Cisco 888 VPN performance

Hi all,
Cisco 888 have 4-port 10/100-Mbps managed switch and supports many types of VPN.
But I cann't find VPN performance in Mbps in Cisco documentation.
How much is that for AES256+SHA-1 ?
Thanks

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
See my attachment in my response to your other posting.

Similar Messages

Unable to unistall Cisco AnyConnect VPN - please help

I have upgraded to Windows 8.1 preview on my Surface Pro. My Cisco AnyConnect VPN stopped working. When I uninstalled the software it left the ‘Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64’ under the network adapters in Device Manager. No matter what I do, I cannot uninstall it from there. I tried everything including uninstalling in safe mode. I says it uninstalled but still appears there. I believe because of this, my internet connection performance has decreased tremendously. It also disconnects and reconnects sometime after. My other computers work perfectly with maximum speed.
Please Help.
Thanks,
Mike

Windows Event Log detail as follows:
Faulting application name: vpnagent.exe, version: 3.1.4066.0, time stamp: 0x52211732
Faulting module name: Dbghelp.dll, version: 6.3.9600.16520, time stamp: 0x52e690ac
Exception code: 0xc0000005
Fault offset: 0x00029132
Faulting process id: 0x1e74
Faulting application start time: 0x01d02328f37bd890
Faulting application path: C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpnagent.exe
Faulting module path: C:\Windows\SYSTEM32\Dbghelp.dll
Report Id: 31beb6d1-8f1c-11e4-8278-54271ebdf9a6
Faulting package full name:
Faulting package-relative application ID:

Help with Cisco RV180 VPN

I have installed the Cisco RV180 VPN at a customer location.
Because this customer makes credit card transactions over the Internet, their merchant account requires a third-party to perform a security scan on the gateway. When scanning, the third-party states they are not in compliance with this report:
THREAT REFERENCE
Summary:
TLS Protocol Session Renegotiation Security Vulnerability
Risk: High (3)
Port: 443
Protocol: TCP
Threat ID: misc_opensslrenegotiation
Details: Multiple Vendor TLS Protocol Session Renegotiation Security Vulnerability
06/11/12
CVE 2009-3555
Multiple vendors TLS protocol implementations are prone to a security vulnerability related to the session-renegotiation process which allows man-in-the-middle attackers to insert data into HTTPS sessions, and possibly other types of sessions protected by TLS or SSL, by sending an unauthenticated request that is processed retroactively by a server in a post-renegotiation context.
Information From Target:
Service: 443:TCP
Session Renegotiation succeeded on 443:TCP
They are using the QuickVPN Client to connect and must be able to connect from anywhere in the world. From my understanding, port 443 must be opened for the QuickVPN Client to function. How do I block port 443 from everyone except the QuickVPN Client? Or how do I configure the RV180 to satisfy the above threat?
Thanks in advance for any information you can provide.

Hi,
following config is for cisco VPN client access with dynamic allocation and split-tunnel.
Hope this helps, please rate post if it does!
aaa new-model
aaa authentication login userauthen local
aaa authorization network groupauthor local
username vpnc password 0 userpass
crypto isakmp client configuration group vpncg
key grouppass
dns 4.2.2.1
wins 10.59.2.10
domain domain.com
pool ip-pool
acl 108
crypto ipsec transform-set myset esp-aes esp-sha-hmac
crypto dynamic-map dynmap 10
set transform-set myset
crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
interface FastEthernet0/0
ip nat outside
crypto map clientmap
interface vlan1
ip address 10.59.2.1 255.255.255.0
ip nat inside
ip local pool ip-pool 10.0.230.1 10.0.230.20
access-list 108 remark VPN client split tunnel
access-list 108 permit ip 10.59.2.0 0.0.0.255 10.0.230.0 0.0.0.255

