Checking for file conflicts: could not get filesystem information

When I try to install a new package with pacman 4 I got the following warning just after pacman has done "checking for file conflicts":
warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
After the warning message is printed, the installation continues normally.  This warning message has never shown up before.
I have ntpd running in a chroot as a non-root user (instructions).
I am wondering if anyone else gets the same warning message and if this 'problem' can be solved.
I forgot to say: the file is still there according to ls and is not empty, but the contents differs form the /etc/resolv.conf-file.
tim@tim-notebook:~$ cat /var/lib/ntp/etc/resolv.conf && echo && cat /etc/resolv.conf
# Generated by NetworkManager
# Generated by NetworkManager
nameserver 192.168.1.1
Last edited by timothy (2012-01-19 00:15:51)

I'm not sure how to do that or I do not know exactly what you mean.
tim@tim-notebook:~$ pkgfile -gs "*etc/resolv.conf"
core/filesystem
extra/archboot
But you probably already knew that.
Running pacman with the --debug option did not gave me any more clues.  All I know now, is that this message is printed when the moundpoints are examined:
stderr 'pacman -Syu--debug' output wrote:(...)
debug: checking possible conflict: /var/lib/
debug: file is a directory, not a conflict
debug: checking available disk space
warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
debug: mountpoint: /var/lib/ntp/proc
debug: mountpoint: /var/lib/ntp/lib
debug: mountpoint: /var/lib/ntp/etc/services
debug: mountpoint: /tmp

Similar Messages

  • [solved] pacman 4 hangs after "checking for file conflicts"

    Like others, I removed yaourt and package-query because they conflicted with pacman4... not worried about that, I'll reinstall them later.
    I put the new pacman.conf in place (my old one wasn't really customized).  I left SigLevel = Never.
    Now, I can run pacman -Sy fine, but if I try to install anything, I it just hangs:
    sudo pacman -S audacity
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): audacity-1.3.14-2
    Total Download Size: 3.21 MiB
    Total Installed Size: 15.29 MiB
    Net Upgrade Size: -0.00 MiB
    Proceed with installation? [Y/n]
    :: Retrieving packages from extra...
    audacity-1.3.14-2-x86_64 3.2 MiB 1397K/s 00:02 [###########################] 100%
    (1/1) checking package integrity [###########################] 100%
    (1/1) loading package files [###########################] 100%
    (1/1) checking for file conflicts [###########################] 100%
    I've waited up to 20 or 30 minutes and nothing happens.  It's not just audacity, any package I try to install does this.
    Suggestions?
    Last edited by TheAmigo (2012-01-17 18:55:38)

    With --debug switch it prints:
    checking for file conflicts...
    debug: looking for file conflicts
    debug: searching for file conflicts: coreutils
    debug: searching for filesystem conflicts: coreutils
    debug: searching for file conflicts: ethtool
    debug: searching for filesystem conflicts: ethtool
    debug: searching for file conflicts: fail2ban
    debug: searching for filesystem conflicts: fail2ban
    debug: searching for file conflicts: gpgme
    debug: searching for filesystem conflicts: gpgme
    debug: searching for file conflicts: vim-runtime
    debug: searching for filesystem conflicts: vim-runtime
    debug: searching for file conflicts: gvim
    debug: searching for filesystem conflicts: gvim
    debug: searching for file conflicts: hdparm
    debug: searching for filesystem conflicts: hdparm
    debug: searching for file conflicts: inetutils
    debug: searching for filesystem conflicts: inetutils
    debug: searching for file conflicts: lib32-glibc
    debug: searching for filesystem conflicts: lib32-glibc
    debug: searching for file conflicts: lib32-gcc-libs
    debug: searching for filesystem conflicts: lib32-gcc-libs
    debug: searching for file conflicts: lib32-glib2
    debug: searching for filesystem conflicts: lib32-glib2
    debug: searching for file conflicts: lib32-gdk-pixbuf2
    debug: searching for filesystem conflicts: lib32-gdk-pixbuf2
    debug: searching for file conflicts: lib32-pango
    debug: searching for filesystem conflicts: lib32-pango
    debug: searching for file conflicts: lib32-gtk2
    debug: searching for filesystem conflicts: lib32-gtk2
    debug: searching for file conflicts: linux
    debug: searching for filesystem conflicts: linux
    debug: searching for file conflicts: nspluginwrapper
    debug: searching for filesystem conflicts: nspluginwrapper
    debug: searching for file conflicts: nvidia
    debug: searching for filesystem conflicts: nvidia
    debug: searching for file conflicts: qtwebkit
    debug: searching for filesystem conflicts: qtwebkit
    debug: searching for file conflicts: rpcbind
    debug: searching for filesystem conflicts: rpcbind
    debug: searching for file conflicts: unrar
    debug: searching for filesystem conflicts: unrar
    debug: searching for file conflicts: xscreensaver
    debug: searching for filesystem conflicts: xscreensaver
    checking available disk space...
    debug: checking available disk space
    Without the --debug switch
    Proceed with installation? [Y/n]
    (21/21) checking package integrity [############################] 100%
    (21/21) loading package files [############################] 100%
    (21/21) checking for file conflicts [############################] 100%
    Note that the 'checking available disk space...' is not printed without the --debug option although it doesn't look like being 'debug output'.
    I don't see much disk activity after that and the pacman process uses no CPU time and the process status goes to D in `ps` (man ps says: D: Uninterruptible sleep (usually IO)).
    Last edited by drrossum (2012-01-18 21:58:28)

