Checking the details of SSL/TLS

In most of common browsers you can check what cryptographic algorithms or security mechanisms are used (and choose them). For example in Firefox (or any other Mozilla software) there's about:config and you can find there things like these:
security.ssl3.dhersa_aes_128sha
security.ssl3.dhersa_aes_256sha
security.ssl3.dhersa_camellia_128sha
security.ssl3.dhersa_camellia_256sha
security.ssl3.ecdhecdsa_aes_128sha
security.ssl3.ecdhecdsa_aes_256sha
security.ssl3.ecdhecdsa_des_ede3sha
and so on.
Thanks to that i know which algorithms is my browser exactly using in SSL/TLS connections. If i think that for example "3DES with EC-Diffie-Hellman and SHA" isn't the most secure set of algorithms for me, i can turn it off. I'd like to know which algorithms do exactly Safari use? It's an important thing because for example FF still uses for example ARC4 algorithm which isn't highly secure.
How to check it?
Safari version: 4.0.4 (531.21.10)
Operating System: Windows XP
Best regards,
Michael

Hmmmm ... not a lot of info in the following document from the Safari Development Center, and it's a bit dated too, but just in case it's of any use as a starting point:
[What encryption, authentication, and proxy technologies does Safari support?|http://developer.apple.com/safari/library/qa/qa2009/qa1537.html]

Similar Messages

  • The difference between SSL & TLS

    dear experts,
    i need to know The difference between SSL & TLS and in which situations i should i have to use them.
    thanks
    Labib Makar

    Labib,
    At a 10,000 foot level v3.0 was superceded by . v1.0.
    TLSv1.0 (RFC 4346) was an upgrade to SSL v3.0 (but they don't interoperate)
    This "Cisco.com document" describes the workings of both in some detail:  SSL: Foundation for Web Security
    it states this as some basic differences:
    TLS uses slightly different cryptographic algorithms for such things as the MAC function generation of secret keys. TLS also includes more alert codes.
    Also See: Wikipedia TLS
    As far as which to use, it would depend on if both sides (server/client) support each?  TLS v1.0 or v1.1 is newer.
    Most modern Browsers tend to support both.
    i.e.
    Firefox 3.5.7 supported both SSL v3.0 and TLS v1.0
    Internet Explorer v6 supported both SSLv2, SSLv3, TLS v1.0
    etc.
    Hope that helps.
    Steve Ochmanski

  • HT5878 how to check the detail of font being used for reading the file received by an email

    I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
    Thanks

    You don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
    openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
    The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
    You can also point this at your partner's SMTP server as well.

  • To Check the details of Installed package of ESS

    Hi,
    I need to migrate EP 6.0 server to new machine so migration is of type EP 6.0 -> EP 6.0
    But in Source system EP 6.0 We have Installed the ESS package of very old version. We dont know the version and patch level. Same we need to first install on the destination EP ? FOr that i need to check which version it is , from where  i can check ?
    Thanks & Regards
    PK
    Points will be awarded !

    Hi,
    You can check versions of any component deployed on portal with  this url
    http://<ephostname>:<port no>/sap/monitoring/SystemInfo
    At top right(just below sap logo) u can find a link all components...
    Click on that it shows versions of all components
    You do a CTRL+F to with the term ESS and see version of all ESS related components
    Hope it helps
    Cheers,
    Santhosh

  • Check the details about microsoft certification

    How can we verify a candidate has passed the microsoft certification exam or not??By providing the transcript ID can we know it?How employers will check whether someone passed the exam or not?Thanks.

    If you read the text at
    https://mcp.microsoft.com/mcp/tools/MCPDirectoryPreferences.aspx,
    it states:
    By entering an Access Code I allow Microsoft to disclose my certification information to any person that successfully provides the combination of my Transcript ID and Access Code.
    i.e. you need to CREATE an Access Code, enter it into the box and then click on submit.
    When you see answers and helpful posts, please click Vote As Helpful,
    Propose As Answer, and/or Mark As Answer
    Jeff Wharton
    MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCITP, MCDBA
    Blog: Mr. Wharty's Ramblings
    Twitter: @Mr_Wharty
    MC ID:
    Microsoft Transcript

  • How to check SSL/TLS Renegotiation Protocol Change?

