Check-out button is not disable after the check out request from the same user

HI all,
I want to use check out/ in procedure in solution manager along with email notification. For that, I have maintained required settings and maintenance project for the intended solution. I want to implement a team leader- manger hiearchy for any changes to the solution. When a team member requests for the check out for any process scenario/ step, the status goes to check out requested. But, the problem is, check-out button is not disable and same user can do the check out which I want to restrict. The check out can be done only by the project manger. I guess, this is related to authorization roles for both team member and manger. But I am not able to find out. Please help me to have the authorization roles for this.
Thanks,
Rutvik Upadhyay.

Why not putting a af:fileDownloadActionListener inside the command button. In the bean you need an method like
public void exportExcel(FacesContext aFacesContext, OutputStream aOutputStream)
} You can use the output stream and when you finished just flush it. Don't close the stream and don't complete the response.
Timo

Similar Messages

Itunes does not sync after upgrade to iPhone 5s from 4s, same user id

I have upgraded from iPhone 4s to 5s, but my Windows 8 laptop itunes keeps trying to sync with old iphone 4s (which I do not use anymore) and my new iphone 5s does not sync at all with itunes in Windows 8 laptop. I am using same apple id for iPhone 5s that I used for iPhone 4s. Please help me so that I can sync my iPhone 5s with the existing itunes in Windows 8 laptop.

Apparently something is not being saved somewhere and this technique forces the save. Below is a C&P from another poster describing the technique on a different thread. It's been working for him for some fifteen hours. I tried it and it's been working but it's been only ten minutes. My gut feel is that quitting and relaunching iTunes are critical steps.
With the device connected via cable, click on its icon
Uncheck WiFi syncing
Click Apply
Quit iTunes
Launch iTunes
Check WiFi syncing
Click Apply

How do i get the refresh button to not disappear after i have moved it to the left side of the address bar in firefox 8?

when i customize the toolbar i moved the refresh button to the left side of the address bar, i also put the stop button and home button there as well. but after i click done when i have finished only the refresh bar disappears, but i can click customize and it reshows up in the same spot only to disappear again after i click done. it used to work just fine in firefox 3.

I've attached a screenshot. You may have to move one of the buttons around a bit until it settles down. Alternatively you can also add a '''Separator''' ('''View''' (or '''Alt''' + '''V''') > '''Toolbars''' > '''Customize''') between the two.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

My home and power button is not responding after I deleted an app from my settings. Can anyone help?

I went to update my iPhone 4 to the new iOS 7 but needed to create some space. After deleting a couple of apps, my home and power buttons now aren't responding.
Has this happened to anyone else before? I've read that a back up and restore might help.
Any advice would be greatly appreciated.
Thanks, Claire

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

Creation of Credit Memo request from the contract invoice

Hi all,
I would like to know the relationship between the contract invoice (billing document type, ZULG) and the associated credit memo requests. I have the billing document no, and need to know all the associated credit memo requests.
It is possible to find the reference billing document from the credit memo request, as it is created with respect to a billing document, but is it possible to find the credit memo requests from the billing document?
Any info on this relationship would be really appreciated.
Many thanks,
Sruthy

Hi!
If the credit memo is created as a follow on order with respect to the contract, it is possibel to find the credit memo request through the doc flow.
Thanks & Regards
Birlabose

After i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it

after i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it to play the next song. Or put it in the UP NEXT.

First, make sure these items have checkmarks next to their names in iTunes. Continuous playback only works on checked items. Itunes will play all checked items in a list whether or not they're from the same album.
If you see that nothing in your library is checked and you want to check everything, hold down Ctrl while checking an item. This checks everything.
Next, fixing the "1 of 1" problem is easily. Select all the tracks that make up the book/album. Let's say there are 15. Press Ctrl-I. Doublecheck that the album box is filled in with the name of the book, and if not, type it there. Enter "15" in the box for the total number of tracks. Click OK. Now all the items should be "1 of 15," "2 of 15," and so on.

Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

Greetings Kwnez
I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
What I'm saying is "Are we on the same Page"

After trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me out

I WANT TO PURCHASE NFS MOST WANTED GAME FROM APP STORE BUT IT DOESN'T ALLOW ME TO PROCEED FURTHER
after trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me out

In most cases, you can't use a Debit card anymore. So, either redeem an iTunes gift card or use a credit card.

An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help.

I can not take out the DVD RW disc from the drive PIONEER DVD-RW DVRTS09

I have a iMac 2010.
I can not take out the DVD RW disc from the drive PIONEER DVD-RWDVRTS09
Disk inside the computer. But there is no information about it on the desktop and server tools "Disk Utility"
What should I do?
Restart Computer literacy is already done
   Firmware revision: Q90B
   Connection: ATAPI
   Supports recording: Yes (drive supplied Apple)
   Cache: 2000 KB

Restart computer while holding down continuously on the left click button of the mouse. Continue to hold until the disk is ejected.

My iPhone4 does not start after it was out of charge and recharged again?

My iPhone 4 does not start after it was out of charge and recharged again?

Hi Svedjot,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy

JSP Check. JSP is not responding after installation

While installing e-buz I got an error for JSP Check.
JSP is not responding after installation
After that I just stucked.
What might be the error. All system requirements were satisfied. MKS(I used cygwin, then MSVC, gnumake) Everything went fine till 100% installation.
I am using following config
System OS- windows 2k prof.
P4 2.8Gz
Ram- 1GB
HDD 120 GB
Thanks,
Any help will be appricated
--Arvind Ashtekar

Check the Apache and Jserv log files You might need to bounce Apache puttinh log=true in jserv.properties file and try to fix error message you get Jserv OR apache log file.
Regards,
Kanhaiya

TS2446 Apple ID still disable after resetting password. What is the fix?

Apple ID still disable after resetting password. What is the fix?

Welcome to the Apple community.
If you have tried Apple's recommendation to reset your password, and it has not succeeded, then I suggest you contact Apple using the Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
You might try a 3.5mm to RCA adapter
from the Mac Mini's headphone jack to the TV's audio input,
but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours and

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.

Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen

Check-out button is not disable after the check out request from the same user

Similar Messages

Maybe you are looking for