Check writer XML not working.

We are using the oracle provided Check writer XML program for HR Payroll check printing. Check writer XML program is getting error ed out when we attach MICR font set up to the Check writer XML Template in template definition, works fine if we remove the MICR font set up for the template. And MICR font set up is working fine for other custom programs we developed. Any suggestions?

Ya i gone through the docs in the thread. the program works fine when we remove the MICR font setup for the template.
configuration
==========
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.1
Error is
========================
HR_6859_HRPROC_OTHER_PROC_ERR
APP-PAY-06859: An error has been detected by another process.
Cause: During processing, the master or another slave process has detected an error, communicated by setting the Payroll status to 'Error'.
Action: Examine the error log file and payroll messages to investigate the cause of the error.

Similar Messages

Check Writer (xml) is not showing current accrual hours

Hi,
We are on EBS 11.5.10.2, we are going live with new accrual plan of category Vacation, when we run the check writer (Xml) process it does not show the current period accrual , it does show correct Net accrual hours. What do I need to do to get this working.
Thank you.
Edited by: 924406 on Jun 19, 2012 3:22 PM

Do you have the data field in the templae set right?
Attach the template here if you can after taking out any sensitive company information you might have on it.

MICR font not displayed in PDF on SUSE Linux Server for Check Writer (XML)

We are generating checks by running the Check Writer(XML) concurrent request and are not able to see MICR fonts on the Check. We downloaded the free version from IDAutomationSMICR.ttf and the fonts were registered under /usr/local/fonts/micr directory. I registered in APPS and uploaded the file IDAutomationSMICR.ttf. Am I missing any steps. The DBA's have registered the fonts under /usr/local/fonts/micr on SUSE Linux Server . The custom Checks are generated but no luck with the fonts. Please advise. Can I download MICR fonts other than IDAutomation site? Appreciate your response.
Thanks,
Hari

I use version 11i, so the steps are probably different. Download a font file (gnuMICR for me). Extract it to a location of your choice on your operating system.
Follow these steps to load the MICR font to the server. (Step 11 was missing in some of the metalink documents in late 2007. I think Jan. 2008 will be OK).
1.     Log in as XML Publisher Administrator.
2.     Navigate to Administration->Font Files->Create Font File.
3.     Fields are Font Name and File. For Font Name choose any descriptive name. File will browse your PC to locate the font file.
4.     Navigate to Font Mappings->Create Font Mapping Set.
5.     Mapping name is the name you will give to a set of fonts. [MICR Font]
6.     Mapping code is the internal name you will give to this set. [MICR]
7.     Type: 'PDF Form' for PDF templates. 'FO to PDF' for all other template types.
8.     Create Font Mapping (this allows you to add multiple fonts to a set).
9.     Font Family is the exact same name you see in Word under Fonts. If you don't use the same name the font will not be picked up at runtime. [GnuMICR]
10.     Style and weight must also match how you use the font in Windows. Normal and Normal are good defaults. [Normal, Normal]
11.     DO NOT enter Language or Territory
12.     Choose a value for Font Type. [Truetype]
13.     Search for the Font you just created in step 3. [GnuMICR]
14.     Navigate to Configuration -> FO Processing -> Font Mapping Set. Can also be done at data def and template level under Edit Configuration. Hierarchy is Site-> Data Def -> Template.
15.     Select your new mapping set.
16.     Make sure the font is not referenced under File->Properties->Custom in the RTF template file.
17.     Select a temporary directory on your concurrent processing node (Configuration -> General). This needs to be a private area not shared by other processes, read writeable by the applmgr (owner of the $APPL_TOP file system). It should be fairly large 5 GB or 20x larger than any datafile being used. The fonts will be downloaded here the first time they are used.
18.     Also at this site level select your font mapping set.
19.     Upload a template that uses your special font and test using preview.

