Check Information Update

Dear All,
I am facing problem in F-58 and FBZ5 for Check printing, while doing this in printout system is not updating the check information i have done the necessary configuration for this but still system is not updating the check information.
Thanks and Regards
   Kapex.

Hi Kapex,
When you enter into F-58 screen there 1st you need to select the below fields.
Company Code, Payment Method, House Bank, Check Lot Number.
Printer for Forms.
Print Immediately, Do not avoid any Checks.
Then select ENTER PAYMENTS. now try to post the payment entry.
Rams.N
If this is helpful then assign me points instead of saying thanks

Similar Messages

  • Firefox: check for updates to addons at startup, inform user, but don't download and install, as before new addon-manager - how?

    Before the new add-ons manager it was possible to let Firefox check for updates to extensions at startup, and get information about available updates without having them automatically downloaded and installed. It seems that this is not possible any more - either updates are automatically installed without chance to review, or one has to open the add-ons manager to see the result of the update check. How can I get the old behaviour back?

    Mac Books have their own repair routines. I would suggest going to the Macbook usage forum and post there. Perhaps someone there can help. I would suggest a DiskRepair.
    Cheers!
    DALE

  • Payment document updated after payment run but no check information

    Now Folks help out with this one.
    We have the Payment Run completed and one vendor is missing a check. we look into the account and see that we have a payment document to this account so posting key 25 Vendor, and 50 Bank. but no check information.
    I can go in and reverse this document and manually input a check but in my next payment run another 4 vendors have no check info,
    so i cannot even cancel or reprint becos i have no check number I can only reverse
    HELP!!!!!!

    hi,
    u have to check if for the line item if payment is done or not if the payment is done u have to write the manual check and assign the check numbre to the payment line item for this u can used FCH4 or FCH4.
    hope this is clear. assign.
    With regards
    Krishna.

  • When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  Any suggestions?

    When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info???  Any suggestions?

    To reset, press and hold the Home and power buttons until the silver apple appears.
    I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
    Best of luck.

  • Why does "Check for Updates..." show that there are no updates available while I'm using Firefox 3.6.18 and latest version is 5.0.1?

    First and foremost, I'd like to clarify that I hardly have any technical knowledge. So pardon me if this comes across as a silly question to the professionals. Here are the details pertaining to this problem as per the best of my limited knowledge:
    I'm currently using Mozilla Firefox 3.6.18; previously it was 3.6.13. It was updated to 3.6.13 from 3.6.9 after I clicked on Check for Updates... and it told me that it'd be done when I reboot my system. When I restarted my PC, I was surprised to find that it was downloading the version 3.6.18. I didn't know how much it'd progressed in the process, so I let it finish it. After that, I disabled the option that enables it to download and update on its own, and turned it off. Next time when I started it, it was 3.6.18, but wasn't updating on its own anymore.
    Now I wanna update it directly to the latest version 5.0.1. But when I leave it to "'''Automatically download and install the update'''" option under Tools>Options>Advanced>Update, it downloads and updates the versions as per their release order. So if I leave it to it, then when I start it next time, it'll start downloading the version next to 3.6.18 and update to it instead of updating directly to 5.0.1. It'll keep doing so until it reaches there. For reasons of my own, I don't like that. So I '''unchecked '''the "Automatically download and install the update" option and chose the "'''Ask me what I want to do'''" option (so that it doesn't keep repeating the "downloading and updating" process on its own every time I start my PC). Then I went to Firefox site and thought of downloading and updating to the latest version on my own. But then I was informed that if I do so, '''I'll get the latest version, but I'll lose all my saved bookmarks unless I follow some hectic procedure to save them and load them again after installing the latest version of Firefox'''. I don't want to let that happen either. So, can anyone suggest me a way out of this situation without losing my bookmarks?
    Almost forgot. I tried several times by going to '''Help>Check For Updates...''', but every time it returned the same result: "There are no updates available. Firefox will check periodically for updates." How come no update is available while the version I'm using is 3.6.18 and the latest version is 5.0.1? In short, '''Check for Updates...''' didn't help either. (Even when I updated it last time, shouldn't it have updated itself from version 3.6.13 to 5.0.1 directly?)
    So, can anyone suggest a way by which I won't lose my bookmarks and would be able to update to the latest version directly too? An answer that wouldn't involve removing the current version and installing the latest one, but directly update to it (it's okay if it needs downloading) would be more welcome. I know that the bookmarks can be saved in a file and all, but I'd like to know if it's possible as it happened for my current version from previous version. (It downloaded and updated itself on its own, disturbing nothing, not even logged me out of certain accounts where I stay logged in. The only problem there was that it wasn't updating directly to the latest version.)
    I hope the aforementioned details make sense and are helpful enough for others to help me. Thanks.