Cisco IPSec VPN Client and sending a specific Radius A-V value to ACS 5.2

This setup is to try routing Cisco VPN to either RSA or Entrust from Cisco ACS 5.2, depending on some parameter in incoming AUTH request from Cisco IPSec VPN Client 5.x. Tried playing with pcf files and user names/identity stores, none seems working

Hi Tony,
to the best of my knowledge this is currently not possible, but will be once this enhancement is implemented:
CSCsw31922 Radius upstream VSAs (Tunnel Group,Client type) for VPN policy decisions
You may want to try and ask in the AAA forum if there is anything you can do on ACS...
hth
Herbert

Cisco IPSEC VPN not working after upgrade to Mavericks

I have been using the Cisco IPSEC VPN for almost 2 years with no issues. When I upgraded to Mavericks this week it stopped working. When i tell it to connect it prompts for password and attempts to connect for about 30 seconds then comes back with the following message...
VPN Connection
The negotiation with the VPN server failed. Verify the server address and try reconnecting.
The address, group, shared secret, user and password are correct. Any help would be greatly appreiated.

Hry, I'm not sure if this fixes the Cisco IPSec issue, but I can vouch for it fixing the L2TP issue that occurs after tha mavericks upgrade!
I’ve got L2TP VPN working in Mavericks 10.9 and Server App 3.0.0 / 3.0.1.
It really is quite a simple fix.
Obviously, the standard caveats apply: This is a temporary, unsupported, workaround, and only a suggested idea at that. Again, this workaround is NOT supported by Apple.
Proceed with this workaround on your own equipment at your own risk. And remember the golden rule: Always backup your data!
OK so here goes… copy and paste the following into termini ONE LINE AT A TIME!
cd /tmp
curl -sO http://c5mart.co/mavericks-vpn-fix/racoon.tar.gz
tar -xzvf racoon.tar.gz
rm racoon.tar.gz
sudo chown root:wheel racoon
sudo chmod 555 racoon
if [ ! -f /usr/sbin/racoon.mavericks ]; then sudo mv /usr/sbin/racoon /usr/sbin/racoon.mavericks; fi;
sudo mv racoon /usr/sbin/racoon
sudo killall racoon
This works fine for me and I'm running a OSX Server for my entire office.
…et voilà!

Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !

Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again

Profile for Cisco IPsec VPN does not set shared secret correctly

Hi,
We have a shared secret configuration for a Cisco IPsec (connecting to an ASA). I can correctly configure a profile for the Cisco IPsec VPN and deliver it to the device. However, the VPN connection fails due to an invalid shared secret. If I then go into the VPN settings on the device itself and manually retype the shared secret, it works fine.
I have noticed this when generating the mobileconfig profile both from Apple's iPhone Configuration Utility and also when using the MobileIron management platform to generate and push profiles.
Has anyone else seen this problem? I'm really confident that I'm typing the shared secret correctly in the iPCU generated profile as I've tried it many times. It also has happened across every flavor of iOS 3.x and 4.x (including the 4.2 betas).
thanks

Hi,
Thanks for the reply but it is a bit of a strange one. What makes you think the shared secret we are using - which you don't know - is more than 32 characters long. I can promise you it isn't. There's a bug in the way mobileconfig files are storing the encrypted shared secret values. I've now seen it on a third party mobile device management platform too.

Browsing Oracle application using CISCO SSL VPN forms not opening

Hi all,
Any idea why am not able to access my application using CISCO SSL VPN.Normal clients are able to use our application there is no problem.i have modifyed the "certdb.txt",still i am having the same problem.here am attaching the Java console output.
java.net.ConnectException: Operation timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
     at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
     at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
     at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
     at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
     at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
     at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache https://212.72.22.86/+CSCO+1a756767633A2F2F62656E6A726F322E7A75712E70622E627A++/forms/java/frmwebutil.jar
java.net.ConnectException: Operation timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
     at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
     at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
     at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
     at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
     at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
     at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
     at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache https://212.72.22.86/+CSCO+1a756767633A2F2F62656E6A726F322E7A75712E70622E627A++/forms/java/frmall_jinit.jar
java.net.ConnectException: Operation timed out: connect