  • [solved] "pacman -Syu" hangs after "checking for file conflicts"

    This is my third attempt.  I let it run yesterday for 20 hours on the theory that maybe it was actually doing something.  It always completes "checking for file conflicts" but never goes any further.
    Does anyone have any suggestions how to get it to continue?
    [ken@xxxxx ~]$ sudo pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra 1421.6 KiB 2.03M/s 00:01 [######################] 100%
    community 1775.0 KiB 3.00M/s 00:01 [######################] 100%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    Targets (27): binutils-2.23-1 coreutils-8.20-1 cryptsetup-1.5.1-1
    device-mapper-2.02.98-1 emacs-24.2-2 filesystem-2012.10-2
    firefox-16.0.2-1 gcc-4.7.2-2 gcc-libs-4.7.2-2 glibc-2.16.0-5
    hwids-20121022-1 imagemagick-6.8.0.3-1 libidn-1.25-1
    libwbclient-3.6.9-1 linux-api-headers-3.6.3-1 lvm2-2.02.98-1
    mkinitcpio-0.11.0-1 nspr-4.9.3-1 nss-3.14-1
    nss-myhostname-0.3-3 smbclient-3.6.9-1 systemd-195-2
    thunderbird-16.0.2-1 tzdata-2012h-1 util-linux-2.22.1-2
    wget-1.14-2 xulrunner-16.0.2-1
    Total Download Size: 47.80 MiB
    Total Installed Size: 550.57 MiB
    Net Upgrade Size: 6.43 MiB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from extra...
    libwbclient-3.6.9-1... 19.5 KiB 407K/s 00:00 [######################] 100%
    smbclient-3.6.9-1-x... 7.9 MiB 2.71M/s 00:03 [######################] 100%
    thunderbird-16.0.2-... 17.1 MiB 2.92M/s 00:06 [######################] 100%
    xulrunner-16.0.2-1-... 22.9 MiB 2.92M/s 00:08 [######################] 100%
    (27/27) checking package integrity [######################] 100%
    (27/27) loading package files [######################] 100%
    (27/27) checking for file conflicts [######################] 100%
    Last edited by KenJackson (2012-10-30 14:25:05)

    Allan wrote:Can you run with --debug?
    OK.  That garnered an additional piece of info.  Here's the end of the long output:
    debug: searching for filesystem conflicts: wget
    debug: searching for file conflicts: xulrunner
    debug: searching for filesystem conflicts: xulrunner
    checking available disk space...
    debug: checking available disk space
    Disk space?  I think I have enough disk space.
    [ken@xxxxx ~]$ df
    Filesystem Size Used Avail Use% Mounted on
    rootfs 47G 11G 34G 25% /
    dev 2.0G 0 2.0G 0% /dev
    run 2.0G 292K 2.0G 1% /run
    /dev/sda3 47G 11G 34G 25% /
    shm 2.0G 140K 2.0G 1% /dev/shm
    /dev/sda1 99M 21M 74M 22% /boot
    /dev/sda4 72G 1.9G 66G 3% /home
    Is disk space really the problem?  Or is that just where it hung?

  • Pacman hanging on "checking for file conflicts"

    I've tried running pacman -Syu on my laptop and pacman is simply hanging at the checking for file conflicts stage.  I've let it sit for several minutes, but it never seems to get past that stage.  The list of packages to be updated isn't long:
    Targets (5): bison-2.6.2-1 chromium-21.0.1180.75-1 flex-2.5.37-1 libldap-2.4.32-1 lm_sensors-3.3.2-4
    This is being done on a laptop that was only recently rebuilt with a new Arch install using the latest installation media.  The install went well and previous updates have worked with no problems.

