Checked in documents don't retain changes in AC 1.3

Since upgrading to Apple Configurator 1.3, I've noticed that documents that are changed after a supervised device is checked out don't keep those changes when the device is checked in. This was not the case in AC 1.2, where you could assign a document to a user, check out a supervised device to that user, then -- after the device is checked in -- export the marked up document (saved to iTunes) to the host computer (running OS 10.8.4) with all the changes intact.
I've looked for a thread on this problem, but with no success. Also reported the issue to Apple, but received no reply. Anyone else with the same experiences or a possible workaround?

Thanks for the input!
Restarting the computer was the obvious first thing to try, but had no effect.
I have over 2GB free memory and still experiencing the issue.
It does take a few seconds to load the Live View for the first time, but that's not my problem. My problem is that with Live View already loaded, it takes over 30 seconds after saving changes to the php file before I can see the changes in the Live View (I'm clicking the refresh button once a second, and on the thirty something time I'll finally see my changes).
With "Preview Using Temporary Files" turned off, I get the behavior I've been describing.
Turning "Preview Using Temporary Files" on does actually mitigate the issue for me, though, so thank you for that suggestion!
     - I can see changes in my Live View instantly after saving and clicking the refresh button.
     - I can see changes using Preview in Browser instantly too... but the browsers refresh button has no effect (which makes sense since the temporary file it's looking at hasn't changed).
     - I can actually get some work done now.
However, I still feel that I should be able see my changes in Live View immediately after saving and clicking the refresh button without using "Preview Using Temporary Files", and I'd like to be able to leave the page open in my browser and just click the browser's refresh button to see my recently saved changes instantly.
So Long Story Short:
     Using "Preview Using Temporary Files" has definitely helped!
     But I still have no way to see my changes immediately without using temporary files, so something still seems fishy.

Similar Messages

Cloud document does not retain changes

Recently I have uploaded some documents to cloud documentand found that I have lost my changes like highlight text, I think it must be in sync with my local document.

How are you uploading the documents to Cloud? Can you please provide more details on your workflow, OS, Reader version etc?

Creative Cloud Student and Teacher Edition .I use the Macbook.I got the mail that said my order was checked,but I don't get the number.So I still use trial.Hoe can I change my character into member?

Creative Cloud Student and Teacher Edition .I use the Macbook.I got the mail that said my order was checked,but I don't get the number.So I still use trial.Hoe can I change my character into member?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Checking parked documents before month change in OB52

Hi
I have following requirement:
I park FI document in Novemeber. It was not posted to books of account. But i closed my november month in OB52 without checking parked document list. It gave little problem to me.
Now i want to know is there any settings where system will pop out (at the time of OB52) that the month is not complete. It means there are some documents pending to be posted or depreciation run is not done, etc.
Please help.

Hi Expert,
You can open the November month, which is not suggested.
But, you post the parked documents in special periods(i.e., 13,14, 15 and 16)
We use special periods for adjustment postings...
Regards,
GK
SAP

Placed an image in a new Illustrator document. Tried to change the Output Mode in the Output Dialog but could not select "Separations Mode".

Placed a DCS2 document image in a new Illustrator document.
Tried to change the Output Mode in the Output Dialog but could not select "Separations Mode".

I would check with the makers of ULTRASEPS.
I never heard of it, just checked their website, I don't think they support Illustrator:
What do I need to use UltraSeps?
UltraSeps requires Adobe Photoshop version CS2 or higher on Windows and Macintosh.
Its also 100% compatible with Photoshop Creative Cloud and Creative Cloud 2014.

Office 2013 vs SharePoint 2010 - Unable to check out documents to SharePoint drafts folder

My company is foisting Office 2013 on us without upgrading SharePoint 2010 Enterprise. One of the issues I have discovered since receiving Office 2013 is that SharePoint no longer provides the option to save checked out documents to my local drafts folder.
This is despite having Office set to save checked-out files to the server drafts location and the Office Document Cache Handler enabled in IE9. Is there a registry setting or something I can change that will re-enable this feature?