    Hi:
    I am applying patch #12837860 (part of CPU jan 2012). The link below is the readme. I don't know how to check if I need SSL/TLS Renegotiation in step #8.
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=14106915#CHDECEJC
    8.After patching, see My Oracle Support Note 1301699.1, How the SSL/TLS Renegotiation Protocol Change Affects Oracle HTTP Server for more information on using SSL with Oracle HTTP Server.
    Would you please tell me how to check if I need and how to reset it? This is for EBS 12.1.3, DB 11.1.0.7, 10.1.2.3 and 10.1.34 on Linux.
    Thank you for your help in advance.

    Both. When you use the JSSE APIs you must explicitly initiate a rehandshake. Of course, if you are the responder and you receive a hello request or a client hello, you will respond to it. I'll have to think about if there is someway for the responder to reject a rehandshake attempt.

  • Disable SSL/TLS renegotiation

    Is it possible to disable SSL/TLS renegotiation in SJSWS 7.0?
    I'm asking because of the recently published SSL/TLS protocol flaw (CVE-2009-3555) described here: [http://extendedsubset.com/?p=8|http://extendedsubset.com/?p=8]
    Thanks and regards,
    Jostein Tveit.

    The TLS Renegotiation vulnerability is now addressed in Sun Web Server 7.0u7.
    For more details, please refer to
    [http://blogs.sun.com/jyrivirkki/entry/more_thoughts_on_web_server|http://blogs.sun.com/jyrivirkki/entry/more_thoughts_on_web_server] , forum announcement
    [http://forums.sun.com/thread.jspa?threadID=5420698&tstart=0|http://forums.sun.com/thread.jspa?threadID=5420698&tstart=0] and
    the blog [http://blogs.sun.com/webtier/entry/sun_web_server_7_0u7|http://blogs.sun.com/webtier/entry/sun_web_server_7_0u7] .

  • Report to check the quantity after we input in transaction CJR2

    Hi All,
    Is there any report standard to check the detail quantity after we input in tcode CJR2 (cost element and activity input).
    Thank you.
    Nies

    Hi
    Use CJI4.
    Prerequisites-
    1. Should have activated/allowed business transacton "write plan line item" by user status in OK02.
    2. Activate line items for CO version in KP96.
    Regards

