CIN problem: Can't reverse the PART 2 postings

Hello Experts,
We have some cases where user capture and post excise invoice during MIGO having combination of capital goods and raw material.As we know SAP does not support combination of CG and RM. we have to restrict the user to post the combination of RM and CG during MIGO.How we can achieve this?
During PART2 of such cases gone wrongly, even if material is of RM type values goes to RG23BED account is 50% which is wrong.So we tried to reverse the MIGO and reverse the PART 2 entries through J1IEX, but system does not allowed to post the excise invoice through J1IEX.we get the error, Message class: 4F Error: 108. Combination of capital goods and raw materials not allowed.
During post the invoice through MIRO,also excise entries updated in MIRO wrongly.
Please help us in this regard urgently. we have quarter-end ahead.
We are awaiting for your reply.
Thanks,
Input

Hi,
we have to restrict the user to post the combination of RM and CG during MIGO.How we can achieve this?
I would like to know how system allowed you to post for combination of RM & Capital goods as i am getting this error "Excise Invoice Items are of different Register Type" - Message no. 4F140.
I think for these you will have to post adjustments entries using JV through J1IH.

Similar Messages

I have just updated to the latest io5 and have lost apps and their data, can i reverse the new update to get back what i had on there?

i have just updated to the latest ios 5 and have lost apps and their data, can i reverse the new update to get back what i had on my ipad?

There is no need to do that, I had the same problem pal! Just do this and all should be fine!
Delete one of the app's and re-install it, then for some reason everythign is restored to as it was!
Hope you get on fine, let me know!
Thanks
Dan

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie

The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade.

HT201274 I have erased my Ipad remotely thinking it was stolen. It has now been returned, but I don't want to switch it on and erase all information. Can I reverse the erase? If not, how do I restore the info?

I have erased my Ipad remotely thinking it was stolen. It has now been returned, but I don't want to switch it on and erase all information. Can I reverse the erase? If not, how do I restore the info?

You can't reverse the erase.
Restore from your iTune or iCloud backup.

How can I reverse the order of podcasts so I can listen in cronological order

How can I reverse the order of podcasts so I can listen in cronological order!

What I did was create a playlist for the podcasts and keep it sorted in reverse date order, which puts the oldest first. To prevent it from automatically playing the next podcast, I actually mark all podcasts as "skip when shuffling", and then play in shuffle mode. I also make sure all my podcasts have a genre of "podcast"; I discovered that if you use media type, the playlist doesn't update correctly on the iPod classic
So, what I've got is a playlist of the form: (play count = 0) and (genre = podcast), sorted in reverse date order.

How can I reverse the acction create with F110

When I use F110 for Automatic Payment Transaction,how can I reverse the document if it nessesary?

If the payment is done and accounting documents are created, then you have to use FB08 for reversal(FBRA for reset)
If the invoices are at proposal level, you can delete the proposal(EditProposal-Delete)
Rgds
Murali. N

Can I reverse the reversal document of MIRO ?

When i reverse the miro document ,the amount was not correct, Can I reverse the reversal document of MIRO ? if no , then what will be the solution?
Moderator: Please, search before posting

Hi Tamal,
Yes we can reverse the MIRO document.....You can use this T.Code MR8M
Her you can give Material document number.. then Execute it...
Regards
Madhu I

Can I reverse the order of finder lists or icons?

Hello,
I am finding some problems with Lion that I never seemed to have with Snow Leopard and would very much appreciate someone's help.
To cut a long story short I want to reverse the order of the files in finder, either in list or icon view (or maybe any kind of view). At the moment they are in date created order, but I have also tried in name order and cannot see any way to reverse the order.
At present the are show the newest file first but I want to see them in oldest first as they always were for me in OSX 10.6
Also... in date created view they appear in groups (eg previous 7 days, previous 30 days) I have never seen this before and find it particulalry annoying. I'm sure some people love it but for me it is one of the things that I most hated about windows, but at least in Windows I found it easy to turn off (along with reversing order!). Can anyone tell me how to stop OSX from doing this?
Much obliged,
Pablo

Welcome to Apple Support Communities. We're users here and don't speak for "Apple, Inc."
In Finder icon view, click the Arrange button and select which column you'd like to sort by.
In Finder list view, click the top header of any column to sort by that column. Clicking the same header again reverses the sort order (and the small 'arrow' at the end of the column name reverses direction too).
And using Finder, View, Customize Toolbar the Finder window toolbar can be customized to display icons only, text only or both, as well as adding additional icons to the default toolbar:
Message was edited by: kostby

Spool file problem,Can't see the query in output file.

