Chrush dump error and it become blue screen

i am using sony vaio laptop vpceh25en
it used to say that
chrush dump error and it become blue screen
and i dont know how to fix it. it was happen after a 8 months of time, now it happens.
it simultaniously shutdown with in 15 to 20 seconds after logon
during this my the blue screen appears as
shutdown is to prevent your system from failure.
help me to fix it.

We do need the actual log files (called a DMP files) as they contain the only record of the sequence of events leading up to the crash, what drivers
were loaded, and what was responsible.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

Similar Messages

Satellite P300 keeps crashing and giving me blue screens

Hello,
I got a Satellite P300, operating on Windows Vista home premium and its provided with a ATI Mobility Radeon HD 3650.
My laptop keeps crashing and giving me blue screens and windows says its the cause ls my graphic driver and the eror message is Atikmdag.
I tried everything (i think), i re-installes windows but this i had to do with making a recovery cd with the current settings because in some kinda way my F8 function doesn't work so i couldn't restore my Windows from my hard drive.
I also got the latest Ati drivers, this doesn't help either, i also re-installed them and tried to run my laptop on the windows drivers, this doesn't help either.
I really don't know what to do, can some one help me please?

Are you sure that you are running video drivers downloaded from a Toshiba site? Unfortunately the drivers may not be the root of the problem so it is important to eliminate them as the cause. AMD's recommended driver removal procedure is at [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of Toshiba drivers then your laptop should be in an as supplied state
I'd recommend you look at this [How to troubleshoot Display driver stopped responding and has recovered, ATIKMDAG.sys type errors|http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]

My IPhone 5s is frequently reboot and show the "blue screen"

My IPhone 5s is frequently reboot and show the "blue screen"
Error code:
{"bug_type":"110","os_version":"iOS 7.1.1 (11D201)"}
Incident Identifier: 9E7D62CD-E1FA-443F-81D7-91C2C4257098
CrashReporter Key:   7290c27dd593ba841d0e97282cc3b97158891820
Hardware Model:      iPhone6,1
Date/Time:           2014-05-12 00:16:32.851 +0300
OS Version:          iOS 7.1.1 (11D201)
panic(cpu 0 caller 0xffffff80042cd540): "LSU err reported via serror: 0x8820000000000017\n"
Debugger message: panic
OS version: 11D201
Kernel version: Darwin Kernel Version 14.0.0: Fri Mar 28 21:22:21 PDT 2014; root:xnu-2423.10.70~1/RELEASE_ARM64_S5L8960X
Kernel slide:     0x0000000003400000
Kernel text base: 0xffffff8003602000
Boot    : 0x536f9564 0x00000000
Sleep   : 0x536fe714 0x00073b45
Wake    : 0x536fe7f4 0x00000107
Calendar: 0x536fe89d 0x0007b3d4
Panicked task 0xffffff8085024c60: 16873 pages, 14 threads: pid 16: SpringBoard
panicked thread: 0xffffff8085cc6000, backtrace: 0xffffff8002d94b10
          0xffffff8003764a10
          0xffffff8003627968
          0xffffff8003605ce0
          0xffffff80042cd540
          0xffffff80042cd7a0
          0xffffff8003621394
          0x000000018f1256b4
Task 0xffffff8085025ba0: 38507 pages, 149 threads: pid 0: kernel_task
Task 0xffffff80850257d0: 321 pages, 3 threads: pid 1: launchd
Task 0xffffff8085025030: 1712 pages, 11 threads: pid 15: UserEventAgent
Task 0xffffff8085024c60: 16873 pages, 14 threads: pid 16: SpringBoard
Task 0xffffff8085024890: 838 pages, 2 threads: pid 17: installd
Task 0xffffff80850240f0: 465 pages, 4 threads: pid 19: fseventsd
Task 0xffffff8085023d20: 2053 pages, 2 threads: pid 20: vmd
Task 0xffffff8085023950: 2434 pages, 2 threads: pid 21: sharingd
Task 0xffffff8085023580: 1839 pages, 4 threads: pid 22: aosnotifyd
Task 0xffffff80850231b0: 1054 pages, 4 threads: pid 23: imagent
Task 0xffffff8085022a10: 1025 pages, 2 threads: pid 25: lockdownd
Task 0xffffff8085021ea0: 526 pages, 2 threads: pid 28: softwarebehavior
Task 0xffffff8085021ad0: 4005 pages, 30 threads: pid 29: mediaserverd
Task 0xffffff8085021330: 5819 pages, 17 threads: pid 31: backboardd
Task 0xffffff8085020f60: 410 pages, 3 threads: pid 32: AppleIDAuthAgent
Task 0xffffff8085020b90: 1197 pages, 3 threads: pid 33: routined
Task 0xffffff80850203f0: 568 pages, 2 threads: pid 35: wirelessproxd
Task 0xffffff808501fc50: 649 pages, 3 threads: pid 37: timed
Task 0xffffff808501f880: 250 pages, 7 threads: pid 38: syslogd
Task 0xffffff808501f0e0: 1627 pages, 5 threads: pid 40: wifid
Task 0xffffff808501e940: 1331 pages, 11 threads: pid 42: configd
Task 0xffffff808501e1a0: 1562 pages, 2 threads: pid 44: fairplayd.H2
Task 0xffffff808501d260: 1507 pages, 4 threads: pid 48: BTServer
Task 0xffffff808501c6f0: 707 pages, 3 threads: pi

