Choosing 'Export', I confront 'Error 108' message. Exporting  with file format mp4, etc doesnot work.

Choosing 'Export'  in file menu, QuickTIme pro (v.7.7.4) ,   I confront 'Error 108' message   with WIndows 7.
Namely
Error-108 : an unknown error occurred.
As a results  Exporting  with file format mp4, etc doesnot work. (windows 7. Quick time player v.7.7.4)
What are the reason? How do I operate this ?
Thank you.

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Similar Messages

  • Error -108 when exporting movie iMovie??????

    error -108 when exporting movie iMovie??????

    As a guess, try right-clicking on your Event and see if it allows you to Optimize Media. If it does, choose Optimize - Full.
    Your export should now work.

  • Domino Provision error: No message queue with that name

    Hi,
    Recently when we try the domino provisioning we often receive this error:
    No message queue with that name.
    This error is intermittent.
    Does any one has any idea why?
    Thanks

    Hi Wushilin,
    We are also encountering the same problem.
    Are you still facing the same issue?
    If you have solved the problem, can you share the solution?
    Thanks!

  • Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

    I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
    it gives error as "Can't open this file. There's a problem with file format".
    The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

    This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
    My files have to be compatible not just across readers but across operating systems.
    To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
    I personally test my PDFs using a variety of readers and PDF editors including
    PDF XChange (my favorite)
    Foxit (runner up for me and I recommend for most people)
    Adobe (the bloated monster)
    Nitro 9 (great for moving graphical elements around)
    ABBYY
    And the Nuance PDF Create toolsets
    Those are off the top of my head. There are a bunch on Android that I test with too.
    I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
    Here is what I've learned for my situation
    The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
    all fail using the built-in Windows 8/10 PDF reader.
    When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
    what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
    If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
    A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
    In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
     The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
    I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

  • CS5 - trying to load a new style .asl file - keep getting "error, because no parser or file format can open the file."  what gives?

    trying to load a new style for a project.  CS5 PSD.  the .asl file when dragged into the doc, gives the the following "error, because no parser or file format can open the file."  what gives?

    .asl files are layer styles
    You can go to Window>Styles and then load the styles from the styles panel fly-out menu

  • Yesterday i made some purchases in itunestore. the download went well. till the synch of itunes with ipod. some of the downloaded music did noch synchronize. the message was: the ipod does not support the file format (mp4). strange, right?

    Yesterday 20 november I have made some purchases in Ittunestore. The download went well. Till the synch of itunes with ipod. Some of the downloaded music did noch synchronize. The message was: the ipod does not support the file format (mp4). Strange, right? All the rest of downloaded music items has been synchronised without any problems. What may be the problem?

    For music files purchased via the iTunes Store, Apple has used the following file extensions -
    .m4a unprotected AAC format music files
    .m4p protected AAC format music files
    .m4b protected Audio Books
    .m4r unprotected ringtones in AAC format
    As you can see Apple have never used .mp4 for music files via the iTunes Store.
    For videos Apple use .m4v and these are in H.264 format.
    You could try changing the file extension to .m4a, first then see if it plays on your computer and then try re-synching it.

  • Error -108 while exporting video for Apple TV

    Anyone have a clue why I would be getting at error -108 in QuickTime Pro while converting an MPEG-4 file to Apple TV format? I was just doing File/Export and selecting "Movie to Apple TV" as the export format.
    I'm using QT Pro on Vista. The full error message is "Error -108: An unknown error has occured." It came up (probably) at the very end of the export. (The export seemed to running fine, and it was past 50% when I left to go out for awhile. The error was up on the screen when I came back.) The source video is about 2.5 GB, and should be a fairly normal MPEG-4 video, 30fps, 720x480. The error message itself isn't very helpful, obviously.

    sorry, are you sure?
    when I bought my ATV I compared ATV1 and ATV2 and the video performances are the same, infact I play my video in 1280x720 with my ATV but it is convert with toast.
    I compared the same video in ATV (720p) and in mpeg 2 (1920x1080 25 Mb/sec) with my medley 4geek and the quality is the same.
    Sorry, am I sure about what ?
    Apple TV 1 will only play 720p movies at 24 or 25 fps up to 5 Mbps or 960 x 540 at 30 fps, the Apple TV will play video at all frame rates at 720p and around about double the data rate.
    Are you sure your camera produces mpeg2 files. If so you might not see an awful lot of difference between the original and the converted videos because h264 is significantly more efficient than mpeg2, although I'd expect you to see some. If your files from your camera are actually h264 wrapped in an mpeg2 container then I'd expect you to see more difference.
    another problem, is impossible to create a video .mpe2(fullhd) with imovie, for that I bought ATV.
    I don't fully understand what you are asking here.
    why toast convert correct to ATV and apple software no?
    Possibly because when you are using toast you are choosing a datarate that is compatible with the Apple TV (ie 5 Mbps or less), whereas if you are using (for example) quicktime preset for the Apple TV, you might be making files that are compatible with the Apple TV 2 but not the Apple TV 2, but it's difficult to say without knowing what settings you are using.