Hello ,
I am facing a very old school kind of problem .....about spool file ....
The scenario -
I have made a script by name DB_Status_checkup.sql which i want to fire on the database to check the database status. In this script their are many queries regarding the data dictionary views to know about the database. It consist of nearly 25-30 different select queries..
The problem is i want to make a spool file of the output of that query....i want to see the SQL query & the output below in the spool file, so it will be easy for me to judge the result. But i can't see the SQL query , i can only see the output , & in so many queries it all gets jumbled up....even i can't understand where the next output starts ...
Sample of my SQL Script ....
clear buffer
spool D:\DB_status.txt
/*To check the database startup time*/
Select to_char(startup_time, 'HH24:MI DD-MON-YY') "Startup time"
from v$instance
.........next query n so on....
spool off;
In the output pf the spool file at D:\db_status.txt..
Startup time
08:25 16-JUL-10It shows only the output of the query in the spool file not the query,
What should i do to get the SQL query as well as the output of that query just below it in the spool file ???
Please suggest if you have anymore ideas , regarding this .....
ORACLE 10g R2
Windows Server 2008
Thanks in advance ...

Why don't you just use database control, instead of re-inventing the wheel?
Apart from that, SQL*Plus has it's own reference manual, which you apparently refuse to read.
The answer to your quiz/doc question is
set echo on
Sybrand Bakker
Senior Oracle DBA

How can I reverse the space assigned to UEFI to a primary drive which was shrunk?

Hi,
I had this layout of internal local hard disk:
C(O.S), D(all user accounts data), G(Personal Recovery partition).
I have moved all Newly and current Windows user account profile folders from C into D.
When I have installed HP System diagnostic (HP) Unified Extensible Firmware Interface (UEFI) (Version 4.1.00), I was asked there was no sufficient space to create this partition, and then I was asked if I want to shrink primary partition (Which is D and not C since current Windows user account is on D) to create new partition for UEFI(HP Tools).
I've agreed, and then the partition was created with a size of about 2GB, and the label 'HP tools'.
Layout of my disk before installing installing HP System diagnostic (HP Unified Extensible Firmware Interface (UEFI):
Layout of my disk after Insallinng HP System Diagnositc(HP Unified Extensible Firmware Interface (UEFI).
if you have a close look at my layout before installing UEFI, you will be seeing that 353GB free of 359GB for D drive.
However, if you have a look at my layout after installing UEFI, you will be seeing that 351GB free of 357Gb, which mean that D was shrunk with about 2GB used for UEFI.
My question is if I want now to reverse the 2GB to the D partition of which 2GB was shrunk, Then by only using a 3th-party partitioning software, I will need to first delete HP tools partition to an unallocated space, and then I will delete G partition(labeled with Recovery partition). After that, I will shrink 2GB from all unallcoated space, and merge it to D. Finally, I'll partition the remained unallocated space to be a G partition(Recovery partition).

CherylG wrote:
You should be able to delete the HP Tools partition and add the space back to C. My point was that the Recovery partition function probably is broken & useless now. So why not add it to C? The HP Tools partition can be useful at times for diagnosing hardware, recovering from a bad BIOS flash.etc. ..using only 2gb of space.
Thanks a lot, it could NOT be reveresed 'merged' to C, since Installing 'HP tools' will always be adjacent to the partition from which it will be shrunk. In my case, it is D since I moved all accounts to D:
NB: Installing HP Unified Extensible Firmware Interface (UEFI) will ask to shrink the primary partition where 'Existing user account' is now located if there is no sufficient space to create this partition. As a result, the partition 'HP tools' created by installing 'UEFI' would be adjacent to primary partition from which it was shrunk. In my case, it is 'D' .
Thus, if you want to reverse the space assigned to the UEFI partition, then you can simply merge 'the neighboring partitions 'D' and the letter assigned to the HP Tools.