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • My Firefox 3.6.20 does not display Firefox 6.0 when "Check For Updates", instead it shows that No Updates Available. Why is that?

    I just today updated to Firefox 3.6.20 from Firefox 3.6.18. I tried checking for new updates again using the Check for Updates option under Help and it said that "There are no updates available. Firefox will check periodically for updates." I am looking for Firefox 6 update, but it does not find it. This happened before when I tried to search for Firefox 5 when I had Firefox 3.6.18 and before Firefox 6 came out. Why does it not detect the latest version of Firefox when there is clearly a newer version out there?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • FireFox 3.6.8 & ThunderBird 3.1.2 check for updates never connects, nor does plug-in update or get plug-ins

    FireFox 3.6.8 & ThunderBird 3.1.2 check for updates never connects, nor does plug-in update or get plug-ins
    I am doing several re-installs.
    I installed FireFox 3.6.8 and ThunderBird 3.1.2 on a fresh install of Windows XP Home SP3 x32.
    All Windows updates and IE8, etc were done first after the WinXP install.
    IE8 works fine.
    Firefox can connect to the internet to view webpages, but NOT do a check for a newer version.
    (by going, on the main menu at the top, to Help --> Check for updates...)
    Neither can Tbird.
    See screenshots below.
    Neither Tbird nor Firefox will complete the add-ons check nor updates nor 'Browse All Add-ons' feature.
    (by going, on the main menu at the top, to Tools --> Add-ons --> Get Add-ons {upper left} or Find Updates {lower right for any of the selections})
    Another computer, same 'build' (different hardware, but WinXP SP3, etc) using a connection from the same router going out to the internet works fine, so it is not an overall connection problem outside of the individually affected computer.
    There is not yet any anti-virus nor firewall, etc installed that could be blocking things, except for Windows built in firewall, and there is no blocking action showing. Disabling it did not solve the issue.
    6 hours of searching has not found an answer. Trying some of the search results just to see has not proven to be successful.
    Thanks.

    dianej,
    Try this, go to tools, add-ons, extensions. if you have more than one (the latest) Java consoles, uninstall them. You only need the latest console and it should match the Java Platform in Plugins.
    I had a VERY similar problem displaying weatherunderground. It would not display the pages correctly and I would get pages of errors that stated
    "window.addEvent is not a function" I spent the last two hours fixing this problem. All I did was remove the 6.0.18, 6.0.19, 6.0.20 Java consoles from my 3.6.8 Firefox. After a FF restart, no more errors.
    There should be more information in FF when you update Java. No one tells you that you should go in and delete the older consoles.
    Good luck
    Mick

  • How do I allow offline use AND check for updates if online?