  • How to check the current EHP stack level? in SAP

    Dear All,
    How to check the current EHP stack level? in SAP  . i have checked forum before i am posting but still comfused .
    same one said SAP_APPL , EA_Appl  and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
    some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
    Pls check the details and confirm either is ehp1 or ehp4 .
    Component version is simply shows SAP ECC 6.0 in system -> status.
    Software Component  - Release  - SP level
    SAP_ABA     701     0007
    SAP_BASIS     701     0007
    PI_BASIS     701     0007
    ST-PI     2008_1_700     0003
    SAP_BS_FND     701     0008
    SAP_BW     701     0007
    SAP_AP     700     0021
    WEBCUIF     700     0008
    SAP_APPL     604     0008
    SAP_HR     604     0029
    SAP_HRCAR     604     0029
    SAP_HRCAT     604     0029
    SAP_HRCAU     604     0029
    SAP_HRCBE     604     0029
    SAP_HRCBR     604     0029
    SAP_HRCCA     604     0029
    SAP_HRCCH     604     0029
    SAP_HRCCL     604     0029
    SAP_HRCCN     604     0029
    SAP_HRCDE     604     0029
    SAP_HRCDK     604     0029
    SAP_HRCES     604     0029
    SAP_HRCFI     604     0029
    SAP_HRCFR     604     0029
    SAP_HRCGB     604     0031
    SAP_HRCHK     604     0029
    SAP_HRCID     604     0029
    SAP_HRCIE     604     0029
    SAP_HRCIN     604     0029
    SAP_HRCIT     604     0029
    SAP_HRCJP     604     0029
    SAP_HRCKR     604     0029
    SAP_HRCMX     604     0029
    SAP_HRCMY     604     0029
    SAP_HRCNL     604     0029
    SAP_HRCNO     604     0029
    SAP_HRCNZ     604     0029
    SAP_HRCPH     604     0029
    SAP_HRCPT     604     0029
    SAP_HRCRU     604     0029
    SAP_HRCSE     604     0029
    SAP_HRCSG     604     0029
    SAP_HRCTH     604     0029
    SAP_HRCTW     604     0029
    SAP_HRCUN     604     0029
    SAP_HRCUS     604     0029
    SAP_HRCVE     604     0029
    SAP_HRCZA     604     0029
    SAP_HRGXX     604     0029
    SAP_HRRXX     604     0029
    EA-IPPE     400     0018
    EA-APPL     604     0008
    EA-DFPS     600     0018
    EA-FINSERV     604     0007
    EA-GLTRADE     604     0008
    EA-HR     604     0029
    EA-HRCAR     604     0029
    EA-HRCAT     604     0029
    EA-HRCAU     604     0029
    EA-HRCBE     604     0029
    EA-HRCBR     604     0029
    EA-HRCCA     604     0029
    EA-HRCCH     604     0029
    EA-HRCCN     604     0029
    EA-HRCDE     604     0029
    EA-HRCDK     604     0029
    EA-HRCES     604     0029
    EA-HRCFI     604     0029
    EA-HRCFR     604     0029
    EA-HRCGB     604     0029
    EA-HRCHK     604     0029
    EA-HRCID     604     0029
    EA-HRCIE     604     0029
    EA-HRCIN     604     0029
    EA-HRCIT     604     0029
    EA-HRCJP     604     0029
    EA-HRCKR     604     0029
    EA-HRCMX     604     0029
    EA-HRCMY     604     0029
    EA-HRCNL     604     0029
    EA-HRCNO     604     0029
    EA-HRCNZ     604     0029
    EA-HRCPH     604     0029
    EA-HRCPT     604     0029
    EA-HRCRU     604     0029
    EA-HRCSE     604     0029
    EA-HRCSG     604     0029
    EA-HRCTH     604     0029
    EA-HRCTW     604     0029
    EA-HRCUN     604     0029
    EA-HRCUS     604     0029
    EA-HRCVE     604     0029
    EA-HRCZA     604     0029
    EA-HRGXX     604     0029
    EA-HRRXX     604     0029
    EA-PS     604     0007
    EA-RETAIL     604     0007
    FINBASIS     604     0008
    ECC-DIMP     600     0018
    ERECRUIT     604     0008
    FI-CA     604     0008
    FI-CAX     604     0007
    INSURANCE     600     0018
    IS-CWM     600     0018
    IS-H     600     0024
    IS-M     600     0018
    IS-OIL     600     0018
    IS-PS-CA     604     0007
    IS-UT     600     0018
    LSOFE     600     0018
    SEM-BW     604     0008
    ST-A/PI     01M_ECC600     0001
    Regards
    Edited by: satheesh0812 on Nov 17, 2011 7:57 AM

    Hi Sateesh,
    SAP_ABA 701 0007
    SAP_BASIS 701 0007
    PI_BASIS 701 0007
    ST-PI 2008_1_700 0003
    SAP_BS_FND 701 0008
    SAP_BW 701 0007
    SAP_AP 700 0021
    WEBCUIF 700 0008
    SAP_APPL 604 0008
    Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
    EHP4 is derived from your component SAP_APPL 604.
    In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
    Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
    Hope this answers your query.
    Regards,
    Deepak Kori

  • What is SSL/TLS in File adapter

    Hi Folks,
    I read the concept of SSL/TLS in help.sap.com But, still I not getting complete use of this.   Please explain me about how and when we have to use this option.
    Thanks,
    Rohini

    this is nothing but FTPS (http://en.wikipedia.org/wiki/FTPS)
    Refer:
    How to configure FTPS in File Adapter.