Can we reverse the category axis in Design Studio 1.3 column charts?

Hi All,
In WebI, there is an option to reverse the category axis for charts.
Do we have something similar in Design Studio? I have a requirement to reverse the order in which labels are appearing in the chart.
Please do help.
Thanks in advance for your response,
Sarah

Sarah,
You can go to Edit > Initial View and change the sort.
Would this work for you?

I need to replace the dvd drive in my touchsmart iq505. where can i buy the part?

I am having trouble finding the replacement part for my touchsmart iq505 dvd drive. the original one is no longer working. is this part still being made or can i replace it with something more recent? thanks!
This question was solved.
View Solution.

Hello clevermom,
I understand you are looking to replace the optical drive in your HP TouchSmart IQ504 Desktop PC. The optical drive you are looking for is no longer supplied by HP, but I do have information that will allow you to get it elsewhere. The optical drive is "8X SuperMulti Slimslot SATA interface DVD-ROM optical drive - Form factor 12.7mm height, read all CD-ROM medai and DVD-RAM discs", and I have fouhd several available on the internet by searching by the Part Number 467613-ZH1.
I hope I have answered your question to your satisfaction. Thank you for posting this question on the HP Forums. Enjoy your weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How can I reverse the posting generated by MF47 or COGI?

Hi,
Using transaction MF47 I have generated a posting document. But when I ran MF47 I did it with the wrong posting date, so the accounting document generated by transaction MF47 has the wrong posting date. I would like to reverse the document generated by MF47 in order to run MF47 afterwards with the correct posting date. Is it possible? I have try to reverse it using MF41 but I do not see the document generated by MF47 in order to reverse it.
Thank you very much,
Ariana

Hi,
It is not possible to reverse the MF47 entry or COGI entry. Once it is cleared means that's all. May be you can try with cancelling the material document and once again you can try with the backflush. But this will not create any COGI entries reversal or MF47 entries reversal.
Regards,
V. Suresh

Can I find the part numbers for the output drivers on the PCI-6534 Card?

We are planning to use an NI-6534 card to test very sensitive hardware. The DAQ will simulate the interface to which this particular piece of hardware will be connected.
Our concern is that there is some way that we can damage our hardware during test.
The best way to insure that this is not a concern would be to say that the DAQ interfaces to our hardware in the exact same way as our real interface. This of course is not likely, so we need to understand the differences. To do this I think we need to compare the I/O spec of the devices directly connected to our hardware under test on both the DAQ and our interface.
Of course we need to know the part number of the NI I/O output drivers.
The kind of data I think we are interested in is:
Voh, Vol, Ioh, Iol, and transition times...
Thank you for any help you can provide.

Hi goldbach,
The other specification you were looking for, slew rate, is typically between 2.75 and 4.5 ns depending on your load. The following knowledge base discusses briefly on this point.
DIO-32HS (6533) Cabling Issues
http://digital.ni.com/public.nsf/websearch/783D15B155FAC6F1862566B3006A32F0?OpenDocument
Hope that helps. Have a good day.
Ron

HT4972 Can I reverse the update as I did not do a back up before updating? I haven't yet done a restore, but my iPad is asking to be plugged in to iTunes.

I allowed the iPad to update its ios5 and the next message was to plug into itunes. My computer is asking me to restore it to my original settings, which I assume will erase everything on the ipad. Can I cancel this and revert to previous settings and not update? I haven't synced the two for a while as most of my data is in icloud, but I don't want to lose anything.

you cannot reverse the update.
if you upgrade to ios 5 then all your settings are removed.
most of my data is in icloud
as you stated then you must have a cloud backup. if you do then you can restore from that.

CIN problem: Can't reverse the PART 2 postings

Similar Messages

Maybe you are looking for