    I am actually not sure if this is a bug or not, as the behavior changed when I updated from 1.6u20 to u21. I have an application in a single JAR, and a JNLP file. I am testing with Windows 7 64-bit (with both the 32- and 64-bit version of the JVM installed, 1.6u20-b06 on both). The application cache is enabled. Here is my JNLP file:
    <?xml version="1.0" encoding="us-ascii"?>
    <jnlp
      spec="6.0+"
      codebase="http://hidden"
      href="Librarian.jnlp">
      <information>
        <title>Librarian</title>
        <vendor>Vendor</vendor>
        <homepage href="http://hidden"/>
        <description>Description.</description>
        <offline-allowed/>
        <shortcut online="false">
          <desktop/>
          <menu submenu="Vendor"/>
        </shortcut>
        <icon href="Librarian.gif"/>
      </information>
      <security>
        <all-permissions/>
      </security>
      <resources>
        <j2se version="1.6+"/>
        <jar href="Librarian.jar" main="true"/>
      </resources>
      <application-desc main-class="com.vendor.apps.librarian.Librarian"/>
    </jnlp>I am observing the following behavior wrt updates and allow-offline:
    When allow-offline is present:
    - JWS does not download updates to the JAR file when the desktop link is clicked.
    - The application can run when I disable the network connection.
    - The "-offline" switch is passed to javaw in the desktop shortcut.
    When allow-offline is not present:
    - JWS does download JAR updates when the desktop link is clicked.
    - The application can not run when I disable the network connection (HostNotFoundException).
    - The "-offline" switch is not passed to javaw in the desktop shortcut.
    What I want to happen is for JWS to check for updates if it can, and if it times out, instead of barfing, just go ahead and run the cached version. What I can get right now is either no updates + offline allowed, or updates + offline disallowed. However, I can obtain the behavior I want if I specify allow-offline then hand-edit the desktop shortcut and remove "-offline":
    When allow-offline is present but I remove "-offline" from the desktop shortcut:
    - JWS does download updates to the JAR file.
    - The application can run when I disable the network connection, after a short timeout.
    Now, I was under the impression that this behavior is the intended behavior of allow-offline: attempt to download update, on error, silently start the cached version instead. This does not seem to be the case. I actually wonder if this is a bug, as with 1.6u20, it seemed to download JAR updates just fine when allow-offline was specified (I had issues when the cache was disabled with 1.6u20, and so I moved to u21).
    How can I make this work the way I want without having to hand edit the desktop shortcut?
    Is this a bug, or am I misconfiguring (OED says this is a real word!) the application?
    Is there something else I have to do to indicate that the JAR is updated besides just uploading a new version to the server?
    It should be noted that I am not doing any web page magic here, I'm testing by simply downloading the JNLP file off the server and opening it. This is actually my first JWS experience and I haven't gotten to properly embedding it in a web page yet. I do not know if this is significant or not.
    Thanks!
    M

    Well, I solved that quick. I've been staring at it for over an hour but it popped out at me as soon as I looked at my JNLP file in my post here (guess it's the red text, heh).
    All I need to do is set online="true" in the shortcut, and also specify allow-offline, and all works exactly as I want it to. :-)
    Perhaps it was a bug in u20 that was causing it to check for updates anyways even with an offline shortcut... I'm not sure, and I don't have it in me to test it any more at the moment.
    Thanks,
    M

  • Windows update could not check for updates because the service is not running. You may need to restart your computer.