  • IMovie '09: Export to Quicktime: Error -108

    I've been trying to export a movie - just over an hour long, primarily photos - to Quicktime. I was using the Apple Codec now I'm trying the MPEG-4 setting, with the HD 190X1080 16:9 size and 48,000KHz audio.
    Every single time I try I get the "error code -108" message - not enough RAM. However I'm using a 24" iMac with 4GB.
    I have NO ideas what-so-ever can some please point me in the right direction?
    I'm running Snow Leopard - I've restarted the machine, repaired the permissions, the only thing I can imagine it's related to is that some of the material (music) is running off of an external hard-drive. Please? Some one help!

    I would suggest trying it at 960x540. That will cut down the size by a factor of 4 and may let it fit in the RAM. This size upscales very nicely on most TVs because it is a simple transform to go to 1920x1080.
    If that does not work, you may need to split your movie into shorter pieces.
    What is your final destination? BluRay?

  • Imovie 2011 error - 108 when exporting

    Hi there,
    i have a macbook air 2011, 128gb (60 gb free) 4gb memory, mac os 10 7.3 lion.
    Don’t have TimeMachine (didn’t even set up TimeMachine for the first time)
    When trying to export a 720p file (regular export) in imovie
    (Estimated file size 2.6gb, 30 fps, H.264)
    The mac reaches the last ten minutes (after working two hours) of export and then stops and says cannot complete project: error – 108 occurred.
    Imovie can export fine a large size movie but not higher.
    already tried:
    1. duplicating project, renaming project
    2. tweaking with “Lion cache cleaner” (repair permissions, optimize RAM & Files)
    3. Shutting down
    Next logical step would be to clean the cache, no?
    Does anyone have a solution?
    TIA

    As a guess, try right-clicking on your Event and see if it allows you to Optimize Media. If it does, choose Optimize - Full.
    Your export should now work.

  • Error -108 while exporting from iMovie?

    Hi there, I try to export my project from iMovie but anytime appears a message that says that is impossible to export, error -108.
    How can I resolve it?
    Thank you, Riccardo
    iMovie version 9.0.4

    hello
    i have exactly same problem and just wondering if you found a solution?
    regards
    eva

  • Error 108 when exporting in Master file

    My project is a 2-hours multicam edit. And I have this error 108 when I go to the Final Cut Pro X share menu and select "Master files" (Fichier Master" en français).
    After a certain period of time, an alert will appear with this number.
    What I don't get is why it's working when exporting with the other entries from this Share Menu !
    Ps : I saw that this question was replied quite a time ago, but the given solutions don't work for me.
    (Mac Pro (Mid 2010) - OS X 10.8.4 - memory - 16 Go - FCP X 10.0.9)

    My project is 1920 x 1080 - 25i - surround - 48 khz
    When I use the export menu, it is said Video Codec : Source is Apple ProRes 422
    RAM is 16 Go - Hard Drives have plenty of room avail.
    As you might know this problem is known but never found any help. some say it's a bug...

  • Couldn´t export a movie  (error - 108)  Help!!, Couldn´t export a movie in 720  (error - 108)  Help!!

    I am traying to export an 5 minutes movie using Imovie, but I can´t.  An I need to fixt it. Help please!!

    Hi
    Error -108
    Error -108  memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    Can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Export Build Release - error 303 message - driving me insane

    Hi.
    I have built an application in Flex Builder. Just spent the
    entire morning/afternoon trying to figure out why the icons in the
    Application Descriptor file aren't being recognised and are giving
    an error 303 message.
    I have tried every possible path to the icons. my flex
    project is called "player" and i have put the png files in the src
    folder and still no success.
    i've read all the posts about checking the :"copy
    non-embedded files to output folder" but no success.
    the Air app runs fine if i disable the icons in the XML file.
    Help please!

    For anyone else with a similar problem couldn't get it
    working so created a new flex project and copied all the code
    across...but used the new app-xml file and it worked.

  • Error 1 message using "new file"

    I am trying to read a new filename path from a txt file. This filename path I use to create a new file to store data in. See attached test VI. The first time everything works fantastic but the second time the while loop executes the create "new file" generates a error -1 message and I do not how to solve it. I have a suspicion it has something to do with the refNum output of the "new file", but I am not sure and I do not know how to work around that either.
    Kind regards,
    Attachments:
    read_from_file_to_path.vi ‏47 KB
    filename.txt ‏1 KB
    TEXT.txt ‏1 KB

    The New File returns that error if the file already exists. To overwite the file when it already exists, wire True to the overwrite intput.
    LabVIEW, C'est LabVIEW

  • Trying to upgrade to Mountain Lion, error is  message; " product distribution file could not be verified. It may be damaged or was not signed"

    trying to upgrade to Mountain Lion, error   message; " product distribution file could not be verified. It may be damaged or was not signed" ??
    what to do? This is in App store. I followed the link e-mailed to me that an upgrade was available....... Puzzled.

    Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
    Step 1
    Back up all data.
    From the menu bar, select
     ▹ System Preferences... ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
    Step 2
    Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
    Step 3
    Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for