Hi,
From your description, my understanding is that you get invalid workflowinstanceid error when you click on workflow link like "inprogress” in the current list.
Please check the URL of workflow “inprogress” (also URL for workflow approval instance to open task form) to see if it’s correct.
Please use your company network directly instead of CISCO SSL VPN, then access SharePoint portal url “https://vpnssl.companyname.com/”, see if the issue still occur.
Also, check the ULS log on the SharePoint server based on the Correlation ID value, get more detailed information about this error message.
And you could refer to this similar issue:
https://social.technet.microsoft.com/Forums/en-US/08aa6b33-cef6-4b01-8af7-6c25ed7d9953/invalid-workflowinstanceid-parameter-in-url?forum=sharepointgeneralprevious.
Best Regards
Vincent Han
TechNet Community Support

Need Help Setup Cisco RV042 vpn

good day everyone, a month ago my boss purchase 4 pcs cisco rv042 vpn to be used in our small office and to our satelite office, with expectations of simple file sharing and remote troubleshooting and for better and safe data transfer. since the task is given to me as an IT staff it is difficult to me to setup this vpn router since i have a little idea and many question are on my mind that need to be answered, i read the manual test the vpn router but still no good answered found. i know it is dufficult but with proper guide and step by step on how to use this one i can make it work. please anyone help me i need answers to this questions.
i am using windows 7 pro sp1 64bit for my test unit, how can i make a vpn server? a client?
in the past i connect the internet connection in the internet connection port in the back of the router, then another cable from vpn port 1-4 i select #4 port to connect to my pc, since the vpn give the ip on my pc i can easily connect to the firmware of the vpn using the deafault username and password. when i go to the firmware i dont know where to start, and i dont even have the internet connection for my pc.
i feel sorry for myself beacuse i have no idea in this kind of thing, CISCO people and others out there i am calling for your help.
thank you in advance
mel

Dear Emilio,
Thank you for reaching Cisco Small Business Support Community.
If you’d like to setup a Site to Site VPN on your RV042 here is a good step by step guide;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=304
If you are looking into a remote access VPN, QuickVPN, here is the step by step procedure;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=452
Just in case here is also a document with Windows operating systems tips;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2922
Finally here is a link with the Admin Guide where starting on page 122 you can find everything related to VPN setup on this particular device model, beside info in how to setup your internal network (I suggest you to go through this admin guide so you know everything about the router);
http://www.cisco.com/en/US/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG_78-19576.pdf
Please let me know if there is any further assistance we may assist you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Cisco RV042 VPN unable to connect to Netgear PS FVS318

Hello,
We recently replaced one of two Netgear ProSafe VPN FVS318 with a Cisco RV042 VPN. Both Netgear were configured site-site and was working fine until one of them failed. We copied as much configuration settings from the failed Netgear PS to the RV042 but were unsuccessful in establishing a connection between the two sites.
The logs on the Cisco router shows this:
VPN Log packet from 1.1.1.1:500: received Vendor ID payload [RFC 3947]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
VPN Log packet from 1.1.1.1:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
VPN Log packet from 1.1.1.1:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
VPN Log packet from 1.1.1.1:500: initial Main Mode message received on 2.2.2.2:500 but no connection has been authorized with policy=PSK
Each time we select a tunnel test connect, that last message appears with "but no connection has been authorized with policy=PSK"
*replaced actual IP with sample IP.
Any ideas why this is happening?
Thank you!

