Chnages in the Graph properties are not getting reflected in the Browser.

Hi,
I have made some changes in the Graph properties in web template,
Eg. : 1. change in color of a series for a columnar type graph
2.change in the Text properties of Graph Series..
When I save the template and try to run in the Browser, these changes are not getting reflected.
Can anybody help me in this aspect ?
Thanks.
Regards.
Amol Bade

Same here :´(
Thanks In Advance
Juan

Similar Messages

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

The payment terms are not getting reflected in PO

Hi,
We are in SRM5.0 Extended Classic scenario.
We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in SRM system.
But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
Could you please suggest what may be the issue here.
Best Regards,
Siddappa

Hello Siddappa,
I am a little confused here with the scenario.
I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
Regards
Pramod

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Selection in the master table is not getting reflected in the child table

 I have a 4 level master detail relationship.I have a bounded taskflow where I have a master in the first view.The child (The other two levels as a tree) in the second view.I move to second view when i click the command link(Each row has a command link) of the master table (present in the first view).
At the very first time when i try to insert a row in the child it's successful .I am able to see the same in the second view (The corresponding child of the master row which i have clicked).The 2 view is not refreshed i have panel strech layout in the 2 view which i am refreshing(PPR) on inserting the row. The master table is not refreshed as it is in the 1 view.I am not manipulating the master table but it was being set to the first row the second time .Added to that the 2 view doesn't have parent table .

Thanks,
Raj.

Hi Frank,
I am using jdev 11.1.1.6 and integrated wls.
I have a single taskflow.I have a 4 level master detail.The vo's are connected through a view link . I have dropped the first level as a table . On selecting a row the corresponding children are displayed.The children are displayed as a tree. I have a tree context menu where i have inserted a row using popup . When the user clicks on the ok dialog i am commiting the data and refreshing the tree.
Now the problem is when i first create the row it's working properly . After when i try to create another row this time the currency of the first level is reset to the first row.
As suggested by you i have tried disabling the commit opertion . But the issue still occurs.
Thanks,
Raj
Edited by: RajaSekharReddy.M on Feb 26, 2013 6:03 PM

OLE images are not getting transfered to the pdf format

After executing the oracle report file 6i and while sending the report file directly from the report screen to the microsoft outlook mail by clicking the mail option from the report, the OLE Images are NOT getting converted to the mail attachment. Rest of the data is getting converted fine.

hope this is not the correct forum to place this question.
if not, mention DB and OS versions and state your problem more clearly
mark answered post as helpful / correct*

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
 <mx:DataGridColumn headerText="Type">
 <mx:itemRenderer>
 <mx:Component>
 <mx:HBox verticalGap="2">
 <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
 <mx:Label text="{data.type}"/>
 </mx:HBox>
 </mx:Component>
 </mx:itemRenderer>
 </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

Reg:tasks are not getting displayed in the uwl mss for particular user

hi all
Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
Thanks in advance.
Deepika

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

UWL : New tasks are not getting populated in the UWL

Hi Experts,
I configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).
When i am trying to configure the universal worklist system ,its givin me a caution message as System SHDCLNT012 does not support optimized delta pull . where SHDCLNT012 is the system alias name.
Is this the problem for not populating the new tasks in the UWL?
Please provide me the solution..
Thanks & Regards,
Sateesh

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

Incoterms are not getting copied at the item level

HI Gurus,
I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
Thanks,
Swathi

Check in VOV8 for your sale order type the following:-
a) If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
b) The field "ProdAttr.messages" should be blank
Next go to VOV7, select your item category and execute. There ensure that the box is ticked for "Business item". If this is unticked, then system will copy all header data to line item and you cannot change it.
thanks
G. Lakshmipathi

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

Text overflown in the first page is not getting printed in the next page

Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MD

Hi,
This issue is in ADOBE, I think there is no concept of Window in ADOBE,
The text box is placed inside a Subform.

When using pop up editor windows on a Joomla 1.0.15 website the URLs selected in the pop-up are not passed back to the main window

The Joomla content management system version 1.0.15 provides a content editor which uses pop-up windows to select images and files. When using any of these pop up editor windows since 3.6.9 the URLs selected in the pop-up are not passed back to the main editor window.
Up until FF 3.6.8 there were no problems, but FF 3.6.9 and 3.6.10 both exhibit this same problem, as does FF 4 Beta 6. (Support Question raised on this forum in early September when 2.6.9 was released but no response)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

[svn:fx-trunk] 11546: fix so the textLayout. swc does not get modified during the build process.

Revision: 11546
Author:   [email protected]
Date:     2009-11-06 15:42:05 -0800 (Fri, 06 Nov 2009)
Log Message:
fix so the textLayout.swc does not get modified during the build process.
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml

Chnages in the Graph properties are not getting reflected in the Browser.

Similar Messages

Maybe you are looking for