    I'm glad you solved the problem but "pacman -Scc" shouldn't be necessary and makes it more difficult to recover in a variety of situations. You can always re-download old packages but having them in your cache makes it easy to roll something back and makes it possible to do this without, for example, a working network connection. I installed in November and I've never even run "pacman -Sc" let alone "pacman -Scc". (Though I have trimmed the cache to free up disk space using, I think, paccache.)

  • Google cloud print for officejet pro 8600 - could not get printer information from hp.

    I just purchased a new OfficeJet Pro 8600 today. Everything seems to work great except for the connector to Google Cloud Print. I can print from AirPrint, as well as emails to the hpeprint.com address, but when I try to register via the google site, I receive the "could not get printer information from HP" error message.
    The printer is connected via wireless ethernet, and seems to work find otherwise. I have no restrictions on who can send print jobs, and I have changed the email address for hpeprint.com a few times, as suggested in other forum threads, but it can never connect to the the Cloud Print service. I am at the latest firmware level listed on the HP website. I have tried to initiate the connection from multiple PC's as well as multiple web browsers.
    This was a big factor in purchasing this printer. Help anyone?
    This question was solved.
    View Solution.

    Hey rch33k, I am sorry for the ongoing issue that you are having accessing Google Cloud Print. This is being looked into as this is not a singular issue and is affecting other customers as well.  Engineers are currently investing this problem to try and provide a solution to it.  I want to again apologize and thank you all for your patience in this matter.  They only other thing to attempt at this time is to contact Google for further assistance to see if anything can be done on their end. Hopefully this will be fixed quickly
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Google cloud print "could not get printer information from hp"

    As of today google cloud print has stopped working with my laser jet pro. I started getting an error message that "hp eprint is unavailable at this time". I decided to remove my hp printer from google cloud print. I haven't been able to add it back in since. Every time I try to verify the printer with google cloud print I get the error message "could not get printer information from hp". Everything seems to be configured properly as far as I can tell. I even removed the printer from hp connected and readded the printer and have changed my printers email address. Help please! I am on Chrome OS and this is the only option I have to print.  

    The issue just kind of resolved itself today and I was able to add the printer. I'm assuming it was some kind of server issue on hp's end because I haven't changed anything since yesterday. 

  • I made a Blurb book through Lightroom 5, on another computer, backed it up on an external hard drive and tried to import it into my imac.  I got the picture files, but could not get the book I had worked on.  How do I find my book?

    I made a 'Blurb' book using Lightroom on a computer that was not mine.  I backed up the book on an external hard drive and then tried to import the book into my imac.  I wasn't able to retrieve my book.  The photos I used for the book project are there, but the 45 page book I made is not there.
    What do I need to do?

    You would need to go to the computer containing the book.
    Select the saved book in the Collection panel.
    Go to Grid View [ G ] and select all the images [Cmd/Ctrl][A]
    File>Export as Catalog and store on media you can use to transfer
    Bring this catalog onto your computer
    File>Import from another catalog and bring the transitory catalog into your master catalog.
    It should bring the images, your collections (including your book) and other settings into your own catalog.

  • HP Photosmart 7510 "Could not get printer information from HP" NOT SOLVED

    OK.  So, I have searched all over the forums for a clear solution to this problem, and I have yet to see one that applies to my printer (HP Photosmart 7510).  I have regestered the printer, selected 'everyone' in the allowed senders area, and am still receiving the same error message when trying to connect Google Cloud Print.  Being able to print my google docs is EXTREMELY important... can anyone shed light on this?
    If I have missed a post on my specific problem, I apologize for the double-posting. 
    Thanks

    amp85,
    The ePrint servers have been going through some heavy maintence here lately to upgrade the servers and it seems like it is causing issues with Google Cloud Print. I would keep trying and see if anything changes, it should resolve itself when the maintence has been completed. If you are still having issues after the next couple days, post back in here and let me know. Hopefully I'll have some more information about this issue by then if it has not yet been resolved. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • "could not get an output file for the document (error RWI 00314)"

    Hi
    We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve  the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
    Can some one please suggest  any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
    Thank's for your help

    Hi Sreeram,
    Earlier i also faced same kind of problem.
    To solve this kind of problems you need to shutdown the server.
    second thing is when patches missed that time also you will get this kind of problem.
    check j2ee connection is it properly working or not?
    Regards,
    samar reddy.

  • TS1814 I'm trying to update iTunes software, but when I go to Help/Check for updates, I continue to get the message: "The iTunes update server could not be contacted. Please check your Internet connection or try again later."  Is there another way to upda

    I'm trying to update iTunes software, but when I go to Help/Check for updates, I continue to get the message: "The iTunes update server could not be contacted. Please check your Internet connection or try again later."  Is there another way to update?

    Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • How do I install Netgear XE102 on my iMac?  It will not install off of the cd provided it appears to be only for Windows based computers.  Checked Netgear website and could not find a setup.exe file for Mac.

    Unable to install Netgear XE102 on my iMac.  Checked Netgear website and could not find a setup.exe file for Mac.

    That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

  • Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

    Hello Experts,
    I have successfully installed a ECC 6.0 server-ABAP +JAVA  system (DB2 v9.5 FP4 windows server 2008-x64 bit).
    Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
    I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
    I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
    I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
    I already tried Notes   784568 and 997510
    Relevant logs:-
    jvm_bootstrap.out
    =================================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    Attempt to fully materialize lob data that is too large for the JVM.
    Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
    Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
    ==============================================================================================
    dev_jcontrol
    =============================================================================================
    Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
    [Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
    [Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
    [Thr 4360] JControlCloseProgram: started (exitcode = -1)
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    =================================================================================================
    log_bootstrap_ID0140026.0
    ==========================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    ============================================================================================
    Eagerly looking forward to a solution from you experts..
    Thanks,
    Rakesh

    Hi,
    I am facing the same related problem with ECC 6.0.
    My dispatcher started it is showing yellow-  dialog queue standstill, J2EE status info unavailable
    after some time dispatcher has stopped.
    Please check my below trace file for dispatcher:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        DEV
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    114
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        13108
    Fri Nov 27 02:31:55 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 114 successfully loaded
         shared lib "dw_xtc.dll" version 114 successfully loaded
         shared lib "dw_stl.dll" version 114 successfully loaded
         shared lib "dw_gui.dll" version 114 successfully loaded
         shared lib "dw_mdm.dll" version 114 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3903
    Fri Nov 27 02:31:59 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapdev_DEV_03                           <
    DpShMCreate: sizeof(wp_adm)          15800     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
    DpShMCreate: allocated sys_adm at 08290040
    DpShMCreate: allocated wp_adm at 08292090
    DpShMCreate: allocated tm_adm_list at 08295E48
    DpShMCreate: allocated tm_adm at 08295E78
    DpShMCreate: allocated wp_ca_adm at 0869F2B8
    DpShMCreate: allocated appc_ca_adm at 086A5078
    DpShMCreate: allocated comm_adm at 086A6FB8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 08727E78
    DpShMCreate: allocated gw_adm at 08727EB8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 08727EE8
    DpShMCreate: allocated wall_adm at 08727EF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Nov 27 02:32:00 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 13356
      argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2919
      argv[5] = -DSAPSYSTEM=03
      argv[6] = -DSAPSYSTEMNAME=DEV
      argv[7] = -DSAPMYNAME=sapdev_DEV_03
      argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Nov 27 02:32:01 2009
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 114
    Release check o.K.
    Fri Nov 27 02:32:05 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Fri Nov 27 02:32:40 2009
    ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
    ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
    ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
    ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
    ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
    ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:50 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Nov 26 21:02:50 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA    13364 Ended         no      1   0        0                                                                         
    1 DIA    13372 Ended         no      1   0        0                                                                         
    2 DIA    13380 Ended         no      1   0        0                                                                         
    3 DIA    13388 Ended         no      1   0        0                                                                         
    4 UPD    13396 Ended         no      1   0        0                                                                         
    5 ENQ    13404 Ended         no      1   0        0                                                                         
    6 BTC    13412 Ended         no      1   0        0                                                                         
    7 BTC    13420 Ended         no      1   0        0                                                                         
    8 BTC    13428 Ended         no      1   0        0                                                                         
    9 SPO    13436 Ended         no      1   0        0                                                                         
    10 UP2    13444 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:55 2009
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (13340) (SOFT_KILL)
    Stop icman
    killing process (13348) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:13340  HANDLE:1564)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:56 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:13340  HANDLE:1564)
    wait for end of icman
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:57 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:58 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:59 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Please help me to start my SAP MMC.
    Thanks

  • I have a message: "Could not get session for the OEM Repository."

    Dear Sir,
    I browsed reports that has been published in OEM. But I received an error:
    "Could not get session for the OEM Repository. Check to ensure that the OEM Repository is up."
    What can I do?
    Thank a lot

    You will need to go into your Files and locate the song.  By default, iTunes saves songs in the iTunes Media Folder which can be found in the following locations:
    Mac OS X: /Users/username/Music
    Windows XP: \Documents and Settings\username\My Documents\My Music\
    Windows Vista: \Users\username\Music\iTunes
    Windows 7 and Windows 8: \Users\username\My Music\iTunes
    If you locate your song file, when you try to play it in iTunes, you will be given an option to locate.  Navigate to the file in the pop up window and iTunes will re-path the file location.
    Most people encounter this issue when moving to a new computer or if you have your music saved on an external drive or folder that you have since moved or removed.  The imperative part is finding the song so you can re-map it.