Segments in Check Writer XML data source

Hi,
Can anyone tell me what are the Segments 1-10 in the XML data source that I see for Check Writer (XML) when I use "Third Party Checks". I tried populating few fields in the Entry values for the corresponding element but that didn't work.
We need an additional field to populate some reference number that needs to be printed on the check and we would like to use one of these segments since it eliminates the customization.
- <EMPLOYEE_THIRD_PARTY_PAYMENTS>
<ORG_PAYMENT_METHOD_ID>63</ORG_PAYMENT_METHOD_ID>
<PERSONAL_PAYMENT_METHOD_ID>103704</PERSONAL_PAYMENT_METHOD_ID>
<CHECK_DEPOSIT_NUMBER>166986</CHECK_DEPOSIT_NUMBER>
<SEGMENT1 />
<SEGMENT2 />
<SEGMENT3 />
<SEGMENT4 />
<SEGMENT5 />
<SEGMENT6 />
<SEGMENT7 />
<SEGMENT8 />
<SEGMENT9 />
<SEGMENT10 />
<PRE_PAYMENT_ID>4077062</PRE_PAYMENT_ID>
<VALUE>151</VALUE>
<PREPAYMENT_ASSIGNMENT_ACTION>1363042534</PREPAYMENT_ASSIGNMENT_ACTION>
<ORG_PAYMENT_METHOD_NAME>TP Bethesda</ORG_PAYMENT_METHOD_NAME>
</EMPLOYEE_THIRD_PARTY_PAYMENTS>

Ok..found it. Those are the bank details.

Data source for deposit advice xml and check writer xml

Could someone please tell me where I can find the data source for the Deposit Advice XML and Check Writer XML programs. Since these executables are now a spawned process (PYUGEN), I don't know how to get to the data source. I was able before to look at the queries in PAYUSPST.rdf and PAYUSCHK.rdf. Where are these queries located now? Any help is appreaciated.

Hi All,
I applyied the patch 6399100 and i got the seeded Check Writer (XML) and Deposit Advice (XML) programs.Im able to run the Check Writer (XML) with Parameter (Check Style :Seeded Archive Check Writer Template ) but where as the im unable to run the Deposit Advice (XML) due to Error msg: "No enties found for list of vales"for the 'Check Style' Parameter.
And for the above (only for Deposit Advice) i am not able to ecexute the SQL script given in the Doc ID : 459306.1 due to the error msg : cannot insert NULL into ("HR"."PAY_REPORT_CATEGORIES"."REPORT_GROUP_ID") if i see query the select * from apps.pay_report_categories where short_name like 'ARCHIVE%' there is no record exixts for ARCHIVE_DEPOSIT....
for this we required any other patch/setups.
And is the "Third Pary Check" will support XML Publisher ??
Any respose will be greatly appriciated.
Thanks,
Madhu
Message was edited by:
user589951

Check Writer (XML) - where to customize?

Hi everyone,
I have to add mailstop to the check writer (xml) process and it looks like it pulls the information from what is archived. Unfortunately, mailstop is in our system, but is not included in the archived data.
I feel as if I'm not the only person who has to add an additional field to their checks, so how have you done this?
At this point I am unable to even find the name of the package that pulls in the data to produce the XML output.
Can anyone out there let me know how their developers have added additional data to use in the check output?
Thank you in advance!
-CC

Hi,
Please see if this thread helps.
How Can We Change Number of Earnings on XML Checkwriter
How Can We Change Number of Earnings on XML Checkwriter
Regards,
Hussein

How to setup Check Writer (XML) for Canada?

I need to set up Check Writer (XML) for Canada. On MOS Note 459306.1 it appears that this is for US legislation. Has anyone successfully set this up for Canada, and if so, how?
Thanks...Paul

Please see (Cannot Find Documentation On Configuring Canada Check And Deposit Advice For XML [ID 557717.1]).
Thanks,
Hussein

How to generate postscript in Check Writer (XML).

I have set the format for Check writer (XML) in the system administrator responsibility to Postscript, still it generates PDF and XML, but not the postscript. Where am I going wrong? Do I need to enable or do additional setups? Appreciate your help.
Thanks,
Hari

Hello,
Just install a Postscript Printer Driver and use :
rwrun.exe report=.. destype=file desname=c:\temp\output.ps desformat=psprinter
if psprinter is the name of the postscript printer you have installed.
Regards

Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Compaq presario a933tu dvd writer is not working properly

compaq presario a933tu dvd writer is not working properly

Hi,
Please try this first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Sidecar.xml not working with smoothScrolling

Hi everybody!
I am struggling with a big problem with the sidecar.xml file because it does not load the <smoothScrolling>always</smooothScolling> instruction.
I have created a very simple "test" folio with only two articles each made of two pages either in horizontal and vertical, so I have the followinf structure:
<FOLIO> (main folder)
sidecar.xml
<001> (first stack)
001_v.indd (an indesign file with 1 page 768x1024)
001_h.indd (an indesign file with 1 page 1024x768)
<002> (second stack)
002_v.indd (an indesign file with 2 pages 768x1024)
002_h.indd (an indesign file with 2 pages 1024x768)
I have created the sidecar using the utility of Johannes Henseler so I am sure it is correct and here it is (I have just removed the link section which was very long):
<?xml version="1.0" encoding="UTF-8" standalone="true" ?>
<sidecar>
          
