Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOA

Can anyone help figure out why the Catalyst 6509 is not able to assign an IPv6 address? Thank you.
Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOADDRS-AVAIL(2). My configuration on the 6500 for the DHCPv6 server is:
ipv6 dhcp database disk0://DHCPV6-DB
ipv6 dhcp pool VLAN206IPV6
prefix-delegation pool VLAN206IPV6-POOL
dns-server 2620:B700:0:1001::53
domain-name global.bio.com
ipv6 local pool VLAN206IPV6-POOL 2620:B700:0:12C7::/65 65
interface Vlan206
description *** IPv6 Subnet ***
ip address 10.2.104.2 255.255.255.0
ipv6 address 2620:B700:0:12C7::2/64
ipv6 nd prefix 2620:B700:0:12C7::/64 14400 14400 no-autoconfig
ipv6 nd managed-config-flag
ipv6 dhcp server VLAN206IPV6
standby version 2
standby 0 ip 10.2.104.1
standby 0 preempt
standby 6 ipv6 2620:B700:0:12C7::1/64
standby 6 preempt
I'm getting a result from my debug as follows:
Apr 10 16:28:02.873 PDT: %LINK-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.873 PDT: %LINK-SP-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.877 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Received SOLICIT from FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: dst FF02::1:2
Apr 10 16:28:03.861 PDT: type SOLICIT(1), xid 8277025
Apr 10 16:28:03.861 PDT: option ELAPSED-TIME(8), len 2
Apr 10 16:28:03.861 PDT: elapsed-time 101
Apr 10 16:28:03.861 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.861 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.861 PDT: option IA-NA(3), len 12
Apr 10 16:28:03.861 PDT: IAID 0x0FF01FAF, T1 0, T2 0
Apr 10 16:28:03.861 PDT: option UNKNOWN(39), len 32
Apr 10 16:28:03.861 PDT: option VENDOR-CLASS(16), len 14
Apr 10 16:28:03.861 PDT: option ORO(6), len 8
Apr 10 16:28:03.861 PDT: DOMAIN-LIST,DNS-SERVERS,VENDOR-OPTS,UNKNOWN
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Option IA-NA(3) is not supported yet
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Sending ADVERTISE to FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::21D:E6FF:FEE4:4400
Apr 10 16:28:03.861 PDT: dst FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: type ADVERTISE(2), xid 8277025
Apr 10 16:28:03.861 PDT: option SERVERID(2), len 10
Apr 10 16:28:03.865 PDT: 00030001001DE6E44400
Apr 10 16:28:03.865 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.865 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.865 PDT: option STATUS-CODE(13), len 15
Apr 10 16:28:03.865 PDT: status code NOADDRS-AVAIL(2)
Apr 10 16:28:03.865 PDT: status message: NOADDRS-AVAIL

Hello,
maybe hitting the following bug.
Pv6 Address Assignment Support for IPv6 DHCP Server
CSCse81385
Hope this helps

Similar Messages

Connection of LC/APC fiber patch cords to Cisco Catalyst 6500 $ Cisco Access 3750 Switches

I have an LC/APC fiber patch cord infrastructure and I want to connect it to Cisco Catalyst 6500 & Cisco Access 3750 Switches. what type of transceiver should be used?
I read a note on Cisco website stating the following for Cisco SFP+ transceivers:
Note: "Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section"

Thank you, but my question is that I have a single mode fiber patch cord with LC/APC connector while cisco stating a note that only use LC/PC or LC/UPC type of connectors with SFP+ transceiver.
So what type of transceiver should I use to connect LC/APC patch cord to cisco switches? Is there another type or SFP+ still can be used?

Installing New network card on a Cisco Catalyst 6500 VSS mode

Hi All.
I need to install a new network card on Cisco Catalyst 6500 VSS mode, I need to follow any special procedures or is it only insert the new card and the Catalyst automatically recognizes the card?
Thank you So mucho.

Hi,
Just insert the blade and the switch should recognize it. For the 6500 series the blades are hot swap able.
HTH

After upgrading ios Cisco Catalyst 6500 Series Supervisor Engine 2T to the latest release the ASA-SM module is not recognized

after upgrading ios Cisco Catalyst 6500 Series Supervisor Engine 2T to the latest release the ASA-SM module is not recognized it is disabled. the FPD
is not recognized any more. reverted back to previous ios with no luck

Duplicate post.
Being discussed actively in this thread.

