Check in MIGO for the excise tab

Hello Guru's,
We are trying to put the check for the Sub Transaction type in MIGO. As we capture and post Excise in MIGO itself.
We have tried but none of the Excise CIN exits are firing in the MIGO transaction.
Can anyone please suggest any BADI or exit which you have used for Excise and which fires in MIGO transaction.
Thanks in advance,
Sam

Hi
Check Below
MB_MIGO_BADI
MB_CIN_LMBMBU04
MB_CIN_MM07MFB7
MB_CIN_MM07MFB7_QTY
Regards
Edited by: Sachin on Oct 15, 2009 10:47 AM

Similar Messages

Additional tab item level on MIGO supresses the excise tab at item level

Hello Experts,
I have used MB_MIGO_BADI to add an additional tab at item level.It is working properly.
But now Iam facing a problem the additional tab supresses the excise tab that comes up dynamically at the item level,.
Now how do i reslove this problem.
Since excise details are entered later and the tab comes up dynamically my tab should not supress the excise tab at item level
it should come after the excise tab.
Now do I set this.
Please help . highly appreciated.
Regards,
Ranjith N

Hi Balu,
Thanks for your reply.
I dint get you what you have explained.
Hope you are clear with my problem.
I have created a subscreen 'ZMIGOITEM' with screen number '9000'.
In the PBO of BADI MB_MIGO_BADI I have displayed this subscreen.
This is getting displayed at item level when I call Tcode 'MIGO'.
After fillin up the details for performing GR..and when I check it it gives me a warning to fill in the excise details when I fill in the excise details at header level and check as per the standards an excise tab at item level should come up right ?
Since i have added a additional tab the excise tab doesn't come up....the additional tab supress it ...
Regards,
Ranjith Nambiar

Need to capture the excise for the excise tab missing item in GR

Hi Masters
Our users has done MIGO with one line item(for Material A) with excise item tab and other line item(fro MAterial B) without excise item tab(non availability of Chapter ID).
They are able to capture excise in J1IEX for the first item only with the help of GR document.
But they want to capture the excise for the second line item?
When we process the same GR document in J1IEX once again it shows error that documeny has been already processed.
How to resolve this?
Regards
Mohanraj.C

Hi,
If u have done only GR for Both materials then Cancel ur GR and Post it again.
And if you have Done J1iex for first material then Cancel GR first then Cancel Excise Invoice.
Now to cancel Excise Invoice follow the path as
From the SAP Easy Access screen, choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods Movement (MIGO).
In the top line:
Select Cancellation.
Select Material document.
Enter the number of the goods receipt that you want to cancel
Choose .
Flag all of the line items as OK.
Save the reversal document.
Reversing CENVAT Postings
From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
In the top line:
Select Post CENVAT.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Choose Simulate CENVAT.
A dialog box appears, showing which postings the system will make to reverse the CENVAT.
To close the dialog box, choose .
Choose Post CENVAT.
Canceling Excise Invoices
From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
In the top line:
Select Cancel.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Save the excise invoice
if Not solved then please specify that is error by system.
Regards,
Pardeep malik

BED, AED and SED for the excise item is zero

Dear ALL,
I am working on IMPORT MATERIAL GOODS RECEIPT,
While doing MIGO in excise item tab BED, AED, SED values are visible and material document is generated, but while posting PART1 ENTRIES through J1IEX System is throwing error" BED, AED and SED for the excise item is zero" and the excise values are not flowing in to PART1,
IN J1IEX PART1 Entries
1.IN DUTY RATE TAB all the entries like BED, AED, SED are zero,
2. IN DUTY VALUES TAB all entries are zero
ERROR MESSAGE NO 4F122
Please suggest
ARABBAS

Dear,
Please check this,
[Excise;
[BED Value not defaulted in GR;
Sandip

Maintain Vendor for the excise invoice

Dear Guru's,
While creating goods receipt (In STO Process), I am facing the following error,
"Maintain Vendor for the excise invoice"
How to solve this one.
Regards,
CS

