Check printing in English along with Arabic language

Hi,
My requirement is to print check in English along with Arabic language.
All details in English, except vendor name, which should be in Arabic.
I am maintaining two forms one in English and 2nd in Arabic language.
2nd form which is in arabic is meant for Vendor name in arabic.
My print program flow in brief is as follows:
OPEN_FORM.
In between, after writing all the English details, i am ending the English form and then starting Arabic form and printing vendor name and ending the Arabic form.
CLOSE_FORM.
In stead of single page I am getting 2 pages as output.
Page1: English details, without Arabic name.
Page2:Vendor name alone in Arabic.
Can you please tell me how to print vendor name also on the 1st page itself along with other details in english.
Thanks & Regards
Seshagiri

Hi,
Have you got the solution to your problem? what you did?
Actually I am now have the same problem. I have to print the korean text (Customer Address which is in korean in master table). in debugging mode it is coming correct. while printing it is prnting as #. Currently i am maintaining only one form in english.
Have you maintained two forms or how you did to display the arebic?
Its urgent please reply.....
Thanx In advance

Similar Messages

Error while using Function module SPELL_AMOUNT with arabic language AR

Hi ,
When i am trying to convert the number to words, using function module SPELL_AMOUNT with arabic language(AR),following abend message is coming and FM is getting abended.
Entry AR 0 1 in table T015Z does not have a delimiter (
Can you please provide me how to overcome this error?
Thanks & Regards
Seshagiri.

Hi Santosh,
Thanks for quick inputs.
And amount is not having any delimitors.
I have checked in table T015Z and it has entries with AR as SPRAS.
All entries are having ':' at the beginning of the arabic words,and there is no single entry with ';'.
All entries with EN as SPRAS are having delimiters ';' at the end of the words.
Numbers are correctly converted to words in english,but abending in arabic.
Any idea please.
Thanks & Regards
Seshagiri.

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page, or possibly in some sort of booklet format. Thank you very much.

You can make a Book and have a photo on one side and your text description on the other.

What is the best office program for mac dealing with arabic language?

what is the best office program for mac dealing with arabic language?

The best word processor is Mellel. TextEdit, Nisus Writer, and Open/Libre/NeoOffice should also work OK.
MS Word for Mac does not do Arabic, but I am not sure about Excel and PowerPoint. If not, OpenOffice would be the only option.
iWork has bugs that probably make it unsuitable for RTL for most people.

Update N73 with Arabic Language

Hi all,
This is the first time for me on this Nokia discussion board.
My asking about how to update my phone N73 languages with Arabic language which is not included into the original setting for the phone software, in other words how to add the Arabic language to N73 phone?
Need a quick reply
Thanks in advance
Tamer

Normally, phones are provided with languages for the country or region where it was intended to be sold, but sometimes the retail trade moves phones about before they are sold to the public, so it is possible that you have a phone that was not intended for an Arabic country.
A Nokia service point may be able to add the arabic language pack.

Data Merge not compatible with Arabic language?

I am using Data Merge in InDesign CS6 (Middle Eastern version) with Arabic language content. The resulting text is all gibberish (mostly rectangles). Can someone help, please?

Im having the same problem, My arabic text is displaying in the unicode text file. My paragraph is set to world ready, but it still displays jibberish. Any idea?
EDIT: I think I solved it. Had to combine your solution with useing notepad++ to convert internal file encoding to UTF-8 WITHOUT BOM
http://forums.adobe.com/message/6261281#6261281

How to get Check printing in English or Arabic language

Hi
My client is in Saudi Arabia. We are in realization phase. Client requirement is Check printing should come either in English or in Arabic. As per their requirement they will take the print out. So, how can we maintain that and what is the procedure for that.
Earliest replies will be appreciated.
Regards
Chinnu

Chinnu,
The language is usually determined by the user ID.
What decides if the language is Engish or Arabic?
PeteA

Text Printing mismatch with Arabic Language

Hi gurus,
I have a requirement in printing the dunning form in different language based on the customer. Currently based on the language condition i m calling the text element with right alignment. But i m observing a strange problem with the arabic language that my sentance is getting mismatched. e.g. text "Enclosed please find our statement' it is printing "please find Enclosed our statement".
I am using a standard text includ for displaying the text.
Please respond with solution. <removed by moderator>.
Edited by: Thomas Zloch on Feb 25, 2011 5:29 PM - priority reduced

Hi, you do not need to do any thing to handle the RTL text. SAP itself handles the situation. but you need to be carefull while using mixed language like english and Arabic together in same form. there are some upgrade patched required to be applied to solve the problem else your text will be printed in mismatch format.