Hello,
It looks as RV042 receive phase 1 configuration from Netgear, but due to mismatch with it's phase 1 settings does not reply back.
I can't be more specific as this could be anything in phase 1 - aggressive/main mode; the WAN IP addresses, encryption or SA lifetime. As well if any of the devices is behind NAT, the option NAT traversal should be checked.
Regards,
Kremena

Configurate cisco ipsec vpn client at asa 5505 version 8.4

Hi dear. I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4.
please provide me a link or some material to config ipsec vpn client at asa 5505 version 8.4
thank you.

are you looking for vpn client .pcf file or the configuration on ASA (ASDM) ?
what version of vpn client ?

Cisco AnyConnect VPN app on iPhone 4s won't connect

I have successfully installed the Cisco AnyConnect VPN app on my iPad Air and can connect to my target VPN. But the same app on my iPhone 4s won't work. When I try to connect I get this message: "Connect using Cisco AnyConnect App at least once before using any other App." I'm not trying to use another app, in fact I closed all other apps. I'm using the same settings as the Air. I tried with wi-fi, turned wi-fi off, location services on and off, etc. I'm on Verizon.
Has anyone got this to work on an iPhone?
Thanks

Although I agree that this is really a question for Cisco, finding/receiving an official answer there may take a while.
This app worked fine for me until I upgraded today - June 19, 2014 - the date of the release of Version 3.0.09430. After upgrade, I get the same message. The update note says "Apple IOS Connect On Demand Considerations - To ensure proper establish of Connect On Demand VPN tunnels after updating AnyConnect, users must manually start the Any Connect app and establish a connection. If this is not done, upon the next iOS system attempt to establish a VPN tunnel, the error message 'The VPN Connection requires an application to start up' will display."
But I too have tried various interpretations of that, and still get the error above quoted by azmilt.
It appears that either:
- the upgrade is faulty
- the version itself is faulty
- the directions for a proper upgrade need clarification
So if anyone has upgraded to this version, and made it work, I think that providing a procedure would help the community.

Cisco Systems VPN Client Version 5.0.03.0560 Errors

Hello I am getting the following errors on my
VPN Connection Attempts
Cisco Systems VPN Client Version 5.0.03.0560
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 3
Config file directory: C:\Program Files\Cisco Systems\VPN Client\
1      19:59:14.375 09/26/10 Sev=Warning/3 CVPND/0xA340000D
The virtual adapter was not recognized by the operating system.
2      19:59:14.375 09/26/10 Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable
3      19:59:14.531 09/26/10 Sev=Warning/2 IKE/0xE300009B
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
4      19:59:14.531 09/26/10 Sev=Warning/2 IKE/0xE30000A7
Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2238)

Please kindly check the following readme for VPN Client version 5.0.3.560:
http://www.cisco.com/web/software/282364316/22941/vpnclient-windows-5.0.03.0560.txt
Advisory:
The new client requires a kernel patch, KB952876, from Microsoft before installing first before installing the actual client.
REF: http://support.microsoft.com/kb/952876/en-us
Pls kindly check if you have kernel patch KB952876