Hi Nellie,
According to your description, my understanding is that you want to re-enable the add-on Office Document Cache Handler in IE9.
We can re-enable the add-on in IE9 using Group Policy:
Launch the Group Policy Editor.
Go to User Configuration > Administrative Templates > Windows Components > Internet Explorer > Security Features > Add-on Management >
Add-on List.
Set this policy to 'Enabled'.
In the Add-on List, add the CLSID of BHO (Browser Helper Object) (i.e.) {B4F3A835-0E21-4959-BA22-42B3008E02FF} as the ‘Value Name’ and 1 as the 'Value'.
Log out of the machine and log back in again for the setting to take effect.
More references:
http://support.microsoft.com/kb/2463597/en-us
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Filename problems when checking out documents

Hi,Client machines are using Windows NT4 SP6 and Internet Explorer 6.0.2800.1106CO. Environment is Plumtree 4.5 SP1, Collab Server 2.02.We have an issue whereby when users check out documents with periods in the filename, the default filename for the downloaded file is different from the original.Eg. If a document named test 0.1.docis uploaded, when this file is checked out, Internet Explorer will try and save it at test (0)0.1.doc. This means that users have to either manually change the filename in the Save As dialog box, or rename the file to it's correct name before checking it back in.Is this an issue Plumtree is aware of, and is there a workaround or fix?Thanks.Mun

Further investigation into this problem shows it does not occur when downloading using a straight A link. Eg. Internet Explorer does not change the filename if excutable 0.1.exe is used; only when downloading through Plumtree (checking out files).This is Plumtree Collaboration Server core functionality.Can anyone from Plumtree shed any light on this?Cheers,Mun

Document being distributed no changes not possible and btadminh could not be locked

Hi All,
I am getting ERROR: "document being distributed no changes not possible" & WARNING:"BTadminH could not be locked" in CRM WEBUI while trying to edit the order.
I checked all the BDOCs and smq1, smq2 ,smw01 here are no queues stuck here.
I also run distribution check FM, whenever i run it will be unlocked and able to edit. but this is not the solution for me because this error and warning getting to every new order (transaction) .
thanks,
Vinnu.

Hi,
Check the initial status settings, there should not be any distribution lock maintained.
Award point if it is helpful
Regards,
D Singh

Linked images in my Word document don't show up in RoboHelp

I'm using RoboHelp 8 and Microsoft Word 2003 on Windows XP. I create a new WebHelp project. I added all the .png image files from my Microsoft Word directory to Baggage Files. I then used the Link>>Word Document function to add my Word document to the RoboHelp project. Set my preferences for style pagination, did a Force Update All. However, most of the images I inserted as links into my Word document don't come through into RoboHelp. Apparently I'm missing a setting somewhere but I can't figure out what it is. In addition, one of the images that did come through is horribly degraded.

Still no joy. All of the images in my Word document are linked .png files.
Here's the step-by-step of what I just did:
Open Word document
Tools>>Options>>General>>Web Options.
Change setting. Click OK
Click OK
Change text on page one of document to make sure document is "dirty".
File>>Save As.
Increment number in file name.
File>>Exit.
Launch RoboHelp
Start new project
Add all .png files to baggage.
File>>Link>>Word Document
Select appropriate Word file.
File>>Project Settings>>Import tab
Edit Word conversion settings to set pagination for heading styles and set Convert Word list to RoboHelp list
Click OK
Click Apply
Click OK
Right-click Word document in HTML Files (Topics) and choose Update>>Force Update All
no joy

PDF documents on the web appear in the address bar, but the documents don't display.

In the last week, every time I have clicked on a PDF document in Firefox, a new tab properly opens with the correct address in the box (ending with .pdf), but the documents don't appear.....? It seems to be a problem with the Adobe reader plug-in, but I've deleted, and reinstalled, the app, and nothing happens. There is no update indicated in the plug-in check.

Sorry I do not have answers, and do not know details of the Mac/Adobe plugins problems.
Conspiracy theorists may wonder whether Adobe is constantly reviewing cost/benefit of supporting various OS s & Browsers.
One may note
* Flash Ubuntu development has effectively ceased, with all support ceasing in a few years http://www.adobe.com/devnet/flashplatform/whitepapers/roadmap.html
* Firefox on Windows Flash11.3 et seq has had many problems, I certainly have not noticed Adobe rolling out rapid and successful fixes for those problems
* and Android support was dropped http://blogs.adobe.com/flashplayer/2012/06/flash-player-and-android-update.html

Hyperlinks in linked Word documents don't work

Hello All,
I'm having a problem with hyperlinks and I'm hoping you can help me. I have a RoboHelp HTML 8 project built out of Word 2007 linked files. There's a dozen Word files right now, but I'm hoping to scale up the project eventually. Each file is a topic in the CHM.
I have two problems when I generate the CHM:
1. Links to anchors within the same Word document generate extra subtopic files. Each extra topic begins at the anchor point. The links work, but I'd like to avoid having extra topics cluttering the TOC.
2. Links to anchors in other Word documents don't work at all. When I examine the HTML in Robohelp, I can see that RoboHelp has generated an empty link. When I link to a Word document without specifying an anchor point, the link in the CHM is to the document itself and not the topic, which is useless for my purposes.
For example, the generated HTML for each of these types of links looks like this:
Link test: <a href="#_Using_Styles">Later in the same topic.</a> <== This one works, but generates an extra subtopic
Link test: <a href="" target="_self">To another topic.</a> <== This one doesn't work at all.
Before you ask, yes, I have checked the "Convert References to Hyperlinks" box in the RoboHelp Word conversion settings. According to Adobe documentation, that's all I need to do... So what am I doing wrong?
Thank you in advance for any suggestions,
Susie

I have an update: Adobe got back to me and confirmed that the inter-document/inter-topic link issue is an actual RH
bug. I'll check back in here when I have more news.

