CIN-Two Export scenarios-Duty not paid & Duty Paid

Hello SAP SD CINers,
I have a basic requirement which is that one industry exports without duty paid (which is always the case) and other duty paid which means in the Billing document & the Export Excise Invoice the Price will be statistical but the Taxes like JEXP (IN: A/R BED %) will be accounted for.
The solution as formulated by us is that we have a new series created and then all seems right but the problem here is that it is very very difficult to get a new series from Customs for different busines scenario as normally only two are sanctioned like Home consumption and for Exports.A new Shipping Point be created specially for this scenario which can then be maintained in the Excise/Series group determination but the problem here is that one needs a new Series Group to be maintained which should have utilization not clicked as normally for exports it is ticked off for no utilization but here we need to carry out utilization.Hence, the requirement for a new Series is generated.This is very difficult to convince the Authorities to sanction a new series grouop as this is normally not done.
Could you CIN masters suggest something for this.
In Std SAP, we can have two order types for e.g. OR & RE to have the same No. range int. assignment which will cause the number maintained to find the next available number for both OR as well as RE..OR can have number "1" and RE can have number "2" & so on and so forth.Duplications dont happen here but in case of CIN Excise Invoices, this happens if we shift between Series "EX" (for export) & new Series say "S1" both of which have Object " J_1IEXCEXP" have same from -to numbers.
This problem can be easily be solved by making the changes in the source code which allows this two series groups to have the same number range and the numbers shouldn't get duplicated and the sytem should take in next available number just as this is done for Sales Orders.But that is a change, so we would request for some solution within the existing setup.
I am sure this problem must arise with almost all Indian export factories so there must be some workaround for this problem.
Kindly advice as this is very challenging scenario.In case of further queries, kindly send query for this & i will be looking forward to valuable inputs from you all regarding this.
Thanks All in advance.
Regards,
Dinesh Relwani.

Similar Messages

Excise Duty Not to be Collected from Customer

Dear All,
I require help in a scenario, wherein company has already paid excise duty
to produce the goods but does not collect it from the customer for any
footwear pair which has been priced less than 250 Rs.
The company wants excise to appear in the sales invoice so that excise
invoice can be captured.
Require your suggestion in configuring this scenario.
Thanks and Regards
Adithya

You have not indicated what will happen if the price is above INR 250.00.
If the requirement is excise should not be collected only if the value is below INR 250.00, then, through standard it is not possible. Through exit you can control this. On the other hand, if you dont want to debit the customer for excise duty irrespective of invoice value, then set the excise condition type as statistical, so that excise invoice can also be generated.
G. Lakshmipathi

Subcontrcating Po with paid duty

Hello,
Subcontrcating Po with paid duty
When created the PO with Account assignment category"Q" and Item category"L" subcontrcating PO.
While Supllying the components to suncontrcating vendor.After GI system generates the Mat Doc number.
With ref to mat doc number iam creating the J1IS... system is not proposing the BEd and any values....
We are nit maintaing the material assessable values bcz this PO is Project stock PO.
regrads
mahesh

Hi,
There in J1IS screen, select the line item and click on "Get Excise Invoice" button and select the Excise Invoice against which materials were procured and then check it will adopt Excise Duties Value from that Excise Invoice.

Excise duty not capured..?

Hi gurus
Can anybody giv some inputs..
I hav recd goods, excise duty not capured thru J1IEX, material was consumed,
In this case how can i capture the excise duty after MIGO..?
Please explain me some inputs..?
Thanks
sap-mm

Hi,
You can pass JV with transaction code J1IH by selecting "additional excise' tab.you can give the amounts and also excise invoice number
regards.
prasad

Excise Duty Not appering in GR

Dear all ,
Excise Duty Not appering in GRn for PO ,what may be the possible reasons ?
Pl guide

Hi,
Pls check the J1ID
1. Material maintained in J1ID for that plant
2. Input and output material declared for the plant
3. Vendor excise maintained
4. Excise indictaor for the vendor maintained
5. Plant excise details maintained in J1ID

I have subscribed to Adobe Export PDF for one year and paid the fee per my credit card. I just received an sms to inform me of the amount of R230.61 was deducted today by Adobe Systems Software. I did not request to renew for another year.