    Rmbrown,
We'll get your phone working quickly again! Plz go to Settings>General>About and let us know the Available GB.
SarahO_VZW
Follow us on Twitter @VZWSupport

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit

After installing IOS8.02 my ipad air will not boot up. get white screen and apple logo and then a blue screen. over and over again.

Ipad air wifi only 16gb worked ok with IOS 8.0 . just did upgrade to 8.02 and now it will not boot up. I get a white screen with the apple logo and then a blue screen. it does this over and over. I need help. What do i need to do. Please help.

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, restore the iPad > Back up and restore your iOS device with iCloud or iTunes

SB Live ! 24 bit external USB and windows seven blue screen

;SB Li've ! 24 bit external USB and windows seven blue screen+ hi! i have installed windows seven 64 bit build 7600 RTM on my PC and i wanted to install also my USB sound card which is SB Li've ! 24 bit and i downloaded the beta drivers from creative. instalation was really fast and smooth but at the end i've got a message that the program has stopped to response and i have closed it. i did a system reboot and i have seen that the sound card has been installes succesfull and also the control panel. Sound was clear and really nice, all worked fine but sometimes im getting a blue screen on my windows with a code STOP 0x000000E and then a file named usbuhc.sys was the problem. i think that the sound card is the thing that is doing the blue screen becouse i have only a keyboard, mouse and the sound card SB Li've ! installed as USB.
Is it normal that i have those troubles on my PC ? is it my sound card my windows seven problem ? what should i do now ?
at the moment i have turned off the sound card so i will see if i get a blue screen or not.
thanks for any reply

? yes, i have also tried to download the beta drivers again and re-install them but i have still the same problem :/ it happens in a different time, sometimes after hour or sometimes after 0 hours when my computer is turned on. my system is mostly turned on becouse im downloading some stuff so it is running all the day, sometimes im surfing websites but its nothing special. I really dont know what to do :/@83.30.93.77

MBP "System Profile" error when try read "Logs" and long time blue screen

MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

I use the latest Firefox 13.0.1. I'm using Windows 7. After a day I updated my Adobe Flash Player, suddenly it crashed and showed a blue screen. Please help me.

My Firefox version is 13.0.1. I'm using Windows 7. Adobe Flash Player version is 11.3.300.265. A few minutes after opened the Firefox, suddenly it crashed and a blue screen showed up, it says there are unexpected error occured and forced my computer to be stopped. I need to restart the computer to see either it still show the blue screen or it just fine. After restarted, I use the Firefox once again, but this time, after about 30 minutes, it crashed again. The same blue screen showed up. As I expected, the new Adobe Flash Update crashes with the Firefox 13.0.1. Really need a solution here. Thank you.

Hi,
Blue screens usually indicate Windows system level problems involving device drivers like graphics card drivers, hardware errors (RAM, hard drive) etc. Malware may also cause this. Searching for the displayed error code would usually provide helpful pointers. The [http://answers.microsoft.com/en-us Windows forum] would also be helpful.

LR Mobile sync caused iPad mini to crash continuously and reboot with blue screen?