    I restarted my computer but still have this issue.
    I changed the setting from "install updates automatically"  to "never check for updates". clicked ok and then changed back to "install updates automatically". Tried to check for updates and still receive the same error.
    Windows defender was turned off. I turned it on updated it but still receive the same error message.
    The background intelligent transfer service and windows update are set to "automatic delayed start" and the status for both is "started".
    I'm running windows 7 home premium 64 bit
    I ran the MGADIAG tool and here is the report (windows tab)
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: 0x0
    Windows Product Key: *****-*****-QCPVQ-KHRB8-RMV82
    Windows Product Key Hash: +Rj3N34NLM2JqoBO/OzgzTZXgbY=
    Windows Product ID: 00359-OEM-8992687-00095
    Windows Product ID Type: 2
    Windows License Type: OEM SLP
    Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {22D605EF-8B21-4E2C-A111-AC15534A1805}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Home Premium
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_gdr.130318-1533
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 100 Genuine
    Microsoft Office Enterprise 2007 - 100 Genuine
    Microsoft Office Project Professional 2007 - 100 Genuine
    Microsoft Office Visio Professional 2007 - 100 Genuine
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{22D605EF-8B21-4E2C-A111-AC15534A1805}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-RMV82</PKey><PID>00359-OEM-8992687-00095</PID><PIDType>2</PIDType><SID>S-1-5-21-3546321622-335202686-625851561</SID><SYSTEM><Manufacturer>Dell
    Inc.</Manufacturer><Model>Inspiron 1545                   </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A14</Version><SMBIOSVersion
    major="2" minor="4"/><Date>20091207000000.000000+000</Date></BIOS><HWID>A27B3407018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard
    Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL  </OEMID><OEMTableID>WN09  
    </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
    Office Enterprise 2007</Name><Ver>12</Ver><Val>64BC76978749586</Val><Hash>GW6PzcEVEDTVKeO5Ym5UUm41dBk=</Hash><Pid>89388-707-0441865-65517</Pid><PidType>14</PidType></Product><Product
    GUID="{90120000-003B-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Project Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89403-707-4159871-63552</Pid><PidType>14</PidType></Product><Product
    GUID="{90120000-0051-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Visio Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89405-707-4159871-63071</Pid><PidType>14</PidType></Product></Products><Applications><App
    Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
    Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="3A" Version="12" Result="100"/><App
    Id="44" Version="12" Result="100"/><App Id="53" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12"
    Result="100"/></Applications></Office></Software></GenuineResults>  
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, HomePremium edition
    Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
    Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3562012
    Installation ID: 013283726900825816725312972325821572457642476266069113
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: RMV82
    License Status: Licensed
    Remaining Windows rearm count: 4
    Trusted time: 2/27/2014 11:12:34 AM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0x00000000
    HealthStatus: 0x0000000000000000
    Event Time Stamp: 12:25:2013 15:59
    ActiveX: Registered, Version: 7.1.7600.16395
    Admin Service: Registered, Version: 7.1.7600.16395
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: LgAAAAEAAQABAAIAAAABAAAAAgABAAEA6GFwuHZK2jMchnYOKB9UbZombj1Gyg==
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes
    Windows marker version: 0x20001
    OEMID and OEMTableID Consistent: yes
    BIOS Information:
      ACPI Table Name    OEMID Value    OEMTableID Value
      APIC            DELL          WN09   
      FACP            DELL          WN09   
      HPET            DELL          WN09   
      MCFG            DELL          WN09   
      SLIC            DELL          WN09   
      SSDT            PmRef        CpuPm
    I also ran the following commands in an elevated command prompt
    NET START BITS
    NET START WUAUSERV
    SC QUERYEX BITS
    SC QUERYEX WUAUSERV
    Here is the result
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>NET START BITS
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Windows\system32>NET START WUAUSERV
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Windows\system32>SC QUERYEX BITS
    SERVICE_NAME: BITS
            TYPE               : 20  WIN32_SHARE_PROCESS
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
            PID                : 400
            FLAGS              :
    C:\Windows\system32>
    C:\Windows\system32>SC QUERYEX WUAUSERV
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>NET START BITS
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Windows\system32>NET START WUAUSERV
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Windows\system32>SC QUERYEX BITS
    SERVICE_NAME: BITS
            TYPE               : 20  WIN32_SHARE_PROCESS
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
            PID                : 400
            FLAGS              :
    C:\Windows\system32>
    C:\Windows\system32>SC QUERYEX WUAUSERV
    SERVICE_NAME: WUAUSERV
            TYPE               : 20  WIN32_SHARE_PROCESS
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, ACCEPTS_PRESHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
            PID                : 400
            FLAGS              :
    C:\Windows\system32>
    I can't remember the last time updater worked correctly but it's been a really long time.
    Thanks for any help you can provide

    Hi,
    Please try this
    Stop Windows Update Service and BIT Service now.
    Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
    Start Windows Update and BIT service now.
    Then try to download windows update now.
    If doesn't work, please reset the windows update componments 
    http://support.microsoft.com/kb/971058/en-us
    Yolanda Zhu
    TechNet Community Support

  • When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

    When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
    The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
    Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
    MacBook Air (mid 2012), OS 10.10,  HP Officejet 7500a

    This is what appeared on Console:
    11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
    timestamp: 12:42:32.557 Wednesday 12 November 2014
    process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
    code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
    #exceptions
    11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
    11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
    11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
    11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
    11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
    11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    Not sure what any of this means.