After upgrading ios Cisco Catalyst 6500 Series Supervisor Engine 2T ASA-SM is disabled

after upgrading ios Cisco Catalyst 6500 Series Supervisor Engine 2T to the latest release the ASA-SM module is not recognized it is disabled. the FPD
is not recognized any more. reverted back to previous ios with no luck

What IOS are you running on your Supervisor 2T? As long as it's 15.0(1)SY1 or later you should be OK. (Reference).
If it's not working with that I'd try reload of the ASA SM module (from IOS cli - e.g. "hw-module <module#> reset" and, failing that, "no power-enable module <module#>" followed by "power-enable module <module#>) while the new Supervisor is installed. Watch the log for relevant messages during that process.

I have InDesign 3 Version 5.0 for Mac. I have a client with a PC who has either InDesign 6 or CC for PC. If I sell him usage rights to my files, will he be able to use them?

I have InDesign 3 Version 5.0 for Mac. I have a client with a PC who has either InDesign 6 or CC for PC. If I sell him usage rights to my files, will he be able to use them?

...but from what I have read general practice is to charge extra for native files as you are giving over usage rights of the artwork.
Not a lawyer, just been around the block before. It all sort of depends on the client and understandings on both your parts, whether in writing or not. What is their expectation while they were paying you? What was your expectation during the same period? In lieu of an agreement, I think the courts would side on the client's rights.
But regardless, I generally do what Peter wrote unless there is an agreement in writing stating otherwise. One of the reasons why I happily turn over client work is because sometimes the new-hire or new contractor simply doesn't work out and I am often called back into the mix. It's goodwill.
Mike

CSM - does it support ACLs on a Cisco Catalyst 6500

Hi,
Does anyone know if CSM Enterprise Standard can be used to manage ACLs (standard and extended) on a Catalyst 6500?
Regards,
Piaras

Hi,
Just insert the blade and the switch should recognize it. For the 6500 series the blades are hot swap able.
HTH

Cisco Catalyst 6500 Supervisor Engine 2T Baseboard

Morning Guys
i have just bought a Cisco 6506-E Chassis, it came out with only the SUP2T Engine on slot 5, i have already stacked 3 switches (3750-X) as my core, i want to replace them with the chassis the problem now is my company doesn't have money to buy the 48 port switch and the fibre switch for the chassis, help me link the SUP2T Engine with the stack and improve my network. i also have the 12 port netgear fibre switch. help with the configuration.

You obviously need to configure the ports etc. but the switch should recognise the module as long as you have an IOS that supports it.
There is nothing extra to do, you just slot the module in.
If you are connecting all your distribution switches to the 6500 then if you don't need a vlan/IP subnet in multiple buildings then you should use L3 connections to the 6500.
Note also that you may want to consider at some time in the future a second supervisor or another chassis as this 6500 with one supervisor is a single point of failure ie. if it goes then there is no communication between buildings.
Jon

DHCP on Cisco Catalyst 2950 Switch

Hello
I need to configure my cisco catalyst 2950 series switch in order to act as DHCP server for devices connected to its ports.
Please say me, how to do that ?
Thank you
Narek

Please find the sample DHCP configuration for one of the VLANs.
Interface Vlan1
description Cisco DHCP
ip address 10.10.2.1 255.255.255.0
ip dhcp pool cisco
network 10.10.2.0 255.255.255.0
default-router 10.10.2.1
domain-name mydomain.com
dns-server 10.10.2.10
netbios-name-server 10.10.2.15
lease 7
A 24 hour lease is the default if left out and the netbios-name-server is WINS in the Windows world.
If you want to use DHCP server for other VLANs as well create similar DHCP pools and assign the DG to the corresponding VLAN interface IP.
HTH, rate if it does
Narayan

Catalyst 6500 Central Fwd Card for WS-X67xx modules ?

