy-uline.
        loop at jtab.
          select single * from modsapt where sprsl = sy-langu and
                                             name = jtab-obj_name.
          format color col_normal intensified off.
          write:/1 sy-vline,
                 2 jtab-obj_name hotspot on,
                21 sy-vline ,
                22 modsapt-modtext,
                95 sy-vline.
        endloop.
        write:/(95) sy-uline.
        describe table jtab.
        skip.
        format color col_total intensified on.
        write:/ 'No of Exits:' , sy-tfill.
      else.
        format color col_negative intensified on.
        write:/(95) 'No User Exit exists'.
      endif.
    else.
      format color col_negative intensified on.
      write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    at line-selection.
      get cursor field field1.
      check field1(4) eq 'JTAB'.
      set parameter id 'MON' field sy-lisel+1(10).
      call transaction 'SMOD' and skip first   screen.

  • G/L account no assigned cheque numbers in Document Overview screen (FB03)

    Hi there,
    I currently have an issue wherein cheque numbers are not assigned on the document overview - display screen.  Payment run and Cheque run have been initiated.  Checking on SAP table PAYR-CHECT, cheque number is assigned to the relevant doc number.  Checking on BKPF-XBLNR, the cheque run reference number is populated.
    Can you please advise me why the cheque number is not assigned to the G/L account in the document overview screen but if you check on the table PAYR, the cheque number is visible?
    Please let me know what are further checks I need to do to isolate on the issue.
    Cheers,
    Patvin

    Hello
    I dont quite get you. Do you mean to say that in the clearing document generated in the payment run the check number should appear somewhere.
    If you see the description of PAYR table, it stands for Payment Medium File.
    So it appears here tagged to the clearing document.
    Rgds

  • I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    @Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
    UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
    Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
    You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
    Exit out of Outlook and reboot your machine.
    Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
    Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
    IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
    You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
    Everything should now sync pretty seamlessly.
    I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
    Arthur P. Johnson

  • Getting error Failed to check in document from ODC to UCM 11g

    Hi:
    I am getting the below error while trying to commit image from ODC running on windows to UCM 11g running on linux
    SEVERE Failed to check in document. Exception: {0}. Error is: oracle.stellent.ridc.protocol.http.HttpProtocolException: HTTP/1.1 302 Moved Temporarily
         at oracle.stellent.ridc.protocol.http.IdcHttpProtocol.writeRequest(IdcHttpProtocol.java:171)
         at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:140)
         at com.oracle.capture.UCM11g.Driver.checkIn(Driver.java:192)
         at com.oracle.capture.UCM11g.ComDriver.checkIn(ComDriver.java:42)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.jniwrapper.win32.com.server.IDispatchServer.invoke(SourceFile:209)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.b(SourceFile:232)
         at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.callback(SourceFile:135)
         at com.jniwrapper.Callback.enterPoint(SourceFile:222)
         at com.jniwrapper.Function.invokeCFunc(Native Method)
         at com.jniwrapper.FunctionCall.a(SourceFile:126)
         at com.jniwrapper.FunctionCall.call(SourceFile:34)
         at com.jniwrapper.Function.invoke(SourceFile:188)
         at com.jniwrapper.Function.invoke(SourceFile:212)
         at com.jniwrapper.win32.MessageLoopThread$LoopThread.run(MessageLoopThread.java:489)
    Can anyone help me to correct this error?
    Thanks & Regards,
    Raj
    Edited by: user13270764 on Dec 8, 2010 10:59 PM

    Raj,
    Are you using the 11g commit driver for ODC. Do you have the URL in the correct form:
    http://Instance/web root//idcplg&AUTH=INTERNET
    Thanks
    Data_Bitz

  • LEdger selection in document Entry screen

    Hi,
    I have activated multiple ledgers, now in the entry screen I want to select the non Leading ledger for posting.I'm not able to select ledger in the document entry screen.
    PL. tell me how to activate this field in the entry screen.
    doing this on ECC6.0
    points would be awarded.
    thanks in advance.
    ciao
    ramp

    Hi,
    In parallel ledger concept, if you want to post the entries in particular ledger group separate transaction codes are there
    FB50L and FB01L
    here you can see the option "Ledger Grp"
    if you post it in leading ledger it update the all ledger based on your accounting rule, if you have posted in non leding ledger it update the particular non leading ledger.
    if you want to more about this log on to the following link.
    http://help.sap.com/saphelp_erp2005vp/helpdata/EN/2d/830e405c538f5ce10000000a155106/frameset.htm
    assign points if its useful

  • To fetch metadata of previous checked in document

    Hi All,
    Is there a way to fetch metadata value of immediate previously cheked in document of a particuler type.
    Is there a way to interact with database directly from ucm...something like querrinng the database directly thru idocscript or thru the script segments available in the ucm under the rule for profiles tab.
    Or any other suggestion to go abt it.
    Thanks in Advance.

    Hello,
    I think you should write a little bit more about how your scenario looks like in the real life.
    1. the first thing I think of is "Check in Similar" button which appears on the screen when you check in a new item
    2. however, what is "immediate previously checked in document of a type" for you? Do you want use the metadata field "Document Type"? Or, is the distinction based on anything else (e.g. profiles)? Do you want the document of this user, or of any user, who could check it in parallel?
    As for querying the database, do you want to use it to reach the scenario above? Or anything else?
    There are several ways how to reach database from UCM. If you want to use it for the scenario above I guess your first option will be a custom component, which will create a new service for you (unless you can use a standard one). Within this service you will create few queries - custom components provide a framework to do so quite easily.
    J.

  • Providing on-screen help in flash RIA application

    Dear Friends,
    I have a requirement to implement a feature like providing on-screen help related to the panel/control/form(which helps the use who is using my application) i loaded in the browser.
    Any idea or any direction is appreciated.
    Regards,
    Prakash.

    Hi nikos,
    Thanks for your reply. which file format i have to use so that the team who is creating help, can give me that file format. and i can access. usually .hlp file is using for standalone project. for web which file format is best to fetch help details.
    The senario is, if i press F1 on textbox, it should give me a help from the help document and produce information about that field entry.
    I am using flash builder to develop my application.
    Please give me any idea..
    Regards,
    Prakash.

  • How to check A document library that has document publishing enabled and content approval

    HI
    1) how to check A document library that has document publishing enabled
    2)A document library or a list that has content approval enabled
    adil

    For both question, check version settings of that library
    >>1)Document Version History "Create
    a version each time you edit a file in this document library?" should set to either create major versions or Create
    major and minor (draft) versions.
    http://office.microsoft.com/en-us/sharepoint-server-help/publish-or-unpublish-a-version-of-a-file-HA101862529.aspx
    >>2)Content Approval  "Require
    content approval for submitted items?" should be set to Yes
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • Checking parked documents before month change in OB52

    Hi
    I have following requirement:
    I park FI document in Novemeber. It was not posted to books of account. But i closed my november month in OB52 without checking parked document list. It gave little problem to me.
    Now i want to know is there any settings where system will pop out (at the time of OB52) that the month is not complete. It means there are some documents pending to be posted or depreciation run is not done, etc.
    Please help.

    Hi Expert,
    You can open the November month, which is not suggested.
    But, you post the parked documents in special periods(i.e., 13,14, 15 and 16)
    We use special periods for adjustment postings...
    Regards,
    GK
    SAP

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • HT4623 my iphone 3 when turned on shows  a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!

    my iphone 3 when turned on shows  a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!

    Do what you are being told. Plug the phone into a computer running iTunes and restore the phone.

Maybe you are looking for