Printing Pro*C Outputs with Other Language Text and PCL

Hi,
Since I did not find any separate forum for Pro*C, I am posting my query in this forum.
In our application, using Pro*C programs we are generating reports. These reports contain other language characters such as Arabic, Thai along with printer control characters (PCL). Earlier for the reports that contains only English characters, we have used C program to print the document and now we could not use the same C program because of the presence of other language characters in the output (when the old C program is used for printing, the other language characters are printed as junk).
Can anyone update me about the options that are available in C or VB or any other third party printing program to print the documents generated in other language as well as with printer control characters.
Thanks in advance.
Best Regards,
Ganesan

Hey Thanks .
Does that mean I will put 1900 as character set in that device type and assign it to printer and then print with that ?
Best
Ganesh

How to Print Selection-Screen along with ALV Report output

Hi,
I have a requirement wherein i need to also print the Selection Screen of a report when I print the ALV report output.
Basically i need to print the ALV output along with selection screen.
Could you plz suggest me the way.
Regards,
Nitin

Hi,
My selection Screen is a very big one. It contains around 30 select-options.
So is their any standard method in which you can choose whether you want to take the output printout with or without Selection screen.
Regards,
Nitin

Firmware with Arabic language

Hi
I just bought Sony z1 from UK
but The problem is No Arabic Language
plz if u have firmware with Arabic lang Can u add here TFT
thanks

Here you go
http://forum.xda-developers.com/forumdisplay.php?f=2508
Don't forget to give Kudos
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Creating TOC in CP4 with Arabic language contents

Hello all,
i'm preparing my captivate project4 using Arabic language.
The TOC entries with Arabic words are switched left to right instead of right to left during project preview.
what to do? your help please

Emma_Baillie wrote:
I have a bunch of files with names in Japanese characters (also Chinese, Korean, Spanish etc, but this will do for an example). The encoding is Unicode.
I wish to be able to put them in a zip file, then extract them again using any old zip tool (WinZip,PKZip,7-Zip etc)
Trouble is, every time I do it, the files inside the zipfile end up with garbage character names. The contents of the files are fine, though.This is becuase zip tool doesn't support unicode for zip entries. For example WinZip prior to 11.2 does not support Unicode characters in filenames. You need to look for the simillar information for other tools. You can find more on tools on their website.

Check printing issue when vendor in Arabic and other in english are used

We are facing a scenario in which when we try to print two checks (one in arabic and the other in english) , the amount in words for english is creating alignment issue . Like 54647.08 in words would be fifty four thousand six hundred fourty seven and eight / hundred of the currency . But it is getting displayed as 'and eight / hundred of the currency fifty four thousand six hundred fourty seven .This issue is coming only when the english check comes after arabic one and not vice-versa and also when the amount in words is bigger (not in case of amounts like 70000 )

Hi
Try to use CALL FUNCTION 'SPELL_AMOUNT' Currecny Key = "USD" irrespective of the currency and then based on the country key or langauge Concatenate the Currency to the SPELL AMOUNT..
surya

Problem with arabic language in report 10g

hello all, sorry i can't speak english very well
im using oracle database 10g and forms,report 10 g
windows xp sp3 operating system
i call my report from my form its working very good
but report language appear is symbol something like this pic my language is arabic
[http://imageshack.us/photo/my-images/6/reporterror.jpg/]
please help me and thank's

rzuluaga wrote:
Hi,
- What is the NLS_LANG value you are using for your reports environment?
- How is the output if you use desformat=html?
- What font are you using in this report?
- When you run the reports in Reports Builder how does it look?
- There is a good support note regarding Font issues that is worth it to review
Reference
Master Note for Font Issues in Oracle Reports (Doc ID 1297012.1)
Regards
What is the NLS_LANG value you are using for your reports environment?
ARABIC_EGYPT.AR8MSWIN1256
How is the output if you use desformat=html?
[http://imageshack.us/photo/my-images/221/report1h.jpg/]
arabic is good is html but design not good
What font are you using in this report?
Arabic Transparent -i sure this font is good for arabic-
When you run the reports in Reports Builder how does it look?
[http://imageshack.us/photo/my-images/191/report2vl.jpg/]

Problem in translation of english text into arabic language

Hello Everybody,
Application:
I had developed an applciation which needs to be run in both EN / AR languages.
In the applIcation I am using POPUP_TO_CONFIRM FM for confirmation before exiting from a screen.
I am using a TEXT-ELEMENT for the text of tht FM , I had translated the text in that text element into
Arabic successfully.
Query:
When i am looged in through arabic lang , if the screen direction is LTR (Left to right) then
the text in the pop up was displaying properly in arabic.
but if the screen direction is from RTL (Right to left) then the text in the pop up is coming in a special symbols like ... or weird symbols. I am not understanding why?
Could any body give suggestion regarding this .
Thanks,
Pavan.

Hi,
try using the fm SPELL_AMOUNT
with language key AR so that you wil get your desired output.
Regards,
Madhumahesh

Check printing in English along with Arabic language

Similar Messages

Maybe you are looking for