Hi ,
I have a BOM of materials that has this part number in it.
WS-F6700-CFC Catalyst 6500 Central Fwd Card for WS-X67xx modules 1
Though on Cisco configurator it doesnt show up. Is this what it should be WS-F6700-DFC3A Cisco Catalyst 6500 Distributed Forwarding Daughter card-3A for 67xx modules
Are they the same ?
thanks
Allan

Allan,
Both the cards are not same. One is the CFC i.e centralized forwarding card and the other is distributed forwarding card. DFC cards downloads the CEF cache tables on them,both the FIB and the adjacency table.
WS-X67xx modules which are sfipped with CFC's are field upgradable to DFC's.
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_module_installation_guide09186a00801d3b60.html#wp59534
regards,
-amit singh

Cisco Catalyst 2960X-48FPD-L Whit SFP+ 10GB

Hello!!
Can i use 10Gb Link between a Cisco Catalyst 6500 whit a Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module (WS-X6908-10G-2T) card and 10GBASE-SR X2 Fiber port, and . And in the other side use a Cisco Catalyst 2960X-48FPD-L (have two SFP+ bays) whit SFP-10G-SR=  (multimode fiber)
this solutions works???
another question:
WS-X6908-10G-2T card   comes equipped with DFC4. What mean that? requiere another slot in a 6500 chassis??
thanks

Hi,
Q1:- yes it should work.
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/data_sheet_c78-648212.html
2)
WS-X6908-10G-2T card   comes equipped with DFC4. What mean that? requiere another slot in a 6500 chassis??
Answer: No DFC4 is the sub-module which would sit on the line card WS-X6908-10G-2T. It doesnt require any spare slot.
WS-X6908-10G-2T: comes equipped with DFC4 for distributed forwarding, supporting 256K forwarding entries, increased ACL entries to 64K, increased Netflow entries to 512K, and increased IPv4 forwarding speed to 60 Mpps
HTH

Cisco 4500/6500 switch

Hello Freinds,
I have two querries:-
1)
a) What would be the effect if one SUP is removed (out of two) from Cisco 4500/6500 series switch.
b) what is the result after removing both SUP from cisco 4500/6500 switch.
++++++++++++++++++++++++++++++++++++
2) PLease share the step wise process for upgrading IOS on 4500 switch (with 2 SUP card).

http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a00801461ef.shtml

Cisco 5508-WLC using MS NPS as RADIUS Server for EAP-TLS

Has anyone experienced a problem getting a Cisco WLC to work with MS NPS server? We've done it before albeit with differnt code versions.
I have a Cisco 5508 WLC running 7.0.116.0 code hosting a WLAN configured for WPA2 with 802.1x for authentication. I have two Windows NPS servers configured as the RADIUS servers for EAP-TLS authentication. Via debug info on the WLC I can see the 802.1x handshake take place with the wireless client and the WLC as well as a successful transmission of an Authentication Packet from the WLC to one of the RADIUS servers. However on the WLC I see repeated RADIUS server x.x.x.x:1812 deactivated in global list and on the NPS server I'm seeing event log errors indicating "The Network Policy Server discarded the request for a user" along with the pertinent auth request info that I would expect the NPS server to receive from the WLC.
Based on the WLC debug info I'm never actually getting to the EAP-TLS certificate authentication part. It seems the NPS servers don't like the format of the initial RADIUS authentication request coming from the WLC and so don't respond whcih in turn casues to WLC to switch to the other NPS server which produces the same issue.
Any ideas of what might be the issue or misconfiguration?

Jim,
I wanted to know if you can setup wireshark on both of the boxes and see if your are hitting the following bug:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCti91044
It looks as if the WLC is retransmitting the client traffic from one radius session with primary over to the secondary in which the radius state attribute that was assigned from the primary server is probably hitting the secondary server. Therefore if the state attribute isnt assigned from the secondary server it will discard the packet.
May need to open a TAC case to see if this issue is on the 550x controllers also.
Thanks,
Tarik