Hi CS,
Check whether you had maintained the vendor(supplying plant) in J1ID and also check whether excise indicator 1 is there.
And also check whether vendor (supplying plant ) is linked with customer in vendor master in Account control tab and also check whether vendor master (supplying plant) is linked to your customer master in control data ....
Hope this will serve you..
regards,
Patil

BED, AED and SED for the excise item is zero,Message no. 4F122

Hi,
While doing GR system issuing msg " BED,AED and SED for the excise item is zero.Message no. 4F122,
Chapter ID,mat chapter ID Comb,Cenvat determ,Vendor excise ,excise tax rate Maitained properly and cross verified twise.
We are using TAXINJ procedure. Tax code maintaied and % maintained for Tax code.
Any bady point out what exaclty CIN config missed out? why PO tax value are not flowing in MIGO.
After manully putting value in MIGO also excise invoice (Capture excise invoice ) is not getting created. i am not able to view in J1IEX.
Regards,
Anil

Hi anil kumar,
I think you have maintained the any of these Excise details.
Maintain
>Chapter ID
>Material & Chater ID Combination
>Assesable Value
>Cenvat Determination
>Vendor Excise Details ( Check the Excise Indicator) as 1
>Check the tax code assigned
Please maintain and let me know.
Thanks,
Swamy H P

Maintain pricing conditions for the material for the excise invoice date

When I am doing MIGO (Release GR Blocked Stock-movement type) t)he system is giving an error "Maintain pricing conditions for the material for the excise invoice date"I am attaching screen shot for reference.
I request if any one can provide me the solution

Hi,
Check did you have entry of that movement type in the following path where you specify which movement type relating to goods receipts involve excise invoices
SPRO -
> Logistics general -> tax on Goods Movements-> India -> Business Transactions--> Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

CIN - BED, AED & SED for the excise item is ZERO

DEAR ALL,
I am testing the CIN scanario with tax procedure TAXINJ.
While making GRN at excise invoice tab message is coming " BED, AED and SED for the excise item is zero" adn no any values for BED, AED and SED are flowing,
Value for BED is maintained in J1ID for the chapter ID. Also Tax code is created with JMO1 - IN: A/P BED deductible and value mainatained is 14 %.
PLease confirm me where I amd doing wrong ? Also please tell in TAXINJ on what paramaters the excise flows and shows the values while GRN OR whil posting a excise invoice ?
Regards,
Rakesh

Dear ALL,
Below are the steps / settings I have done,
01. Copied TAXINJ to create tax procedure say ZAXINJ and assigned to country IN.
     - Please confirm what needs to be AltCty & AltCBV for JMO1, JMOD, JMOP ?
02. Excise defaults maintained as per TAXINJ for ZAXINJ.
03. Acces sequenece maintained for JMO1, JMOP, JMOD is MWST - Tax code.
04. Then created Tax code say T1 - and % maintained as below
       JMO1 - 100 %
       JMOP - 100 %\
05. J1ID - maintained for vendor, plant, material etc.
05. Excise rate maintained in J1ID for chapter ID as 14 %.
06. Chapter ID maintained in material master.
07. PO created for the material with tax code T1 for the said vendor.
Still while GRN message comes "BED, AED & SED for the excise item is ZERO" and BED is not getting populated for BED.
Please confirm where I went.
Waiting eagerly for the valuabale inputs..
Regards,
Rakesh

Maintain Vendor for the excise invoice Message no. 4F185

I am doing stock transfer PLANT to PLANT.
ME21N, VL10D, VF01 and J1IIN it was save properly.
After that I make MIGO. That time Error show "Maintain Vendor for the excise invoice Message no. 4F185"
MIGO time I am changing Indicator for material type FG to RM.
I am maintaining Vendor (Acct Control as Customer) & J1ID data also.
I am maintaining Customer (Acct Control as Vendor) & J1ID data also.
Please do needful
Alpesh

Hi Alpesh,
Please find the below links
Error : Maintain Vendor for Excise Invoice
Vendor error in STO ????
Hope this links helps you
Dasaradha