  • POI Information Updates when Costing Changes are not Saved

    Hi All,
    When you go to the costing screen of a party in Oracle HRMS, make changes to the costing string (Cost Allocation Flexfield) and not save them. Then, exit from the costing form and go to the Purchase Order Information (POI) screen and press Ctrl+F11, the POI information updates to the new changes. It was my understanding that in order for the purchase order info to be updated you need to make changes or "touch" the costing screen and save. I have noticed that the purchase order changes after being in the costing screen even without saving anything. Was this intend?
    Thanks,
    Naveen Gagadam

    The Changes on the Assignment reflect because of the changes on the Costing Screen. This is due to the custom.pll implementation. Is there an event name that I can use for the Assignment form such that the changes on the Assignment screen show up only after the changes are SAVED on the Costing Screen. Here's the code that we are using in the Procedure: Event of the custom.pll
    ====================================================================================
    If Event_name = 'WHEN-VALIDATE-RECORD' then
    --     1. Costing checks at Assignment (PERWSEAC). This code copies first 4 segments of costing string
    --               to Default Expense Account on the Assignment screen.The Code will perform this function for
    -- the first Costing record but no other record.
    if name_in('system.current_form') in ('PERWSEAC') then
         Step_identity := 'Costing to Expense Account Population';
                   if name_in ('system.cursor_block') = 'COST' then
    -- Check if current record is the first record in the block
    -- prior to 4/6/05 this code only ran if first costing record. now runs for all and passes
    -- whether first record to package. B Wagner                    
    if name_in('system.cursor_record') = '1' then
              lvc2_first_rec := 'Y';
    else
         lvc2_first_rec := 'N';
    end if;
                        if name_in('COST.SEGMENT1') is not null
                   and name_in('COST.SEGMENT8') is not null
                   and name_in('COST.SEGMENT2') is not null
                   and name_in('COST.SEGMENT3') is not null then
                             lvc2_company_nm     := name_in('COST.SEGMENT1');
                             lvc2_LOB := name_in('COST.SEGMENT8');
                             lvc2_location := name_in('COST.SEGMENT2');
                             lvc2_dept := name_in('COST.SEGMENT3');
                             FND_PROFILE.get('USER_ID',ln_user_id );
         -- It has been assumed that the seperator for the flexfield segments is a period ('.') .
         -- If the seperator is changed then the following line of code has to be modified.
         -- If the number of segments in the flexfield definition is changed then the number of
         -- separators has also to be modified.
    ln_assignment_id := name_in('COST.ASSIGNMENT_ID');
    ld_session_dt := name_in('CTL_GLOBALS.SESSION_DATE');
    smc_customlib.set_exp_act(
                                                                     ln_retcode,
                                                                     lvc2_errbuf,
                                                                     ln_user_id,
                                                                     ln_assignment_id,
                                                                     ld_session_dt,
                                                                     lvc2_company_nm,
                                                                     lvc2_LOB,
                                                                     lvc2_location,
                                                                     lvc2_dept,
                                                                lvc2_first_rec
    if ln_retcode = -1 then
         -- b wagner 4/6/05 - raise trigger failure so bad combinations can't be entered into costing screen
         fnd_message.set_string(lvc2_errbuf);
         fnd_message.error;
         raise form_trigger_failure;
    end if;
                        end if; -- If costing string is complete
                   end if;   If First Record of COST Block
                   end if; -- If Block is COST
         end if;     -- For Assignment form.
    ================================================================================================================
    Its the custom package that actually populates the changes in Costing Screen onto the Assignment Screen, but I want to activate this only when I save the changes on the Costing Screen. Right now the changes are seen on Assignment Screen when I hit CTRL=F11 even when I don's save the Costing Screen changes.
    Thank You,
    Ngagadam.
    Message was edited by:
    Naveen Gagadam
    Message was edited by:
    Naveen Gagadam
    Message was edited by:
    Naveen Gagadam
    Message was edited by:
    Naveen Gagadam

  • When I try to check for updates, an error message appears with no details. How do I get and check the updates on my new intex cloud fx phone?