Cisco ACL for Wireless VLAN's

Hi all and Merry Christmas to you.
So I have been off work for a few days now playing in my lab, I have configured a number of VLAN’s to separate Data, Voice, Servers, Games Consoles and Guest on my Cisco 1142, I know it may be a bit of an over kill but it’s just me doing a bit of lab work and learning
What I’m after doing now is setting up ACL’s to deny the Guest and Games Console VLAN from accessing my LAN and I’m not sure where to start, I want to consoles only to be able to connect to PSN and Xbox networks as well as my DHCP server, and the guest network to connect to the web but again not my LAN, this is for users who come round with phones and tablets.
My lab look like this:-
Broadband > Cisco RVS4000 (soon to be ASA) > WS-C3560 > 1142 AP.
My DHCP server is on VLAN 6 with an IP address of 192.168.6.241
VLANs are: -
interface Vlan5
description *****DATA VLAN*****
ip address 192.168.5.253 255.255.255.240
ip helper-address 192.168.6.241
interface Vlan6
description *****Servers*****
ip address 192.168.6.254 255.255.255.240
interface Vlan7
description *****VOICE*****
ip address 192.168.7.254 255.255.255.240
ip helper-address 192.168.6.241
interface Vlan8
description *****VOICE WIFI*****
ip address 192.168.8.254 255.255.255.240
ip helper-address 192.168.6.241
interface Vlan9
description *****WIFI CONSOLES*****
ip address 192.168.9.254 255.255.255.240
ip helper-address 192.168.6.241
interface Vlan10
description *****WiFi Home*****
ip address 192.168.10.254 255.255.255.240
ip helper-address 192.168.6.241
interface Vlan11
description *****WiFi Guest*****
ip address 192.168.11.254 255.255.255.240
ip helper-address 192.168.6.241
interface Vlan12
description *****Management*****
ip address 192.168.12.254 255.255.255.240
The AP config looks like:
dot11 ssid Console
   vlan 9
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 094F4107170A051103
dot11 ssid Home
   vlan 10
   authentication open eap eap_methods
   authentication network-eap eap_methods
   guest-mode
   mbssid guest-mode
interface Dot11Radio0.9
encapsulation dot1Q 9
ip helper-address 192.168.6.241
no ip route-cache
bridge-group 9
bridge-group 9 subscriber-loop-control
bridge-group 9 block-unknown-source
no bridge-group 9 source-learning
no bridge-group 9 unicast-flooding
bridge-group 9 spanning-disabled
interface Dot11Radio0.10
encapsulation dot1Q 10
ip helper-address 192.168.6.241
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface Dot11Radio0.12
encapsulation dot1Q 12 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
At the minutes I’m just trying to stop Console getting to the Home network before I move onto the rest
I have not got a clue where to start or where to place the ACL’s, would they be on the Switch or the AP itself?
Hope you can help me out.
Happy new year
Martyn

Here is a suport document in regards to autonomous ACL:
https://supportforums.cisco.com/docs/DOC-13768
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Is it Possible to Create 13 DHCP pools in CISCO-WS-3750X-24S-S for 13 VLANS-1000 users?

Hi
Our Client has purchase the following products:
CISCO WS-3750X-24S-S Qnty: 1
CISCO WS-C2960X-48TS-L Qnty: 20
CISCO WS-C2960X-24TS-L Qnty: 6
CISCO AIR-CT2504-25-K9 Qnty: 1
CISCO AIR-CAP1602E-C-K9 Qnty: 23
Total LAN User: 812-820 and Wireless Users: 256-512.
Total No of VLANs = 13 (Including Wireless network and Management VLAN)
Client has no DHCP server and has decided to configure the Distribution Switch 3750 as DHCP server.
Can we configure 12 DHCP pools for LAN users and wireless users in the Cisco WS-3750X-24S-S switch?
Can It Handle the DHCP Load of the LAN users and Wireless users together?
The only thing I can do is to Move the Wireless DHCP in the Wireless LAN Controller.
Please suggest if configuring the 12 DHCP pool in the Distribution switch will be Appropriate for this network infrastructure.
If you have any other query please feel free to ask.

Can we configure 12 DHCP pools for LAN users and wireless users in the Cisco WS-3750X-24S-S switch?
I believe you can configure this much DHCP pools.
Can It Handle the DHCP Load of the LAN users and Wireless users together?
It can. DHCP is not CPU intensive. Plus you have lease time.
Besides, it's a small network. Should work. The main thing though is this: Why so many VLANs?
Downside is you don't have much features. You can't trace a MAC address from weeks ago. DHCP profiling is also not supported.

Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOA

Similar Messages

Maybe you are looking for