I have subscribed to Adobe Export PDF for one year and paid the fee per my credit card. I just received an sms to inform me of the amount of R230.61 was deducted today by Adobe Systems Software. If you have charged for another year, please cancel that service and refund me as I did not request renewal for another year. I don't find this service very useful as documents converted to Word is not really usable when trying to do changes and amendments to the document.
Please confirm.
Regards
Esther Grove
082-334-6786
Email: [email protected]@

Hi,
I have cancelled your Export PDF subscription for the order no.AD001162465AP..
Your refund no.is 66181102.
You will get the refund in 7 business days.
Regards,
Florence

Re-Export Scenario in India

Hi,
Just need your inputs on the above scenario, pls find details below:
Scenario goes like this:
1.Received goods from Vendor, Customs duty is paid for Import.
2.Found Faulty, need to return to vendor.
3.In India, eventhough it is faulty items for export we need to pay excise and cess. Pls note that additional customs duty paid should be reversed in this flow.
4.We need to follow the sales flow instead of return PO, returns delivery etc.,due to some number range issues specific to India.
Kindly Suggest me how this Re export scenario can be handled thru' sales flow
Best Regards,
Vaidheeswaran.A

1. Create the Vendor as a Customer.
2. Follow the Normal Export Sales Process.
3. In India, CIN can be configured as with payment of duty or without payment of duty. If ARE1 is con confirmed & closed in the specified period, only then Excise Duty is liable.
Export Sale Scenario:
http://help.sap.com/bp_bblibrary/500/html/J91_ExportSaleundBond_EN_IN.htm
Regards,
Rajesh Banka
Reward points if helpful.

Difference between Additional Excise duty and Additional Duty on imports

Dear All,
I want to know the difference between additional excise duty on domestic procurement and additional duty on imported material, mainly in context of the credit availing. How much credit we can avail if we procure a capital material (domestic and imported).
Regards,
Ashish

Dear,
Excise duty is a duty on production or manufacture of goods, It is levied on manufacture of goods and the liability to pay excise duty arises immediately on manufacture or production of goods.
Additional duty is levied as per custom tarff act and is equal to excise duty levied on a LIKE product manufactured or produced in India.
Sometimes, foreign sellers abroad may export to India goods at below the amounts charged by them in their domestic markets in order to capture Indian markets to the detriment of Indian Industry.
Please check: http://help.sap.com/bp_bblibrary/600/html/J84_EN_IN.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?quicklink=index&overridelayout=true
Regards,
Syed Hussain.

Single invoice for multiple deliveries in Export scenario

Hi All
I am trying to create a single invoice for multiple deliveries. In case of Local Sales i am able to do it.
But when it comes to export sales the system is not allowing me to create Single invoice for 2 deliveries . This is a export scenario. Can you suggest... When i am checking the split invoice log it says split due to header data "Number of foreign trade data i"
Plz suggest.
Thanks
Rishi

Thanks G. Lakshmipathi
Resolved
As per the split analysis, System was checking the number generated for Foreign Trade data at delivery level.
As told i have Tried maintaining the Indication at copy control level VTFL "Redetermination of Foreign Trade Data at Billing level".
This has resolved my Issue.
Thanks Again
Rishi

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Export error: Writer not found

Hello,
I am using PPCS3 with Aspect HD.
I am using the Cineform HD 30p preset.
I keep getting an export error: writer not found
when I try to export a short movie using two uncompressed .avi's I obtained from 3DS Max 2009.
Any ideas what "Writer not found" means.
Simon

Have you installed anything CS4 at all? Even a public beta of Soundbooth or some other non-Premiere component?
I never did find out what I installed that trashed .wmv export for me in Pr CS3 on my old XP system. Maybe it was the beta of Sb or maybe it was the free stand-alone Microsoft Windows Media Encoder.
Anyway, a full uninstall and reinstall of CS3 will likely fix the problem, but I can't say for sure because I never got around to doing it. I used the MS Windows Media Encoder until I could load CS3 on my new system (dual-boot XP32 with Vista64).
EDIT: All is well with .wmv export on the new system. No CS4 on XP32 and no WME there, either.