  • Web auth supporting fragmented SSL&TLS packets in 7.0.116?

    Dear collegues and Cisco experts.
    I hope anyone of you can reply if this is supported on thew current platform (WLC5508 sw rel 7.0.116)
    I have not been able to reproduce this myself, but some problems have been reported after mid january, when KB2585542 might be the culprit.
    Is the internal webauthentication portal in above platform able to handle this, or is s/w upgrade inevitable?
    Does WLC guest portal w high cipeher option handle the Fragmentation  of SSL/TLS application records, as described in the following RFCs:
    TLS 1.0: http://www.ietf.org/rfc/rfc2246.txt paragraph 6.2.1
    SSL 3.0: http://www.ietf.org/rfc/rfc6101.txt paragraph 5.2.1
    Environment
    Windows XP Professional SP3 clients with Internet Explorer 8
    Wireless lan controller cluster with redundant(2) webauthentication anchors (all AIR-CT5508-XXX-K9 sw rel 7.0.116)
    Microsoft statement
    "After installing MS12-006, you may experience authentication failure or loss of connectivity to some HTTPS servers. This issue occurs because this security update changes the way that records are sent to HTTPS servers. To address an information disclosure vulnerability, SChannel now implements certain ciphers used in SSL 3.0 and TLS 1.0 in a more secure fashion. The updated behaviour is fully compliant with the RFCs, but it is something that has generally not been used on the internet before
    There are two fixes involved: the SChannel fix makes the new behaviour available, and a fix included in the December Cumulative Update makes Internet Explorer request that more secure option. The behaviour will change only if both are present"
    Sincere regards
    Mats Nilson
       AIR-CT5508-100-K9

    Debug says your client is being requested to anchor but not moving passed that....
    So from the looks of things, this has nothing to do with DHCP. Instead, you are either trying to Anchor your clients to a non-existant anchor, or something is royally hosed with mobility.
    I'd suggest debug client   and "debug mobility handoff enable"  from this same WLC as well what ever other WLC your client is being sent to....

  • How to get the details of Calc. Formula

    Hi,
    Please let me know where can I check the detailed formula which is defined for subtotals(ex. Net value, list price etc.) in the pricing procedure that means how get the details of Calculation Formula which is maintained for price condition in the pricin procedure in CRM and ECC.
    Please do needful
    Thanks and Regards,
    Venkat

    Hi Venkat,
    the source of a calculation formula in ECC can be reviewed either by transaction VOFM or by using the F4 help for the calculation formula in the pricing procedure definition (source code button).
    As the formulas in CRM are implemented in JAVA and deployed on the VMC the source code is not available. Nevertheless the note 809820 and the attached guide provide some details. Nevertheless the VMC mini debugger provides some possibility to review the JAVA source code (see SAP note 1114609, transaction VMCJDB, double-click on dbsources and double click the JAVA source you like to review.
    Best Regards,
    Michael

  • How could I check the deatails of my eos camera by the serial number?

    I have bought a 60d camera , now I want to check the details of that.  I have got the serial number,  where could I use it?
    thanks.