Hi,
I've been using LR Mobile on my iPad Mini (Retina) for quite sometime now without any issues. It worked flawlessly, until yesterday.
I'm not sure whether this problem was caused by the LR Mobile app or not but this was my experience.
Begin syncing a LR Catalog file (760 photos, needed 1.6 GB of space on my iPad). Sync and download was in progress. (I enabled the offline edit option).
After like 10 minutes, I checked my iPad to see the sync status and it crashed and restarted by itself.
After it booted, I opened LR Mobile and bang.... it crashed again.
This happened several times and I also begin to get the blue screen of death on the iPad.
Finally, it booted properly and I opened LRM and begin to re-sync. Things went smoothly.
I had to cancel the sync (around 650 photos were synced) as I had to rush to work and the sync process was taking too long (it took me like 3 hours to sync the 650 photos as the iPad would go into sleep and the sync process would stop. Plus the iPad was crashing and rebooting in between the sync process and caused a loss of time).
Anyhow, on the way to work I opened LRM and begin working on the images. Everything seemed fine.
Just an hour ago, when I unlocked my iPad and wanted to work on the images, it crashed again. This time it went in a reboot cycle and the screen went bonkers - got the blue screen, and weird visual distortions of the apple logo, and other unusual visual effects begin to occur. I thought the iPad was gone for, as it went off and wouldn't even restart. (I even tried doing a hard reset - Home + Sleep/Wake buttons).
Finally when it booted and restarted on its own, I immediately deleted the LR Mobile app and restarted the iPad.
It's been like 2 hours now and the iPad's working fine.
Did anyone experience similar issues like this? Or is it just me
I feel very annoyed because after waiting for hours for my catalog to sync, I had to delete the app and lost all my synced photos
Can the Adobe LRM team please clarify if this could have been cause by the LRM app?
I've been using LRM for a long time and never encountered such a problem. Could it be because the app required around 1.6 GB of space on the iPad and they sync/download process was taking like forever to get done. ( I had plenty of free space on my iPad. Had like 5.6 GB free on it).
Any help and advise would be truly appreciated

Hi,
Lightroom mobile should not be causing any iPad crashers, the issue with the crashing LrM is a known issue.
What would help would be if you can collect logs from your tablet and send them privately to me.
Only then we can know for sure if it's really caused by LrMobile.
We would need all your logs that you can find under these folders that are close to the date and time when your device restarted.
OSX: /Library/Logs/CrashReporter/MobileDevice/DeviceName/
Windows: C:\Users\AppData\Roaming\Apple computer\Logs\CrashReporter\MobileDevice\DeviceName\
Btw you need to sync with iTunes to see them.
thanks,
Ignacio

Updated to 10.6.4 and have blank blue screen - what should I do?

I updated to 10.6.4 and now have a blank blue screen - what should I do?

Did you do the combo update?
http://support.apple.com/kb/DL1048

Updated to snow leopard and now get blue screen

Hi there,
I recently updated to snow leopard and now I get blue screen on start-up.
I manage to get to enter my password and then to my desktop for a few seconds before it flicks back to my login.
I tried using disk utility from the install disc and it said HD appears to be ok. But it hasn't solved the problem.
Any help would be greatly appreciated
Thanks

See if you can find a solution here:
http://support.apple.com/kb/PH7212
Ciao.

I just powered on my mac book pro and have a blue screen with a flashing folder with a question mark in the middle, how do I get out of this?

I just booted my mac book pro and it is at a blue screen with a flashing folder with a question mark in the middle of it. How do I get out of it?

Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk.
(126818)

Start Up Issue-Gray Screen, Apple Logo And Cognition Wheel-Blue screen before start up at times but no longer starting up beyond gray screen and cognition wheel

Power button pressed.
Start up light okay
Chimes okay
Gray screen, apple logo and cognition wheel spinning and the loading bar underneath loading 1/10th of the way.
Loading bar doesnt load fully and then disappears.
Gray screen remains with apple logo and cognition wheel only.
No start up to desktop. Before start up to desk top which is not happening any more a blue screen appeared before the desktop appeared. When start up complete the ' Finder' had no responded and did not work' Multi coloured loading pointer continually turned. ' Network' could not be loaded in 'System Prefrences'.
Ive tried reading and following propts...Results NVRAM/PRAM - Logic board battery replacement. How much will this cost?
Hardware test - No problem found
Safe Boot - ' volume Machintosh HD could not be repaired.'
' Run time corruption detected on Machintosh HD device'
What do you suggest aside from taking it to a apple store?
Thanks Stephen

Lion or Snow Leopard? If Lion, boot into your Recovery partition (hold down the Command and R keys whilst booting) and use Disk Utility to verify and, if needed, repair the boot volume.
If Snow Leopard, use the installation disc and use Disk Utility in the same manner.
Clinton

No Disk Space and Now a Blue Screen...

help! my macbook pro warned me that it had no disk space left. I deleted some files and then restarted the computer. Now it will not turn back on completely. Will only show a Blue Screen...

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
If you see a blue screen at startup

Chrush dump error and it become blue screen

Similar Messages

Maybe you are looking for