Export scenarios from XI and import them into PI

Dear experts
We are planning to upgrade our exitsting XI 3.0 to PI7.0.
Due to system requeriments, we need to install PI on new hardware and migrate all the existing scenario's from XI 3.0 PI7.'0
How to migrate the existing ABAP developements from XI to PI ?
It's possible to export scenarios from XI and import them into PI?
Thanks, in advance
Carme

Hi,
you should go to PI 7.1 and not PI 7.0 otherwise it makes not so much sense.
And yes it's possible to migrate your scenarios. If you have UDFs you have to check them because the java version has changed.
Regards
Patrick

How to determin one SO/DO is in Export process or not?

Hi,
One of our requirement is to send the picking request IDOC to warehouse, if it is in case of export, then specific data will be sent in the picking request IDOC. So we need identify whether the processing order is in Export process or not?
As customer decide not to use an specific sales document type for Export order.
So we could do like this way:
Check the country of ship-to-party with the country of the delivering plant and then determine if it is exports or not.
And our abap team want me to provide the details logic on this in field level.
My questions:
Please tell me which field is the correct field for 'Delivering plant'...Is it the one located in Delivery order-item level or others??? Or even the deliverying plant in material master data??
Then i check the plant master data table for picking up the country key.
Could you please help me by providing some inputs, thanks.
Would be great if you also could provide some table fields..for example: table name of plant master/table name of customer master data..etc
Thanks.

Hi Prase,
According to your experience, if we want to identify an order whehter it is Export or not, as I should check the ship-to party and delivering plant from delivery order or sales order ???
My scenario is to send picking request IDOC to warehouse upon delivery creation , and in IDOC filling FM, we need the logic to determine the export process then decide corresponding segments being filled.
But i dont know in above case, whether i need check those plant from sales order level or delivery order level??
For example:
For checking delivering plant code, then i need check from VBAP-WERKS(Sales order lvl) or LIPS-WERKS(Delivery level)??
Then i will check the country key accordingly from T001w and KNA1.
Thanks.
Edited by: Hoo Laa on Dec 23, 2008 12:20 PM

Message: cannot import xml, even after exporting using file, export, xml, and not touching the file

I need to change the messages for a different language. Has anyone been able to set this XML file to import? Some of the content is in Norwegian, but don't how that will affect it. But it will not import a file, even if it was just exported.

Hi Patrick,
I tried few import/export scenarios in captivate 7 and it works fine for me. I think it will be a good idea if you can mail me the .xml file along with steps to reproduce the issue.
My email id is [email protected]
-Tamish

Calling csv export from button not link?

Gday,
I was wondering if it is possible to call the export csv functionality via a button and the default hyperlink functionality?
Cheers

Hi,
You actually need to mess with two templates - the region one and a new button one.
Firstly, update the report's region template to include the following at the top of the "Template" setting:
<script type="text/javascript">
var regionid="#REGION_ID#"
</script>Note that this must be done on the report's template even if you put your button into another region as we need the report's REGION_ID value
Now create a new Button template called, say, "Export Button". The "Template" setting for this should be:
<a href="javascript:void(0)" class="t12Button" onclick="doExport();">Export</a>This was based on a standard "Button" button template. If you use another style of button, adjust it accordingly - you need the same href and onclick attributes as shown above, but anything else can be left unchanged.
Finally, on the page's HTML Header setting, add in:
<script type="text/javascript">
function doExport()
var url = 'f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_EXCEL_OUTPUT_' + regionid + '_en';
document.location.href=url;
</script>You can now change your button to a Template Based Button using the new Export Button.
Note that, as we are assigning REGION_ID to a javascript variable, only 1 such button can exist on a page.
Andy

CIN-Two Export scenarios-Duty not paid & Duty Paid

Similar Messages

Maybe you are looking for