          
          <entry>
                    <folderName>001</folderName>
                    <articleTitle>Test</articleTitle>
                    <author>Puzzle</author>
                    <kicker>Pilly</kicker>
                    <description>Cover</description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
          
          <entry>
                    <folderName>002</folderName>
                    <articleTitle>Test</articleTitle>
                    <author>Puzzle</author>
                    <kicker>Pilly</kicker>
                    <description>First Article</description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>always</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
</sidecar>
Well.. what it happens now is that I create a new folio with the Folio Builder Panel and then I import using the multiple article option. Everything seems ok (the two articles are imported and the description, article title, author, kicker are correct) but the "smoothScrolling" results to be deactivated! (in my Italian version I have the following text "Scorrimento uniforme: disattivato (allinea a pagina)" (that I translate as "never") instead I was expecting to have "Scorrimento uniforme: entrambe le direzioni" (that I translate as "always").
And what is worse is that if I try to modify the property in Indesign using the Folio Builder Panel I get this error message:
Errore di generazione contenuto.
[Errore: Gli articoli con scorrimento uniforme devono contenere almeno una pagina singola. Aprite la finestra di dialogo Proprietà per modificare le opzioni di scorrimento uniforme.]
I try to translate:
Generating content error.
Error: the articles with smoothScrolling must contains at least a single page. Open the dialogue window Property to modify the options for the smoothScrolling.
Actually the Indesign source files 002_v.indd and 002_h.indd have already two pages so I do not understand what the error means. It just says to modify the property, but this means I can not have the smoothScrolling on "always" and I do not understand why!
I just would like to have a "smoothScrolling" effect between two pages of various articles using the sidecar.xml file!
Please someone can help me?

Smooth scrolling and flattenig does not work in combination. I think there
is no way to enable that.
—Johannes
(mobil gesendet)
Am 01.03.2012 17:19 schrieb "Bob Levine" <[email protected]>:
   Re: Sidecar.xml not working with smoothScrolling created by Bob Levine<http://forums.adobe.com/people/BobLevine>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4239654#4239654>

Check Writer XML - Check count different between XML and PDF

Hello all, Check writer XML ends in a warning. Hence the user can't see the output. I go to the server and grab both the .XML and the .PDF files. The PDF file as 93 checks but the actual .XML file has 112 checks. Hence the warning. Did anyone experience the same problem? Any help is highly appreciated.
Thanks, Naveen G.

Hi,
We just figured it out. From SYS Admin> Profile> System, we increased the values of Concurrent: OPP Process Timeout and Concurrent: OPP Response Timeout from 300 to 900. Now Check Writer XML CompleteS without any warnings. I appreciate your response.
Thank You, Naveen G.

Check Writer(XML)

Hi Guys,
            Need your quick help. Most of you are aware of Check Writer(XML) seeded report. I could get the data for all the Business Groups dynamically.
But the Logo and the Address of the BG remain same for any sorts of parameters. The Logo and the address are defaulted as Oracle.
Could you lemme knw how shd the logo and the address of the BG be changed?
            Any i/p is highly appreciated.
            Thanks in advance.

Hi Swat,
You need to create your own Custom template.
Just cope the seeded one and change the logo to whatever you want.
How to Register Custom BI Publisher Templates for Use with Oracle XML-based US Payroll Reports (Doc ID 783942.1)
Cheers,
Vignesh

Xml not working on CSS11500

We previously used CSS 11000 series and made some scripts with xml files to perform some actions on it.
This was working fine.
No we replaced these Css'es with CSS11500 series.
When i now run these scripts on the CSS11500 i get the message:
AUG 8 13:58:30 1/1 6039 NETMAN-4: httpRpmPut: Not a well-formed XML document
I checked the Xml file with a validator and it is OK. I also used other apps to send it to the CSS but still the same result. The scripts are still working on the 11000's.
It's just a simple file also defined on these Cisco site:
The XML file:
<?xml version="1.0" standalone="yes" ?>
<config>
<action>interface 2/1</action>
<action>admin-shutdown</action>
</config>

I am not sure if this is supported on the CSS 11503 and 11506 . Please check the documentation to verify. http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_720/index.htm

Check writer XML not working.

Similar Messages

Maybe you are looking for