Transaction MM02 - Restriction for the clasification tab

Hi,
My client requirement is to restrict the users while accessing the transaction code MM02 for the classification tab.
Under the classification tab users should not allow to make a new enter and delete the existing entry under class area and Characteristic area.
And I can able to restrict new entry and deletion of the existing entry under class area with respective of the existing auth.object M_MATE_STA.
But i cant able to restrict the Characteristic area with respective of its class.
I mean in the same screen below half of the screen contains Characteristic area and it also contains delete and new entry option which I canu2019t able to de-activate them.
So please suggest me the best solution.
Business Process - MM02 - Entry the material and select the basis data 1,2 and classification then go to classification tab and there will contains class area and Characteristic area.
Thanks & Regards
SV

Hi SV,
Please check the below auth objects, If I understood your issue correctly you can restrict the usage of characteristics through the below objects.Please check the SAP help on these, it has very useful information about characteristics and org areas.
C_TCLS_BER Authorization for Org. Areas in Classification System
C_TCLS_MNT Authorization for Characteristics of Org. Area
Regards,
Nanda

GL account has not been assigned for the excise a/c in customization

HI ,
When i try to post MIGO for PO i am getting the following error message .Please help me to solve this issue
GL account has not been assigned for CLEAR in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types
Thanks & Regards,
Senthil

HI
I have maintained as you mentioned but i am getting the same error message.
Here i am using INT Charts of account and also i have one question when determining account for Excise whether we have to maintain CAIN charts of account please clarify me on this issue
Give me a good solution for the above issue
Thanks & Regards,
Senthil.

Why does a box appear under the pointer with words for the last tab clicked on?

When I am searching for something I get to a site and the pointer can be anywhere and then a small box appears under the pointer with words for the last tab clicked on. If I move the pointer the box disappears and then reappears at the new location. How can I stop that from happening??

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs.

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs. This is important as otherwise while I am in the app tab, i mistakenly start browsing from that tab and meaning of the app tab is completely lost...

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

Error in "Checking Availabe Space for the DB2 UDB for Unix..." phase

Hello,
We are in the middle of an Upgrade proyect from R/3 4.6C (kernet 4.6D EXT) to ECC 6.0.
As a first step we are doing an Heterogenous System Copy to migrate from servers with HP-UX B11.11/Informix 9.4 to servers with AIX 5.3/DB2 UDB 8.
We already did the database import with no errors. When we are installing R3 4.6C in the target server we are getting u201CMemory Fault (coredump)u201D error in the u201CChecking Availabe Space for the DB2 UDB for Unix, Windows Tablespacesu201D phase.
Any advice will be appreciated.
Best Regards
Francisco