    I have a new Intex Cloud Fx phone. In this, I go to 'Device in formation' and try to update the device by pressing update now, I get an error message that says 'an error occurred while checking for updates'. Also, it does not respond to the' last updated' command. When I press 'more device information' I can see’ OS version Intex_Cloud_FX_V07’. I have tried all kinds of procedures suggested on the net and elsewhere but have not succeeded in updating my phone, so far. This includes resetting the phone. I am using a Wi-fi connection. It seems that quite a few persons are facing this problem. There have been suggestions ranging from 'there is a bug' to 'there are no updates'. So, the problem persists, with no end in sight. I feel Mozilla should look at it.

    Hi!
    Thanks for contacting us today! I understand you are having issues with updating, and using the device.
    I believe that we are aware of the update issue however, it is ultimately the carrier/ manufacturer to provide updates. Please contact the respective company for assistance.
    As for device using, and things not working. Please provide us with more details. (Note: the bug may have already been fixed, but is available in a later update).
    Thanks!

  • When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

  • Check for updates not working in 9 pro

    I am running Acrobat 9 pro on a Vista machine. Acrobat appears to have been malfunctioning (bates numbering is not working properly), and I uninstalled (and deactivated) Acrobat, and then reinstalled it.
    After reinstallation, I used the check for updates feature in the help menu to update from 9.0 to 9.2. But now every time I run Check for updates from Help, nothing updates. I get a dialog that there is an available update, and then an icon System Tray appears and a process is active for AdobeARM.exe. But nothing ever happens-no update. I then force close the process from the task manager, and still no success in getting Acrobat to update.
    What can I do? Thanks very much.

    LeoAdobeX:
    Thank you for your rely. Here is the more detrailed info:
    1. I pulled down the Help menu and chose Check for Updates.
    2. A dialog appeared that said an update was available; I clicked on the button that indicated I wanted to download and install the update
    3. Nothing further appeared onscreengiving my information or choice, but an incon then appeared in the system tray for the installer.
    4. Hovering over the icon does not pop up any status information. If I click, double click, or right click on the incon in the system tray nothing pops up, and nothing appears. At that point I get absolutely no response.
    5. If I go to task manager at that point it shows the active process AdobeARM.exe and gives no indication of it malfunctioning. But nothing installs and nothing downloads and nothing happens.
    6. If I then pull down the Help menu and chose Check forUpdates again, I get a dialog that says the updater is already running.
    7. All of this occured immedaitely after I reinstalled 9 pro.
    I hope this additional info helps. Thanks very much.

  • I lost all of my information updating to iOS 6 on my IPhone 4. How do I get it back?

    I lost all of my information updating to iOS 6 on my IPhone 4. How do I get it back?

    As Lawrence Finch suggests you can recover more recent information if you have a more recent iCloud backup.
    To avoid this problem in the future you should check the iTunes settings when your phone is connected. Make sure iTunes is not set to sync automatically when your iPhone is connected. Another step to take is to give your new iPhone a unique name that is different from your old iPhone. Finally, the best way to charge an iPhone is to use the charger that came with the iPhone and plug that into a good wall outlet.

Maybe you are looking for

  • Macbook pro 13" CPU A Diode temperature

    Hi all, I have recentlypurchased MBP13 inches (Intel Core i5 2.4 ghz, 500 G HDD, Internationalkb). I observed a difference in CPU heating behaviour compared to mypreviously used MBP 15" (2008 version). So I did the following test: 1. CPU Temperature

  • Passing parameters to RFC enabled FM

    Hi, I have following data defined.. DATA: BEGIN OF *aaa OCCURS 0,           END OF *aaa. I want to call an RFC enabled FM in another system and pass this data. Also I want to receive lots of such internal table data (*bbb, *ccc, *ddd )in return from

  • Account type D

    Hi, Please through your views on the below error. Whie Parking MM invoice in MIR4, i got an error Account D is not defined for Document Type RE All Purchase Orders are Account Assigned to Sale Order. Regards Pratap

  • ORA-07445: exception encountered: core dump [ldxsti+0208] [SIGSEGV] [Addres

    Hi, I am continuously getting this error in alert in my Production database. Please suggest on how to get rid of this.

  • Help.. I i time machined my address book and it was the older version..

    And now I have no address book.. Apple doesn't have it available to download and i replaced the newer version with the older one.. (stupid stupid stupid) what can I do. ?