Cisco Systems VPN Driver installed without my authorization

I just did a system software update, installing just the Security Update 2010-004. After rebooting I looked in the syslog and noticed for the first time a report of starting a Cisco Systems VPN driver:
Wed Jul 21 14:03:59 mhackslab kernel[0] <Debug>: yukon: Ethernet address 00:1b:63:be:3c:6e
Wed Jul 21 14:04:01 mhackslab rpc.statd[70] <Notice>: statd.notify - no notifications needed
Wed Jul 21 14:04:01 mhackslab bootlog[85] <Notice>: BOOT_TIME: 1279742620 0
Wed Jul 21 14:04:02 mhackslab com.apple.launchd[1] (com.apple.distccdConfigd[81]) <Warning>: Exited with exit code: 255
Wed Jul 21 14:04:02 mhackslab fseventsd[77] <Critical>: bumping event counter to: 0x2bdc081c (current 0x0) from log file
Wed Jul 21 14:04:12 mhackslab kextd[17] <Notice>: writing kernel link data to /var/run/mach.sym
Wed Jul 21 14:04:12 mhackslab /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[73] <Error>: Login
Wed Jul 21 14:04:13 mhackslab /usr/sbin/ocspd[104] <Alert>: starting
Wed Jul 21 14:04:13 mhackslab com.apple.SystemStarter[68] <Notice>: Starting Cisco Systems VPN Driver
Wed Jul 21 14:04:14 mhackslab com.apple.SystemStarter[68] <Notice>: kextload: /System/Library/Extensions/CiscoVPN.kext l
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : attempting to attach to all available ethernet interfaces.
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : checking if we are already attached to interface: en0
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : no, not yet attached to interface: en0
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : interface: en0, filter attached.
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : current MTU for en0 is 1500, saving it.
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : checking if we are already attached to interface: en1
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : no, not yet attached to interface: en1
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : interface: en1, filter attached.
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : current MTU for en1 is 1500, saving it.
Wed Jul 21 14:04:15 mhackslab kernel[0] <Debug>: CiscoVPN : loading cisco ipsec kernel module.
Wed Jul 21 14:04:21 mhackslab kernel[0] <Debug>: display: Not usable
My syslog goes back over a year and there is no prior report of such a driver being started. I don't think I have ever manually installed this driver. I have also listed all services by doing 'sudo launchctl list' and 'sudo launchctl bslist' and did not see any report of a Cisco service.
I would like to know why the driver is now being started every time on bootup, what caused this to occur, and how I can prevent it.
thanks,
William Knight

Hi,
I suggest you to install the Latest Version of Cisco VPN 5.0.07.0440 : http://software.cisco.com/download/release.html?mdfid=281940730&softwareid=282364316&release=5.0.07.0440&os=Windows
if you get the same Error try to turn off the Firewall and Connect again, if doesn't solve it you should contact with Cisco VPN Support: https://supportforums.cisco.com/community/netpro/security/vpn
Regards,
MCT / MCITP / MCTS / MCSA / MCSE / MCP / C|EH / CCNA

Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN

Dear All,
i have the folloing case :
i am using ASA as Certificate authority for cisco anyconnect VPN users,the authentication happens based on the local database of the ASA,
i want to issue a new certificate every 72 hours for the users ,and i want to send the one time password via email to each user.
so what the setting of the mail and smtp server should be ,
was i understand i should put my smtp server ip address then i have to create the local users again under(Remte VPN VPN--Certificate management--Local certificate authority --Manage user Database) along with their email addresses to send the one time passsword to them via their emails.
i sent the email manually ,hwo can automate sending the OTP to our VPN users automatically vi their emails?
Best regards,

Thanks Jennifer.
I did manage to configure LDAP attribute map to the specific group policy.
Nevertheless, I was thinking whether I can have fixed IP address tied to individual user.
Using legacy Cisco VPN Client, I can do it using IPSEC(IKEv1) Connection profile, where I set Pre-Shared Key and Client Address Pools. Each Client Address Pools has only 1 fix IP address.
Example: let say my username is LLH.
Connection Profile for me is : LLH-Connection-Profile, my profile is protected by preshared key.
Client Address Pool for me is : LLH-pool, and the IP is 172.16.1.11
Only me know the preshared key and only me can login with my Connection Profile.
Using AnyConnect, I have problem. User can use any connection profile because I cannot set preshared key for AnyConnect. In that case, I cannot control who can use my Connection Profile and pretend to be me.
Example:
AnyConnect Connection Profile for me is : LLH-Connection-Profile, without any password
Client Address Pool for me is : LLH-pool, IP is 172.16.1.11
Any body can use LLH-Connection-Profile, login with another user name, let say user-abc which is a valid user in LDAP server. In that case, ASA assign 172.16.1.11 to user-abc and this user-abc can access server which only allow my IP to access.
I hope above description can paint the scenario clearer.
Thanks in advance for all the help and comment given.

Cisco 888 VPN performance

Similar Messages

Maybe you are looking for