Hello Paul,
There is no db2diag.log. We are in the first steps of the installation.
Operating System logs just shows an ABNORMALY TERMINATION OF SOTWARE error.
This is the CEDBMIG.log
INFO 2010-08-04 10:12:00 CommandFileController SyFileCopy:150
    Copying source file CEDBMIG.R3S to target file CEDBMIG.R3S.30 ...
INFO 2010-08-04 10:12:01 Main
    Preparation successfully completed.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
    checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
    offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
    host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
    offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
    The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
    The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
    The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
    Creating coprocess /usr/sbin/lsattr -El sys0 -a realmem ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:100
    The process lsattr puts out:
     realmem 8388608 Amount of usable physical memory in Kbytes False
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:700
    Physical RAM size is 8192 MB.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:100
    Retrieving swap space size ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
    Creating coprocess /usr/sbin/lsps -s ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
    The process lsps puts out:
     Total Paging Space   Percent Used
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
    The process lsps puts out:
           8192MB               1%
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:500
    Currently activated swap space is 8192 MB.
INFO 2010-08-04 10:12:31 CENTRDBINSTANCE_IND_DB6 InternalWarmKeyCheck:0
    The installation phase is starting now. Please look in the log
    file for further information about current actions.
INFO 2010-08-04 10:12:31
    Requesting Installation Details
INFO 2010-08-04 10:12:31
    Reading and Checking DB2 UDB for UNIX, Windows Specific Keys
INFO 2010-08-04 10:12:31
    Select the DB2 Storage Management.
INFO 2010-08-04 10:12:31
    Choose the number of storage paths for DB2's Automatic Storage
    Management.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
    The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
    The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
    The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:31
    Requesting Information on CD-ROMs
INFO 2010-08-04 10:12:31
    Calculating RAM Distribution
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Dispatcher
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Gateway Service
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Secure Gateway Service
INFO 2010-08-04 10:12:31
    Creating the Service Entry for the Message Server
INFO 2010-08-04 10:12:31
    Creating the SAP Administration Group sapsys
INFO 2010-08-04 10:12:32
    Creating the Database Administration Group db<dbsid>adm
INFO 2010-08-04 10:12:32
    Creating the Group db<dbsid>ctl
INFO 2010-08-04 10:12:32
    Creating the Group db<dbsid>mnt
INFO 2010-08-04 10:12:32
    Creating the SAP connect user
INFO 2010-08-04 10:12:32
    Setting Password of the SAP connect user
INFO 2010-08-04 10:12:32
    Creating the db2<sapsid> User
INFO 2010-08-04 10:12:32
    Setting the User Password
INFO 2010-08-04 10:12:32
    Creating the SAP System Administrator
INFO 2010-08-04 10:12:32
    Setting Password for for the SAP System Administrator
INFO 2010-08-04 10:12:32
    Creating Directories
INFO 2010-08-04 10:12:32
    Creating Symbolic Links
INFO 2010-08-04 10:12:32
    Getting Minimal Size of the Database
INFO 2010-08-04 10:12:32
    Changing DB2 UDB for UNIX, Windows Tablespace Data
INFO 2010-08-04 10:12:32
    Checking if Required Directories Exist
INFO 2010-08-04 10:12:32
    Checking Available Space for the SAP Instance
INFO 2010-08-04 10:12:32
    Checking Available Space for the DB2 UDB for UNIX, Windows
    Tablespaces
This is the CEDBMIG.R3S log
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@DB_HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@DB_HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@DB_HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_OSUSERSIDADMENVIRONMENT_IND_DB6]
100_GROUP=sapsys
100_OWNER=@LOWER_SAPSYSTEMNAME@adm
100_PERMISSION=0644
100_SOURCE=@HOME@/.login
100_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
110_SOURCE=@HOME@/.login
110_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
120_GROUP=sapsys
120_OWNER=@LOWER_SAPSYSTEMNAME@adm
120_PERMISSION=0644
120_SOURCE=@HOME@/.cshrc
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_R3DIRECTORIES_IND_IND]
101_PATH=@SAPDIR@
101_PERMISSION=0775
101_SET_FILE_ATTRIBUTES=YES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_PATH=@SAPDIR@/tmp
103_PATH=@SAPDIR@/trans
104_PATH=@SAPDIR@/trans/tmp
104_SET_FILE_ATTRIBUTES=NO
105_PATH=@SAPDIR@/trans/EPS
106_PATH=@SAPDIR@/trans/EPS/in