  • CDSSO Invalid Agent: Could not get agent for realm

    Hi,
    This post follows on from a previous post (http://forum.java.sun.com/thread.jspa?threadID=5276012) but describes a subsequent problem.
    I'm getting the following error in my amCDC log. I believe it is related to the post (http://forum.java.sun.com/thread.jspa?threadID=5162908&messageID=9623898)
    03/18/2008 10:17:58:826 AM GMT: Thread[httpSSLWorkerThread-443-0,10,Grizzly]
    CDCServlet.doGetPost: Query String received: goto=http%3A%2F%2Fbonecrusher.test.local%3A80%2F%3FsunwMethod%3DGET&RequestID=20798&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Fbonecrusher.test.local%3A80%2Famagent&IssueInstant=2008-03-18T10%3A18%3A09Z
    03/18/2008 10:17:58:826 AM GMT: Thread[httpSSLWorkerThread-443-0,10,Grizzly]
    SSOException caught: com.iplanet.sso.SSOException: Invalid session ID.
    03/18/2008 10:17:59:091 AM GMT: Thread[httpSSLWorkerThread-443-0,10,Grizzly]
    Forwarding for authentication to: /UI/Login?goto=%2Famserver%2Fcdcservlet%3FTARGET%3Dhttp%253A%252F%252Fbonecrusher.test.local%253A80%252F%253FsunwMethod%253DGET%26RequestID%3D20798%26MajorVersion%3D1%26MinorVersion%3D0%26ProviderID%3Dhttp%253A%252F%252Fbonecrusher.test.local%253A80%252Famagent%26IssueInstant%3D2008-03-18T10%253A18%253A09Z
    03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
    CDCServlet.doGetPost: Query String received: TARGET=http%3A%2F%2Fbonecrusher.test.local%3A80%2F%3FsunwMethod%3DGET&RequestID=20798&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Fbonecrusher.test.local%3A80%2Famagent&IssueInstant=2008-03-18T10%3A18%3A09Z
    03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
    WARNING: Advice List is : null
    03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
    CDCServlet.doGetPost: targetURL = http://bonecrusher.test.local:80/?sunwMethod=GET
    03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
    CDCServlet.doGetPost: gotoURL = http://bonecrusher.test.local:80/?sunwMethod=GET
    03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
    CDC Servlet: Directory matches for http://bonecrusher.test.local:80/ is:{AMIdentity object: id=TestCDSSOAgent,ou=agent,dc=test-sun,dc=local={objectclass=[person, inetorgperson, organizationalperson, inetuser, top], sunIdentityServerDeviceKeyValue=[agentRootURL=http://bonecrusher.test.local:80/, agentRootURL=http://bonecrusher.test.local/], sunIdentityServerDeviceStatus=[Active], userpassword=[Q8Ea8sKa1CMyUaxgkqhC0PVeKV8=]}}
    03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
    CDC Servlet: Restriction string for: http://bonecrusher.test.local:80/ is: id=TestCDSSOAgent,ou=agent,dc=test-sun,dc=local [bonecrusher.test.local, bonecrusher.test.local]
    03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
    ERROR: CDCServlet.doGetPost:Exception occured
    java.lang.Exception: Invalid Agent: Could not get agent for the realm
    at com.iplanet.services.cdc.LdapSPValidator.validateAndGetRestriction(LdapSPValidator.java:200)
    at com.iplanet.services.cdc.CDCServlet.redirectWithAuthNResponse(CDCServlet.java:303)
    at com.iplanet.services.cdc.CDCServlet.doGetPost(CDCServlet.java:262)
    at com.iplanet.services.cdc.CDCServlet.doGet(CDCServlet.java:208)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:718)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
    Based on the previous post I believe it has something to do with the validity checks performed by the CDC. The post describes 3 checks and I believe my solution is failing one of these, however I am not sure which.
    As far as I understand it my logs above demonstrate that the agentRootURL is correctly set, but I'm not sure what other values are needed.
    Any advice would be greatly received.
    R

    Quick follow up :)
    This problem was caused by the Access Manager instance not being able to resolve the IP address for 'bonecrusher.test.local'
    After I added the entry for this into the hosts file everything worked.
    R

Maybe you are looking for