    Like Ebiggs said, there is no reliable way to tell when the camera is made.  You asked this information so I assume that you didn't buy the camera new. I don't think the year it made is important. If you bought it used, you may want to to know the shutter count more and that is what most people care about when buying used camera (beside cosmetic of course). There is a website called eoscount.com where people have been reported that it can tell how many photo your camera has been taken. It only works in Windows OS with IE browers. If the camera is refurbished by Canon, they may reset the camera actuation.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • ISE Problem: EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain

    Hello, I´m stucked with this problem for 3 weeks now.
    I´m not able to configure the EAP-TLS autentication.
    In the "Certificate Store" of the ISE server I have Installed the Root, policy and the Issuing certificates as "trust for client authentication",and in the Local store I have a certificate issuing for the same issuing authority which sign the thw client ones.
    The ISE´s certificate has been issued with the "server Authentication certificate" template.
    The clients have installed the certificates  also the certificate chain.
    When I try to authenticate the wireless clients I allways get the same error: "     Authentication failed : 12514 EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain"
    and "OpenSSLErrorMessage=SSL alert
    code=0x230=560 ; source=local ; type=fatal ; message="Unknown CA - error self-signed certificate in chain",OpenSSLErrorStack=  1208556432:error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned:s3_srvr.c:2720"
    I don´t know what else can I do.
    Thank you
    Jorge

    Hi Rik,
    the Below are the certificate details
    ISE Certificate Signed by XX-CA-PROC-06
    User PKI Signed by XX-CA-OTHER-08
    In ISE certificate Store i have the below certificates
    XX-CA-OTHER-08 signed by XX-CA-ROOT-04
    XX-CA-PROC-06 signed by XX-CA-ROOT-04
    XX-CA-ROOT-04 signed by XX-CA-ROOT-04
    ISE certificate signed by XX-CA-PROC-06
    I have enabled - 'Trust for client authentication' on all three certificates
    this is unchecked - 'Enable Validation of Certificate Extensions (accept only valid certificate)'
    when i check the certificates of current user in the Client PC this is how it shows.
    XX-CA-ROOT-04 is listed in Trusted root Certification Authority
    and XX-CA-PROC-06 and XX-CA-OTHER-08  are in Intermediate Certificate Authorities

  • TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

    Hello,
    We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML.  It seems to me that some certificate
    might be invalidated. Can anyone please point me in the right direction? 
    Thanks, 
    Mitul
    TF215097: An error occurred while initializing a build for build definition :
    Exception Message: One or more errors occurred. (type AggregateException)
    Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
    at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
    at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
    at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
    at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
    at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
    Inner Exception Details:
    Exception Message: An error occurred while sending the request. (type HttpRequestException)
    Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
    at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
    Inner Exception Details:
    Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
    at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
    Inner Exception Details:
    Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
    Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
    at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

    Hi Mitul,
    Thanks for your reply.
    It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
    Please share your TFS Server detailed environment information here. And share your
    Build Service Properties dialog screenshot here.
    Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
    Clean the Cache folder on Server machine. The folder path is:
    C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.  
    After cleaned, on Server machine, click Start and select
    Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
    Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • People Search CellPhone - Office 365

    Hello, This is happens in our clients Office 365 SharePoint. We've been trying to add the User's Mobile phone number to the People Search Results. This is what we've done so far: 1. From Search Schema, Managed Properties, Mapped RefinableString99 to

  • Volume works only in read only mode

    Our Xsan volume is going nasty if any client tries to write on it , the xsan would crash and disconnect on all clients only way to bring it back is to shutdown all machines and power on again it works fine when the volume is mounted as read only thou

  • My PSD CS6 have problem when show blue tone colour

    (Example from extract picture) When I use my photoshop CS6 I have problem of blue tone colour look like Gamut warning but when i save to jpg. or other export file it normally.

  • Email print attachment should trigger by created by name...

    Dear All, I have one doubt related to Email print output. Presently in my project I get one request from the user that when he  create a order at that time a email should trigger so that he/she get a email notification . In standard Sap for this we n

  • Drive/Update Error problem

    Need help, please My WD MyBookLiveDuo has always worked well and I keep it updated. But I was was gone for a few days and got two messages:  Drive failedDrive failed in location AMon 13 Jul 2015 07:28:24 PM CDTSystem restartThe system has restarted.M