107_PATH=@SAPDIR@/trans/EPS/out
108_PATH=@SAPDIR@/trans/EPS/log
109_PATH=@SAPDIR@/trans/bin
110_PATH=@SAPDIR@/trans/buffer
111_PATH=@SAPDIR@/trans/cofiles
112_PATH=@SAPDIR@/trans/data
113_PATH=@SAPDIR@/trans/etc
114_PATH=@SAPDIR@/trans/log
115_PATH=@SAPDIR@/trans/sapnames
120_PATH=@SAPDIR@/@SAPSYSTEMNAME@
120_PERMISSION=0751
120_SET_FILE_ATTRIBUTES=YES
121_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
121_PERMISSION=0755
122_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe
123_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/opt
124_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen
125_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/opt
126_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/dbg
127_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/src
128_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
129_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/data
130_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/log
131_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
131_PERMISSION=0775
132_PATH=@SAPMOUNT@
140_PATH=@SAPMOUNTEXE@
141_PATH=@SAPMOUNTPROFILE@
141_PERMISSION=0755
142_PATH=@SAPMOUNTGLOBAL@
142_PERMISSION=0700
150_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/sec
160_PATH=@STARTDIRECTORY@
160_PERMISSION=0777
[Z_R3DIRPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNT@
101_PERMISSION=0755
101_TRAVERSE=
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0710
103_TRAVERSE=
103_USERGROUP=db@LOWER_DB_SID@adm
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPDIR@/@SAPSYSTEMNAME@
105_PERMISSION=0755
105_TRAVERSE=
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_TRAVERSE=
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0777
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
130_CHANGE_ON_NFS=NO
130_PATH=@STARTDIRECTORY@
130_PERMISSION=0777
130_TRAVERSE=
130_USERGROUP=sapsys
130_USERNAME=@LOWER_SAPSYSTEMNAME@adm
140_CHANGE_ON_NFS=YES
140_PATH=@SAPDIR@/trans
140_PERMISSION=0775
140_TRAVERSE=
140_USERGROUP=sapsys
140_USERNAME=@LOWER_SAPSYSTEMNAME@adm
141_CHANGE_ON_NFS=YES
141_PATH=@SAPDIR@/trans/bin
141_PERMISSION=0775
141_TRAVERSE=
141_USERGROUP=sapsys
141_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3FILEPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNTEXE@
101_PERMISSION=0755
101_TRAVERSE=SUBDIRECTORIES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=FILES
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0700
103_USERGROUP=sapsys
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=SUBDIRECTORIES
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPMOUNTPROFILE@
105_PERMISSION=0755
105_TRAVERSE=FILES
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
106_CHANGE_ON_NFS=NO
106_PATH=@SAPMOUNTEXE@/saposcol
106_PERMISSION=04755
106_USERGROUP=sapsys
106_USERNAME=root
112_CHANGE_ON_NFS=NO
112_PATH=@SAPDIR@/@SAPSYSTEMNAME@
112_PERMISSION=0751
112_TRAVERSE=SUBDIRECTORIES
112_USERGROUP=sapsys
112_USERNAME=@LOWER_SAPSYSTEMNAME@adm
113_CHANGE_ON_NFS=NO
113_PATH=@SAPDIR@/@SAPSYSTEMNAME@
113_PERMISSION=0751
113_TRAVERSE=FILES
113_USERGROUP=sapsys
113_USERNAME=@LOWER_SAPSYSTEMNAME@adm
114_CHANGE_ON_NFS=NO
114_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
114_PERMISSION=0755
114_TRAVERSE=SUBDIRECTORIES
114_USERGROUP=sapsys
114_USERNAME=@LOWER_SAPSYSTEMNAME@adm
115_CHANGE_ON_NFS=NO
115_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
115_PERMISSION=0755
115_TRAVERSE=FILES
115_USERGROUP=sapsys
115_USERNAME=@LOWER_SAPSYSTEMNAME@adm
116_CHANGE_ON_NFS=NO
116_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
116_PERMISSION=0755
116_TRAVERSE=SUBDIRECTORIES
116_USERGROUP=sapsys
116_USERNAME=@LOWER_SAPSYSTEMNAME@adm
117_CHANGE_ON_NFS=NO
117_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
117_PERMISSION=0755
117_TRAVERSE=FILES
117_USERGROUP=sapsys
117_USERNAME=@LOWER_SAPSYSTEMNAME@adm
118_CHANGE_ON_NFS=NO
118_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
118_PERMISSION=0775
118_USERGROUP=sapsys
118_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0700
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3LINKS_IND_IND]
101_LINKCONTENT=@SAPMOUNTEXE@
101_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/dbg
102_LINKCONTENT=dbg
102_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/run
103_LINKCONTENT=@SAPMOUNTGLOBAL@
103_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/global
104_LINKCONTENT=@SAPMOUNTPROFILE@
104_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/profile
[Z_SAPDATAPATH]
S1=/db2/@SAPSYSTEMNAME@/sapdata1
S2=/db2/@SAPSYSTEMNAME@/sapdata2
S3=/db2/@SAPSYSTEMNAME@/sapdata3
S4=/db2/@SAPSYSTEMNAME@/sapdata4
S5=/db2/@SAPSYSTEMNAME@/sapdata5
S6=/db2/@SAPSYSTEMNAME@/sapdata6
SAPDATAT=/db2/@SAPSYSTEMNAME@/sapdatat
As you can see there is not an error message, the installation simply stops when the try to check the space available for tablespaces.
Regards

Check in MIGO for the excise tab

Similar Messages

Maybe you are looking for