Document is being distributed - changes are not possible

Dear Guru's
I have an issue when making a quotation transaction. After i saved the quotation transaction, i would like to change the window into edit mode.
So i have to click the display or change button and then after i click that button, there is an message text "Document is being distributed - changes are not possible" but after i wait for some minute, system still can not be change. and still appearing a message text "Document is being distributed - changes are not possible"
Please could u give some information about this issue?

The order in the CRM system remains in status 'to be distributed'
because it waits for an answer of the OLTP system that the order has
been successfully saved.
The reason could be due to the following:
1. Check in your system the delta download is active ? Did you perform
 an initial download of SALESDOCUMENTS ?
 If you check in transaction R3AC4 there must be an entry for
 SALESDOCUMENT to enable a successfull delta download.
 Without a successful initial download of this object, no delta
 download will be performed. Please refer to the SETUP AND
 DOWNLOAD guide you will find in the service market place
 http://service.sap.com
2. Check if there are any ABAP Dumps related in OLTP ? If yes, status
 will always be in distributed as CRM is still waiting for a reply
 from OLTP.
3. Check your inbound/outbound queues are working.
The note 490932 will help you to check your dataexchange
customizing.
Please, reward points if it helps you.
Regards, José Ignacio

Sending Pages formatted document by apple mail changes font.

I have an iMac 2.66 GHz, 4 GB RAM and using OS 10.6.2(SL) and iWork '09 & Apple's Mail App.
A friend prepared a Pages document and sent it to me using Apple's Mail app.. He is using OS 10.5 and iWork '09. He told me that he used the Arial Font and all the Text & Images (using the Layout mode in Pages) looked fine on his computer (iMac). When I received his e-mail and opened his document, I notice that the document did not looked well. The text boxes were running into each other AND his original Arial Font had changed on my Desktop to Helvetica. BTW, I have used Helvetica in MY Pages documents in the past. I requested my friend to send me the same doc in PDF format.and it all came out just fine with proper spacings, etc. He also tried sending "compressing" the file via Finder menu: File>Compress(file name).pages,but results were as bad.
Can you help explain why the changes?? Thanks, Bob

I am not saying your friend is deceiving you or not to be trusted, just that +a lot+ passes people's notice. I could quickly check the document but have to go away to Sydney for a week or two and won't be able to get the email.
Is there a chance this document started on a PC, either as a Word .doc or template, where the Arial MT font was used?
I'd also check if you have a style "Normal" in the document, that is a dead give away that it came from MsWord.
I just checked, and you should too, the Arial fonts installed on my Mac which are labeled Arial Regular, Italic, Bold and Bold Italic are in fact all ArialMT © Microsoft. You can get that information in Font Book, select the font and +Show Font Info+ (command i). I can't swear to the origin of my fonts though, a lot gets installed without my knowing, but they look like the Mac OSX fonts.
If you do find these fonts with Font Book, turn them on and see what happens when you open the document.
The Arial MT font may also be buried in the styles of the document or in Section templates that you may or may not have used. To clear the styles of the font you can force a new style over the existing ones by creating sample text and go to the Styles Drawer click on the arrow next to the style and go "Redefine Style from Selection".
Once you have cleared out the document use the clean copy to share with your friend.
Peter

Use of Configuring "Stochastic Check of Documents"

Hi All,
I have a scenario I need to change the Invoice workflow at runtime based on some invoice document value......
For this I have found a BADI BBP_STOCH_CUST_BADI.... this gets triggered only when we Configure "Define Stochastic Check of Documents" in SPRO Supplier Relationship Management -> SRM Server -> Cross Application Basci Settings ->SAP Business Workflow -> Define Stochastic Check of Documents....
This says that using this configuration you can change the approval workflow from standard one to the anyother workflow....Can anybody jus give focus when exactly this step can be configured so that I can make use of BADI?
Or can suggest any other BADI which can be used to change the workflow based on the one of the invoice document value?
Thanks In advance.
Yaseen M

The flag indicates whether field inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field. I.e. type n(2) is '00'.
When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.

Checked in documents don't retain changes in AC 1.3

Similar Messages

Maybe you are looking for